Org Structure:

Definition

PLANT

Enterprise Structure ->Definition ->Logistics – General ->Define, copy, delete, check plant

Copy from standard plant like 1000. In this we use AGPL

Define Plant – to maintain address and other details

Note: Please make sure that country and plant specific codes are available in both the system ECC
and EWM

STORAGE LOCATION

Enterprise Structure ->Definition ->Materials Management ->Maintain storage location

Maintain minimum 2 Storage location for EWM (one to maintain incoming stock, another is for
outgoing stock. And for excisable also you can create one more depends on the business
requirement and physical arrangements with in the storage area) since it links with availability
group

SHIPPING POINT

Enterprise Structure ->Definition ->Logistics Execution ->Define, copy, delete, check shipping point

Copy from standard shipping point like 1000. Here we use AGPS

Note: Please create the shipping point code which not same as plant code while practicing.

WAREHOUSE NUMBER

Enterprise Structure ->Definition ->Logistics Execution ->Define, copy, delete, check warehouse
number

Note: Don’t copy the existing centralized WH. Only define 3digit warehouse number with
description.

And don’t maintain any other centralized warehouse related org structure like storage type, section
etc. This is called as Link warehouse to EWM warehouse.

Assignments:

Assign Plant to Company code

Enterprise Structure ->Assignment ->Logistics – General ->Assign plant to company code

Assign Plant to Purchase Organization

Enterprise Structure ->Assignment -> Materials Management ->Assign purchasing organization to

plant

Assign Warehouse number to Storage location

Enterprise Structure ->Assignment ->Logistics Execution ->Assign warehouse number to

plant/storage location

1
Assign all our Storage locations. This is warehouse number, Plant and storage location combination.

Assign shipping point to Plant

Enterprise Structure ->Assignment ->Logistics Execution ->Assign shipping point to plant

Please assign the Shipping point @ below node and the come here to remove unwanted shipping
points which all are copied while copying the plant and shipping point.

Determination:

Shipping point determination

SPRO ->Logistics Execution ->Shipping ->Basic Shipping Functions ->Shipping Point and Goods
Receiving Point Determination ->Assign Shipping Points

This is the combination of Shipping condition, Loading Group , plant and shipping point.

You can use without SC and LG , With SC and LG.( two strategies)

SPRO ->Logistics Execution ->Shipping ->Basic Shipping Functions ->Shipping Point and Goods
Receiving Point Determination ->Assign Goods Receiving Points for Inbound Deliveries

This is the combination of Plant, Storage location and Shipping point.( Since this is for Inbound
delivery, we can use the Storage location which is defined for incoming goods). No need to maintain
sequence number for our practice.

Here also remove unwanted entries which is copied.

SPRO ->Logistics Execution ->Shipping ->Basic Shipping Functions ->Shipping Point and Goods
Receiving Point Determination ->Set Up Storage-Location-Dependent Shipping Point Determination
->Assign Shipping Points According to Storage Location

SPRO ->Logistics Execution ->Shipping ->Basic Shipping Functions ->Shipping Point and Goods
Receiving Point Determination ->Set Up Storage-Location-Dependent Shipping Point Determination
->Assign Shipping Points According to Storage Location

This is combination of Shipping condition, Loading group, Plant , Storage location and Proposed
shipping point.

Here also, You can use without SC and LG , With SC and LG.( two strategies)

DELIVERY SPLIT PER WAREHOUSE:

SPRO ->Logistics Execution ->Shipping ->Deliveries ->Define Split Criteria for Deliveries ->Delivery
Split by Warehouse Number ->Determine delivery split per warehouse number

Should activate for our 3digit “link warehouse”

INTEGRATION WITH OTHER SAP COMPONENTS:

2
Integration with Other SAP Components ->Extended Warehouse Management ->Basic Settings for
EWM Linkage ->Configure SAP EWM-Specific Parameters

Reference to External Warehouse Management – maintain as ERP with EWM

Communication with warehouse systems – maintain as Queued and Asynchronous RFC

Distribution mode for the delivery – maintain as Distribution immediately at document creation

Serial Number Decentralized WM – Allow – activate this check box

Integration with Other SAP Components ->Extended Warehouse Management ->Assign

Warehouse Number to Warehouse Number of Decentralized SCM System

Maintain four digits Decentralized 4 digit SCM WM against our Linkage three digit warehouse
number.

DISTRIBUTION OF ORGANIZATION STRUCTURE AND MASTER DATA FROM ECC to SCM-EWM

SYSTEM

This will be done by CIF (Core Interface).

This is Uni directional only. That is from ECC to SCM – EWM only

T-Code:

CFM1 – Create Integration Model and Generate Integration Model

CFM2 – Activate Or De activate Integration Model

In this transaction Model Name and APO Application is Free text. You can maintain any meaningful
text.

Logical system should be logical system of SCM- EWM client.

We use this CIF integration model for Plant, Shipping Point, Material Master, Vendor master and
Customer master to transport into SCM-EWM system.

While running CFM2, If you get any error popup message, and if it is not relevant to you, just ignore
it.

Once It is completed, You can check the plant code and shipping point and master data in SCM EWM
system.

EWM SET UP

Highest level of org is Warehouse number

Define Warehouse Number

Define

Copy from standard 0001

3
 Activate BC Sets ( Business Configuration Objects) T-Code – SCPR20(Hw to do it is available
in session 7 – 11:00 min)

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->Define

Warehouse Numbers

We can copy from standard Warehouse 0001 for our practice.

To do this, please go to the below Path

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->Cross-

Process Settings ->Copy Warehouse Number Customizing

Source – 0001 Destination: Your own 4-digit EWM number. This is what you maintained in ECC as
SCM-EWM

After copied, please change the new EWM with your own Name in SPRO ->SCM Extended
Warehouse Management ->Extended Warehouse Management ->Define Warehouse Numbers

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->Master

Data ->Define Warehouse Number Control

Define Number Control

Weight unit

Time

Volume

Unit of Length – to trace the distance from one area to another area.

Currency –Physical inventory – to make qty adjustments with value tolerance.

Factory Calendar – Purpose is same as ECC. But we can have different holiday/working days than
Plant To maintain holidays and working days

External Systems:

Link to sub system

Like Digital Scale, Shipping companies like DHL, FedEx etc., they will get the details of volume/weight
etc. from EWM

Default Printer

Travel distance calculation:

Here we can define whether we are going for Euclidean method or Manhattan method.

If you are not checked Euclidean method system will take by default as Manhattan Method.

---

Party Entitled to Dispose:

4
To identify the product based on the ownership and custodian.

PED – Owner of Product and Owner of EWM(Custodian)

Each and every product will be associated with PED. Without PED, we can’t maintain / see any
product without PED in EWM.

Normally a warehouse will be handles or associated with plant code / plant codes. We use the EWM
to manage our goods. In this case Plant is the owner as well as custodian of our products.

So, we need to maintain plant as PED for our product.

But we can’t assign directly the plant code/Location as PED. For this as we maintained in ECC for
stock transport/Affiliates, we need to maintain Plant vendor in ECC.And move to EWM by CIF. And
this Vendor code(BP – Business Partner) needs to be assigned as PED as well as custodian.

***Plant vendor – BP in EMW, we need to maintain the Identification in BP master data for this
plant vendor with ID type CRM011 – Plant also. CRM004 will be applied automatically while
transferring this from ECC to EWM.

CRM011 – Value must be Plant code not Vendor code

Note: For consignment process it will be different.

SUPPLY CHAIN UNIT:

Address of Warehouse: This is mandatory to maintain warehouse address. We don’t have the option
to maintain address in define warehouse number.

For this we have the option via SCU. By using SCU we can maintain address of the warehouse
number.

By using different Business attributes, system will determine what is this SCU.

This can be created in SAP easy access.

SCM Extended WM – Maintain SCU –

In Alternative tab in SCU,one important setup here is Business Attribute of this SCU. Whether this is
only to store goods, or this is the same location for shipping etc.

INV – warehouse

RO – Goods receipt office

SO – Shipping office etc.…

---

Once it is maintained, this needs to be assigned in Assign Warehouse number.

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Assign
warehouse number

5
Here we need to maintain the below details:

Supply chain unit - For address of warehouse

Custodian – Our Plant vendor

Default PED –Plant vendor (not mandatory to maintain this since this option is to maintain default
value, this is applicable to entire SAP)

Default Ship to –Not required as of now for our Practice

Note: SCU is one time activity. If you changed once the business is started using EWM, this will
lead to errors in existing documents and data.

Maintain Number Ranges:

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Define
Number Ranges

Warehouse Task/Warehouse documents =>

Like TO – It contains all the data relevant to the movements of a product

Warehouse Document – Internal document – visually we can’t see. Once every task is confirmed and
completed, a corresponding document will be generated internally.

Wave=>

Collectively picking the products for different sale order and distribute to each order instead of
individual picking for each order. ( by making different sale order into single internal document –
Common criteria to clubbing may be by Product specific OR Route specific)

Adv: Resource reduction. Time

Warehouse Order =>

Combination of multiple task /Single task- single order – assign to a resource to complete the
activity. (execution of Task – executable package assigned to resources)

WOCR – Warehouse Order Creation Rule

destination area wise, we can group together and create order

Consolidation group =>

Logical grouping of a products

Will discuss later

VAS ORDER =>

Add some additional value to the product before we place it into destination storage type. It
contains the additional service/material required for this activity.

6
Indirect Labor Task =>

Like PMO,BRM, Facilitating team , Bin Cleaning , Floor Cleaning

Physical Inventory =>

Physical inventory count (Year Specific)

Assign number ranges to Warehouse Document (Warehouse Stock posting documents) =>

It contains the sequence number of all the number ranges we maintained for different activity
documents.

Session 8 completed.

Session 9 and 10

STORAGE TYPES

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse

Management ->Master Data ->Define Storage Type

5 control area are there in Storage type definition:

1.General control 2. Put away control 3. Stock removal control 4. Goods Movement control 5.
Replenishment control

1. General Control Area:

a. 12 Storage type roles available – all standard. Not possible to modify these roles and
create new roles.
Standard ST – Blank – Mainly used as final destination of a product
ID Point (A) – Intermediate Storage type where we do some inspection,
tagging like activity (optional)
Pick Point (B)– Reverse of ID Point – In-between Standard ST to Destination
like order fulfilment – for picking. (Optional)
ID Point and Pick Point(C) – if you have space constrain, this type can be
used as both ID and Pick point (Optional)

7
 Staging Area Group (D) – Temporary Unloading or Loading area near Door is
called as Staging area group (like 902/916 in WM)
Work center (E) -Packaging, Labelling like area
Note: Sorting will be done in staging area only. This will not be required ID
point / Work center.
Doors (F) – automatic open and close, electronically controlled doors like
many doors are used in warehouse. There are lot of automated doors.
YARD (G) – Open space Outside of the Warehouse used to Check points of
incoming vehicles,Park Containers, Vehicles etc.
Automatic Storage retrieval (H) (Material Flow Control)-
Roboticenabledinternal goods movement from one area to another area.
mainly used for High racks. Digital connectivity will be used for this. These
type of Machinery / tool/ robotic also defined as Storage type in EWM.
Forklift will not come under this. Since this is manual intervention.
PLC – Programable Logical Control connectivity used such a type of Storage
types. Telegraphic signal will be used.
Work Centre in Staging Area Groups(I)–If you have space constrain, you can
use Staging area group itself work center. Ex : Packing and repacking activity
at Staging area group area itself.
Automatic Warehouse (J) – Controlled by MFS ( Material Flow System) –
This is conveyor system. PLC technology. Here the conveyor system is a
Storage type.
Production Supply (K)–Area to facilitate and keep the material readily
available to execute the production nearby machine/ production area.

b. HU requirement:
Mandatory option
Not Allowed option
Allowed option – with or without HU
HU: Handling unit : A packaging material within it one or more products are
packed and assigned to a Unique identification number.

c. Storage Behavior
i. Standard
ii. Pallet
iii. Bulk – In the floor itself. Row wise. Only HUs are allowed. Loose products we
cannot keep.
d. Quantity Classification
Classifying the quantity of a product 10EA=1CARTON BOX ; 10CARTON BOX
= 1PALLET
In standard there are four options. You can create your own control
B – Carton Box
C – Cases
E – Eaches
P – Pallets.
If you keep Blank, all kind of Quantity Classifications are possible.

2. PUTAWAY CONTROL

8
 a. Confirmation on Put away – required
b. Storage control / Put away completed – It means, this Storage type is the final
destination of the Put away activity. That is placement is completed.
c. Put away Rules:
i. Addition to existing stock/Empty bin – You can take this for practice initially
ii. Empty Bin
iii. General Storage – Open storage area – Single HU
iv. Consolidation group – need understand in packaging chapter
v. Transit warehouse: Staging area for door
d. Split during Putaway - Optional
i. Split during put away – Based on the bin capacity system will split the total
quantities and place the material in the proposed bins
ii. Product Master decides
iii. Do not Split during Put away
e. ID Point Activate
f. Mixed Storage active – Bin Level - Different probability to mix stock - different
product/HU/Batch
g. Mixed storage in HU – Handling Unit level mix probability
h. Delete Stock identification – Final storage type is not required stock identification. If
you activate final storage type, this check box needs to be activated.

3. STOCK REMOVAL CONTROL

a. Confirm Removal – Required - Mandatory
b. Pick point active
4. Goods Movement Control
a. Availability Group - is required for final storage type – Mandatory
i. 002 – Completely Available
ii. 001 – Goods in putaway
iii. 003 – Stock in Production
iv. CD – Cross docking

You can create your own availability group

b. Posting change bin

c. No GI – If you activate this, youcannot do GI from this storage type. For example –
PGI will be from shipping staging area only

Note:

Availability group: 002 – completely available needs to use for final Storage type.

Standard Storage Type - with Availability group 002. Put away rule – add to existing / empty

Staging area group ST – GR Area –

Put away completed indicator should not be active. Since this is temporary storage area only

Put away rules – General – 4

Goods movement control is not required

9
Staging are group ST – GI Area

Same like GR area

Note: Staging area can be GR and GI separately OR single staging area can be used for GR and GI

ST for loading and unloading Point – Door Storage type

Door ST – GR

Put away rules will be General - 4

Door ST - GI

Same as GR

STORAGE SECTION

Sub division of Storage types. This is not mandatory.

For practice, just create two sections for each final Storagetypes; Staging area group one section.

STORAGE BINS

Lowest organizational element in EWM.

Up to 18-digit Char length.

Storage Bin is Unique in EWM. Irrelevant of Storage type or section. Across the Warehouse number,
Storage bins are unique. Since Bin will be created for warehouse level. Header level is Warehouse
number and Bin Number. Storage type will comes lower level, like section. Where as in ECC, it will be
created for a Warehouse number, Storage type at header level.

Create Storage bins:(same as ECC WM)

Storage type is the mandatory to create a Bin. Bin type, bin access type , section are not mandatory

Three ways

Manual creation

Generate through template

Storage bins upload

Requirement Gathering: existing storage bin numbering or newly available 18-digit Char bin. And we
need to ensure same bin number cannot be use for multiple storage types in EWM.

New Bin number required some huge amount of money to print Bin labels. (forexample 1,00,000 bin
may be there)

Manual Creation:

T-Code - /n/SCWM/LS01

10
Storage type is mandatory. Other than storage type all are optional only. Where as in ECC, storage
section is mandatory.

Generate Through Template:

Bin Type: Type of Storage bins. It needs to assign to Storage bin.

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data ->Storage bin ->Define Bin Type

Here you can maintain Maximum weight

Maximum Volume

Maximum capacity

Length, Width

All the units of measurement will come from define warehouse number control. If you don’t
maintain there, this will not update here, and you cannot enter also.

Bin Access Type: This is to control the resource assignment to the bin type. That is how to access
each bin types.

For example, Carton box cannot be handled by forklift, otherwise it will damage. And big Pallet can
not be handled by human resource, this can be handled by forklift. And some Storage type will be
very much height. Manual human resource or Forklift can not be used in this case. For high rack,
there is a stacker Crane is there.

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data ->Storage Bin ->Define Bin Access Type.

It may be manual / machine / Auto(Bin Access Type is not available in ECC)

Storage bin identifier: (This is required to generate bins through Template)

AISLE – Passage area in between two rack is called as AISLE

STACK – Horizontal

LEVEL – Vertical

Bin Sub division: Option is there to go into micro level. Bin sub division like Bin width, Height, depth.
For practice it’s not required.

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Storage Bin -> Define Storage bin identifier for storage bin structures

This is Standard SAP

A - Aisle

S - Stack

L - Level

11
B – Bin sub division

D – Bin depth

New entries also Possible

Session 10 completed

Session 11

Bin Creation through Template

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Storage Bin ->Define Storage bin structure

18-digits ( Bin Char length)

C & N => C is Constant; N is Numeric, Space is Constant

Example: HR01-01-01-01

HR01 is Storage type I am using. This is constant, CCCC

“-“is constant. C

01 is Aisle, Stack and Level – this is numeric

Need to fill 18 Char. If the Bin length is less than 18 char, remaining needs to be fill with Constant C

So, Now the Template will be CCCCCNNCNNCNNCCCCC

While creating the structure, Sequence number will be automatically generated for each sequence.

Structure: in Numeric, you need to maintain as AA SS LL (Aisle Stack level corresponding digit of
template)

Storage type is mandatory here.

Once you maintained, it can be generate by SAP EASY ACCESS

TCode–

Generate Bins from Template: /n/SCWM/LS10. ( In ECC, you can do this in both the way, in IMG as
well as in Easy access)

Mass Change/delete Storage bins - /n/SCWM/LS11

Upload Method:

You can use LSMW

And standard cockpit also available in easy access.

SCM Extended Warehouse management -> Extended warehouse management -> Interfaces ->
Data Upload -> Load Storage Bins

T code - /n/SCWM/SBUP

REPORT: Single Cockpit to view all reports =>

12
T Code - /n/SCWM/MON => from this also you can see and mass change bins

Even though bin ha stock, you can do mass change except deletion.

Session 11 Completed

Session 12:

ACTIVITY:

What kind of goods movements is going to happen

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Activity Areas -> Define Activity

In Every Activity, there will be a “Process category” to define what the activity is defined

Like Putawy, Picking etc

ACTIVITY AREA ( THIS CONCEPT IS AMANDATORY ONLY FOR PHYSICAL INVENTORY)

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Activity Areas -> Define Activity area

Logical grouping of storage bins to perform certain activity like

Putaway

Stock removal

Posting change

Physical inventory

This can be combination of different storage types or single storage types or Partial from one
storage and partial from another storage type

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Activity Areas -> Assign storage Bins to Activity area

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Activity Areas -> Define Sort Sequence for Activity Area

You can define how the system will sort the storage bin to perform the required activity. Bin
Sorting is one of the cutover activity.

13
For this you need to go to easy access to execute this sorting

SCM Extended Warehouse management -> Extended warehouse management ->Master data ->
Storagebin -> Sort storage bins

T code - /n/SCWM/SBST

This needs to practice by changing the configuragtion with different sort sequence

This Bis sorting will be updated in each bin. You can see in Display bin /n/SCWM/LS03

Mass Upload – Sorting of Bins

Easy access TCode - /n/SCWM/SRTUP

Instead of doing all above activities, once you defined the Activity, you can perform the below path.
This will do all the above assignments. You can modify the sort sequence based on business
requirement.

SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management -> Master
Data -> Activity Areas -> Generate Activity Area from Storage Type

CONSOLIDATION GROUP: Logical grouping of a products.

Define number range of consolidation group in Define Warehouse Number range

Assign this t the specific process in below Path

SCM Extended Warehouse Management -> Extended Warehouse Management -> Goods Receipt
Process -> Deconsolidation -> Assign Number Range Intervals to Consolidation Groups

Session 12 completed

Session 13

STAGING AREA GROUP

14
STAGING AREA: Normally the area nearby door where we receive the goods and temporarily keep it
to check and sort.

Group of the staging area is STAGING AREA GROUP. This is nothing but the Storage type with the ST
type Role D - Staging area.

So STAGING AREA GROUP is Storage Type

STAGING AREA is Section with in the Storage Type.

Staging area can be maintained for Inbound and Outbound. Or Both in the same area.

In such a section you can have one or more bins. These bins are called as staging bays.

Config:

1. Create a ST with role D – Define Storage Type

Put away role – General. Since we won’t maintain any racks in staging area

2. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->

Master Data -> Staging Areas -> Define Staging Area

Note: Staging area is Section and Staging area group in Storage type with role D

This is the combination of Staging area group, staging area and this combination is
associated with either GR or GI or Both. As well as

In requirement gathering we need to make sure that how they are handling Staging area.

3. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->

Master Data -> Staging Areas -> Define Staging area and Door determination group

In this config we, just create a “Staging area and door” determination group.

Scenario: to receive goods like heavy weight materials/product and it needs to be kept in the
staging area which is capable to keep tons of weight. And in this staging area I will have
crane facility to handle the heavy weight materials/products.

For Normal door, we have the normal staging area without crane.

For this scenario, we have the concept to determine suitable door and staging area.

4. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->

Master Data -> Define warehouse DOOR

Combination of Warehouse Door and Loading direction. Loading direction can be Inv=bound
or Outbound or Both

5. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->

Master Data -> Assign Staging Area Door determination group to Door

Just joining the above two

6. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->

Master Data -> Assign staging area to Door

15
WORK CENTER

Area to perform sme activity like acking / repacking / wrapping

Config:

1. Storage type with role “e – work center ”

a. Capacity check is not allowed for this work center storage type . need to select “4”
in capacity check.
2. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->
Master Data -> define work center

Here we will assign the work center storage type to new work center. And we will assign the
layout of work center.

Note: instead of creating different work center for each process inside the warehouse, we
can have single work center storage type and different storage bins( for each process)

TO do this, after the config 2, you need to follow up below easy access master data maintain

a. /n/SCWM/LS01 for the work center storage type

b. Master Data -> Work Center -> Define Master Data Attributes ( Tcode
/SCWM/TWORKST).

Here you can assign your bin created for this storage type.

c. Extended Warehouse Management -> Execution -> Packing-General T code

/n/SCWM/PACK
d.
3. SPRO ->SCM Extended Warehouse Management ->Extended Warehouse Management ->
Master Data -> Specify Work Center Layout

In this config , you can control layout of work center and you can see by using the tcode
/n/SCWM/PACK

***************

IMPORTANT CHECK

SPRO -> SCM Extended Warehouse Management-> Interfaces -> ERP Integration -> General
Settings ->Check of ERP-EWM Configuration

Here you can check all basic config is completed or not

SPRO -> SCM Extended Warehouse Management-> Interfaces -> ERP

Integration -> Goods Movements -> Map Storage Locations from ERP
System to EWM
Here we will assign the availability group for each storage location
for our plant and warehouse number
002 – Goods completely available

16
001 – Goods in putaway

Final Step is Execute ERP Distribution Model in ECC

before starting PO process
Final Step is Execute ERP Distribution Model in ECC
before starting PO/IBD process in ECC

Integration with Other SAP Components ->Extended Warehouse Management ->Basic Settings for
EWM Linkage -> Generate Distribute Model from SAP ERP to SAP EWM

Check for your linkining Warehouse number

qRFC – Remote Function calls – Calling the function remotely – Queued (bunch of data)

BAPI Function modules grouped together in the form of distribution model. This model needs to generate in
ERP system against the ERP warehouse(link warehouse)

Final Check

Check of ERP-EWM Configuration

17