Friendess CypOne Laser Cutting Control Software

Software version: 6.1.723

Document version: V1.1

 Friendess CypOne Laser Cutting Control Software 1

Welcome
Thank you for using CypOne laser cutting control Software!

CypOne software is designed for fiber laser sheet cutting machine. It integrates
functions of laser technique, parts nesting and CNC control etc. Main function
features consist of drawing processing, parameter setup, process customizing, parts

nesting, tool path planning and simulating, and cutting process controlling etc.

CypOne has to work with control card to realize machining control.

It will run as demo mode in the computer without control card, while users still
can operate most of the functions except machine control. You can modify drawing,
edit toolpath and other designs on your laptop in the office, send file to machine for

cutting.

This manual only contains operation descriptions for CypOne main program, for
CypOne config tool and other programs work with CypOne please refer to related
manual or contact our support.

The document is based on CypOne 6.1.723, there will be difference in later

version-ups.

If you have any question or advice in usage of our products, welcome to contact
us by email [email protected].
Friendess CypOne Laser Cutting Control Software 2

The working and cutting performance of the machine are

directly related to the material, laser, cutting gas, gas pressure
and the parameters setup. Please be cautious in parameter
setting!

Improper parameter setting and operation may reduce the

cutting performance, or even cause damage and injury to
machine parts and human body. CypOne software has already
designed multiple protections, meanwhile manufactures and
users must follow the safety operation rules in case of any
accidents and injuries.
 Friendess CypOne Laser Cutting Control Software 2

Content
Welcome ..........................................................................................................................................1

1. Quick Start ..............................................................................................................................6

1.1 Function Features .............................................................................................................6

1.2 Access, Update and Install Software...............................................................................7

1.3 Start Operation .................................................................................................................8

1.3.1 Desktop Shortcut ..................................................................................................8

1.3.2 User Interface ........................................................................................................9

1.3.3 Menu Bar .............................................................................................................11

1.3.4 File Menu ............................................................................................................12

1.4 Operation Flow...............................................................................................................13

1.4.1 Import Drawing...................................................................................................13

1.4.2 Optimize Drawing ..............................................................................................14

1.4.3 Technique Setting ...............................................................................................14

1.4.4 Toolpath Planning ...............................................................................................15

1.4.5 Pre-Check ............................................................................................................15

1.4.6 Cutting Control ...................................................................................................16

2. CAD Operations ...................................................................................................................18

2.1 Features Display .............................................................................................................18

2.2 Selection .........................................................................................................................18

2.3 Geometric Transform .....................................................................................................20

2.3.1 Size Modification................................................................................................20

2.3.2 Dynamic Transform ............................................................................................21

2.3.3 Translate and Copy .............................................................................................22

2.4 Parameter Input ..............................................................................................................22

2.5 Snap ................................................................................................................................23

2.6 Draw................................................................................................................................23
 Friendess CypOne Laser Cutting Control Software 3

2.6.1 Standard Shape ...................................................................................................24

2.6.2 Text ......................................................................................................................24

2.7 Measure ..........................................................................................................................25

2.8 Optimize .........................................................................................................................25

2.8.1 Smooth Line ........................................................................................................25

2.8.2 Break Line ...........................................................................................................26

2.8.3 Delete Invisible ...................................................................................................26

2.8.4 Delete Duplicate .................................................................................................26

2.8.5 Join Line ..............................................................................................................26

2.8.6 Break Grid ...........................................................................................................27

2.9.1 Node Edit ............................................................................................................27

3. Technique Setting and Tools ................................................................................................29

3.1 Lead Line ........................................................................................................................29

3.1.1 Inner & Outer Contour .......................................................................................29

3.1.2 Auto Lead Line ...................................................................................................29

3.1.3 Manual Lead Line ...............................................................................................31

3.1.4 Check Lead Line .................................................................................................32

3.1.5 Over, Gap and Seal .............................................................................................32

3.2 Compensate ....................................................................................................................32

3.3 Micro Joint......................................................................................................................33

3.4 Fillet ................................................................................................................................34

3.5 Group ..............................................................................................................................35

3.5.1 Sort in Group.......................................................................................................36

3.5.2 Process of Group.................................................................................................36

3.6 Fly Cut ............................................................................................................................36

3.7 Co-edge ...........................................................................................................................39

3.7.2 Co-edge with Compensation ..............................................................................40

3.8 Bridge .............................................................................................................................40

 Friendess CypOne Laser Cutting Control Software 4

3.9 Array ...............................................................................................................................41

3.9.1 Rectangular Array ...............................................................................................41

3.9.2 Dynamic Array ....................................................................................................42

3.10 Batch Modify ...............................................................................................................43

3.11 LED Matrix ..................................................................................................................44

3.11.1 LED Matrix Filler .............................................................................................45

3.11.2 LED Matrix Tool...............................................................................................45

3.11.3 Divide ................................................................................................................46

3.11.4 Curve Measure ..................................................................................................47

3.12 Technique Parameter....................................................................................................47

3.12.1 Parameter Description ......................................................................................49

3.12.2 Laser Power/Frequency Regulation ................................................................51

3.12.3 DXF Layer Mapping ........................................................................................53

3.13.1 Nest ....................................................................................................................53

3.13.2 Sort and Tool Path ............................................................................................54

3.13.3 Sequence Preview .............................................................................................55

3.13.4 Manual Sort .......................................................................................................56

3.13.5 Group Sort .........................................................................................................57

4. Cutting Control .....................................................................................................................59

4.1 Coordinate System .........................................................................................................59

4.1.1 Mechanic Coordinate..........................................................................................60

4.1.2 Software Coordinate ...........................................................................................60

4.1.3 Find Part Zero after Exception...........................................................................61

4.2 Alarm ..............................................................................................................................61

4.3 Manual Test ....................................................................................................................62

4.4 Soft Limit Protection .....................................................................................................63

4.5 Frame ..............................................................................................................................64

4.6 Start and Dry Run ..........................................................................................................64

 Friendess CypOne Laser Cutting Control Software 5

4.7 Stop, Pause and Resume ................................................................................................65

4.8 Breakpoint ......................................................................................................................66

4.9 Start from Given Position ..............................................................................................66

4.10 Global Parameter .........................................................................................................67

5. CNC Assist Function ............................................................................................................70

5.1 Simulate Process ............................................................................................................70

5.2 Find Edge........................................................................................................................70

5.3 PLC Process ...................................................................................................................71

5.4 Return Origin..................................................................................................................71

5.5 Diagnosis Tools ..............................................................................................................71

5.6 BCS100 ...........................................................................................................................72

5.7 Error Measure .................................................................................................................72

6.1 Co-edge Example ...........................................................................................................73

6.2 Regional Output(Dust Collection) ................................................................................77

6.3 Motion Parameter Adjustment ......................................................................................78

6.3.1 Motion Parameter Specification ........................................................................78

6.3.2 Cutting Acceleration ...........................................................................................79

6.3.3 Traverse Acceleration .........................................................................................79

6.3.4 Low-Pass Filter ...................................................................................................80

6.3.5 Curve & Corner Precision ..................................................................................81

6.4 Shortcut Keys .................................................................................................................81

 Friendess CypOne Laser Cutting Control Software 6

1. Quick Start
1.1 Function Features

Support AI, DXF, PLT, Gerber, LXD file format, and standard G code created

by Master Cam, Type3, ARTCUT etc.

Optimize imported drawing automatically - delete duplicates, join lines,

delete invisible and unnecessary figures of specified size, identify inner and outer
contour and sort automatically etc., which all can be parametrically defined or
manually done.

LED matrix function is designed for advertising decoration with LED lights

that filling circles to part geometry in user defined pattern.

Divide function is to split large shape into small pieces fit for smaller
machine bed. Split parts will be grouped and marked which let it recognizable for

later picking up and putting together after cutting.

You can also measure curve length to estimate the material needed in later

process.

Support common operations to zoom, translate, flip, rotate, align and

duplicate object.

Support to add technique features including lead lines, kerf width

compensation, micro joint tags, bridge and gap in a what-you-see-is-what-you-get
style.

Automatically identify inner and outer contour, compensation direction and

check the lead line.

Support to break and join line segments, smooth lines, combine and explode
geometry etc.
 Friendess CypOne Laser Cutting Control Software 7

Quick nest parts geometries into plate via a few clicks.

Flexible sorting functions. User can group the geometries to lock the cutting

sequence.

Preview the cutting sequence statically or dynamically.

Quick set Fly Cut tool path.

Support flexible methods to execute piercing process, which allow users to

group piercing sequence, select piercing stages and customize process by setting
separate parameter group of laser, gas, delay and height etc.

Available to regulate laser power and pulse frequency in real time.

Allow user to save cutting technique of parameter group and reuse it to same

material.

Capable to memorize interrupted cutting and resume from given position. Allow user

to select part of the drawing for cutting.

Allow user to resume stopped/paused cutting from given position.

Powerful expansion capability with up to 30 PLC process and 50

1
programmable items.

Support to appoint and program input and output ports.

Support remote control via Ethernet by a wireless handle.

1.2 Access, Update and Install Software

You can contact your supplier to get software or download directly on Friendess

company website www.fscut.com.

1This function requires password and executed by trained professionals.

 Friendess CypOne Laser Cutting Control Software 8

Please confirm your computer environment meets the following requirements:

Win7 and later operating system.

CPU I3 and above.

4 GB memory at least.

VGA display above 15 inches, resolution 1280*1024 and above, 32-bit true
color.

2 USB ports at least.

If your operating system is based on Vista (including Windows Vista,

Windows 7, Windows 8, Windows 2008 Server), run as administrator to avoid
potential errors.

Make sure running environment meets the requirements then install the software.

Under Vista-based operating systems it's required to run as administrator.

To avoid program files modified during installation and ensure all drivers

installed properly, please close anti-virus software temporarily.

1.3 Start Operation

1.3.1 Desktop Shortcut

The shortcut icon will appear on desktop after installation complete.

Double click CypOne desktop icon to run the software.

The below image will prompt during startup then enter into CypOne main interface.
 Friendess CypOne Laser Cutting Control Software 9

1.3.2 User Interface

The black area in main screen is drawing board, the white box is machine-scaled
 Friendess CypOne Laser Cutting Control Software 10

working zone. The grid on drawing board and ruler will scale up and down when

zoom the view.

On the top are Title bar and Menu bar. You can find most commonly used
function buttons in menu bar, which are group-displayed in different tabs. There are

, Home, and CNC tabs in menu bar, click each tab switch the function display.

At very top on left is Quick Access Bar, where you can create, open or save the
file, and undo or redo the operation.

On Left Tool Bar listed basic drawing functions. The first five buttons are used to
switch different edit mode, including select, node edit, sequence edit, drag and zoom.
Click buttons of different shapes you can create geometry on drawing board. The last

3 buttons used to center align, explode geometry and fillet corner.

On Layer Tool Bar on the right displayed a Layer button and the other 17 layer
buttons of different color. Click Layer button will open 'Layer Parameter' window
where users can setup most of the cutting parameters. Click color button to appoint a
layer to selected part geometry, and this layer will by default used on next part

geometry drew on drawing board. The part geometry appointed by the first layer

will be shown in white color as a 'background layer' and not be processed in a cutting

task. The last two ‘First’ and ‘Last’ layers indicate that to process the part
geometry of ‘First’ layer at the very beginning and process the part geometry of ‘Last’

layer at very last.

At the bottom is the information status bar. In 'Draw' window displays all
messages of drawing operations. In 'System' window displays program messages apart
from drawing operations. Each message printed with time tag and marked with
different color so users can recognize these message as error, warning or notice etc. In
'Alarm' window displays all alarm messages in red color.
 Friendess CypOne Laser Cutting Control Software 11

The status bar at the very bottom will display message to different operation and
mode. The 'Fine Tune' at bottom right is to move object by direction button in a

precise distance. The rightmost shows control card model.

On the right side is Control Panel where users execute most commonly used
machining operations. From top to bottom are coordinate options, manual control
buttons, machining control buttons, process options and production counter.

1.3.3 Menu Bar

CypOne tool bar displayed in Ribbon style that groups options in different tabs to

facilitate user operations. The picture below will help you understand:

There are two tabs of Home and CNC, click each tab open the sub-menu. There

will be a third tab 'Working' when machine in a cutting process.

In each tab the options are arranged in different function column like 'View' and
'Transformation' etc. The buttons are large size for convenient operation. There might

be small buttons like under right corner of function column, click the button will
open a dialog box.

Click under function button will open a drop-down list of more options.
Click the button will execute the function immediately, click drop-down button will

open option list.

If you are Office 2007, Windows 7, or other ribbon-style programs user, you may
 Friendess CypOne Laser Cutting Control Software 12

already be familiar with this arrangement. Even you are first-time user will like the

operation style.

1.3.4 File Menu

At the top on menu bar is File menu with an icon button, click to open
the file menu which contained options about file operations.

The file opened recently will be listed in file menu where you can find your last
opened file easily.

You can save the file as lxds format by 'Save As'.

Click Import to add new drawing to drawing board and preserve the existing

drawing. Click Open to leave current workspace and open a new file.

You can setup options related with user habits in ‘User Settings’. Click 'Backup'
 Friendess CypOne Laser Cutting Control Software 13

will backup machine config, PLC and user config parameters into a compressed file.
Click 'BCS100 Monitor' will open BCS100 monitor interface. 'Diagnostic Tool' used

for monitor software state and troubleshoot.

Click 'About' at bottom corner will prompt a window showing detailed CypOne

software information.

1.4 Operation Flow

1.4.1 Import Drawing

Click on quick access bar will open the File dialog box, select the file

you need to open. The preview window on the right side of the File dialog will list the

files.
 Friendess CypOne Laser Cutting Control Software 14

You can also click create new workspace and draw a part in CypOne with

CAD tools.

1.4.2 Optimize Drawing

CypOne will automatically optimize the imported drawing - delete the duplicates
and invisible shapes, join lines, smooth lines, sort and explode groups etc. You can
also customize the optimize features in File > User Settings > User Configuration.

Normally, the geometry figures in drawing should be of closed contour.

Otherwise the software will highlight the open figures in red color. This function can

be turned off. You can check open figures in Home > View drop down menu by

and option. You can also select open figures by clicking Select > Select Open.

You can break lines by Home > Optimize > Break Line, then click on the line
where need to break. And join the lines by Optimize > Join Line.

1.4.3 Technique Setting

The functions under Home > Technique parameter column are the most

frequently used options in machining process. Click set lead lines, click

set the over-cut, gap or seal features. Click to add kerf

width compensation. Click add micro-joint tags which prevent parts

from falling off the plate skeleton or tip-up collision with laser head. Click

reverse the contour (cutting) direction. Click and point on

geometry to set start point. Or you can point outside the contour to create a lead line

to the part.

You can press Ctrl + A select all drawings, then click ' ' to set lead lines by user
 Friendess CypOne Laser Cutting Control Software 15

defined settings. Click Lead drop-down > Check Lead Line, program will check if

lead lines interfere with parts design and modify the lead line automatically.

Click button on layer tool bar to set the detailed cutting parameters. The
Layer Parameters dialog box contains almost all the parameters related to the cutting
performance.

1.4.4 Toolpath Planning

This process is to sort parts geometry and create cutting sequence. Click on
Home > Sort will sort all geometries automatically. Or you can select in Sort drop
down menu that fit your drawing layout. The software can identify the inner/outer

relation in sorting.

You can click on left toolbar to manually modify the sequence. Click one

geometry and click next will define the cutting sequence between these two

geometries.

You can click group the sorted geometries to lock the sequence inside the
group. The geometries inside this group won't be affected in other sorting process.

Right click the group open dialog box, select 'sort in group' to modify the
sequence inside the group.

1.4.5 Pre-Check

Users can check the tool path in several ways before start cutting on machine.
Slide the process bar to skim the sequence or click ' ' to check the sequence one by
one.
 Friendess CypOne Laser Cutting Control Software 16

Click button on control panel or in CNC tab will simulate

the tool path in software. Users can adjust simulation speed click and

in CNC tab.

1.4.6 Cutting Control

Please take notice that it requires machine with compatible control card to realize cutting

control.

Before start cutting you have to check relative position between drawing and

machine bed. Click on control panel you can see the relative position

between cutting zone and machine bed. This relative position is calculated by part

zero and laser head location. There are some symbols on the screen, click the

Zero reference mark will move to the laser head position.

 Friendess CypOne Laser Cutting Control Software 17

If the red cross mark does not match the real position of laser head, please check

the mechanic origin and correct the origin by CNC > Return Origin. If click

on control panel, the drawing crossed white box on screen, it indicates the cutting
zone will exceed machine bed.

If the red cross does not match the real position of laser head, please check the
mechanic origin and correct the origin by CNC > Return Origin. If click ' ' the
drawing crossed white box on screen, it indicates the cutting zone will exceed
machine bed.

Click in Home tab will change the part zero and relative position

between cutting zone and machine bed. For example, if laser head located at left
corner to workpiece, you should select Zero Ref at left bottom.

If drawing placement fit in white box, click in control panel,

machine will dry run along the border of the cutting zone. You can also click

machine will dry run along tool path.

Click start machining, Click pause the process and

you can manual control laser head up and down, open or close laser and gas etc. In

pause status users can click and to move laser forward or

backward along tool path. Click or resume

the machining process.

Click end the machining process. Laser head will return to the

pre-set position. If you didn't change drawing or start new cutting, click

can locate to interrupted position of last cutting process, click resume

cutting.
 Friendess CypOne Laser Cutting Control Software 18

2. CAD Operations
2.1 Features Display

In Home > View provides various options to display technique and geometry

features of drawing:

Click the option you can see feature tags applied on drawing immediately. The
option button in yellow indicates the option activated. If the option button not in

yellow color means function not enabled. For example, is enabled, graphic will

show the tool path with arrow symbol, close the arrow symbol disappear.

Click the drawing will display in center of white box.

Click small icon below View will open user configuration dialog box where

you can customize more detailed effect like snap and ruler etc.

Scroll the mouse to zoom the view. Click F3 will center drawing in white box,
click F4 will center the white box in drawing board. Or you can do same operations

by right click and open dialog box, select zoom > options.

2.2 Selection

CypOne provides various ways to select objects on drawing board. The basic
 Friendess CypOne Laser Cutting Control Software 19

operation is 'Click', click on drawing to select object. Another commonly used

operation is 'frame selection', drag the cursor on the screen will create a frame box to
select object. There are 2 patterns of frame selection: drag from left to right will create
a blue box, only when a whole part was framed in the box will be selected. Drag from
right to left will create a green box, as long as part of the geometry was framed in the

box, the whole object will be selected.

The 'frame selection' effect of these 2 patterns shown below. In left picture is
effect of drag from left to right that only BC will be selected, in right picture is effect
of drag from right to left that ABCD will all be selected. This selection method makes

it flexible to select object.

Press Shift when select object you can select or deselect new object without
changing existing selections.

Common operations: Select all (Ctrl + A), Invert selection, Copy (Ctrl + C), Paste
(Ctrl + V), Cut (Ctrl + X), Deselect, Copy with base point.

Geometric operations: Select open, select similar, select all outer/inner

contour, or select objects smaller than specified.

Layer operations: select a layer, lock background layer.

Click 'forbid fast drag-copy' will not allow user drag any shape in drawing

board or duplicate object by ctrl + left click operation.

'Select similar' is to select all objects of same shape and size with specified one.
For example, select a circle of 5mm radius, then click 'select similar' will select all

circles of 5mm radius on drawing board.

 Friendess CypOne Laser Cutting Control Software 20

2.3 Geometric Transform

In Home > Transformation column provides options to modify geometry. Select a function

option then select an object on drawing board to apply the effect like flip, rotate or align etc.

2.3.1 Size Modification

CypOne provides 7 options under ‘Scale’ drop down menu

to quick modify the geometry size. Pictured as right:

For example, '100mm' will scale the object with the size

of 100mm, '2 times' will enlarge the object 2 times larger.

Click Scale button will open dialog box to change

geometry in precise size, input new size and click OK.

If the lock icon in this state , the scale of length and width is coupled, if you
want to modify the length and width separately click the icon turns to this state

will unlock the linkage of two size input.

 Friendess CypOne Laser Cutting Control Software 21

‘Scale center’ specifies the relative position between new geometry and the
original one. For example, ‘Top left’ indicates the object in new size will locate at the

top left of the original one.

Notice: The lead line and kerf compensation will not change with new sized

geometry.

2.3.2 Dynamic Transform

In CypOne you can transform geometry by scale, rotate and flip. Select the
geometry on drawing board then click option button to finish the geometry transform.

For example, to rotate a rectangle 45°in the base line of left bottom, you can

follow the steps:

1) Select the object.

2) Click Home > Transform > Rotate, in bottom information bar will

prompt guide message ‘please specify basepoint: ’

3) Click left bottom of the object it will snap to key point:

4) Click again in bottom information bar will prompt guide message

‘input rotation angle: ’

5) Input 45 and click Enter will finish the operation.

If you want to rotate the rectangle and align with another object, then follow the
 Friendess CypOne Laser Cutting Control Software 22

below steps:

6) Click the right corner of rectangle will create a rotation base line.

7) In bottom window prompts 'specify end point of rotation: ‘Move

the base line snap to key point and click. As below:

Dynamic scale and flip operation much like the rotation, there will be no more

description here.

2.3.3 Translate and Copy

You can quick translate the geometry with direction button. Click

button at bottom bar into activate status and input a distance. Select

object and click direction button will translate the object in preset distance. It allows
you to move geometry in precise distance then return it back to original position.
Press Ctrl and direction key will duplicate selected geometry. For example, press Ctrl
and right direction button, will create a duplication at right side 100mm to selected

object.

2.4 Parameter Input

In some cases, it requires coordinate position in drawing geometry. CypOne

allows user to locate position by input a coordinate, for example, (100, 100) input as

100,100. Coordinates and parameters are shown in blue.

Most of the drawing operations allow both mouse operation and parameter input
 Friendess CypOne Laser Cutting Control Software 23

method. The following steps show you how to draw a rounded rectangle of length

300mm, width 200, with fillet radius 25mm.

1) Click select at left toolbar, meanwhile

bottom window will prompt 'Please specify start point'.

2) Input ‘0, 0’ press enter, then prompt' please specify cross point'.

3) Input '300,200' press enter, prompt' please specify radius'.

4) Input 50 press enter. All operations are completed. As shown

below.

2.5 Snap

CypOne will activate ‘snap to key point’ like grid or geometry border in some

operation.

You can turn off the snap function in > User Settings > User

Configuration > Drawing board, deselect option. The snap

precision can be set in same dialog box.

2.6 Draw

CypOne provides CAD tools on left tool bar, from top to bottom are: point, line,
polyline, circle, arc, rectangle, polygon and text. Drawing operations are similar with

CAD.
 Friendess CypOne Laser Cutting Control Software 24

2.6.1 Standard Shape

Drawing shapes of circle, rectangle and other is quiet simple. There will be no
more descriptions here. There are two special options in Circle menu: 'Replace circle
as point' and 'Replace by circle'. The former one can replace circle as point, the later

one can replace selected object as circle.

In Polygon menu provided rectangle, rounded rectangle, polygon and star shape.
To draw a rounded rectangle, you need to draw a rectangle then specify the round
corner radius. To draw a polygon or star shape, you have to specify the edge numbers
(from 3 to 100). Edge number also indicates star tips.

2.6.2 Text

Text can be transferred to curve in CypOne. Click on left tool bar then type
in text on target position.

On top menu bar will display Text tab and options where you can modify content, size and

style of text. As below:

The content and style of text cannot be changed once it's transferred to curve.
After you finish all design and settings of the text, transfer the text to curve as last
step.
 Friendess CypOne Laser Cutting Control Software 25

2.7 Measure

Measure tool is to measure the distance between two points.

Click in Home > Tools and point two points on drawing board, the

distance between points will display in bottom window.

2.8 Optimize

CypOne will optimize the imported drawing. You can also modify the drawing by

Home > Optimize options:

Select a part geometry and click optimize option then finish the operation by
prompted guider.

2.8.1 Smooth Line

Select a geometry and click 'Smooth Line' will open dialog box, input smooth

precision click OK will apply to selected object immediately.

The comparison between original and smoothed geometry shown below. The
 Friendess CypOne Laser Cutting Control Software 26

example here put a large value of precision to make comparison visible, user has to

input precision value as needed.

2.8.2 Break Line

‘Break Line’ is to break a closed geometry or open figure into segments. Click
'Break Line ' and point on geometry. Break function will keep functioning until switch

to other command or press ECS turn off the function.

2.8.3 Delete Invisible

There are unneeded geometries too small and invisible in a drawing that will
cause laser head located to a strange position in cutting. Click in Home > Optimize >
Delete Invisible, then define the size of the shapes to be deleted. The shapes smaller
than specified size will be deleted while others preserved.

2.8.4 Delete Duplicate

Lines of geometry lying together make it visually look like one line which cause
unnecessary and repeated cutting damage the workpiece. Click 'Delete Duplicate ' will
delete the duplicates by given tolerance.

2.8.5 Join Line

There are lines visually connected but not joined and hard to identify even zoom
close. Select geometries and click 'Join Line' can join all line segments within given

tolerance.
 Friendess CypOne Laser Cutting Control Software 27

In some cases you have to delete unnecessary lines then join line segments.

2.8.6 Break Grid

This function used to cut large in-part waste into small pieces falling down to
prevent tip-up collision. The cutting line shown in white color.

2.9 View

You can zoom and adjust view, edit drawing or modify sequence in this
module. Function entry is on the top of the left toolbar. From top to bottom is
select, node edit, manual sort, hand tool and zoom.

2.9.1 Node Edit

You can adjust the drawing precisely by node editing. Click then select
 Friendess CypOne Laser Cutting Control Software 28

geometry you can see nodes on drawing. Drag the node to adjust the drawing. Click

again will disable the function.

Nodes in blue and yellow both are editable.

 Friendess CypOne Laser Cutting Control Software 29

3. Technique Setting and Tools

The chapter describes the techniques in laser cutting. You have to set the cutting
technique fit your cutting condition considering that the actual cutting performance
directly related with material, laser and gas etc. All parameters should be considered

as reference not a guide value.

Improper or incorrect parameters may result in bad cutting performance even

damage the machine.

3.1 Lead Line

3.1.1 Inner & Outer Contour

CypOne can identify the inner and outer contour of part geometry automatically.
After modify the part geometry the inner/outer relations will change, click

in ‘Sort’ drop down menu will identify the inner/outer

relation of changed part geometries.

The principle to identify the inner/outer relations in CypOne works like this: the
outmost contour is outer contour and next to it is inner contour, open figure not
considered in. If you want to specify an outer contour within a part geometry, group
all shapes inside this contour and set sequence within this group.

Lead line introduce to part from outside outer contour, inside from inner contour.

Select a contour and click and to change contour relation.

3.1.2 Auto Lead Line

Select objects and click in Home tab open the dialog box like below:
 Friendess CypOne Laser Cutting Control Software 30

There are three styles of lead line including line, arc, arc + line, each style is
available to define the lead length and lead angle. It's also available to add small circle

on lead line.

The front end of arc style lead line is always tangent to part geometry. The lead
angle of arc is the angle between part geometry and the line connected two ends of arc.

Lead out line of arc style is similar with this principle.

 Friendess CypOne Laser Cutting Control Software 31

If you select lead position will change lead position and type of previous lead line.

You can select to preserve the lead position of

preset lead line.

3.1.3 Manual Lead Line

Click to manually change lead line. Click on part geometry will change

lead position while maintain the length and angle.

Or you can create a lead line by . Click and drag a line to part geometry will

create a lead line.

 Friendess CypOne Laser Cutting Control Software 32

3.1.4 Check Lead Line

Click ‘Check Lead Line’ under ‘Lead’ drop down menu software will check lead line

interference with part geometry and modify the length automatically. Click 'Identify

inner/outer contour' software will adjust lead line direction by identified contour
relation.

3.1.5 Over, Gap and Seal

There are four options under drop down menu . Select

part geometry and click option to add features. 'Gap/Over' setting only take effect to

selected objects, the previous setting of other object doesn't change.

3.2 Compensate

Select part geometry and click open dialog box.

Kerf width compensation accessed by measuring and comparing cutted part and
part design. The new path of compensation is white color and machine will follow the
compensated tool path. Origin contour of part geometry still preserved on drawing
 Friendess CypOne Laser Cutting Control Software 33

board for comparison.

The compensation is inside or outside (expand or shrink) part shape identified by inner/outer

contour relation, also user can select options.

You can select to round the corner of compensated tool path.

In the image, the white line is compensated tool path, yellow line vertical to compensated

path. The compensated corner is rounded. The rounded corner can guarantee smooth

cutting.

Click drop down list to edit and save commonly used

kerf width options.

You can choose if to compensate open shapes or preserve original toolpath.

Select objects you want to delete compensation then click will

delete the compensated path.

3.3 Micro Joint

Micro joint is a gap of small distance on part geometry, the gap won't be cut in process and

keep part attached to plate skeleton, which can avoid tip-up collision. The laser doesn't fire in
 Friendess CypOne Laser Cutting Control Software 34

the path of micro-joint. Micro joint featured as a gap on part geometry on drawing

board.

Click open dialog box set the length, click on part geometry will

apply micro joint feature, and you can apply this feature multiple times until press Esc
cancel the command. Micro joint can apply to compensated path.

Apart from add micro joint one by one on part geometry, you can apply

automatically by parameter setting. Click in drop down menu

open dialog box. There are two patterns of adding micro joint: by total number or by
interval. For example, you can choose to add 10 micro joints to each figure, or add

micro joint to part geometry every 100mm interval.

Click in drop down menu will break micro joint from tool path.

Exploded micro joint is editable and available to add lead line as individual figure.

To delete micro joint, select the objects and click in 'Clear ' drop

down menu. Or activate micro joint function press Shift button and click on micro
joint tag can also delete it.

3.4 Fillet

Click then point on part corner will round sharp corner by preset radius.

Select part geometries then click left tool bar can add fillet to all selected

objects.
 Friendess CypOne Laser Cutting Control Software 35

3.5 Group

If you 'Group' multiple geometries, the group will be identified as one object. The
sequence and layer inside group will be locked and won't be changed when you drag

or sort part.

Select the geometries and click can create a group. Select group and click

will explode group into individual shapes. Click in drop down

menu will explode all groups on drawing board.

Only explodes group into individual shapes, it will not break lines of closed

geometry. will explode shapes and lines into segments.

The shape contains all other shapes in a group will be identified as the outer

contour of a part.

Users have to group shapes by the logic of part geometry, which means only the
 Friendess CypOne Laser Cutting Control Software 36

shapes consist of a part should be grouped together. The terms 'group' and 'part' in

CypOne indicates same meaning most of time.

CypOne will group the common line geometries automatically for its integrity.
The geometries applied 'Bridge' also be grouped automatically.

3.5.1 Sort in Group

A group in sorting process is identified as one single object, the sequence of

shapes inside a group will not change.

If you want to modify sequence of shapes inside group without explode it, right

click group and select 'Sort in group'.

There might be group inside a group, 'sort in group' will not change the sequence
of shapes in sub-group inside a group. The sorting approach inside a group only
relates with geometric relations not to do with layer of shapes.

3.5.2 Process of Group

Group will be identified as an independent object, until a group finished cutting it

will not move on to the next part drawing. Piercing process to a group also follows the

same rule.

Please notice that the outer contour of part design should always cut at last, sort
the part design set proper sequence before cutting.

3.6 Fly Cut

For parts of regular shape arranged in array pattern, apply Fly Cut can profoundly
improve cutting efficiency. Fly Cut is a high-speed cutting technology. Laser head
performs the cutting without interruption at a continuous speed which makes it looks

like floating on sheet.

 Friendess CypOne Laser Cutting Control Software 37

Sort the part geometries then create fly cut path can optimize fly cut path.

Click in Home tab open dialog box. If selected geometries are circles,
dialog box would be 'Circular fly cut' otherwise it's 'Linear fly cut'.

Start position defines where to start fly cut. Joint interval is that when fly cut path
make a turn, when interval to next row of shapes smaller than this distance can be
connected. Allowed space is that when space between two objects longer than this
value won't create fly cut path between them.

When all geometries are circles, select 'circular fly cut' open dialog box setting
 Friendess CypOne Laser Cutting Control Software 38

parameters.

Allowed space means that when space between two circles larger than this it

won't create fly cut path.

Click 'Sort' software will sort part geometries first then create fly cut tool path.
Click 'Cut by part' the toolpath will follow the principle of finish cutting of a whole

part then start next.

 Friendess CypOne Laser Cutting Control Software 39

There is a parameter ‘FlyCut overcut’ in ‘Global Parameter’ window to add extra cutting at

the end of each part to make sure parts are fully cut off.

3.7 Co-edge

Merge the shared line of two parts as one will

reduce the total cutting length and improve efficiency.
In CypOne, the geometry borders between which
gaps smaller than 1 mm can merge as common line.
Drag a shape close to another one, it will snap to the
geometry border.

Select the objects and click to create

common line.

Curve shape cannot create common line in

CypOne.

The geometries merged common lines will be

integrated as a group. If the part design has in-part geometries, group the shapes
within this part then make common line, otherwise software cannot identify geometry
relations and sequence.

3.7.1 Auto Snap in Co-edge

When drag a part geometry close to

another in CypOne, it will snap to key points
or border in tolerance range. Snap can help to
place two geometries together in common line
application. Snap also works for multiple
 Friendess CypOne Laser Cutting Control Software 40

geometries drag together.

Once two geometries share the border, click will merge the shared edge as

common line. If you want to edit geometries applied common line, click

under ‘Group’ drop down list to explode common line geometry.

After modify the individual shapes then group them again.

3.7.2 Co-edge with Compensation

If you want apply kerf compensation to common line geometry, compensate

before co-edge the geometries. Co-edge won't change geometric shape in merging
common line. If the part geometry applied kerf width compensation, only
compensated path will be left on drawing board after co-edge.

For example, in above image, A is original design, P is compensated path to A, it's

P and B co-edged as common line. Even if move B close to A still cannot co-edge,
because A is not tool path anymore.

3.8 Bridge

Bridge usually applied to connect the parts with separate figures, usually used in
text character cutting. The part geometries connected by bridge also reduce the
piercing times. You can apply bridge on part design multiple times to connect separate

shapes.
 Friendess CypOne Laser Cutting Control Software 41

Click open dialog box, set the parameters and drag a line between shapes
you want to connect. Like below:

There are two options to define bridge- effective distance and bridge width. The
former one decides that only between lines of distance within this value can apply

bridge, the later one decides width of bridge.

Please take notice that separate geometries connected by bridge will have a

continuous cutting which can be affected by thermal distortion.

3.9 Array

This function can create duplications in a user defined array.

3.9.1 Rectangular Array

Click or under Array drop down menu will open the dialog

box:
 Friendess CypOne Laser Cutting Control Software 42

Set the row and column numbers and other options click OK will create

duplication in defined array.

3.9.2 Dynamic Array

Click open the dialog box, setup the interval of rows and columns,

then drag an area to create duplications. Like below:

 Friendess CypOne Laser Cutting Control Software 43

3.10 Batch Modify

You can apply changes of one geometry to similar geometries by batch modify to

improve efficiency, take an example:

Select a geometry and enter in batch modify window, set lead line, the changes

will apply to all similar geometries of same shape and size.

 Friendess CypOne Laser Cutting Control Software 44

3.11 LED Matrix

LED Matrix used to fill circles inside geometry by user defined style. Fabricators
in advertising industry need to cut circles on workpiece put LED lights. CypOne
 Friendess CypOne Laser Cutting Control Software 45

provides easy ways to design these circles on part geometry.

3.11.1 LED Matrix Filler

LED matrix filler can apply to all closed shapes. Select a shape and click in

Home tab open the following dialog box.

The radius defines circles size, margin means the gap between border and

outmost circles. There are 5 style options to create circles layout pattern.

3.11.2 LED Matrix Tool

LED Matrix Tool used to adjust layout of filled circles. Click in

LED Matrix drop down menu will open dialog box.

 Friendess CypOne Laser Cutting Control Software 46

Set the circles interval distance and margin then click , drag an area on

drawing will apply changes to circles inside selected area. Click then
drag an area on circles will delete the circles in this area (only apply to circles made

by LED Matrix). is to check the circles number and layout within a

selected area.

3.11.3 Divide

The advertising decoration can be larger than machine bed in size of meters,
fabricator has to divide whole drawing design into smaller shapes fit to cut in machine

then put cutted pieces together.

Click open dialog box. Mark is to add mark of number and letters at

divide end make it recognizable to pick up and put together cutted pieces. The mark

will be appointed as marking layer. Select will group the divided

shapes in case of messing up the design.

 Friendess CypOne Laser Cutting Control Software 47

3.11.4 Curve Measure

Click function button and define a curve segment by appoint start and end point.
The curve highlighted in yellow is to be measured, the length result will be shown in

bottom Draw window.

3.12 Technique Parameter

There are 16 layers in CypOne, users can set the cutting parameters to each layer
including cutting speed, laser power, gas pressure and nozzle height etc. The last two
 Friendess CypOne Laser Cutting Control Software 48

layers are 'First' and 'Last' which means to process at very first and at very last in

sequence.

Click in Home tab or aside control panel will open 'layer parameter'
dialog window contains all cutting parameters. The first tab 'Global parameter' listed
motion control parameter, laser burst parameter, default gas blow parameter and
follow actions parameter etc. In all layer tabs listed cutting and piercing parameter

groups, click and open each layer tab set parameter separately.

Notice: In 'Layer Parameter' dialog window will display different parameters by

laser and gas configuration. The parameter in demonstration image is only for

reference.
 Friendess CypOne Laser Cutting Control Software 49

3.12.1 Parameter Description

The following table gives a brief description to some of the layer parameters.

① Basic parameters

Cut speed The target/command cutting speed, while the actual

cutting speed is under this value considering the speed
change in corner turning, or in start and end phase in a tool

path segment.

Lift height After finish a tool path segment, laser head lifts and
locates to next start point of tool path segment. When pause
the cutting, laser head also lifts and holds to this height.

②Cutting parameters

Nozzle height The standoff distance between nozzle and plate surface

in cutting.

Gas type Gas type in cutting.

Gas pressure Gas pressure in cutting. Pressure regulation requires DA

gas valve signal given by CypOne.

Peak power The peak power decides the maximum power in cutting.
Take an example,3000W laser source, peak power set by

80%, the maximum power in cutting is 3000 * 80% =2400W.

Duty cycle The duty cycle of PWM laser modulation signal in

cutting. 3000W laser, peak power 80%, duty cycle 80%, the
average cutting power is 3000*80%*80%=1920W.

Pulse frequency The pulse frequency of PWM modulation signal, it

defines laser fire times in one second, higher frequency
 Friendess CypOne Laser Cutting Control Software 50

indicates more continuous laser wave.

Focus position The relative position between laser focus to nozzle tip.

Laser on delay The laser fires duration before start cutting to burn
through a small hole on material.

Step time The time spent that lower from pierce height to cut
height.

Laser off delay The delay to turn laser off to make sure cutting totally
finished.

Extra blow The extra gas blow after pierce finished and laser turns
off to cool down the material.

③ Other parameters

Not cut The parts drawing of this layer doesn't cut.

Not follow Laser head holding in fixed height in cutting, now to

follow a constant distance with plate surface.

Gas on Gas is open in the whole machining process.

Reduce lift This function has to work with another parameter 'Unlift
when travel shorter than' in global parameter. When finish a
toolpath segment, if the travel distance to next start point
shorter than this value, laser head doesn't lift and move
directly to next start point.

Pre-pierce Finish all pierces at start point then start cutting. There is
'auto group pre-pierce' option in global parameter dialog box.
Note: this option cannot work with defilm together

Defilm Execute defilm cutting along toolpath first, then start

 Friendess CypOne Laser Cutting Control Software 51

cutting. Enable this function will open a parameter window

for setting defilm parameters.

④Slow start

Lead length This used in cutting thick material, it will start cutting in

a slow speed to make sure plate cut through.

Lead speed The speed in this slow start length.

⑤ Power curve

Laser After you enable this function you can edit the

Power/Frequency power/frequency curve, and program will regulate the laser

Regulation power and frequency according the curve. This function is

very practicable improving corner precision. Notice:
Frequency regulation curve must be used with power
regulation curve.

3.12.2 Laser Power/Frequency Regulation

If enabled , CypOne will regulate laser frequency

and duty cycle in real time by speed change by preset curve scale. Click
to edit power/frequency regulation curve.
 Friendess CypOne Laser Cutting Control Software 52

In above image, horizontal axis is cut speed, vertical axis is laser power/pulse
frequency, and the unit is percentage %. You can click on curve to add nodes or copy
the power-speed scale curve to pulse frequency- speed scale. When cut speed reaches
to one point in horizontal axis of scale curve, laser power and pulse frequency will be
regulated in real time coincidence to the vertical axis of scale curve. Notice: Pulse
frequency curve must works with power curve, means you have to enable both scale
curve.

For example, laser power 500W, preset cut speed 100mm/s, peak power 90%, cut
power (duty cycle) 80%, when the real cut speed lower to 60% of target cut speed,

CypOne will regulate laser to:

500W X 90% X 80% X 60.00% = 216.0W

The power will not be lower than 10% of the laser power, for example 500W

laser will not lower than 500*10%=50W.

If not select , the cut power will remain same in

cutting process. In the above example, the power in the cutting process remains 500

W X 90% X 80% = 360W.

 Friendess CypOne Laser Cutting Control Software 53

3.12.3 DXF Layer Mapping

In drop down menu listed more options for layer operations. When there are

more than one layers in DXF drawing, click can appoint DXF layer
to CypOne layer of cutting technique. Like below image, DXF layer appointed to
CypOne layer for different technique.

3.13 Nesting

Nesting is to arrange parts geometries in plate with

highest utility with benefits of reducing waste and optimizing
tool path. CypOne simplify the process to allow nesting

complete by a few clicks.

3.13.1 Nest

Import part drawing and select the objects, click

open dialog box setup plate size, margin and part gap will
complete nesting.
 Friendess CypOne Laser Cutting Control Software 54

'Parts gap' is the minimum space between parts; 'Plate margin' is the empty space

left on plate border.

After nested parts, there will be a nesting list on left side where lists both drawing

design and nesting results.

CypOne supports up to 100 parts and 20 plate nesting.

3.13.2 Sort and Tool Path

In Home > Sort listed function buttons for sort and align parts geometries:
 Friendess CypOne Laser Cutting Control Software 55

Related content on sort please refer to 'Group' section. If no special sorting

requirements it's recommended just select 'Grid Pattern'.

3.13.3 Sequence Preview

Drag the progress bar or click you can preview the machining sequence of the

part geometries. Below picture shows the status of a part in previewing sequence:
 Friendess CypOne Laser Cutting Control Software 56

This process is interactive can be controlled freely, you can only check sequence

in selected area back and forth. Click under Home > View

will display overall tool path sequence.

3.13.4 Manual Sort

If you want to adjust parts sequence, select the objects then click from these four

buttons:

First Selected figure put as the first.

Last Selected figure put as the last.

 Friendess CypOne Laser Cutting Control Software 57

Forward Move selected figure forward one step in sequence.

Backward Move selected figure backward one step in sequence.

After finish sorting, you can click to check the sequence one by one.

You can also click on left tool bar enter 'manual sort mode' to set sequence

one by one. The sequence number tags on each figure and tool path will change
accordingly when you modify the sequence. Just click one figure then point next one
will define the sequence between them. If you point wrong object in sorting, click on
this wrong object again to cancel last command or right click > cancel. If you only
want to change sequence between two objects, click one then drag a line to the other.

As shown below.

3.13.5 Group Sort

If you want sequence of some objects fixed and not to be changed, select the
objects and 'Group' them. Other manual sort or auto sort process won't change the
sequence inside group. Until all figures inside a group completed laser will move to

next object outside the group.

 Friendess CypOne Laser Cutting Control Software 58

If you only want to change sequence of some of the objects not affecting others,
you can also do it by group the objects. Change the sequence inside group by right

click it and select 'Sort in group'.

 Friendess CypOne Laser Cutting Control Software 59

4. Cutting Control
CypOne integrates CAD and CAM in one, all CAD operations can finished on
your laptop in office as well as cutting technique setting, then send file to machine for
cutting.

4.1 Coordinate System

The 'modeling coordinate' in designing part geometry is not relevant to machine,

part zero marked by on drawing board. The coordinate relation in drawing and

machine bed illustrated below:

Click on control panel will display position relation between drawing

and white frame which indicates the cutting area relative to machine bed.
 Friendess CypOne Laser Cutting Control Software 60

4.1.1 Mechanic Coordinate

Mechanic coordinate is a unique existence decided by mechanism and machine

config. Coordinate created any time after return origin is consistent. If mechanic

coordinate deviated, click in CNC tab to reset coordinate.

The definition to coordinate in CypOne is same no matter what mechanism

structure is. In CypOne definition, laser head moves right to workpiece is X+
direction, laser head moves back towards workpiece is Y+ direction. Hence the
bottom right in workpiece located smallest coordinate value, the top right in

workpiece located biggest coordinate value.

4.1.2 Software Coordinate

Mechanic coordinate is fixed, CypOne adopts

software coordinate that facilitates the production.
The direction of CypOne software coordinate
same with mechanic coordinate, only zero point
different. Software coordinate contains float
coordinate and workpiece coordinate.

You can select coordinate on top of the

control panel, there listed 'float coordinate', nine 'workpiece coordinate' and one

'external coordinate'.

Float coordinate used in small quantity parts production, laser will start cutting
from where it stands. Execute 'Frame', 'Dry Run' or 'Start', part zero will be current
position of laser head.

User can appoint a zero point manually to each workpiece coordinate 1-9.
Workpiece coordinate applied in large quantity production, sheet material of standard
size will be placed same position on machine bed. Use workpiece coordinate can
 Friendess CypOne Laser Cutting Control Software 61

mark a fixed zero point that guarantee cutting starts from same position on sheet every

time.

Click at the very

bottom to select display mechanic or software
coordinate in CypOne, you can also specify zero
point here. Select 'coordinate locating' locate the

cutting head to the specified coordinate position.

4.1.3 Find Part Zero after Exception

Situation 1

If machining process stopped by the accident like gas or laser exception which

doesn't affect coordinate system, click can locate to part zero.

Situation 2

If accidents like power down or servo alarm stop the machining process and
deviate the coordinate system, must execute return origin reset coordinate then click

locate to part zero.

4.2 Alarm

CypOne monitors alarm signal and core components status, it will stop machining
once received alarm signal or detected alarm condition and display alarm message in
red color on top title bar. Most of the motion functions are disabled until alarm
released. Please check the machine by alarm message, make sure alarm condition
solved then start cutting. The alarm title shown as below:
 Friendess CypOne Laser Cutting Control Software 62

The 'Alarm' window at the bottom also displays the alarm message. After remove
the alarm source the alarm in title bar will disappear but alarm message in alarm
window all saved. Double click 'System' window can check all history records and
software events.

Besides alarm CypOne will detect other working condition and display warning,
notice and message in different color in 'system' window. These message won't stop

the machining but still suggest take notice of it and take precautions in advance.

The alarm can be released automatically or manually. The following are the

limitations to some alarms:

 Disable servo motor when emergency stop alarm activated

 Disable X/Y motion functions when BCS100 alarm detected (under

this status, Z axis condition unknown, there are collision risks if X/Y move)

 Disable XYZ motion function when emergency stop alarm activated

(in complete stop status)

 Z limit- alarm, disable dry run and jog.

4.3 Manual Test

The manual control buttons on control panel listed below:

 Friendess CypOne Laser Cutting Control Software 63

The button will turn to once activated. Press will turn on

laser, release button turn off laser. For other buttons, click the button activate the

function, click again close the function. For example, click open the gas,
click again close gas. For different laser model, there will be a delay click

till it turns to . This status accessed from laser source. Click

will open guide/pilot laser beam.

These buttons work with hardware on machine to function. If hardware damaged

or not properly set configuration in machine config tool, button doesn't function.

Click to mark the current position, click if you need

to locate to the mark position. User can set 6 markers select from .

4.4 Soft Limit Protection

CypOne can limit machine travel range by software limit, click

on control panel will enable the function.

When CypOne calculates the cutting zone of drawing will exceed travel range, it
 Friendess CypOne Laser Cutting Control Software 64

will prompt 'motion out of range' message and forbid sending motion command to

avoid collision. Check the part zero setting and adjust laser head position.

System will monitor the current position in real time and stop the motor function
once detected laser exceeded soft limit range.

Notice: soft limit protection relies on correct coordinates. Therefore, every time
after change the machine config or system abnormal shut down happens, must

execute return origin to reset coordinate.

4.5 Frame

Click laser head will run the outline of the cutting zone in a frame
box. It helps to identify if the cutting will exceed plate. Frame speed set in Layer
Parameter Window > Global Parameter > Frame Speed.

Notice: If execute 'Find Edge' process before frame, CypOne will offset
coordinate with the angle of plate, frame path also runs in a angled box rather than

square box.

4.6 Start and Dry Run

Click on control panel start cutting, the working status bar will
display on top monitoring coordinate, speed, time and follow distance etc.
 Friendess CypOne Laser Cutting Control Software 65

The working status bar cannot switch to others during a cutting task in case any
operations change the part drawing. If you need change parameter please pause the

cutting first then open layer parameter window modify the parameter.

Click machine will run the tool path not turning on laser and gas,
while the speed and path are same with actual cutting. In dry run you can also execute
pause, resume, forward, backward and even locate break point, all same with real

cutting process. Dry run used to fully check and simulate the whole cutting process.

You can choose to enable in Layer > global parameter

window.

By default laser will go to zero point after cutting

finished, if you want laser goes to other position after
cutting you can select in control

panel , options including part

zero, start position, end position, origin and marker. If

not selected, laser head will stand where the cutting finished

which equals to 'end position'. If you use 'float coordinate', it's recommended to

choose laser goes to 'zero point' after cutting.

After finish the cutting of one drawing, the counter on control panel will add up 1,
when reach the planned cutting times of one drawing will prompt message dialog box

to notice user. Click open dialog box setup the production schedule and

auto pause. For loop cutting task, click to finish setup.

4.7 Stop, Pause and Resume

Click or on control panel to stop a cutting task. Laser head

 Friendess CypOne Laser Cutting Control Software 66

will stand at where it stopped.

Click or on control panel to pause a cutting task. It's allowed

to change some of the cutting parameters in layer window, or you can execute manual
functions in control panel like burst laser and gas blow.

Click on control panel will resume the cutting from paused position.

Click will skip pierce process and cutting from paused

position directly.

Click or laser head will step forward or backward

along the tool path, the step distance set in on

control panel.

4.8 Breakpoint

When cutting process stopped or interrupted by accidents, as long as not changing

any cutting parameters, you can click locate to break point. Click

locate to break point and resume cutting.

If you change the cutting parameter of stopped/interrupted cutting process, the '

will change to which means resume from breakpoint is not

available.

4.9 Start from Given Position

CypOne allows user starts cutting from given position of drawing. Right click on

drawing, select 'start from here'. Shown in picture:

 Friendess CypOne Laser Cutting Control Software 67

For safety concern, select ' ', program will prompt dialog box asks users to
confirm operation again. Then laser head will locate to the specified position start
cutting.

If select ' locate here', laser head will locate and pause at given position.

You can execute 'locate here ' multiple times to confirm location is right. Or you

can adjust start position more precisely by and .

4.10 Global Parameter

The parameters setting in 'Global Parameter' window will affect the machine
running condition, workpiece cutting performance and efficiency.

① Motion control parameters

X,Y traverse speed Traverse speed is the rate at which machine positioning in

between cuts (different with cut speed0.

Traverse acceleration The maximum traverse acceleration in traverse

movements.

Frame speed Speed when laser head execute Frame function.

Cut acceleration The acceleration in cutting.

 Friendess CypOne Laser Cutting Control Software 68

LFP(Low-pass filter) The rate that cut acceleration changes with respect to time.

Default settings

Burst pulse frequency PWM pulse frequency when burst laser via CypOne control

panel.

Burst peak power The peak power when burst laser.

Manual gas blow The gas pressure when click Blow in CypOne panel.

Gas on delay Delay to gas on in default PLC process.

First gas on delay Extra delay added to gas on delay when start cutting and

execute gas blow the first time.

Switch gas delay The time required to make sure old gas totally discharged

and new gas comes in to channel when switch the gas.

Back when resume When resume the paused cutting, laser head will
move backward a distance then start cutting.

② Follow parameter

Max follow distance There is an effective capacitance sensing range,

which means follow distance in this range is accurate. If
follow distance larger than this value, laser will follow to

this limit distance first then lift up to target distance.

Frog-leap lift Laser head will lift up to given height then travel to next

when finish cutting of one tool path segment, this function can

optimize lift action to reduce the travel time needed.

Follow in dry run By default, laser head doesn't follow to plate in dry run.

Select this option if you need laser head follow to plate in dry
 Friendess CypOne Laser Cutting Control Software 69

run.

Disable follow In a standard cutting, laser head tip will follow to plate

surface and maintain a constant distance. If you need laser head

cutting in fixed height not follow to plate surface just select this

option.

Shelter alarm in pierce Shelter the capacitance alarm in piercing.

Hold at fixed height This option used in non-metal cutting, laser cutting
in a given height above plate surface rather than follow

and maintain a constant distance.

Unlift when travel When laser finished one segment tool path cutting, it lifts up

shorter than then travel to next tool path segment. If the travel distance

shorter than this value, it doesn't lift up and keeps follow to next

tool path segment.

Unit selection Select the unit system by user’s habits.

③Advanced

NURBS interpolation Select the option CypOne will optimize tool path
smoothness by nurbs fitting.

Compensate precision Precision of kerf width compensation.

Fly Cut overcut Add an extra distance to the end of the fly cut tool
path, make sure parts fully cut off in high speed cutting.

Auto group pre-pierce By default laser will execute piercing to grouped figures,

then to others. If no group in drawing, laser will finish

piercing of all figures then start cutting. Select this option,

laser will execute both piercing and cutting of one part

geometry then locate to next part.

 Friendess CypOne Laser Cutting Control Software 70

5. CNC Assist Function

5.1 Simulate Process

User can simulate whole cutting sequence in software after finish nesting and
sorting of part geometries. This operation doesn't require machine tool involved. By
simulating you can see part to part cutting sequence and in-part cutting sequence.

Click in control panel, it will switch to 'CNC' tab automatically,

you can adjust simulating speed in tool bar.

5.2 Find Edge

CypOne allows user manually locate plate edge by targeting 2 points on plate

border.
 Friendess CypOne Laser Cutting Control Software 71

Choose one side of plate, then locate laser head to P1 and P2 position save the
setting, software will calculate the plate placement angle and offset into coordinate
automatically.

5.3 PLC Process

Click in CNC tab open PLC editor, you can customize and execute PLC

process.

Notice: improper PLC settings will cause severe consequence!

5.4 Return Origin

Click in CNC tab will return motor axes to mechanic origin and reset
coordinate. Or return single axis return origin by options under ‘Return Origin’ drop

down menu by select and . When click will return

laser head (Z axis) first, then follows X and Y.

5.5 Diagnosis Tools

You can open Main I/O monitor in in File menu during a

cutting to check status of functioning parts involved.
 Friendess CypOne Laser Cutting Control Software 72

In left zone displays each motor axis number and pulse feedback from encoder.
User can send given pulse commands to single axis motor check if pulse equivalent
set right. Limit monitors if laser hits the limit sensor. PWM monitors laser status of

turning on/off. It also monitors active status of 6 input ports and 8 output ports.

5.6 BCS100

Click in File menu open the BCS100 control panel where you can
execute return origin, follow, locate and calibration etc.

5.7 Error Measure

Click laser will dry run along the tool path. CypOne will display motor
path in blue color with command path as comparison, by which you can adjust motor

and cutting parameters.

 Friendess CypOne Laser Cutting Control Software 73

6. Appendix
6.1 Co-edge Example

Below is the co-edge example. On right side is

original design of DXF file.

Open figure highlight in red color which also the lines to

merge as common line.

There are 6 bigger parts and 10 long strip parts down

below, and 9*2=18 short strip parts at right side.

First, separate these 3 parts from original design. As

below:

Select all shapes of one part then group them.

 Friendess CypOne Laser Cutting Control Software 74

Select this part then create a 3*2 size array.

Select 6 parts in array, click will merge as common line design.

Then drag part 2 close to part 1, it will snap to key point. As below:

Select part 2, create a 2*9 size array. Select all 18 part 2, drag from left to right
can avoid part 1.
 Friendess CypOne Laser Cutting Control Software 75

Click will merge all part 2 as common line. You have to take notice here

that cutting has to start from right to left, otherwise the plate in this area will deviate

or vibrate because lack of support from plate skeleton.

Right click part 2 select ‘Sort in group’ > ‘Right to left’.

 Friendess CypOne Laser Cutting Control Software 76

Next we will co-edge part 3.

Select part 3 create 10*1 size array.

Select all part 3 then click will merge as common line. As shown below.

Take notice that outline of common line part is thicker. You can see the border of three

common line design are thicker than lines of shapes inside.

When the cursor point on the part design it will show the message indicates it's a
group.

By same principle part 3 should be cut from top to bottom.

Drag part 3 close to bottom of part 1 then snap on border. As below:

 Friendess CypOne Laser Cutting Control Software 77

If you want to co-edge all par 1, part 2 and part 3, just select all and click .

If you don't need all parts co-edge then skip this step. You also need to drag

part1/2/3 away each other’s border.

Click space button will turn off snap function temporarily. Snap will function in

next operation.

6.2 Regional Output(Dust Collection)

In CypOne config tool > regional output where you can setup signal ports for dust

collector. Check you can setup rows and columns to divide regions

by your dust collector location. Drag the border line to adjust regions. Or you can
precisely input border coordinate. When machine located to one region in cutting,
output of this region will activate then dust collector works to extract polluted fumes.
 Friendess CypOne Laser Cutting Control Software 78

6.3 Motion Parameter Adjustment

6.3.1 Motion Parameter Specification

The motion parameters including speed, acceleration, low pass filter and
corner/curve precision are available to adjust parametrically. The parameter
description listed in below table:
 Friendess CypOne Laser Cutting Control Software 79

Parameter Description

X,Y traverse speed The maximum travel speed.

Traverse acceleration The maximum travel acceleration.

Cut acceleration Maximum cutting acceleration, which also decides acceleration

in corner cutting. You have to observe the torque curve in

servo tool to adjust this parameter.

LFP(Low-pass filter) Filter the noise to suppress machine vibration. Lower value

means stronger effect but it also lengthen the acceleration

time.

Curve precision The maximum curve precision of cutting control. The lower

the value is, more obvious in speed limit at curve cutting.

Corner precision The precision of corner precision in NURBS curve fitting. The

lower the value is, corner path will be sharper and speed
reduction more obvious.

6.3.2 Cutting Acceleration

Jog motor axis in high speed like 500mm/s.

Monitor the torque curve in servo tool when jog the axis, increase the work
acceleration if peak torque under 80% or reduce cut acceleration if peak torque larger

than 80%.

Adjust the acceleration until peak torque reaches to 80%. The acceleration lead
screw structure can bear is usually no more than 0.5G. And no more than 2G for rack
gear structure.

6.3.3 Traverse Acceleration

You can put this value calculated by Servo Tools. Or larger than cut acceleration
 Friendess CypOne Laser Cutting Control Software 80

by 1.5~2 times. The peak torque of servo motor in dry run cannot exceed 150%,
within this range the mechanism can stand the impact, distortion and noise. The
acceleration lead screw structure can bear usually no more than 0.5G. And no more
than 2G for rack gear structure.

6.3.4 Low-Pass Filter

Adjust low pass filter by cutting a workpiece sample. Lower laser power burns
marking on workpiece. Observe and measure the accuracy of the marking path.
Marking path can be shapes of circle, star, polygon and square of different size. As
shown in the following figure:

Lower the low pass filter as much as possible within desirable cutting precision.
The indication is no waving at corner cutting. You can directly setup the parameter by
the below table. Or you can adjust and determine the cut acceleration, then adjust low
pass frequency around 2 levels around it. Cut acceleration must match with low pass

filter, one of them cannot be impressively large than the other.

Level 1
1 2 3 4 5 6 7 8 9
10

Cut
0.1 0.2 0.3 0.4 0.5 0.6 0.8 1 1.5 2
Acceleration
 Friendess CypOne Laser Cutting Control Software 81

(G)

Low pass filter 8

3 3.5 4 5 5.5 6 6 6 7
(HZ) 8

6.3.5 Curve & Corner Precision

Only under special circumstances to adjust the parameters in a small extent

around the default value, otherwise not recommend to modify these two parameters.

If the curve precision of cutting not good, you can lower the curve precision
which will limit the cutting speed at curve path. If the corner precision of cutting is
not good, lower the corner precision will limit the cutting speed at sharp corner. The

value set too large the sharp corner will turn to a round corner.

6.4 Shortcut Keys

The table lists the shortcut keys in CypOne for some common operations.

Shortcut Keys Effect Using conditions

Ctrl + A Select all None

Ctrl + C Copy objects to clipboard Select the objects

Ctrl + Shift + C Copy with basepoint Select the objects

Ctrl + O Open file None

Ctrl + V Paste copied objects to drawing board Copied objects

Ctrl + X Cut objects to clipboard Select the objects

Ctrl + Y Redo the command just revoked There are revoked commands

Ctrl + Z Revoke the command just completed There are completed

 Friendess CypOne Laser Cutting Control Software 82

commands

F2 Open layer cutting parameter None

setup window

F3 Display all drawing in the center None

screen

F4 Display all drawing in the center None

white box

F7 Display/hide tool path None

F8 Display/hide position path None

DEL (delete) Delete selected drawing Select the objects

SPACE Repeat previous command The command is repeatable