Scribd
Upload
906 views1 page

Make Up Torque

This document provides make up torque specifications for Weatherford 2-3/8" and 3" orienter tools. It lists the component, thread specification, and recommended make up torque in foot-pounds for the output sub, clutch sleeve, valve stem bypass, valve stem, torque housing, drive rod, top sub, and torque housing/lower assembly of each tool. It notes that the thread specifications use Stub Acme (SA) and Tomahawk proprietary (TOM) thread forms.

Uploaded by

Alexander Klm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
906 views1 page

Make Up Torque

This document provides make up torque specifications for Weatherford 2-3/8" and 3" orienter tools. It lists the component, thread specification, and recommended make up torque in foot-pounds for the output sub, clutch sleeve, valve stem bypass, valve stem, torque housing, drive rod, top sub, and torque housing/lower assembly of each tool. It notes that the thread specifications use Stub Acme (SA) and Tomahawk proprietary (TOM) thread forms.

Uploaded by

Alexander Klm
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Make Up

Torques

Make Up Torque & Thread Specifications


Weatherford 2-3/8” Orienter
Component Thread Specification Make Up Torque
Output Sub, Internal 1.563"-10 SA 700 ft/lbs.
Clutch Sleeve 0.875"-28 UN 40-50 ft/lbs.
Valve Stem Bypass 1.720”-12 SA 325 ft/lbs.
Valve Stem 0.875"-14 UN 225 ft/lbs.
Torque Housing/Pressure Housing 2.375" TOM 900 ft/lbs.
Drive Rod 1.108”-20 UN 120 ft/lbs.
Top Sub, internal 2.375" TOM 900 ft/lbs.
Torque Housing/Lower Assembly 2.375" TOM 900 ft/lbs.

Make Up Torque & Thread Specifications


Weatherford 3” Orienter
Component Thread Specification Make Up Torque
Output Sub, Internal 2.063"-8 SA 800 ft/lbs.
Clutch Sleeve 1.125"-28 UN 45-55 ft/lbs.
Valve Stem Bypass 2.063”-12 SA 400 ft/lbs.
Valve Stem 1.125"-12 UN 200 ft/lbs.
Torque Housing/Pressure Housing 3.000" TOM 1,400 ft/lbs.
Drive Rod 0.438”-20 UNR 100 ft/lbs.
Top Sub, internal 3.000" TOM 1,400 ft/lbs.
Torque Housing/Lower Assembly 3.000" TOM 1,400 ft/lbs.

Note:
SA = Stub Acme, Class 2G
TOM = Tomahawk proprietary

You might also like