Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    RI-WI-ENG-23 Mechanical Seal

    Uploaded by

    QC Regian
    This document provides work instructions for replacing a mechanical seal in a pump. It outlines 4 key steps: 1) Remove the coupling and impeller. 2) Remove the casing cover and old mechanical seal. 3) Carefully insert the new mechanical seal on the shaft. 4) Reassemble the pump by replacing the impeller and casing, and reconnecting the motor. The purpose of the mechanical seal is to prevent fluid leakage from inside the pump. It is commonly used in centrifugal, gear, and screw pumps as well as mixers and compressors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RI-WI-ENG-23 Mechanical Seal

    Uploaded by

    QC Regian
    40 views1 page
    This document provides work instructions for replacing a mechanical seal in a pump. It outlines 4 key steps: 1) Remove the coupling and impeller. 2) Remove the casing cover and old mechanical seal. 3) Carefully insert the new mechanical seal on the shaft. 4) Reassemble the pump by replacing the impeller and casing, and reconnecting the motor. The purpose of the mechanical seal is to prevent fluid leakage from inside the pump. It is commonly used in centrifugal, gear, and screw pumps as well as mixers and compressors.

    Original Title

    RI-WI-ENG-23 Mechanical seal

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides work instructions for replacing a mechanical seal in a pump. It outlines 4 key steps: 1) Remove the coupling and impeller. 2) Remove the casing cover and old mechanical seal. 3) Carefully insert the new mechanical seal on the shaft. 4) Reassemble the pump by replacing the impeller and casing, and reconnecting the motor. The purpose of the mechanical seal is to prevent fluid leakage from inside the pump. It is commonly used in centrifugal, gear, and screw pumps as well as mixers and compressors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views1 page

    RI-WI-ENG-23 Mechanical Seal

    Uploaded by

    QC Regian
    This document provides work instructions for replacing a mechanical seal in a pump. It outlines 4 key steps: 1) Remove the coupling and impeller. 2) Remove the casing cover and old mechanical seal. 3) Carefully insert the new mechanical seal on the shaft. 4) Reassemble the pump by replacing the impeller and casing, and reconnecting the motor. The purpose of the mechanical seal is to prevent fluid leakage from inside the pump. It is commonly used in centrifugal, gear, and screw pumps as well as mixers and compressors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    WORK INSTRUCTION Prepared by Review by Approved by

    MECHANICAL SEAL
    PT. Regian Indonesia Eng Mgr MR Director
    Document No. RI-WI-ENG-23 Issue date 23 April 2018
    Revise No. 00 Page Page 1 of 1

    1. PURPOSE
    The main function mechanical seal in a pump is to prevent leakage of liquid from
    inside the pump to the outside (atmospheric side).
    2. SCOPE
    This procedure is used as a guide in carrying out the process to prevent fluid
    leakage from a space / container that has a rotating shaft. Shifting occurs because
    the mechanical device has 2 end face components (end faces) at a position of 90 °
    to the axis of the shaft which is always in contact with one another because of the
    force axial from the spring /spring. Mechanical seal generally installed in various
    types of pumps such as centrifugal pump, gear pump, screw pump. Also can be
    attached to equipmentmixer / agitator and centrifugal / screwcompressor.
    3. RESPONSIBILITIES
    QC, Workshop Staff (operator), Supervisor

    4. WORK SEQUENCE
    1. Remove all coupling fixing bolts and remove the coupling spacer from its
    compartment. Then, remove the casing set bolts. The revolving part can be
    removed without separating the casing and pipe flange.
    2. Remove the impeller nut.
    3. Remove the impeller with a special tool / tracker.
    4. Remove the casing cover after loosening the gland / gland plate nuts.
    5. Remove the mechanical seal.
     Loosen and remove the setscrew on the mechanical seal with an allen key.
     Remove the mechanical seal from the shaft (sleeve), be careful not to
    damage the V-ring and the O-ring.
    6. Mechanical seal installation.
     Replace the damaged mechanical seal with a new one. Insert it on the
    shaft (sleeve) carefully.
     Put the cover back into the stuffing box so that the threads break through
    the gland plate. Install a nut on the thread - then tighten it.
     Fasten the setscrew.
     Replace the impeller then tighten the nut with a key ring.
     Put the stuffing box back on the pump shell. Replace the casing bolts set
    and tighten.
     Reconnect the stuffing box and motor with spacers. Perform rim & face
    alignment with the dial gauge to obtain minimal alignment of the clutch
    face and concentric according to manufacturer's instructions.

    You might also like