Managerial Economics and Finantial Accounting
Managerial Economics and Finantial Accounting
Managerial Economics and Finantial Accounting
Q1 Define Oligopoly?
Ans.- Oligopoly is a form of imperfect competition and is usually
described as the competition among a few. Hence, Oligopoly
exists when there are two to ten sellers in a market selling
homogeneous or differentiated products. A good example of an
Oligopoly is the cold drinks industry.
Q.2 Define Short period and explain price determination under it.
Ans.- Short Period: Refers to a time period in which the level of
supply of a particular product can be increased, but only as per
the production capacity of an organization. For example, an
organization can produce 50 mobile phones in a day. This is the
maximum production capacity of the organization.
Price Determination in Short Period: A short run refers to a period
in which organizations do not change their scale of production. In
this period, organizations neither exit the industry nor do new
organizations enter the industry. In this period, it is possible to
increase or decrease the supply of variable inputs. Thus, supply
curve is elastic in nature.
Figure-6 shows the price determination under short run:
1.
Generally, organizations have to select the level of output and
price that maximizes their profits.
In perfect competition, profit is maximized at the following
conditions:
1.MR=MC= Price
2. MC curve must be rising at the point of equilibrium.
In Figure-6 (a), the price determination for the industry is shown at
the intersection of demand and supply curves at price OP1 and
quantity OQ1. This price is fixed for all the organizations in the
industry. At price OP1, an organization has to adjust output to
maximize profit. In Figure-6 (b), the organization’s MR is shown
by MR=AR line. When the prevailing price in the market is P1, the
profit is maximized at point E, where MR= MC.
To determine how much profits are being made by the
organization, let us introduce AC curve in Figure-6(b). Profit is
equal to AR (price) minus AC. In Figure-6 (b), total profits equal
EF as AR equals ME and AC equals MF. Thus, area of profit
equals P1EFT. These are the super-normal profits earned by the
organization.
At this level of profits, there is a tendency for new organizations to
enter in the market. However, organizations cannot enter in short
run. The organizations in the industry will be at equilibrium at
point E, but industry as a whole will not be in equilibrium.
Q.3 Distinguish between monopoly and perfect competition.
Ans.- Following points make clear difference between both the
competitions:
1. Output and Price: Under perfect competition price is equal to
marginal cost at the equilibrium output. While under monopoly,
the price is greater than average cost.
2. Equilibrium: Under perfect competition equilibrium is possible
only when MR = MC and MC cuts the MR curve from below. But
under simple monopoly, equilibrium can be realized whether
marginal cost is rising, constant or falling.
3. Entry: Under perfect competition, there exist no restrictions on
the entry or exit of firms into the industry. Under simple monopoly,
there are strong barriers on the entry and exit of firms.
4. Discrimination: Under simple monopoly, a monopolist can
charge different prices from the different groups of buyers. But, in
the perfectly competitive market, it is absent by definition.
5. Profits: The difference between price and marginal cost under
monopoly results in super-normal profits to the monopolist. Under
perfect competition, a firm in the long run enjoys only normal
profits.
6. Supply Curve of Firm: Under perfect competition, supply curve
can be known. It is so because all firms can sell desired quantity
at the prevailing price. Moreover, there is no price discrimination.
Under monopoly, supply curve cannot be known. MC curve is not
the supply curve of the monopolist.
7. Slope of Demand Curve: Under perfect competition, demand
curve is perfectly elastic. It is due to the existence of large number
of firms. Price of the product is determined by the industry and
each firm has to accept that price. On the other hand, under
monopoly, average revenue curve slopes downward. AR and MR
curves are separate from each other. Price is determined by the
monopolist. It has been shown in Figure 10.
Maximum Loss: If the price fig. 2 falls to the level of AVC, the firm
will just cover its average variable cost, as shown in figure 2 (D). It
is indifferent whether to operate or close down because its losses
are the maximum.
It will pay such a firm to continue producing OQ4 output and incur
PE4GF losses rather than close down in the short-run. OQ4 is the
shutdown output because if the price falls below OP, the firm will
stop production. E4 is, therefore, the shutdown point.
Shut Down Stage: Figure 2. (E) shows a firm which is unable to
cover even its AVC at OQ0 level of output because the price OP
is below the AVC curve. It must shut down.
Thus in the short-run, there are firms which earn normal profits,
supernormal profits and incur losses.
(2) Total Cost-Total Revenue Analysis: The short-run equilibrium
of the firm can also he shown with the help of total cost and total
revenue curves. The firm is able to maximize its profits when the
positive difference between TR and TC is the greatest. This is
shown in Figure 3 where TR is the total revenue curve and TC the
total cost curve.
The total revenue curve is an upward sloping straight line curve
starting from O. This is because the firm sells small or large
quantities of its product at a constant price under perfect
competition. If the firm produces nothing, total revenue will be
zero The more it produces, the larger is the increase in total
revenue. Hence the TR curve is linear and slopes upward.
The firm will maximize its profits at that level of output where the
gap between the TR curve and the TC curve is the maximum.
Geometrically, it is that level at which the slope of a tangent
drawn to the total cost curve equals the slope of the total revenue
curve. In Figure 3, the maximum amount of profit is measured by
TP at OQ output.
At outputs smaller or larger than OQ between A and B points, the
firm’s profits shrink. If the firm produces OQ1 output, its losses
are the maximum because the TC curve is above the TR curve.
At Q1 its profits are zero.
This is the break-even point of the firm. It starts earning profits
when it produces beyond OQ1 output level. At OQ2 level, its
profits are again zero. If it produces beyond this level, it incurs
losses because TC > TR.
Long-Run Equilibrium of the Firm: The long run is a period of time
in which the firm can change its plant and scale of operations.
Thus in the long-run all costs are variable and there are no fixed
costs. The firm is in the long-run equilibrium under perfect
competition when it does not want to change its equilibrium
output.
It is earning normal profits. If some firms are earning supernormal
profits, new firms will enter the industry and supernormal profits
will be competed away. If some firms are incurring losses, some
of the firms will leave the industry till all earn normal profits.
Thus there is no tendency for firms to enter or leave the industry
because every firm must earn normal profits. “In the long-run,
firms are in equilibrium when they have adjusted their plant so as
to produce at the minimum point of their long-run AC curve, which
is tangent (at this point) to the demand (AR) curve defined by the
market price” so that they earn normal profits.
Assumptions:
This analysis is based on the following assumptions:
1. Firms are free to enter into or leave the industry.
2. All firms are of equal efficiency.
3. All factors are homogenous. They can be obtained at constant
and uniform prices. SMC
4. Cost curves of firms are uniform.
5. The plants of firms are equal, having given technology.
6. All firms have perfect knowledge about price and output.
Given these assumptions, each firm of the industry will be in long-
run equilibrium when it fulfils the following two conditions.
(1) In equilibrium, its short-run marginal cost (SMC) must equal to
its long-run marginal cost (LMC) as well as its short-run average
cost (SAC) and its long-run average cost (LAC) and both should
equal MR=AR=P.
Thus the first equilibrium condition is:
SMC = LMC = MR = AR = P = SAC = LAC at its minimum point,
and
(2) LMC curve must cut MR curve from below: Both these
conditions of equilibrium are satisfied at point E in Figure 5 where
SMC and LMC curves cut from below SAC and LAC curves at
their minimum point E and SMC and LMC curves cut AR = MR
curve from below. All curves meet at this point E and the firm
produces OQ optimum output and sells it at OP price.
Since we assume equal costs of all the firms of industry, all firms
will be in equilibrium in the long-run. At OP price a firm will have
neither a tendency to neither leave nor enter the industry and all
firms will earn normal profits.
Q.8 Same as Q.3
Q.9 Give any two characteristics of market?
Ans. - Essential characteristics of a market are as follows:
1. One commodity: In practical life, a market is understood as a
place where commodities are bought and sold at retail or
wholesale price, but in economics “Market” does not refer to a
particular place as such but it refers to a market for a commodity
or commodities i.e., a wheat market, a tea market or a gold
market and so on.
2. Area: In economics, market does not refer only to a fixed
location. It refers to the whole area or region of operation of
demand and supply.
Q.10 Point out any two factors which affect the extent of a market.
Ans. - 1. Nature of Demand: The extent of the market is greatly
influenced by the nature of the demand of the commodity.
The commodities like silver, gold etc. having permanent demand
would have a larger size of the market. On the contrary, if the
demand is limited to a particular area then it would have the small
size of the market.
2. Means of Transportation and Communication: Means of
transportation and communication determine the extent of the
market. If the means of transportation and communication are
well developed, wide contacts can be easily established.