Controller DULCOMETER® Compact
Compact yet fully equipped - the basic water analysis unit
The DULCOMETER® Compact controller is a one-channel be used as an alarm or limit value or to control motor-driven
PID controller for the measured variables pH, ORP, chlorine metering pumps or solenoid valves. A digital input is used
and inductive conductivity. It can monodirectionally control to switch off the control or to process a sample water limit
the measured variable, monitor limit values and transmit contact by remote control. The impact of temperature
the measured value via an mA output, e.g. to a PLC. The on the measurements can be provided by temperature
mA output can optionally also be configured as a controlled measurement or by manual input. Menu-driven operation is
variable output. The controller has one pulse frequency output language-independent.
to control one metering pump. One output relay can optionally
Your benefits
■ Flexibility in the choice of measured variable with pH and ■ Safety through sensor monitoring of pH for glass breakage
ORP and line breakage
■ Always the optimum measured value resolution by auto- ■ Various installation options: wall-mounted, installation on
ranging with conductivity measurement an upright or in a control cabinet
■ Depending on the requirement, various display options for
conductivity, such as: Conductivity, TDS (Total Dissolved
Solids), salinity and specific resistance
Field of application
■ Measurement and control of water parameters in industrial
and process water treatment plants
■ Permeate monitoring in reverse osmosis systems
■ Measurement and control of the hygiene parameters in
swimming pools
Printed in Germany, 1-4-2020.
www.prominent.com
Controller DULCOMETER® Compact
Compact yet fully equipped - the basic water analysis unit
Technical Data
Measuring range pH: 0 ... 14
ORP: -1000 ... +1000 mV
Chlorine: 0.05 ... 5 ppm, intermittent metering up to 10 ppm, max. 12 h
Conductive conductivity: 0.5 µS/cm ... 20 mS/cm (auto-ranging)
Inductive conductivity with ICT 1: 200 µS/cm ... 1000 mS/cm (auto-ranging)
Inductive conductivity with ICT 2: 20 µS/cm ... 2000 mS/cm (auto-ranging)
Inductive conductivity with ICT 5: 200 μS/cm ... 2000 mS/cm (auto-ranging)
Resolution pH: 0.01 pH
ORP: 1 mV
Chlorine: 0.01 ppm
Conductivity: 0.1 µS/cm (depends on the measuring range)
Accuracy 0.5% of the upper range value
Temperature compensation range 0 ... 120 °C, chlorine 1 ... 45 °C
Control Monodirectional PID control with selectable control direction
Inputs Sensor input for the relevant measured variable
Temperature sensor input: pH: Pt 1000, chlorine and conductivity: Pt 100/ Pt 1000
1 digital input as a remote control input for the functions pause control / sample water fault
Outputs 1 pulse frequency output for the control of metering pumps
1 active 0/4…20 mA output configurable as a measured or control variable, max. load: 400 Ω
1 output relay used as a changeover contact, can be configured as an alarm, limit value or
pulse width-modulated control output for motor-driven metering pumps
Cell constant, conductive 0.05 ... 12.0 cm-1
conductivity
Voltage supply 100 ... 230 V, 50/60 Hz, 5 W
Permissible operating temperature -10 ... +60 °C
Enclosure rating IP 67, based on NEMA 4 X Indoor
Dimensions 135 x 125 x 75 mm (H x W x D)
Weight 0.5 kg
Printed in Germany, 1-4-2020.
ProMinent Group
[email protected] www.prominent.com
