Scribd
Upload
480 views1 page

WPS 01 WQT PDF

This welding procedure specification is for single V-groove welds in 6G position using SMAW with E6010/E7018 electrodes on ASTM A53 Grade B steel between 1.5-14.22mm thick. The welding will be done uphill with a string or weave bead between 60-140 amps and 17-34 volts using a 2.5mm electrode. The joint will be cleaned between passes by chipping, grinding and wire brushing.

Uploaded by

kiki270977
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
480 views1 page

WPS 01 WQT PDF

This welding procedure specification is for single V-groove welds in 6G position using SMAW with E6010/E7018 electrodes on ASTM A53 Grade B steel between 1.5-14.22mm thick. The welding will be done uphill with a string or weave bead between 60-140 amps and 17-34 volts using a 2.5mm electrode. The joint will be cleaned between passes by chipping, grinding and wire brushing.

Uploaded by

kiki270977
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Date:

WELDING PROCEDURE SPECIFICATION Page: 1of 2


ASME SEC IX Ed. 2004

Welding Procedure Specs No.: WPS-01-WQT, W-P-SS-001


Welding Process : SMAW
Type : Manual

JOINTS (QW-402)
30 º± 5º
Joint Design : Single "V" Groove
Backing (Yes/No.) : No
Welding Position : 6G
Welding Progression: Uphill 7.11 mm 1.5 mm to 2.0 mm

2.5 mm

BASE METAL (QW-403) GAS (QW-408)

P No.: 1 Group No.: 1 TO P No.: 1 Group No.: 1 Shielding Gas : N/A


Specs. Type & Grade : ASTM A53 GR. B Percent Composition (Mixture) : N/A
Thickness of Test Plate: 7.11 mm , Dia. : 6 "
Thickness Range : Groove- 1.5 mm to 14.22 mm max.
Diameter range : 2 7/8 to unlimited
FILLER METAL (QW-404) ELECTRICAL CHARACTERISTICS (QW-409)

F No.: 3/4 A No.: 1 Current AC or DC : DC


Spec. No. (SFA) : 5.1 Polarity : DCEN (Root); DCEP (Fill, Cap)
AWS No. (Class No.): E6010/E7018 Amps. Range : 60 - 140
Size of Electrode : 2.5 mm/2.5-3.2 mm Volts Range : 17 - 34
Tungsten Electrode Size and Type: N/A
POSITIONS (QW-405) Electrode Wire Speed & Range : N/A
Posittion of Groove: 6G
Welding Progression: Uphill
Position of Fillet : N/A TECHNIC (QW-410)
String or Weave Bead : String or Weave
PREHEAT (QW-406) (Max. 3 X Electrode Dia.)
Preheat Temperature Min.: 27 deg. C ( Remove Moisture) Initial & Interpass Cleaning: Chipping, Grinding &
Preheat Temperature Max.: 250 Deg. C Wire brushing
Preheat Maintenance : N/A Method of Back Gouging: N/A
Oscillation : N/A
POST WELD HEAT TREATMENT (QW-407) Multiple or Single Pass (per side): Multiple
Temperature Range: N/A Multiple or Single Electrode : Single
Time Range : N/A Travel Speed Range : 1.33 mm/ sec.- 1.83 mm/sec.

You might also like