Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Road Safety Works

    Uploaded by

    VannurSwamy
    This document provides a summary of road safety interventions and measurements for work on two roads in Anantapur district, Andhra Pradesh, India. It includes the supply and application of hot applied thermoplastic road marking compound and the supply and fixing of molded shanks reflective pavement markers on the roads. The total amount for the work is 144,350 Indian rupees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Road Safety Works

    Uploaded by

    VannurSwamy
    20 views1 page
    This document provides a summary of road safety interventions and measurements for work on two roads in Anantapur district, Andhra Pradesh, India. It includes the supply and application of hot applied thermoplastic road marking compound and the supply and fixing of molded shanks reflective pavement markers on the roads. The total amount for the work is 144,350 Indian rupees.

    Original Description:

    road safety

    Original Title

    Road Safety works

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a summary of road safety interventions and measurements for work on two roads in Anantapur district, Andhra Pradesh, India. It includes the supply and application of hot applied thermoplastic road marking compound and the supply and fixing of molded shanks reflective pavement markers on the roads. The total amount for the work is 144,350 Indian rupees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views1 page

    Road Safety Works

    Uploaded by

    VannurSwamy
    This document provides a summary of road safety interventions and measurements for work on two roads in Anantapur district, Andhra Pradesh, India. It includes the supply and application of hot applied thermoplastic road marking compound and the supply and fixing of molded shanks reflective pavement markers on the roads. The total amount for the work is 144,350 Indian rupees.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Name of Work ::- Name of work:Road Safety Interventions on Koduru Dharmavaram

    road and Mamillakunta Puttaparthy road in Anantapur dist.

    MEASUREMENTS
    S.No Description Quantity Rate Per Amount
    No L B D
    1 2 3 4 5 6 7 8 9 10
    3 Supplying of Hot Applied Thermoplastic road marking Compound with
    2.5mm thick including reflectorising glass beads @250 gms with
    reflectorising glass beads on bituminius surface at 250gms per sqm area ,
    thickness of 2.5 mm exclusive of surface applied glass beads as per IRC:35
    , the material should be of BERGER Company/BERGER equivalent and
    must comply with the following a)white index for the product should be
    range of 60-7- when mesured against standard reference . The applied
    panel 7/8 number must be submitted for the checking up the white index ,in
    the department lab. In case the department approves the white index of any
    vendor, the department engineer may carryout randon checking of the
    applied product at site againest the approved panel. In case of any major
    deviation beyond acceptance llimit, department reserve the right to cancel or
    reject the total supplied consignment of the said material and will compell
    the vendor has to replace the full consignment by the desired material as
    per approved panel at his own cost and dditional demurges may be claimed
    due to losss of man days(as per the rules of the department)b luminee
    factor of the material should be in the range of 80-85% at 45 degree
    centigrade as per AASTHOM 249 c)crack resistance : The applied panel
    cured ofr days under ambient condition and then should be tested as per
    BS3262 Part-1 ,1989 and should pass at the range of '0' degree centigrade
    to '10' degree centigrade D)Adhesion : strong E)softening proit :102 degree
    centigrade F)Dried film finish :smooth and uniform G)Night vision :High as
    directed by the Engineer-in-Chaarge confriming to IS:164-1961 (1st revision
    reafffimed in 1986 ) and clause conforming to IRC-35-1997.
    Mamillakunta -Puttaparthy road 0/0 to 7/8 and KD road from km 0/0 to 35/0

    267.5 420.00 1NO 112350


    4 Supplying and fixing of Molded shanks reflective pavement markers made
    of poycarbonate and ABS moulded and reflective panels with micro
    prismatic lens capable of providing total internal reflection of the light
    entering the lens face and shall support a load of 16000 kg tested in
    accordance to ASTMD 4280 type H and complying to specifications of
    catgory A MOST circular No: RW/NH/ 33023/10/ 97–DO III dated:
    11.06.1997. The height width AND LENGTH shall not exceed 50mm,
    100mm and 100 mm and with minium reflective ares of 13 sqm on each
    side and the slope to the base shall be 35+/- degree. The strength of
    detachment of the integrated cylindrical shanks (of diameter not less than
    19+/- 2 mm and height not less than 30+/-2mm) from the body is to be a
    minimum value of 700kgs .Fixing will be by drilling holes on the road for the
    twin shanks to go inside without nails and using epoxy resin based adhesive
    as per manufaturer's recommendation and complete as directed by the
    engineer.
    Mamillakunta -Puttaparthy road 0/0 to 7/8 and KD road from km 0/0 to 35/0

    4 x 40 160

    160 200.00 1NO 32000


    144350
    Total Amount 144350

    Asst. Executive Engineer(R&B),Puttaparthy

    You might also like