Scribd
Upload
349 views1 page

Setup Instructions: Step 1: Important

The document provides 7 step-by-step instructions for setting up a Halong Mining cryptocurrency miner: 1. Register the miner's serial number on the manufacturer's website to activate the warranty. 2. Connect the power supply wires to the miner's components and turn the power on. 3. Plug an Ethernet cable from the miner to the network router. 4. Determine the miner's IP address using network scanning tools. 5. Log into the miner's web interface using the default credentials. 6. Configure the mining pool by entering the pool details. 7. The miner should now connect to the pool and begin mining

Uploaded by

Artificer Jeweler
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
349 views1 page

Setup Instructions: Step 1: Important

The document provides 7 step-by-step instructions for setting up a Halong Mining cryptocurrency miner: 1. Register the miner's serial number on the manufacturer's website to activate the warranty. 2. Connect the power supply wires to the miner's components and turn the power on. 3. Plug an Ethernet cable from the miner to the network router. 4. Determine the miner's IP address using network scanning tools. 5. Log into the miner's web interface using the default credentials. 6. Configure the mining pool by entering the pool details. 7. The miner should now connect to the pool and begin mining

Uploaded by

Artificer Jeweler
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Setup Instructions

Also available as a video tutorial:


https://halongmining.com/setup/

Step 1: IMPORTANT: ​Register Your Product: ​https://halongmining.com/warranty/


Important:​ To activate the warranty, go to the product registration page now to enter your miners’ serial numbers.
Firmware update notifications will also be sent to the email address provided.

Step 2 Step 3
Connect the wires from the power supply (PSU) to the Plug an Ethernet Cable into the Miner
miner’s hashcards and control board by inserting the ten
9-pin connectors firmly into place. Plug one end of an ethernet cable into the ethernet port of
the miner’s controller board. Plug the other end of the
ethernet cable into your network’s router or switch.

Step 4 Step 5
Plug an IEC C13 style power cable into the PSU. The Find the Miner’s IP Address:
lower the gauge, the better. Using the power switch found
on the PSU, turn the power on. Determine the miner’s IP Address by running a network
scan. There are various tools that can be found online for
performing a scan. Alternatively, if you log into your router’s
administration panel, it might also display a list of connected
devices and their associated IP addresses.

Locate the device and IP address of the miner. The device


name will appear as “DragonMint”, in the list of connected
devices.

Step 6 Step 7
Log In to the Web Configuration Interface: Configure the Mining Pool:

Open a new tab in your favorite web browser. Using the IP In the left menu, click on ​Settings -> Pools​. Enter your pool’s
address determined in Step 5, navigate to that address in URL, username and worker ID. At the bottom of the page,
the browser. When prompted, enter the default login click the button to save your changes.
credentials for the miner.
Within the next few minutes, if everything is configured
The default username is: admin correctly, you should see activity in your pool’s dashboard.
The default password is: dragonadmin
Note​: You must use a pool that supports AsicBoost
Upon successfully logging in, the miner’s configuration version-rolling. Currently ​ckpool.org​ and s​ lushpool.com
dashboard will appear.

* For help with troubleshooting, contact the Halong Mining support team at: ​https://halongmining.com/contact-us/

You might also like