TECHNICAL DATA SHEET

PRODUCT CATALOGUE
Austenitic Lean Duplex
Break press- made tubes Flat bars
Ferritic Value-adding Services
GENERAL INFORMATION

CHEMICAL COMPOSITION
Austenitic
(FULFILS THE STANDARDS ASTM A 554-08 AND EN 10088-2)
EN MT C %, Mn %, P %, Ni % Cr % Mo % Ti %
max max max
1.4301 304 0.07 2.00 0.04 8.0-10.5 18.0-19.5 - -
1.4307 304L 0.03 2.00 0.04 8.0-10.5 18.0-19.5 - -
1.4404 316L 0.03 2.00 0.04 10.0-13.0 16.5-18.0 2.0-2.5 -
1.4571 316Ti (*) 0.08 2.00 0.045 10.0-13.5 16.5-18.0 2.0-2.5 5x(C+N)-0.7
For all grades S max 0.015, Si max 0.75 and N max 0.10
* Fulfils the standards A240-06b and EN 10088-2

Ferritic
EN UNS C% Mn % P% Ni % Cr % Si % S % max N%
max max max max max
1.4003 S40977 0.03 1.50 0.04 0.3-1.0 10.5-12.5 1.00 0.015 0.03

Lean Duplex
EN UNS C% Mn % P% Ni % Cr % Mo % Si % max S% N% Cu %
max max max
1.4162 S32101 0.04 4.0-6.0 0.04 1.35-1.70 21.0 0.1-0.8 1.00 0.03 0.2-0.25 0.1-0.8
-22.0

Also other Duplex grades may be possible on request

MECHANICAL PROPERTIES
(MEASURED FROM COIL ACCORDING TO EN 10088-2)
EN MT or UNS Yield strenght Tensile strength Elongation
Rp0.2 min Rm min min
N/mm² (ksi) N/mm² (ksi) %
Austenitic
1.4301 304 230 (33) 540 (78) 45
1.4307 304L 220 (32) 520 (75) 45
1.4404 316L 240 (34) 530 (76) 40
1.4571 316Ti 240 (34) 540 (76) 40
Ferritic
1.4003 S40977 320 (46) 450 (65) 20
Lean Duplex
1.4162 S32101 480 (70) 680 (98) 30

INSPECTION CERTIFICATE
EN 10204 – 3.1

We reserve the right to changes. Stalatube takes no responsibility for

any error in numerical information that might appear in this brochure.

Latest version www.stalatube.com/pdf downloads

-2 -
Table of contents

General information page nr 2

Hollow sections 4
- Austenitic metric 4-6
- Austenitic imperial 7-8
- Break press- made tubes, Austenitic 10
- Ferritic 11
- Lean Duplex 12
Flat bars 14
Value-adding Services 15
- Cut to length service 15
- Polishing 15
- Pickling 15
- Laser cutting 15

-3 -
Austenitic metric STAINLESS STEEL HOLLOW SECTIONS
- TECHNICAL INFORMATION
(1.4301, 1.4307, 1.4404, 1.4571)

DELIVERY CONDITION SURFACE CONDITION

Forming Cold formed (roll formed) Brushed (Stalazzo), when tube dimension is ≤ 100x100x6 mm
Welding process TIG/Plasma, Laser or HF As welded (unpol), when tube dimension is > 100x100x6 mm
Weld condition External weld bead removed

TUBE MARKING
Ink-jet marking on tube Stalatube Oy made in Finland, steel grade, dimensions, coil number, production week/year, welding operator
Bundle tag Dimensions, steel grade, surface condition, bundle size, batch id, coil number, bundle number

SQUARE Weight [kg/m]

H x B [mm] 1.2 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0
20 20 0.729 0.901 1.176
25 25 0.921 1.140 1.495 2.167
30 30 1.112 1.379 1.814 2.645
32 32 1.189 1.475 1.941 2.837
35 35 1.304 1.618 2.133 3.124
38 38 1.418 1.762 2.324 3.411
40 40 1.495 1.858 2.452 3.602 4.703
45 45 2.097 2.771 4.081 5.341
50 50 2.336 3.090 4.559 5.979 7.349
60 60 2.814 3.728 5.516 7.255 8.943 10.582
70 70 4.366 6.473 8.531 10.538 12.496
75 75 4.685 6.952 9.169 11.336 13.453
80 80 5.004 7.430 9.807 12.133 14.410
90 90 5.641 8.387 11.083 13.728 16.324
100 100 6.279 9.344 12.359 15.323 18.237 23.916
120 120 11.258 14.910 18.513 22.065 29.020
140 140 13.172 17.462 21.703 25.893 34.123
150 150 14.129 18.738 23.298 27.807 36.675 45.343
200 200 18.913 25.118 31.272 37.376 49.434 61.292 72.950
220 220 27.670 34.462 41.204 54.538 67.672 80.605
250 250 39.247 46.946 62.194 77.241 92.089
300 300 47.221 56.515 74.953 93.190 111.227

Latest version www.stalatube.com/pdf downloads

-4 -
RECTANGULAR Weight [kg/m]
H x B [mm] 1.2 1.5 2.0 3.0 4.0 5.0 6.0 8.0 10.0 12.0
30 20 0.921 1.140 1.495
35 25 1.112 1.379 1.814 2.645
40 10 0.921 1.140 1.495
40 20 1.112 1.379 1.814 2.645
40 25 1.208 1.499 1.973 2.885
40 30 1.304 1.618 2.133 3.124
50 10 1.112 1.379 1.814
50 20 1.304 1.618 2.133 3.124
50 25 1.399 1.738 2.292 3.363
50 30 1.495 1.858 2.452 3.602
50 40 2.097 2.771 4.081
60 10 1.618 2.133
60 20 1.858 2.452 3.602
60 30 2.097 2.771 4.081
60 40 2.336 3.090 4.559 5.979
70 50 2.814 3.728 5.516 7.255 8.943
80 10 2.097 2.771
80 20 2.336 3.090 4.559
80 30 2.575 3.409 5.038
80 40 2.814 3.728 5.516 7.255 8.943
80 50 4.047 5.995 7.893 9.741
80 60 4.366 6.473 8.531 10.538
100 20 2.814 3.728 5.516
100 30 3.054 4.047 5.995
100 40 4.366 6.473 8.531 10.538
100 50 4.685 6.952 9.169 11.336 13.453
100 60 5.004 7.430 9.807 12.133 14.410
100 80 5.641 8.387 11.083 13.728 16.324
120 40 5.004 7.430 9.807
120 60 5.641 8.387 11.083 13.728 16.324
120 80 6.279 9.344 12.359 15.323 18.237
120 100 10.301 13.635 16.918 20.151
140 80 10.301 13.635 16.918 20.151
150 50 9.344 12.359 15.323 18.237
150 100 11.736 15.548 19.310 23.022 30.296
160 80 11.258 14.910 18.513 22.065
200 100 14.129 18.738 23.298 27.807 36.675
250 100 16.521 21.928 27.285 32.592 43.055
250 150 18.913 25.118 31.272 37.376 49.434 61.292
300 100 18.913 25.118 31.272 37.376 49.434
300 200 39.247 46.946 62.194 77.241 92.089
400 200 47.221 56.515 74.953 93.190 111.227

Also other dimensions may be possible on request.

-5 -
TOLERANCES (according to EN 10219-2) PACKING:
Characteristic Tolerance Plastic bands
Outside dimensions, B and H ± 1 %, with a minimum of ± 0.5 mm, when B, H < 100 mm Bundle tags
± 0.8 %, when 100 mm ≤ B, H ≤ 200 mm
± 0.6 %, when B, H > 200 mm Plastic foil

Concavity / Convexity Max. 0.8 % with a minimum of 0.5 mm

Wall thickness, T ± 10 %, when T ≤ 5 mm
± 0.5 mm, when T > 5 mm
Squareness of sides 90º ± 1º
External corner Maximum 1.5T, when T ≤ 3 mm and B,H ≤ 100mm
profile, C1, C2 or R(1) 1.6T - 2.4T, when T > 3 mm and B,H ≤ 100mm
2T – 3T, when T ≤ 4 mm and B,H > 100mm
1.6T – 2.4T, when T > 4mm and B,H > 100mm
Length, L Standard length 6 m, tolerance 0/+20 mm (1)
Straightness 0.15 % of total length
Twist 2 mm + 0.5 mm/m
(1) Exception from standard

C¹ 5ª
T
C²

B
5ª

B,H

X² X¹

ª This dimension is maximun when measuring B or H

and minimun when measuring T

Latest version www.stalatube.com/pdf downloads

-6 -
Austenitic imperial STAINLESS STEEL HOLLOW SECTIONS
- TECHNICAL INFORMATION
(304, 304L, 316L, 316Ti)

DELIVERY CONDITION TUBE MARKING

Forming Cold formed (roll formed) Ink-jet marking on Stalatube Oy made in Finland, steel grade, dimen-
tube sions, coil number, production week/year, welding
Welding process TIG/Plasma, Laser or HF operator
Weld condition External weld bead removed Bundle tag Dimensions, steel grade, surface condition, bundle
size, batch id, coil number, bundle number
Surface quality As welded (unpol)

SQUARE Weight [lb/ft]

H x B [inch] .060 .080 .120 .180 .250 .312 .375 .500
1 1 0.779 1.022 1.483
1.25 1.25 0.985 1.297 1.895
1.5 1.5 1.188 1.567 2.300 3.336
2 2 1.596 2.112 3.117 4.562 5.931
2.5 2.5 2.005 2.656 3.934 5.788 7.565
3 3 3.201 4.751 7.013 9.200
3.5 3.5 5.568 8.239 10.834
4 4 6.386 9.465 12.468 16.355 20.107
5 5 8.020 11.916 15.737 20.713 25.555
6 6 9.654 14.368 19.005 25.071 31.002 36.799
8 8 12.923 19.271 25.543 33.787 41.897 49.873
10 10 24.173 32.080 42.504 52.793 62.947
12 12 29.076 38.617 51.220 63.688 76.022

RECTANGULAR Weight [lb/ft]

H x B [inch] .060 .080 .120 .180 .250 .312 .375 .500
1.5 1 0.985 1.297 1.895
2 1 1.188 1.567 2.300
2 1.5 1.392 1.839 2.708
3 1 1.596 2.112 3.117
3 1.5 1.801 2.384 3.526
3 2 2.656 3.934 5.788 7.565
4 2 3.201 4.751 7.013 9.200
4 3 5.568 8.239 10.834
5 2 5.568 8.239 10.834
5 3 6.386 9.465 12.468
6 2 6.386 9.465 12.468
6 3 7.203 10.691 14.103
6 4 8.020 11.916 15.737 20.713 25.555
8 2 8.020 11.916 15.737
8 4 9.654 14.368 19.005 25.071 31.002
8 6 11.289 16.819 22.274 29.429 36.450 43.336
10 4 11.289 16.819 22.274 29.429 36.450
10 6 12.923 19.271 25.543 33.787 41.897 49.873
10 8 21.722 28.811 38.145 47.345 56.410
12 4 19.271 25.543 33.787 41.897
12 6 21.722 28.811 38.145 47.345
12 8 24.173 32.080 42.504 52.793 62.947
12 10 26.625 35.348 46.862 58.240 69.484
14 6 24.173 32.080 42.504 52.793 62.947
14 8 26.625 35.348 46.862 58.240 69.484
14 10 29.076 38.617 51.220 63.688 76.022
16 8 29.076 38.617 51.220 63.688 76.022

-7 -
TOLERANCES (according to ASTM A554-08a)
External dimensions h,b in. (mm) 
to 1 1/4 (31.8) +/- 0.0015” (0.38mm)
Over 1 1/4 to 2 ½ (31.8 to 63.5) +/- 0.020” (0.51mm)
Over 2 ½ to 5 ½ (63.5 to 139.7) +/- 0.030” (0.76mm)
Over 5 ½ to 8 (139.7 to 203.2) +/- 0.060” (1.52mm)
Over 8* (203.2) +/- 0.8 % x side length

Thickness +/- 10%

Squareness 0.006 x longest side
Concavity/convexity Included to external dimensions

External corner radius in. (mm) Radii of corners Max in. (mm)
Over 0.020 to 0.049 (0.51 to 1.24) 3/32 (2.4)
Over 0.049 to 0.065 (1.24 to 1.65) 1/8 (3.2)
Over 0.065 to 0.083 (1.65 to 2.11) 9/64 (3.6)
Over 0.083 to 0.095 (2.11 to 2.44) 3/16 (4.8)
Over 0.095 to 0.109 (2.44 to 2.77) 13/64 (5.2)
Over 0.109 to 0.134 (2.77 to 3.40) 7/32 (5.6) 1) or 2T - 3T)2)
Over 0.134 to 0.156 (4.30 to 3.96) 1/4 (6.4) 1) or 2T - 3T)2)
Over 0.156 to 0.200 (3.96 to 5.08) 3/8 (9.5) 1) or 2T - 3T)2)
Over 0.200 to 0.250 (5.08 to 6.35) 1/2 (12.7)
Over 0.250 to 0.375 (6.35 to 9.53) 3/4 (19.1)
Exception from standard
1) when T ≤ 0.134” and B,H ≤ 4” (101.6mm)
2) when T ≤ 0.200“ and B,H > 4“ (101.6mm) 

Twist (Largest size, in. (mm)) C¹ 5ª

Twist in 3 feet, max, in. (mm/m)

T
C²

Under 1/2 (12.7) 0.050 (1.4)

1/2 to 1 1/2 (12.7 to 38.1) incl. 0.075 (2.1)
Over 1 1/2 to 2 1/2 (38.1 to 63.5) incl. 0.095 (2.6) B
5ª

Over 2 1/2 to 4 (63.5 to 101.6) incl. 0.125 (3.5)

B,H

Over 4 to 6 (101.6 to 152.4) 0.250 (6.9)

Over 6 (152.4) 0.375 (10.4)

Standard length 20’ (6.1m)

Length tolerance (not acc.ASTM A554-08) -0”/+ 0.78”(-0mm/+20mm)
X² X¹
* Not included in ASTM A554

ª This dimension is maximun when measuring B or H

and minimun when measuring T

PACKING:
Plastic bands
Bundle tags
Corner protection
Plastic foil

Latest version www.stalatube.com/pdf downloads

-8 -
-9 -
Break Press Tubes STAINLESS STEEL HOLLOW SECTIONS
- TECHNICAL INFORMATION
Austenic (1.4301, 1.4307, 1.4404, 1.4571)

DELIVERY CONDITIONS
Manufacturing process Break press, made of two U or J profiles
Welding process Laser
Surface condition As welded (unpol) and pickled

TUBE MARKING
Marking on tube Heat number
Bundle tag Dimensions, steel grade, surface condition, bundle size, batch
id, heat number, bundle number

DIMENSION TABLE
 Wall thickness Metric Imperial
min max example min max example
3 mm perimeter 400 800 150x50 - 200x200 mm 16” 32” 6”x2” - 8”x8”
(0.120”) side dimension 50 300 2” 12”
relation of sides 1/3 1/1 1/3 1/1
4-5 mm perimeter 300 1200 80x50 - 300x300 mm 12” 48” 4”x2” - 12”x12”
(0.180”) side dimension 50 400 2” 16”
relation of sides 1/4 1/1 1/4 1/1
6 mm perimeter 400 2400 150x50 - 600x600 mm 16” 96” 6”x2” - 24”x24”
(0.250”) side dimension 50 800 2” 32”
relation of sides 1/5 1/1 1/5 1/1
8 mm perimeter 500 3200 170x80 - 800x800 mm 20” 128” 7”x4” - 32”x32”
(0.312”) side dimension 80 1000 4” 40”
relation of sides 1/5 1/1 1/5 1/1
10 mm perimeter 600 4000 200x100 - 1000x1000 mm 24” 156” 8”x4” - 39”x39”
(0.375”) side dimension 100 1000 4” 40”
relation of sides 1/5 1/1 1/5 1/1
Also other dimensions may be possible on request.

TOLERANCES
Characteristic Tolerance
Outside dimensions, B and H ± 0.8 %
Concavity / Convexity Included to external dimensions
Wall thickness, T ± 10 %
Squareness of sides 90º ± 1º
External corner profile, C1, C2 Maximum 4xT
Length 0/+10 mm
Straightness 1 mm/m
Twist 2 mm + 0.5 mm/m

PACKING:
Plastic bands
Bundle tags
Corner protection

Latest version www.stalatube.com/pdf downloads

- 10 -
Ferritic (1.4003) STAINLESS STEEL HOLLOW SECTIONS
- TECHNICAL INFORMATION

DELIVERY CONDITION TUBE MARKING

Forming Cold formed (roll formed) Ink-jet marking Stalatube Oy made in Finland, steel grade, dimensions,
on tube coil number, production week/year, welding operator
Welding process Laser or HF
Bundle tag Dimensions, steel grade, surface condition, bundle size,
Weld condition External weld bead removed batch id, coil number, bundle number
Surface condition As welded (unpol)

SQUARE Weight [kg/m] RECTANGULAR Weight [kg/m]

H x B [mm] 1.5 2.0 3.0 4.0 H x B [mm] 1.5 2.0 3.0 4.0
25 25 1.04 1.34 30 20 1.04 1.34
30 30 1.27 1.65 2.32 40 20 1.27 1.65
35 35 1.50 1.95 2.78 40 30 1.50 1.95 2.78
38 38 1.64 2.14 3.06 50 20 1.50 1.95
40 40 1.73 2.26 3.24 50 30 1.73 2.26 3.24
50 50 2.20 2.88 4.16 5.35 50 40 1.97 2.57 3.70
60 60 3.49 5.09 6.58 60 20 1.73 2.26
70 70 4.11 6.01 7.81 60 30 1.97 2.57 3.70
75 75 4.42 6.47 8.43 60 40 2.20 2.88 4.16 5.35
80 80 4.73 6.94 9.05 70 50 3.49 5.09 6.58
100 100 8.78 11.51 80 40 3.49 5.09 6.58
80 60 4.11 6.01 7.81
100 40 4.11 6.01 7.81
100 50 4.42 6.47 8.43
100 60 4.73 6.94 9.05
120 40 4.73 6.94 9.05
120 80 8.78 11.51

TOLERANCES (according to EN 10219-2)

C¹ 5ª
Characteristic Tolerance
T
C²

Outside dimensions, ± 1 %, with minimum of ± 0.5 mm,

B and H when B, H < 100 mm.
± 0.8 %, when B, H ≥ 100 mm
Concavity / Convexity Max. 0.8 % with minimum of 0.5 mm B
5ª

Wall thickness, T ± 10 %
Squareness of side 90º ± 1º
B,H

External corner profile 1.6T - 2.4T

(C1, C2 or R)
Length Standard length 6 m, tolerance 0/+20 mm (1)
Straightness 0.15 % of total length
Twist 2 mm + 0.5 mm/m
X² X¹
(1) Exception from standard

ª This dimension is maximun when measuring B or H

and minimun when measuring T

- 11 -
Lean Duplex (1.4162) STAINLESS STEEL HOLLOW SECTIONS
- TECHNICAL INFORMATION

DELIVERY CONDITION TUBE MARKING

Forming Cold formed (roll formed) Ink-jet marking on tube Stalatube Oy made in Finland, steel grade, dimensions,
coil number, production week/year, welding operator
Welding process TIG/Plasma, Laser or HF
Bundle tag Dimensions, steel grade, surface condition, bundle size,
Weld condition External weld bead removed batch id, coil number, bundle number

SQUARE Weight [kg/m] SURFACE CONDITION

H x B [mm] 1.5 2.0 2.5 3.0 4.0 5.0 6.0 Brushed (Stalazzo), when tube dimension is ≤
100x100x6 mm
25 25 1.111
As welded (unpol), when tube dimension is >
30 30 1.345 1.768 100x100x6 mm
32 32 1.438 1.893
35 35 1.578 2.079
PACKING:
38 38 1.718 2.266
Plastic bands
40 40 1.811 2.390 2.957
Bundle tags
50 50 2.278 3.012 3.735
Plastic foil
60 60 2.744 3.634 4.513 5.378 7.074
70 70 4.256 5.290 6.311 8.318
TOLERANCES (according to EN 10219-2)
75 75 4.567 5.679 6.778 8.940
Characteristic Tolerance
80 80 4.878 6.068 7.244 9.562
Outside ± 1 %, with minimum of ± 0.5 mm,
100 100 7.623 9.110 12.050 14.940 17.781 dimensions, when B, H < 100 mm.
B and H ± 0.8 %, when B, H ≥ 100 mm
120 120 10.977 14.538 18.050 21.514
Concavity / Max. 0.8 % with minimum of 0.5 mm
150 150 13.776 18.270 22.715 27.112 Convexity
200 200 24.490 30.490 36.442 Wall thick- ± 10 %
ness, T
250 250 30.710 38.265 45.772
Squareness 90º ± 1º
300 300 36.930 46.041 55.102 of side
External 1.6T - 2.4T, when T > 3 mm
RECTANGULAR Weight [kg/m] corner and B,H ≤ 100mm
profile, C1, 2T – 3T, when T ≤ 4 mm
 H x B [mm] 1.5 2.0 2.5 3.0 4.0 5.0 6.0 C2 or R(1) and B,H > 100mm
30 20 1.111 1.6T – 2.4T, when T > 4mm
and B,H > 100mm
40 20 1.345 1.768
Length Standard length 6 m, tolerance
40 30 1.578 2.079 0/+20 mm (1)
50 20 1.578 2.079 Straightness 0.15 % of total length
50 25 1.694 2.235 Twist 2 mm + 0.5 mm/m
50 30 1.811 2.390 (1) Exception from standard
50 40 2.044 2.701
60 20 1.811 2.390 C¹ 5ª
60 30 2.044 2.701
T
C²

60 40 2.278 3.012 3.735

70 50 2.744 3.634 4.513 5.378
80 40 2.744 3.634 4.513 5.378 7.074 B
5ª

80 60 4.256 5.290 6.311 8.318

100 40 4.256 5.290 6.311 8.318
B,H

100 50 4.567 5.679 6.778 8.940

100 60 4.878 6.068 7.244 9.562
120 40 4.878 6.068 7.244 9.562
150 100 11.443 15.160 18.828
200 100 13.776 18.270 22.715 27.112 X² X¹
250 150 18.441 24.490 30.490 36.442
300 100 18.441 24.490 30.490 36.442 ª This dimension is maximun when measuring B or H
and minimun when measuring T
300 200 30.710 38.265 45.772
400 200 36.930 46.041 55.102

Latest version www.stalatube.com/pdf downloads

- 12 -
- 13 -
Flat Bars STAINLESS STEEL FLAT BARS
- TECHNICAL INFORMATION

DELIVERY CONDITIONS MARKING ON PRODUCTS

Forming Slitted, straightened, rolled edges Ink-jet marking Heat number
Surface condition Hot rolled (1D) as standard

FLAT BARS Weight [kg/m] ADDITIONAL CERTIFICATE:

Width [mm] 3.0 4.0 5.0 6.0 8.0 PED 97/23/EC
30 0.72 0.96 1.2 1.44 1.92
40 0.96 1.28 1.60 1.92 2.56 PACKING:
50 1.20 1.60 2.00 2.40 3.20 Wood crates
60 1.44 1.92 2.40 2.88 3.84 Plastic bands
80 1.92 2.56 3.20 3.84 5.12 Bundle tag
100 2.40 3.20 4.00 4.80 6.40
120 4.80 5.76 7.68
150 6.00 7.20 9.60

STEEL GRADES:
(According to standards EN 10088-2 / EN 10028-7 / ASTM A240)
1.4301 / 304
1.4307 / 304L
1.4404 / 316L
1.4571 / 316Ti

TOLERANCES: (According to EN 10058)

Dimensions in mm
Width b Nominal Width Limit deviation ª
10 ≤ b ≤ 40 ± 0.75
40 < b ≤ 80 ±1
80 < b ≤ 100 ± 1.5
100 < b ≤ 120 ±2
120 < b ≤ 150 ± 2.5
Thickness t Nominal thickness Limit deviation ª
t ≤ 20 ± 0.5
Straightness q Nominal cross-section Tolerance in the plane of b
< 1 000 mm² q ≤ 0.4 % of L
≥ 1 000 mm² q ≤ 0.25 % of L
Lenght: L=4000mm as standard (tolerance -0/+20mm)
ª When ordering, the total ranges for permissible deviations may, L
by agreement, be entirely on the plus side.

Latest version www.stalatube.com/pdf downloads

- 14 -
Value-adding services

CUTTING ACCORDING TO CUSTOMER’S SPECIFICATION

Cut to length service 4-18 m, tolerance -0/+20mm
Precise cutting 20-9000 mm, tolerance ± 1 mm
≥ 9000mm, tolerance depends on the lenght
Angle cutting 30-90º, tolerance 1 º
Laser cutting Tolerances according to customer’s drawing

OPTIONAL SURFACE TREATMENTS

Polishing Ra
Grit 180 1.5 - 1.9
Grit 220/240 1.0 - 1.4
Grit 320 0.6 - 0.9
Grit 400 <0.5
Marking on order
Corner polishing on order
Tubes are single packed
Bundles are packed with plastic foil, plastic bands and corner protections

PICKLING
Dip pickling
Bundles are packed with plastic cover, plastic bands and corner protections

HIGH STRENGTH CLASS (STALA 350)

UP TO THICKNESS 6 mm (0.250”)
MEASURED FROM TUBE IN LONGITUDINAL DIRECTION
Yield strenght Tensile strength Elongation
Rp0.2 min Rm min A5 min
N/ mm² (ksi) N/mm² (ksi) %
Available for austenitic grades 350 (50) 600 (87) 30

- 15 -
 Stalatube Oy Stalatube BV Stalatube INC. Stalatube India c/o SLP INOX
Finland, Taivalkatu 7 The Netherlands, Touwslagerij 13 United States PA 19010-0210 A-Wing Lev. 4, Dynasty Business Park
FI-15170 Lahti NL - 4762 AT Zevenbergen P.O. Box 210 Bryn Mawr Andheri - Kurla Road, Andheri - East
Tel. +358 (0)3 882 190 Tel. +31 (0)168 325 777 Tel. +1 (0)610 525 7706 Mumbai – 400059 India
www.stalatube.com Fax +358 (0)3 882 1914 Fax +31 (0)168 325 778 Fax +1 (0)610 525 5717 Tel. +91 22 4030 9250 Fax 4030 9199

A GROWING BUSINESS
Stalatube is known worldwide as the manufacturer of diverse and highly de-
veloped stainless steel hollow sections. During our 40 years in the business
we have built an international distribution network, covering all continents
and 45 countries. The head office is in Lahti, Finland, and our sales offices
are located in the United States, the Netherlands and India. To help you stay
competitive, we provide cutting-edge technology, over 600 products and a
full range of services.

02/2011/Markprint