Scribd Logo
Upload

Welcome to Scribd!

  • 750 views

    Scrap Material Handling & Loading Jha - 1

    Uploaded by

    Dwitikrushna Rout
    The document provides a job hazard analysis for handling rejected scrap materials at a mechanical department location in Kalinganagar. It identifies two basic job descriptions - 1) segregation of cut scrap and 2) loading of scrap material in trucks. For each job, potential hazards are outlined like sharp edges, heavy loads, and improper lifting. Safeguards and controls are specified such as following lifting capacity limits, using proper PPE, maintaining good housekeeping, and providing worker training and supervision. Responsibilities for implementing the controls are assigned to supervisors, safety officers, and experienced staff.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Scrap Material Handling & Loading Jha - 1

    Uploaded by

    Dwitikrushna Rout
    750 views2 pages
    The document provides a job hazard analysis for handling rejected scrap materials at a mechanical department location in Kalinganagar. It identifies two basic job descriptions - 1) segregation of cut scrap and 2) loading of scrap material in trucks. For each job, potential hazards are outlined like sharp edges, heavy loads, and improper lifting. Safeguards and controls are specified such as following lifting capacity limits, using proper PPE, maintaining good housekeeping, and providing worker training and supervision. Responsibilities for implementing the controls are assigned to supervisors, safety officers, and experienced staff.

    Original Title

    SCRAP MATERIAL HANDLING & LOADING JHA -1-

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a job hazard analysis for handling rejected scrap materials at a mechanical department location in Kalinganagar. It identifies two basic job descriptions - 1) segregation of cut scrap and 2) loading of scrap material in trucks. For each job, potential hazards are outlined like sharp edges, heavy loads, and improper lifting. Safeguards and controls are specified such as following lifting capacity limits, using proper PPE, maintaining good housekeeping, and providing worker training and supervision. Responsibilities for implementing the controls are assigned to supervisors, safety officers, and experienced staff.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    750 views2 pages

    Scrap Material Handling & Loading Jha - 1

    Uploaded by

    Dwitikrushna Rout
    The document provides a job hazard analysis for handling rejected scrap materials at a mechanical department location in Kalinganagar. It identifies two basic job descriptions - 1) segregation of cut scrap and 2) loading of scrap material in trucks. For each job, potential hazards are outlined like sharp edges, heavy loads, and improper lifting. Safeguards and controls are specified such as following lifting capacity limits, using proper PPE, maintaining good housekeeping, and providing worker training and supervision. Responsibilities for implementing the controls are assigned to supervisors, safety officers, and experienced staff.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    JOB HAZARD ANALYSIS

    Dept./Section Mechanical JHA No.: 01

    Location of Job Kalinganagar Date:-25.06.2020

    Job Description Handling Of Rejected Scrap Materials Doc.: STPL/JHA/03/00


    Team Who has done JHA Safety Supervisor Revision=00
    Basic job description Potential Hazards Safe Guards / Controls to be put in place Responsibility

    1. Segregation of cut scrap Safety: 1. 25 kg for men & 16 kg for women


    1) Heavy load are the maximum lifting capacity Site Supervisor
    to be strictly followed. Safety
    2) Sharp edges of load Supervisor
    2. Safety gloves to be worn while
    3) Bad housekeeping handling.
    3. Good housekeeping is to be
    Environment: maintained on worksite.
    NA 4. Proper supervision for wrong
    Quality: procedural working.
    NA 5. Small intervals to be provided
    Ergonomic:
    between work.
    1.Improper working
    6. Shelter & rain coat to be provided
    posture.
    to workers.
    2.Continuation Of
    7. Sand & broken bricks to be laid on
    work.
    Seasonal: swampy ground.
    1.Heavy downpour. 8. Drinking water facility & shed to
    2.Lightening be provided on work place.
    3.Swampy area. 9. ORS should be present
    4.High Temperature compulsory in first aid box.
    5.Loo 10. Adequate PPEs usage.
    Occupational 11. Periodic medical check up
    Health Hazard:
    1.Musculoskeletal
    disorder

    Required PPE Required Required Training Experienced site in-


    Tools/Equipments charge
    Safety Hand gloves, Safety Training before start of job Available
    Goggles, Safety Helmet, Training about the following SOP
    Safety Shoes, Ear plug. Nose
    Mask, Fluorescent Jacket

    Signature of JHA Team Members


    JOB HAZARD ANALYSIS

    Dept./Section Mechanical JHA No.: 01

    Location of Job Kalinganagar

    Job Description Handling Of Rejected Scrap Materials


    Team Who has done Safety Supervisor
    JHA
    Basic job Potential Hazards Safe Guards / Controls to be put in place Responsibility
    description

    2. Loading Of scrap Safety :- 1. Strict supervision & Competent person with


    material in truck. 1. Horseplay during adequate experience. Supervisor
    loading of scrap 2. Good housekeeping at work site. Site Safety
    materials. Supervisor
    3. Adequate PPE usage(in this case Safety hand
    2. Slippery Surface
    3. Sharp edges of gloves, Safety Shoe, Safety Helmet, Fluorescent
    scrap materials. Jacket, Safety Goggles ) along with sack cut-
    4. Rolling down of piece wrapped along sharp edges.
    Truck 4. Scotch blocks to be used along with hand
    5. Other moving brake in stand by position. Driver should be
    vehicles and inside the cabin while loading.
    equipment.
    5. Barricade the area & proper signage.
    6. Lifting Equipment.
    Environment :- 6. Wire and D-shackles to be checked thoroughly
    NA before start of work. Ladder or hand rail
    Quality :- should be used while climbing trailer and
    NA descending.
    Ergonomic: 7. Proper supervision at work site.
    1.Improper working 8. Timely gap to be provided to workers during
    procedure.
    working hours.
    2. Continuous work.
    Seasonal: 9. Shed with drinking water facility.
    1.Surrounding 10. Rain coat & shelter beside work site.
    temperature 11. Periodic medical check up
    2. Heavy downpour.
    Occupational
    Health Hazard:
    1.Musculoskeletal
    disorder

    Required PPE Required Required Training Experienced site


    Tools/Equipments in-charge
    Safety Hand gloves, Truck, Trailer Training before start of job Available
    Safety Goggles, Safety Training about the following SOP
    Helmet, Safety Shoes,
    Ear plug. Nose Mask,
    Fluorescent jacket

    Signature of JHA Team Members

    You might also like