Mining Machinary - I M207

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Course Name : Three years Diploma in Mining Engineering

Year : Second
Subject Title : MINING MACHINERY - I
Subject Code : M207

Teaching and Examination Scheme:


Teaching Scheme* Examination Scheme
L T P Full External Internal External Total Duration
Marks Exam Exam Pas Pass of External
Marks Marks Marks Marks Exams
2 0 0 100 80 20 26 40 3 Hrs.
*Duration of year is considered 28 weeks

A large number of mining machineries are used in the mine right from the
winding of men and material through shafts, transport of material, wire, power for
drilling, cutting and loading of coal on the faces. Pumping operations are also
essential to deal with accumulation of water in underground workings. A mining
engineer should be aware of the types of machineries available for these
operations, their principles of operations and suitability of these equipments
under different conditions, so that they can supervise the selection, installation
and day-to-day operation and elementary maintenance of these equipments.

COURSE OUTCOMES:
After undergoing the course of study the student shall be able to

1. Have general knowledge of electrical supply system


2. Understand basic principles of motors, transformers, instruments etc.
3. Connect above equipments to supply.
4. Understand and implement different units and standards of measurements.
5. Understand the working of I.C. Engines
6. Understand the working of different types of compressors.
7. Select appropriate engineering materials required for various machines
components.
8. Supervise installation, maintenance of ropes and attachments; safe
operation and understand the methods of dealing with breakdowns.
Unit Content Contact Marks
Hours
1. Electric Circuit
Resistance, Current, Voltage, Work, Power and
Energy Ohm’s Law
AC Current – Three phase & Single phase
Storage Batteries- Constructing & working
2. Electrical Machine
DC Machine: Construction & principles of
operating, Magnetization and load
characteristics of series, shunt and compound
generators and motors. Motor starter, speed
control and their field of applications.
AC Motors: Construction and principles of
operation , types of transformers, Efficiency
and Regulations, Auto transformer
Single phase Transformer: Construction and
principles of operation , types of transformers,
Efficiency and Regulations, Auto transformer

3. Power Supply System


Transmission & distributing of Electrical power
by overhead lines and cables Types of cables,
layout of underground cables, shaft cables
protection system and switchgear for mines
like Relays, circuit breaker and fuses.
Earthling and types of earthling Indian Electricity
Rules General and with special reference to mines.

4. Engineering Materials
Chemical composition, properties and uses of
following ferrous Metals: Cast iron, steel, Wrought
iron, manganese steel, nickel steel, chromium steel,
nickel- chromium steel, stainless steel.
Nonferrous: Aluminium, copper, nickel, bronze,
brass, copper nickel alloys, Aluminium alloys etc.
.5 Electronic Components, Fundamental of Semi
conductor, P & N Types, P N Juction, Diodes & their Applications,
Special Diodes, Transistor, Amplifiers

6 Machines
Internal Combustion Engine: Classification, Otto
cycle, Diesel cycle. Two stroke & four stroke
petrol engine. Two stroke & four stroke Diesel
engine. Different systems like fuel injection, fuel
ignition for petrol & diesel engines.
Air compressor: Classification, Definitions of
different terms such as inlet pressure,
discharge pressure, capacity, theoretical
power, break power, free air delivery.
Compressor efficiencies, Working of reciprocating
Compressor. Single stage & multistage. Linter
cooling, After cooling, Conditions of maximum
efficiency, Uses of compressed air (no derivation
and proof of formula.) Rotary compressor: Roots
blower, vane type blower, screw compressor,
turbo blower, turbo compressor, centrifugal &
axial flow compressor (no derivation of formula.)
Brakes & Clutches: Breaks : Classification,
Construction & working of block brakes,
internal expanding brakes, hydraulic brakes,
vacuum brakes (no numerical problems)
Clutches : Construction & working of plate
clutches, cone clutches, centrifugal clutch,
claw clutch (no numerical problems)
Hydraulics & Hydraulic machines: Properties of
fluid, components of hydraulic circuits and their
symbols, constructional details and working of
hydraulic of shaper and hydraulic press.
Types of pumps. Working principle of centrifugal
pump, working principle of reciprocating pump.
Uses of pumps in mining industry.
6. WIRE ROPES
6.1. Classification of different types of wire
ropes, Stranded rope, Non stranded rope,
Different types of stranded rope, Different
types of Non stranded rope, Lays of rope,
Different definition like Space factor,
static load, dynamic load, factor of safety.
6.2. Selection of wire rope, Care and
maintenance in ropes, Types of
deterioration in the ropes
6.3. Testing of wire ropes.
6.4. Types of Rope capping, White metal
capping (cone socket type capel),
Wedge type capping (Reliance rope
capel), Capping with split capel and
rivets (Split capel), Recapping, Rope
splicing procedure

STRATEGY OF IMPLEMENTATION:
Conducting theory classes, practical, Industrial visits, seminars, group discussion,
and assignment on different topics shall complete the curriculum for the subject.

REFERENCE BOOKS:
Author Title Publisher
Edward Huges Electrical Technology
H. Cotton Electrical Technology C.B.S. Publisher
B.L. Theraja Electrical Technology S.Chand
Malvino Electronic Principles
P.L.Ballaney Thermal Engineering
Avner Engineering Metallurgy Mcgraw Hill
R.S.Khurmi Theory of Machines S.Chand
D.J. DESHMUKH Central techno
Vol- III
publication, Nagpur.
Coal Field Publisher
S. GHATAK Mine pump, haulage, winding.
Asansol.

You might also like