Scribd
Upload
25 views3 pages

EELA-1110 Principles of Electronics Engineering Home Assignment-1 Submission Guideline

This document provides the problems for Home Assignment-1 of the course EELA-1110 Principles of Electronics Engineering. It includes 10 problems related to circuit analysis involving diodes, transistors, and other circuit elements. Students are instructed to show all work on paper, scan it, save it as a PDF file with their name and problem number, and submit it by April 29, 2020.

Uploaded by

interlocutor1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views3 pages

EELA-1110 Principles of Electronics Engineering Home Assignment-1 Submission Guideline

This document provides the problems for Home Assignment-1 of the course EELA-1110 Principles of Electronics Engineering. It includes 10 problems related to circuit analysis involving diodes, transistors, and other circuit elements. Students are instructed to show all work on paper, scan it, save it as a PDF file with their name and problem number, and submit it by April 29, 2020.

Uploaded by

interlocutor1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EELA-1110

PRINCIPLES OF ELECTRONICS ENGINEERING

Home Assignment-1

Submission Guideline:
• Last Date of Submission: April 29, 2020
• Solve all the problem by following all the steps on preferably A4 size white paper. Scan
it and save as PDF. MUST CHANGE the file name before uploading as Class Sr
No._First Name, e.g. 00_Abdullah
• Also mention your detail on the top of your assignment pdf
• For uploading your assignment PDF: Click Here

1. For the given circuit cutin voltage of diode is VT=0.7V. What is the value of v and i.

2. Assume that in the given circuit diodes are ideal. What is the value of currents ID1 and ID2.

3. Determine the current in the network.

4. For the given rectifier circuit and its input waveform find out the out waveform, assume the
diode to be ideal.
5. Analysis the circuit shown below, and calculate the current in the diodes D1 and D2. Assume
Si diodes.

6. Let the cut-in voltage equal to 0.7V for each diode in the circuit shown below. What is the
voltage V0.

7. Calculate β for two transistors for which α = 0.99 and 0.98. For collector currents of 10 mA,
find the base current of each transistor.
8. In the circuit shown below, the voltage at the emitter was measured and found to be –0.7 V. If
β = 50, find IE, IB, IC, and VC.
9. Determine all the node voltage and branch current for the circuit by assuming β=100 and
VBE=0.6

10. Analyse the circuit to determine the voltages at all nodes and the currents in all branches.
Assume β = 100.

You might also like