Equivalencia - AC, Aleados, Inox, Fundiciones, Aleaciones de Cu y Otros 1 PDF

Technical Data
Solid Carbide Drills — Troubleshooting Guide

SOLID CARBIDE
DRILLS
(continued from previous page)
problem source solution
heavy wear on the cutting corners workpiece movement • Stabilize workpiece chucking and check
stability of machine tool.
MODULAR DRILLS
insufficient coolant • Check cooling lubricant. In the case of

internal coolant supply, increase coolant
pressure. In the case of external coolant
supply, adjust positioning of coolant jet.
Cool from both sides.
COMBINATION
TOOLS
wrong drill
• Check drill type, drilling depth, cooling
system, and workpiece material.
CARBIDE TAPS
cutting conditions
HSS AND
• Check cutting parameters at exit. Reduce

feed 15-20% prior to breakout.
hole too big

cutting conditions
• Check cutting values, increase cutting
speed, or reduce feed.
INDEXABLE
DRILLS
• Check clamping accuracy and torque

clamping chuck transmission. Use hydraulic clamping chuck
or high-precision chucking system.
COUNTERBORING
• Check drill diameter. Please notice that

wrong drill
TOOLS
drills are ground to a positive tolerance.

Check concentric running.
hole too small insufficient coolant • Check cooling lubricant. In the case of
PRECISION HOLE
internal coolant supply, increase coolant

FINISHING
pressure. In the case of external coolant

supply, adjusting positioning of coolant jet.
Cool from both sides.
cutting conditions • Reduce cutting speed; increase feed.

INSERTS
wrong drill • Check cutting-edge diameter.
• Check clamping accuracy and torque

hole not cylindrical clamping chuck transmission. Use hydraulic clamping chuck
TECHNICAL DATA
workpiece movement • Stabilize workpiece chucking and check

stability of machine tool.
wrong drill • Check drill type and drilling depth. Use

longer drills.
INDEX
cutting conditions • Reduce feed at entry.
(continued on next page)
I6 To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com.
Technical Data
Solid Carbide Drills — Troubleshooting Guide
SOLID CARBIDE
DRILLS
(continued from previous page)
problem source solution
drill breakage clamping chuck • Check clamping accuracy and torque transmission.
Use hydraulic clamping chuck or high-precision
MODULAR DRILLS
chucking system.
workpiece movement • Stabilize workpiece chucking and check stability

of machine tool.
COMBINATION
wrong drill • Check drill type, drilling depth, ooling system,
TOOLS
and workpiece material.
insufficient coolant • Check cooling lubricant. In the case of internal coolant

supply, increase coolant pressure. In the case of external
coolant supply, adjust positioning of coolant jet. Cool from
both sides.
CARBIDE TAPS
HSS AND
cutting conditions • Check cutting values, and possibly reduce feed.
INDEXABLE
DRILLS
splintering on the cutting corners clamping chuck • Check torque transmission. Use hydraulic clamping chuck
COUNTERBORING
TOOLS
workpiece movement • Stabilize workpiece chucking and check stability
of machine tool.
PRECISION HOLE
wrong drill • Check drill type, drilling depth, cooling system,
FINISHING
and workpiece material. Possibly, use longer drill.
insufficient coolant • Check cooling lubricant. In the case of internal coolant

supply, increase coolant pressure. In the case of external
coolant supply, adjust positioning of coolant jet. Cool from
INSERTS
both sides.
TECHNICAL DATA
cutting conditions • Check cutting values and possibly reduce feed.
INDEX
To place an order, contact Kennametal or your authorized Kennametal distributor, or visit www.kennametal.com. I7
Technical Data
Solid Carbide Drill — TX Drill Applications
SOLID CARBIDE
DRILLS
TX Drills
Fast, Tough, and Economical
TX drills are high-performance tools whose capacity
can be fully utilized with the help of appropriate clamping
fixtures. Kennametal hydraulic chucks are an ideal
MODULAR DRILLS
solution. They increase the productivity of the TX drill

to the maximum level. Optimal concentricity and safe Hydraulic Chucks
transmission of torque result in excellent repeatability multi-stage drill (special)
and longer drill life. The simple handling of the adapters
enables an easy length adjustment, even in the machine.
Tool presetting costs are minimized. For more information
about chucks, refer to the Systems Section of this catalog.
COMBINATION
TOOLS
SEFAS Chamfering Rings profile drilling tools (special)

SEFAS chamfering rings can be mounted directly on
CARBIDE TAPS
Kennametal hydraulic chucks. High-precision drilled

HSS AND
holes can be provided with a chamfer in the same

operating cycle. The SEFAS compact tool also is
compatible with TX drills. This tool style is particularly
slim, enabling work in very narrow applications.
INDEXABLE
BF tool for drilling, chamfering,

DRILLS
and spot facing

COUNTERBORING
TOOLS
BF tool for drilling and profile

countersinking
PRECISION HOLE
FINISHING
INSERTS
SEFAS chamfering ring for

drilling and chamfering
TECHNICAL DATA
SEFAS drilling and chamfering

INDEX
Technical Data
Solid Caride Drills — TX Drill Applications
SOLID CARBIDE
DRILLS
The excellent stability of the TX drill enables it to be used for drilling through inclined planes,
intersecting holes, and cored holes.
MODULAR DRILLS
cored hole drilled hole
COMBINATION
TOOLS
inclined planes intersecting holes cored holes
CARBIDE TAPS
Coolant Pressure
HSS AND
The diagram at left shows the coolant pressure as a
necessary coolant pressure (bar) (1 psi = .068948 bar) function of the hole diameter. The higher the coolant
pressure, the better the drilling result. Tool life and hole
quality improve with increasing coolant flow.
Drilling on Inclined Surfaces
INDEXABLE
When drilling on inclined or curved surfaces, use a
DRILLS
favorable values lower feed than the standard value. The feed reduction
necessary depends on the angle of inclination of the
workpiece surface. After the drill margins are fully
engaged in the workpiece, increase the feed to the
coolant pressure too low standard value (100%).
COUNTERBORING
TOOLS
hole diameter d1 [mm]
PRECISION HOLE
FINISHING
inclination reduced feed
reduced feed
α (% of standard value)
TX411
1° 80%
INSERTS
2° 50%
3° 30%
100% feed
Surfaces with a greater inclination need a spot-face TECHNICAL DATA

(for example with a milling cutter).
INDEX
Technical Data
Solid Carbide Drills — Horsepower, Torque, and Thrust Values
SOLID CARBIDE
DRILLS
Graph Illustrations
The following graphs represent actual drill values taken in an ideal machining environment under
ideal operating conditions. This analysis was conducted in a machine lab with various scientific
capabilities. Actual values may not be duplicated in a true manufacturing operation. In-plant
results may be higher or lower, depending on a number of conditions or variables. Each graph
is intended to be used as reference only. Horsepower and feed force are charted together
MODULAR DRILLS
since thrust is the largest component of overall horsepower consumed. Speeds and feeds
used for the horsepower calculations are recommended starting speeds and feeds. Internal
or external coolant was used during this evaluation, where applicable.
• Horsepower is calculated at the cut (HPc).
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
Horsepower Calculations — Aluminum

Feed Force & Power
TF105 Drill Torque

6061 T6 Aluminum
INDEXABLE
(750 sfm) TF105 Drill

DRILLS
6061 T6 Aluminum
(750 sfm)
feed force (lbs.)
torque (ft.-lbs.)
power (hp)
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
drill diameter (inches) drill diameter (inches)
Feed Force & Power
Torque
INSERTS
TX411 Drill
6061 T6 Aluminum
(750 sfm) TX411 Drill
6061 T6 Aluminum
(750 sfm)
feed force (lbs.)
torque (ft.-lbs.)
power (hp)
TECHNICAL DATA
INDEX
Technical Data
Solid Carbide Drills — Horsepower Calculations — Ductile Cast Iron
SOLID CARBIDE
DRILLS
Feed Force & Power
SE255HPC Drill Torque
80-55-06 Ductile Cast Iron
MODULAR DRILLS
(550 sfm) SE255HPC Drill
80-55-06 Ductile Cast
Iron (550 sfm)
feed force (lbs.)
power (hp)
torque (ft.-lbs.)
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
Feed Force & Power
INDEXABLE
SE225 Drill Torque
DRILLS
80-55-06 Ductile Cast Iron
(550 sfm) SE225 Drill
80-55-06 Ductile Cast
Iron (550 sfm)
feed force (lbs.)
power (hp)
torque (ft.-lbs.)
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Solid Carbide Drills — Horsepower Calculations — Gray Cast Iron
SOLID CARBIDE
DRILLS
Feed Force & Power

Torque
SE255HPC Drill
30K PSI Gray Cast Iron SE255HPC Drill
MODULAR DRILLS
(700 sfm) 30K PSI Gray Cast Iron

(700 sfm)
torque (ft.-lbs.)
feed force (lbs.)
power (hp)
COMBINATION
TOOLS
drill diameter (inches)

CARBIDE TAPS

HSS AND
Feed Force & Power

Torque
TF105 Drill
30K PSI Gray Cast Iron TF105 Drill
(330 sfm) 30K PSI Gray Cast Iron
INDEXABLE
(330 sfm)
DRILLS
torque (ft.-lbs.)
feed force (lbs.)
power (hp)
COUNTERBORING
TOOLS

PRECISION HOLE

FINISHING
Feed Force & Power

Torque
TX411 Drill?30K PSI Gray
Cast Iron?(360 sfm) TX411 Drill?30K PSI Gray
Cast Iron?(360 sfm)
INSERTS
torque (ft.-lbs.)
feed force (lbs.)
power (hp)
TECHNICAL DATA

INDEX
Solid Carbide Drills — Horsepower Calculations — Steel
SOLID CARBIDE
DRILLS
Feed Force & Power
Torque
SE211HP Drill SE211HP Drill
AISI 4140 Steel
MODULAR DRILLS
AISI 4140 Steel
(600 sfm) (600 sfm)
torque (ft.-lbs.)
feed force (lbs.)
power (hp)
COMBINATION
TOOLS
drill diameter (inches) drill diamter (inches)
CARBIDE TAPS
HSS AND
Feed Force & Power Torque
SE225 Drill SE211HP Drill

AISI 4140 Steel AISI 4140 Steel
(350 sfm) (600 sfm)
INDEXABLE
DRILLS
torque (ft.-lbs.)
feed force (lbs.)
power (hp)
COUNTERBORING
TOOLS
drill diamter (inches)
PRECISION HOLE
FINISHING
Horsepower Calculations — Stainless Steel
INSERTS
Feed Force & Power
Torque
SE211 HP Drill
Austenitc Stainless Steel SE211 HP Drill
(270 sfm) Austenitc Stainless Steel
(270 sfm)
TECHNICAL DATA
torque (ft.-lbs.)
feed force (lbs.)
power (hp)
INDEX
drill diameter (inches) drill diamter (inches)
Technical Data
Combination Tools — Application Examples Using the BF Tool
SOLID CARBIDE
DRILLS
To quote a special tool, please contact our Custom Solutions department.
drilling, chamfering, and facing a cast bracket countersinking for countersunk head screws
MODULAR DRILLS
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
tapped hole with protection countersinking centering with protection countersinking

INDEXABLE
DRILLS
COUNTERBORING
TOOLS
60° countersinking and plane surface with corner radius countersinking for round sealing rings
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
countersinking for aluminum rim drilling and facing

INDEX
Technical Data
Combination Tools — SEFAS Assembly Instructions and Torque Values
SOLID CARBIDE
DRILLS
1) Mount the drill into the basic body “A.” Use
A-style round shanks only. Do not use F-style
with clamping flat.
2) Mount inserts into pockets “B.”
3) Adjust to required drilling depth using axial
adjustment screw “1.”
MODULAR DRILLS
4) Rotate drill so that the inserts are behind the
margin. Inserts should be aligned on the margin
clearance, not the flute.
5) Tighten both clamping elements “C” with
a torque wrench to specified requirements
(see chart below). Preset slots should be set
parallel to shank. Use a flathead screwdriver
COMBINATION
to align preset slots.
TOOLS
6) Press the insert against the drill and tighten the
insert clamps. There will be a slight gap between
drill and insert if tightened to correct torque
specifications.
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
preset slots preset slots
correct alignment incorrect alignment
COUNTERBORING
TOOLS
Inch
2 drill clamp torque insert clamp torque
1 drill 3
axial clamp insert 4
PRECISION HOLE
D1 adjustment screw screw Nm ft-lbs clamp Nm ft-lbs wrench adapter
FINISHING
.156 - .188 360.516 360.650 7 5.2 360.550 2 1.5 170.240
.188 - .250 360.510 360.651 8 5.9 360.550 2 1.5 170.240
.250 - .313 360.510 360.652 8 5.9 360.550 2 1.5 170.240
.313 - .375 360.510 360.653 10 7.4 360.550 2 1.5 170.232
.375 - .438 360.513 360.654 15 11.1 360.551 4 3.0 170.232
.438 - .500 360.513 360.655 15 11.1 360.551 4 3.0 170.232
INSERTS
.500 - .563 360.511 360.656 20 14.8 360.551 4 3.0 170.233
.563 - .625 360.511 360.657 30 22.1 360.551 4 3.0 170.233
.625 - .688 360.511 360.658 45 33.2 360.551 4 3.0 170.234
.688 - .750 360.511 360.659 5 33.2 360.551 4 3.0 170.234
TECHNICAL DATA
Metric
2 drill clamp torque insert clamp torque
1 drill 3
axial clamp insert 4
D1 adjustment screw screw Nm ft-lbs clamp Nm ft-lbs wrench adapter
4,0 - 6,0 360.510 360.650 7 5.2 360.550 2 1.5 170.240
INDEX
6,0 - 8,0 360.510 360.651 8 5.9 360.550 2 1.5 170.240

8,0 - 10,0 360.510 360.652 10 7.4 360.550 2 1.5 170.232
10,0 - 12,0 360.513 360.653 15 11.1 360.551 4 3.0 170.232
12,0 - 14,0 360.511 360.654 20 14.1 360.551 4 3.0 170.233
14,0 - 16,0 360.511 360.655 30 22.1 360.551 4 3.0 170.233
16,0 - 18,0 360.511 360.633 45 3.23 360.551 4 3.0 170.234
Technical Data
Modular Drills— KenTIP Application Guidelines
SOLID CARBIDE
DRILLS
Mounting the KenTIP Inserts

MODULAR DRILLS
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
Cooling the KenTIP Drill

INDEXABLE
DRILLS
COUNTERBORING
TOOLS
External
cooling Dry machining
PRECISION HOLE

FINISHING
INSERTS
only when using the 3 x D tool bodies
Note
TECHNICAL DATA
Max. 0,002 mm
INDEX
(.001")
Max. 0,02 mm
(.001")
Technical Data
Modular Drills — Application Notes — Pre-Centering
SOLID CARBIDE
DRILLS
Centering using PCM inserts HPM inserts of the follower drill Pre-centering with FAS centering tool
MODULAR DRILLS
COMBINATION
TOOLS
Why is pre-centering necessary?
CARBIDE TAPS
• Generally speaking, for drilling depths 5 times the nominal diameter and above (5 x d).
HSS AND
• In unstable conditions (workpiece and tool clamping).
Why pre-center using PCM inserts?
INDEXABLE
• Soft cut entry of follower drill due to 150° point angle of the PCM insert.
DRILLS
• No extension of the follower drill in the entry area.
• No breaks at the cutting edges.
COUNTERBORING
TOOLS
What happens if...
... a center cannot be used for technical reasons?
Spot drill with “normal” insert and reduced cutting data (approximately 1⁄2 vc and approximately 1⁄2 vf) then continue drilling
with regular cutting data without lifting off/stopping.
PRECISION HOLE
FINISHING
...there is no suitable PCM cutting insert in the standard range (ø)?
• Manufacture to order using PCM geometry and k7 tolerance
or
• Center using the same cutter insert as for the follower drill but without the cutting edges penetrating the workpiece
INSERTS
(spot drill ø approximately 90% of drill ø d1).
...only one tool body is required?

TECHNICAL DATA
Enter the workpiece with 50% feed until the cutting edges and the heels have penetrated the hole, then continue drilling
without lifting off/stopping using regular cutting data.
Other problems...
INDEX
Short hole drilling with pre-centering support tool?

Up to 1 x nominal diameter (1 x d) possible.
Technical Data
Modular Drills — Technical Date — Workpiece Rigidity
SOLID CARBIDE
DRILLS
MODULAR DRILLS
correct incorrect
Because KSEM drills deliver much higher penetration rates, it is important that the workpiece receive adequate support.
COMBINATION
TOOLS
chamfer tool
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
When drilling and chamfering, drill into the solid When drilling on inclined surfaces ≤ 5°, Before drilling on curved or inclined surfaces
first, then chamfer. reduce feed by 50% until entire drill >5°, pre-machining (ø D + .004) is required.
COUNTERBORING
margin is in the cut, then resume full feed.

TOOLS
PRECISION HOLE
FINISHING
INSERTS
When drilling on turning machines, positioning

the drill on center is a must.
TECHNICAL DATA
CAUTION
During through-hole operations, a slug or
INDEX
disc is produced as the tool breaks through

the workpiece. When the drill is stationary
and the workpiece is rotating, this slug may
be hurled from the chuck by centrifugal
force. Provide adequate shielding to protect
all bystanders.
When drilling stacked plates, care must be taken. The KSEM drill will
push a slug.
Technical Data
Modular Drills — Reconditioning Information
SOLID CARBIDE
DRILLS
L min.
MODULAR DRILLS
Minimum insert length after reconditioning
L new
COMBINATION
TOOLS
inch mm
D
diameter range L min. L new seat size diameter range L min. L new
CARBIDE TAPS
.492 - .531 .335 .378 C 12,50 - 13,50 8,5 9,6
HSS AND
.532 - .570 .350 .398 B 13,51 - 14,50 8,9 10,1
.571 - .624 .370 .417 A 14,51 - 15,87 9,4 10,6
.625 - .709 .406 .457 1 15,88 - 18,00 10,3 11,6
.710 - .786 .441 .496 2 18,01 - 19,99 11,2 12,6
.787 - .866 .476 .535 3 20,00 - 22,00 12,1 13,6
INDEXABLE
.867 - .945 .512 .575 4 22,01 - 24,00 13,0 14,6
DRILLS
.946 - 1.024 .547 .614 5 24,01 - 26,00 13,9 15,6
1.025 - 1.102 .583 .654 6 26,01 - 28,00 14,8 16,6
1.103 - 1.181 .618 .693 7 28,01 - 30,00 15,7 17,6
1.182 - 1.260 .654 .732 8 30,01 - 32,00 16,6 18,6
COUNTERBORING
1.261 - 1.417 .724 .811 9 32,01 - 36,00 18,4 20,6
For more information about drill reconditioning,.795
see page H532..890
TOOLS
1.418 - 1.575 10 36,01 - 40,00 20,2 22,6
PRECISION HOLE
FINISHING
Wear or failure mechanisms to avoid when applying KSEM Insert Blades
The blades (shown below) typically cannot be reconditioned as the amount removed during the grinding process would place the cutting edge
INSERTS
below the steel pocket of the KSEM body.
TECHNICAL DATA
INDEX
large fracture on corners excessive margin wear
Technical Data
Modular Drills — Cutting Forces — KenTIP
SOLID CARBIDE
DRILLS
Performance Diagrams Note:

The diagrams are used to determine the feed force, drive power, and torque. They are based on cutting force measurements
in steel with a tensile strength of: Rm = 800 N/mm2. The base cutting speed used is: vc = 80 m/min (260 sfm).
MODULAR DRILLS
Drive Power Feed Force Torque
Ps [kW]Drive Power Ff [kN]Drive Power Md [Nm]Drive Power

4,5 3,0 30
f = 0,35 mm
f = 0,35 mm
COMBINATION
4,0 f = 0,35 mm
2,5 25
TOOLS
3,5
3,0 2,0 20
2,5
f = 0,25 mm
1,5 15
2,0 f = 0,25 mm
CARBIDE TAPS
f = 0,15 mm
HSS AND
1,5 f = 0,15 mm 1,0 10 f = 0,25 mm

1,0 f = 0,15 mm
0,5 5
0,5
0 0 0
0 8 10 12 14 16 0 8 10 12 14 16 0 8 10 12 14 16
INDEXABLE
Drill diameter D1 [mm] => Drill diameter D1 [mm] => Drill diameter D1 [mm] =>
DRILLS
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Modular Drills — Application Guidelines — DRILL-FIX — Inch
SOLID CARBIDE
DRILLS
operation description
spot drilling and drilling through on inclined surfaces Up to a 30 inclination angle is possible without reducing the
cutting parameters. For angles between 30-40, reduce feed force
MODULAR DRILLS
max. 45° at incline surface by 50% (compared to values shown above in
starting conditions).
COMBINATION
TOOLS
max. 45°
interrupted cuts For problem-free drilling in interrupted cuts (cross drilling, etc.),
reduce the cutting force and feed by 30% to maintain maximum
CARBIDE TAPS
stability of the machine and clamping mechanisms.
HSS AND
INDEXABLE
DRILLS
drilling of stacked plates This is not possible with the standard DRILL-FIX series drills.
COUNTERBORING
A final disc will form when the drill breaks through.
Special DRILL-FIX drills may be quoted upon request for
TOOLS
stacked plate drilling.
PRECISION HOLE
FINISHING
When DRILL-FIX tools are used as a boring tool, offset the
drill in the direction of the outer insert. Watch the outer insert
for wear because it is cutting more metal than the inner insert
INSERTS
and may require more frequent indexing.
TECHNICAL DATA
WARNING
During through-hole operations, a slug or
INDEX
disc is produced as the tool breaks through

the workpiece. When the drill is stationary
and the workpiece is rotating, this slug may
be hurled from the chuck by centrifugal
force. Provide adequate shielding to
protect all bystanders.
Technical Data
Indexable Drills — Cutting Forces — DRILL FIX — Inch
SOLID CARBIDE
DRILLS
Power: These charts are based on machining experiences using steels Coolant Application: DRILL-FIX drills must always be applied with coolant
with a hardness of 200-250 HB, and on a cutting speed of 650 sfm. lubricant. The higher the coolant rate, the better the drilling performance.
MODULAR DRILLS
horsepower coolant
gal./.in
COMBINATION
TOOLS
drill diameter (in.)

CARBIDE TAPS

HSS AND
INDEXABLE
DRILLS
coolant
feed force rotating
pressure
(ft.-lbs.)
COUNTERBORING
(psi)
TOOLS
stationary
PRECISION HOLE
drill diameter (in.) drill diameter (in.)

FINISHING
INSERTS
torque
TECHNICAL DATA
(ft.-lbs.)
INDEX
Technical Data
Indexable Drills — Cutting Forces — Drill Fix — Metric
SOLID CARBIDE
DRILLS
Drive power Torque
⇑ Drive power Ps [kW] ⇑ Torque Md [Nm]
f = 0,2 mm f = 0,2 mm
30 400
MODULAR DRILLS
f = 0,1 mm
300
f = 0,1 mm
20
200
COMBINATION
TOOLS
10
100
f = 0,05 mm
f = 0,05 mm
CARBIDE TAPS
HSS AND
0 0
0 20 30 40 50 60 70 80 0 20 30 40 50 60 70 80
Drill diameter d1 [mm] ⇒ Drill diameter d1 [mm] ⇒
Feed force
⇑ Feed force Ff [kN]
INDEXABLE
DRILLS
10
f = 0,2 mm
8 NOTE: The diagrams are based on empirical values

and apply to drilling steel materials with a strength of:
COUNTERBORING
Rm = 600 – 900 N/mm2.
TOOLS
The cutting speed taken as a basis is:
6 vc = 200 m/min.
Guidelines for coolant pressure and quantity.

4
NOTE: DRILL-FIX drills should always be used with cooling lubricant.
PRECISION HOLE
f = 0,1 mm The more intensive the cooling, the better the drilling performance.
f = 0,05 mm
FINISHING
2
0
0 20 30 40 50 60 70 80
Drill diameter d1 [mm] ⇒
INSERTS
Coolant quantity Coolant pressure
⇑ Coolant quantity V [l/min] ⇑ Coolant pressure p [bar]
30 7
TECHNICAL DATA
25 6
20 5
15 4
INDEX
10 3
5 2
0 0
0 20 30 40 50 60 70 80 0 20 30 40 50 60 70 80
Drill diameter d1 [mm] ⇒ Drill diameter d1 [mm] ⇒
Technical Data
Indexable Drills — Troubleshooting Guide for DRILL-FIX
SOLID CARBIDE
DRILLS
problem solution
inner cutting edge cracking

On lathes:
MODULAR DRILLS
Check machine alignment.

Check clamping accuracy. If tool clamping cannot be improved
and/or optimum machine stability is doubtful, reduce feed by 30%.
Use tougher carbide grade.
COMBINATION
TIP: Grades can be mixed to achieve optimum performance.

TOOLS
EXAMPLE: Use grade KC7225 in the inside pocket

with KC7140 in the outside pocket.
CARBIDE TAPS
chip evacuation not optimal

Increase coolant pressure and volume (coolant helps support chip evacuation
HSS AND
as well as cooling the cutting edges).

Optimize chip control for a given application.
Increase cutting speed by 20%.
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
PRECISION HOLE
excessive insert wear Increase coolant pressure and volume.

FINISHING
Reduce cutting speed by 20%

Use a more wear-resistant grade.
INSERTS
poor drill hole quality Increase coolant pressure and volume.

TECHNICAL DATA
Check clamping accuracy (tool and workpiece) for possible improvement.
TIP: Use higher speed with lighter feed to produce better hole quality.
INDEX
Technical Data
Indexable Drills — Application Guidelines — HTS-C Drills
SOLID CARBIDE
DRILLS
incorrect correct
Spot drilling
For plain/straight surfaces, no spot drilling is required. For
centering, the center drill diameter should be considerably
smaller than the pilot drill diameter.
MODULAR DRILLS
COMBINATION
TOOLS
incorrect correct
Spot drilling and drilling through on inclined surfaces

Up to an 8° inclination angle is possible. Drilling through at a
CARBIDE TAPS
maximum of 4° is possible, otherwise, a pre-facing operation
HSS AND
is necessary.
over
INDEXABLE
DRILLS
correct
COUNTERBORING
TOOLS
Multi-stage drill hole
HTS-C series drills are not recommended for boring operations.
First, use the HTS-C drill to drill a larger diameter hole. Then, use
a solid carbide drill for smaller holes. Optimum centering of the solid
carbide drill is possible on the drill hole of the pilot drill.
incorrect
PRECISION HOLE
FINISHING
INSERTS
Drilling of stacked plates
This is not possible with HTS-C series drills because
a final disc forms when the drill breaks through.
TECHNICAL DATA
CAUTION
During through-hole operations, a slug or disc
is produced as the tool breaks through the
INDEX
workpiece. When the drill is stationary and the

workpiece is rotating, this slug may be hurled
from the chuck by centrifugal force. Provide
adequate shielding to protect all bystanders.
Technical Data
Indexable Drills — Troubleshooting Guide for HTS-C Drills
SOLID CARBIDE
DRILLS
problem solution
pilot drill cracking
MODULAR DRILLS
On lathes:
• Verify that the tool is centered correctly. Readjust machine, if necessary.
• Check clamping accuracy (tool and workpiece) for possible improvement.
• Use pilot drill B503 in HSS grade AS3.
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
inner insert cracking
• Use tougher carbide grade.

• Reduce feed by 20%.
INDEXABLE

DRILLS
COUNTERBORING
TOOLS
outer insert cracking

PRECISION HOLE
FINISHING
• Use tougher carbide grade and/or stronger insert geometry.

• Reduce feed by 20%.
• When drilling through, reduce feed by 50%.
INSERTS
TECHNICAL DATA
extensive pilot drill wear
• Use coated carbide pilot drill B504 in grade CS3.

• Increase coolant pressure and volume.
INDEX
• Reduce cutting speed by 20%.
Technical Data
Indexable Drills — Troubleshooting Guide for HTS-C Drills
SOLID CARBIDE
DRILLS
problem solution
excessive insert wear
MODULAR DRILLS
On lathes:
Use a more wear-resistant carbide grade.
Increase coolant pressure and volume.
Reduce cutting speed by 20%.
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
chip breaking not optimal
Optimize chip control for given application.

Increase cutting speed by 20%; reduce feed by 20%.
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
chip evacuation not optimal, poor drill hole quality
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Indexable Drills — Cutting Forces — HTS-C Series Drills — Inch
SOLID CARBIDE
DRILLS
HTS-C Pilot Drill Repointing Data

MODULAR DRILLS
COMBINATION
catalog number grade included angle A primary relief angle B chisel angle C gash angle D web thickness E gash depth F
TOOLS
B504S04000 G13 130° 14° 58° ± 3° 20° ± 2° .0118 - .004 .0196 ± .004
B504S05000 G13 130° 14° 58° ± 3° 20° ± 2° .0114 ± .004 .0224 ± .004
B504S06000 G13 130° 14° 58° ± 3° 20° ± 2° .0129 ± .004 .0129 ± .004
B504S08000 G13 130° 14° 58° ± 3° 20° ± 2° .0196 ± .004 .0338 ± .004
B504S10000 G13 130° 14° 58° ± 3° 20° ± 2° .0267 ± .004 .0452 ± .004
CARBIDE TAPS
B504S04000 CS3 130° 14° 58° ± 3° 20° ± 2° .0118 - .004 .0196 ± .004
HSS AND
B504S05000 CS3 130° 14° 58° ± 3° 20° ± 2° .0114 ± .004 .0224 ± .004
B504S06000 CS3 130° 14° 58° ± 3° 20° ± 2° .0129 ± .004 .0129 ± .004
B504S08000 CS3 130° 14° 58° ± 3° 20° ± 2° .0196 ± .004 .0338 ± .004
B504S10000 CS3 130° 14° 58° ± 3° 20° ± 2° .0267 ± .004 .0452 ± .004
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
Power: This chart is based on machining experiences using steels Coolant Application: Efficient cooling of HTS-C drills is ensured
with a hardness of 200-250 HB, and on a cutting speed of 350 sfm. by an internal coolant capability.
recommended coolant: emulsion 6-8%
minimum coolant pressure: stationary drill 30 psi
rotating drill 90 psi
PRECISION HOLE
FINISHING
INSERTS
coolant
horsepower (gal./min.)
F=.008 in/rev. ideal
F=.004 in/rev.
F=.002 in/rev.
TECHNICAL DATA
critical

INDEX
Technical Data
Indexable Inserts for HTS and HTS-R Drills
SOLID CARBIDE
DRILLS
HTS-R
When choosing indexable inserts for HTS drills, Kennametal often recommends
different grades and/or geometries for inner pockets versus outer pockets. This
practice optimizes chipbreaking action and insert tool life. The inner pockets are
MODULAR DRILLS
defined below.
COMBINATION
TOOLS
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
inner pockets
pilot drll
COUNTERBORING
TOOLS
HTS
PRECISION HOLE
FINISHING
clamping screw
adjusting screw
INSERTS
TECHNICAL DATA
HTS–C and HTS-R, HTS Adjustable Pilot Drills
The pilot drill used the HTS, HTS–R and HTS-C modular drilling
systems can be adjusted to accommodate changes in either machining
conditions or length alterations due to resharpening. The pilot drill is
adjusted from the rear of the drill head via an axial adjusting screw.
Once the appropriate length is established, the drill is secured in position
using the set screw located on the side of the drill head. The HTS-C pilot
drill can be adjusted with the head mounted on the drill shank, using
INDEX
the side adjusting screw. The HTS-C pilot drill is secured using a radial
clamping screw. See the HTS and HTS-C product pages in this catalog
for the appropriate pilot drill set length.
Technical Data
Indexable Drills — Application Guidelines — HTS Drills
SOLID CARBIDE
DRILLS
incorrect correct Spot drilling

For plain/straight surfaces, no spot drilling is required. Spot drilling is
recommended when using HTS at a long L/D ratio, especially for horizontal
applications. In this case, the center drill diameter should be considerably
smaller than the pilot drill diameter.
MODULAR DRILLS
COMBINATION
TOOLS
incorrect correct
Spot drilling and drilling through* on inclined surfaces
Spot drilling on inclined surfaces is not possible. A pre-facing operation
CARBIDE TAPS
is required for spot drilling and drilling through on inclined surfaces.

HSS AND
INDEXABLE
DRILLS
COUNTERBORING
correct Multi-stage drill hole

TOOLS
HTS drills are not recommended for boring operations. First,

use the HTS drill to drill a larger diameter hole. Then, use a
solid carbide Dynapoint drill, KSEM, or HTS-C drill to drill the
incorrect smaller holes.
PRECISION HOLE
FINISHING
INSERTS
Drilling of stacked plates

Not possible with HTS drills — a final disc forms
when the drill breaks through.
TECHNICAL DATA
CAUTION
During through-hole operations, a slug or disc
is produced as the tool breaks through the
workpiece. When the drill is stationary and the
workpiece is rotating, this slug may be hurled
from the chuck by centrifugal force. Provide
INDEX
adequate shielding to protect all bystanders.
*When drilling through, a small shoulder will be produced on breakthrough

as the pilot drill is no longer cutting.
Technical Data
Indexable Drills — Troubleshooting Guide for HTS Drills
SOLID CARBIDE
DRILLS
problem solution
pilot drill cracking On lathes:
MODULAR DRILLS
Verify that the tool is centered correctly. Readjust machine,
if necessary.
Check clamping accuracy (tool and workpiece)
for possible runout.
COMBINATION
TOOLS
insert cracking Use tougher carbide grade.
Check clamping accuracy (tool and workpiece)
CARBIDE TAPS
HSS AND
for possible runout.
INDEXABLE
DRILLS
excessive insert wear Use coated pilot drill AS3.
COUNTERBORING
Reduce speed by 20%.
TOOLS
Use wear & resistant carbide grade.
PRECISION HOLE
FINISHING
chip breaking not optimal Optimize chip control for given application
by using chipbreaker geometry such as HP or MD.
Increase cutting speed by 20%; reduce feed by 20%.
INSERTS
TECHNICAL DATA
chip evacuation not optimal, poor hole quality Increase coolant pressure and volume.
INDEX
Technical Data
Indexable Drills — HTS Deep-Hole Drilling System — Inch
SOLID CARBIDE
DRILLS
Adjusting the HTS Drill Diameter
A
• Change drill diameter by adjusting the outer cartridge.
MODULAR DRILLS
The outer cartridge is bolted to the head and can be

shortened to drill smaller diameters.
• Shorten at 90° to the contact face “A”
reduce here and the support face “B.”
slotted hole
• Shortening reduces the effective drill diameter
by double the length removed.
COMBINATION
TOOLS
inner outer
CARBIDE TAPS
HSS AND
The HTS deep-hole drilling system offers a precise method of adjusting the hole Example: If the standard drill cuts 3.400" and the required diameter is 3.350",
diameter. The cartridges supplied with each HTS system are designed to cut the the difference is .050. Grind .025 from the inner side of the outer cartridge.
largest diameter in its range. Caution must be taken when altering a cartridge. It’s critical that the chamfers
To adjust the HTS cutting diameter, make a trial cut, calculate the adjustment are reground on the cartridge. If the chamfers are not ground, the cartridge will
needed, remove the outer cartridge, and grind off one-half of the difference not seat properly in the pocket; thus the tool will not cut the correct diameter.
obtained by the calculation of the cut diameter to the required diameter.
INDEXABLE
DRILLS
HTS Pilot Drill Repointing Data

COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
AS3 grade A30 grade

INSERTS
included primary relief chisel primary gash web gash

TECHNICAL DATA
catalog number grade angle A angle B angle C relief D angle E thickness F depth G thickness H
B510S08000 AS3 118° 8° + 2° 55° ± 3° .0275 ± .004 20° - 2° .0196 ± .004 .0314 ± .004 .0098 ± .002
B510S10000 AS3 118° 8° + 2° 55° ± 3° .0314 ± .004 20° - 2° .0236 ± .004 .0393 ± .004 .0118 ± .002
B510S15000 AS3 118° 8° + 2° 55° ± 3° .0433 ± .004 20° - 2° .0354 ± .004 .0590 ± .004 .0177 ± .002
B510S20000 AS3 118° 8° + 2° 55° ± 3° .0551 ± .004 20° - 2° .0472 ± .004 .0787 ± .004 .0236 ± .002
B510S25000 AS3 118° 8° + 2° 55° ± 3° .0629 ± .004 20° - 2° .0590 ± .004 .0984 ± .004 .0291 ± .004
B510S30000 AS3 118° 8° + 2° 55° ± 3° .0708 ± .004 20° - 2° .0708 ± .001 .1181 ± .001 .0354 ± .004
INDEX
B510S08000 A30 118° 8° + 2° 55° ± 3° .0275 ± .004

B510S10000 A30 118° 8° + 2° 55° ± 3° .0314 ± .004
B510S15000 A30 118° 8° + 2° 55° ± 3° .0433 ± .004
B510S20000 A30 118° 8° + 2° 55° ± 3° .0551 ± .004
B510S25000 A30 118° 8° + 2° 55° ± 3° .0629 ± .004
B510S30000 A30 118° 8° + 2° 55° ± 3° .0708 ± .004
Technical Data
Indexable Drills — HTS Deep-Hole Drilling System — Inch
SOLID CARBIDE
DRILLS
Power: These charts are based on machining Coolant Application: HTS drills must always be applied with
experiences using steels with a hardness of coolant lubricant. The higher the coolant rate, the better the
200-250 HB, and on a cutting speed of 350 sfm. drilling performance.
MODULAR DRILLS
COMBINATION
coolant
F = .008 in./rev.
TOOLS
pressure
horsepower (psi)
F = .004 in./rev.
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
feed force
(lbs.) F = .008 in./rev.
F = .004 in./rev.
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
F = .008 in./rev.
torque
(ft.-.lbs.)
INDEX
F = .004 in./rev.
Technical Data
Indexable Drills — Cutting Forces — HTS-C Series Drills — Metric
SOLID CARBIDE
DRILLS
Drive power Minimum coolant quantities

→ Drive power Ps [kW]
→ Minimum coolant quantities V. [l/min]
MODULAR DRILLS
8 8
f = 0,15 mm
6 6 favorable range
f = 0,20 mm
4 4
COMBINATION
TOOLS
2 f = 0,10 mm 2 critical range
0 0
0 20 25 30 35 40 45 0 24 30 34 39 45
CARBIDE TAPS
HSS AND
Drill diameter [mm]↑ Drill diameter d1 [mm] ↑

INDEXABLE
Calculating the drive power Coolant usage

DRILLS
The diagram is based on empirical values. Powerful cooling is provided for the
It applies to drilling steels of strength: HTS-C drill tools thanks to an internal
700–900 N/mm2 coolant supply.
The cutting speed taken as a basis is: Recommendation: Emulsion 6–8%
COUNTERBORING
vc = 100 m/min Minimum

coolant pressure: 6 bar
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Combination Tools — Common Formulas and Conversion Tables
SOLID CARBIDE
DRILLS
Basic Formulas Hardness Conversion
to find formula Brinell Rockwell Brinell Rockwell Brinell Rockwell Brinell Rockwell Brinell Rockwell
sfm (d x rpm) / 3.82
HB HRB HRC HB HRB HRC HB HRB HRC HB HRB HRC HB HRB HRC
654 - 60 432 - 46 301 - 32 216 96.0 - 156 82.0 -
rpm (sfm x 3.82) / d 634 - 59 421 - 45 294 - 31 210 95.0 - 153 81.0 -
MODULAR DRILLS
mpm sfm / 3.27
615 - 58 409 - 44 286 - 30 205 94.0 - 150 80.0 -
595 - 57 400 - 43 279 - 29 200 93.0 - 147 79.0 -
sfm mpm / 3.27 577 - 56 390 - 42 271 - 28 195 92.0 - 144 78.0 -
ipr ipm / rpm 560 - 55 381 - 41 264 - 27 190 91.0 - 141 77.0 -
543 - 54 371 - 40 258 - 26 185 90.0 - 139 76.0 -
ipm ipr x rpm
525 - 53 362 - 39 253 - 25 180 89.0 - 137 75.0 -
COMBINATION
TOOLS
mm inch x 25.4 512 - 52 353 - 38 247 - 24 176 88.0 - 135 74.0 -
496 - 51 344 - 37 243 100.0 23 172 87.0 - 132 73.0 -
inches mm / 25.4
481 - 50 336 - 36 237 99.0 22 169 86.0 - 130 72.0 -
cut time loc / ipm (min) 469 - 49 327 - 35 231 98.5 21 165 85.0 - 127 71.0 -
mrr πd2 / 4 (ipm) 455 - 48 319 - 34 228 98.0 20 162 84.0 - 125 70.0 -
CARBIDE TAPS
443 - 47 311 - 33 222 97.0 - 159 83.0 - 123 69.0 -
HSS AND
Abbreviations
sfm = surface feet per minute
rpm = revolutions per minute
mpm = meter per minute
INDEXABLE
DRILLS
ipr = inches per revolution
ipm = inches per minute
d = diameter
mm = millimeters
loc = length of cut
mrr = metal removal rate
COUNTERBORING
TOOLS
Useful Formulas
kW = hp / 1.341022
PRECISION HOLE
HP = kW x 1..341022
FINISHING
kN = lbs / 225
lbs = kN x 2.25
Nm = ft-lbs / .7375621
ft-lbs = Nm x .7375621
1 psi = .068948 bars
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Workpiece Materials Listings — Steel — P1
SOLID CARBIDE
DRILLS
Workpiece Material Conversion Table — P1

P1 Low-Carbon Steels, Long Chipping Content: C < .25% Tensile Strength RM (MPa)*: < 530 Hardness (HB): < 125
For Best Solid Carbide, Modular, and Indexable Drilling Tools, pages A1–A130, B1–B78, E1–E100. For Best Tapping, Boring, and Reaming Solutions, pages D1–D61, F1–F3, G1–G194.
Material AISI** DIN BS JIS UNS EN AFNOR UNI SIS Material AISI** DIN BS JIS UNS EN AFNOR UNI SIS
Number Number
MODULAR DRILLS
1.0044 A 570 St 44-2 4360-43 B SM 41 B K 02502 S 275 JR E 28-2 Fe 430 BFN 1412 1.1135 C 16 E Al /
Gr. 40 Ck 16 Al
1.0123 QSt 37-3 SWRCH 1.1137 C20D2 C 20 D 2 FM 20 C20D 2
12R 1.1139 C26D2 C 26 D 2 FM 26 C26D 2
1.0128 QSt 44-2 1.1141 1015 Ck 15 080 M 15 S 15 C G 10150 2 C 15 XC 15 C 15 1370
1.0133 QSt 44-3 1.1148 C 16 E C 16 E C 16 E XC 18
COMBINATION
TOOLS
1.0135 P St 44-3 1.1149 Cm 22 070 M 20 C 22 R 3 C 22 XC 18 u C 22 R

1.0146 P St 44-2 ( 3 C 22)
1.0176 P St 37-3 1.1151 1023 Ck 22 050 A 20 S 22 C G10230 2 C 22 XC 25 C 20
1.0301 1010 C 10 045 M 10 S 10 C G10100 C 10 XC 10 C 10 1.1152 Cq 22 SWRCH C 21 KD CB 20 FF
1.0310 C10D SWRM C 10 D FM 10 C 10 D 20K
10 1.1176 1038 Ck 38 G 10380 XF 38
CARBIDE TAPS
1.0311 C12D SWRM C 12 D C 12 D H

HSS AND
12 1.1185 C2D1 C2D1 C2D1

1.0352 P 245 G H P 245 GH 1.1301 19 MnVS 6 19 MnVS 6
(Schiffkessel 1.5418 GS-20
Blech) MnMo 53
1.0401 1015 C 15 080 M 15 S 15 C G10170 C 15 C 12 C 15 1350 1.5475 GS-20 MnNb 5
1.0402 1020 C 22 050 A 20 S 22 C G10200 1 C 22 C 20 C 20 1450 1.5485 GS-20
INDEXABLE
DRILLS
1.0407 LSt 45.8 C 16 C 16 MnNiTi 53

1.0413 C15D SWRM C 15 D FM 15 C 15 D 1.5508 1021 22 B 2 SWRCHB G10210 C 22 BE 69 21 B 3
15 220
1.0414 C20D SWRM C 20 D FM 20 C 20 D 1.5523 15B21 19 MnB 4 170 H 20 SWRCHB H15211 19 MnB 4 20 MB 5
20 H 420
COUNTERBORING
1.0415 C26D SWRH C 26 D FM 26 C 26 D 1.6219 G 22 MnNi 5

27 1.6916 GS-12
TOOLS
1.0416 C18D SWRM C 18 D FM 18 C 18 D MnCrNiMo 53

17 1.7353 GS-12 B5
1.0420 GS-38 A1 GE 200 230-400M 1306 CrMo 19 5
1.0425 P 265 GH 151-400 SG 30 K02801 P 265 GH A42CP P 265 GH 1430 1.7387 G 12 CrMo 9 10 S50480
1.0446 GS-45 A1 SC 450 J03001 GE 230 E23-45M 1305 1.7903 GS-18
PRECISION HOLE
1.0453 1018 C16.8 080 A 17 G10180 MnCrMo 63

FINISHING
1.0492 11 Mn 4 Si 1.7906 GS-19

1.0494 11 Mn 4 Al MnCrMo 63
1.0495 21 Mn 5 1.7909 GS-20
1.0496 12 Mn 6 MnCrMo 63
1.087 17 MnV 7 1.8958 S 235 J 0 W S 235 SMA 400 S 235 JO W S 235 J 0 W
1.1101 Alfrig 35 N C1 (Allwesta 360) J 0 W BW
INSERTS
1.1108 10 Mn 4 1.8959 S 355 J 0 W WR 50 B SMA S 235 J0 W E24W-3 S 235 J0 W

1.1109 12 Mn 5 (Allwesta 510) 490 BW
1.1114 C10D2 C 10 D 2 FM 10 C 10 D 2 1.8960 WTSt 37-2 / WR 50 B SMA K11538 S 235 JR W E 24 W-2
1.1117 8 Mn 4 S235JRW 41 A
1.1120 GS-20 Mn 5 SMnC H15220 1.8961 WTSt 37-3 WR 50 C SMA S 235 S 235 J 2 W Fe 360 D FF
420 50 A J2 W
TECHNICAL DATA
1.1121 1010 Ck 10 040 A 10 S 10 C G10100 2 C 10 XC 10 C 10 1265

1.1122 Cq 10 ( C 10 C) SWRCH C 10 KD
10 K
1.1123 7 Mn 6
1.1124 C12D2 C 12 D 2 C 12 D 2
1.1125 7 Mn 7
1.1126 C15D2 C 15 D 2 FM 15 C 15 D 2
INDEX
1.1129 C 18D2 C 18 D 2 FM 18 C 18 D 2
1.1131 GS-16 Mn 5 G 17 Mn 5 G 17 Mn 5 G17Mn5
1.1132 Cq 15 SWRCH C 15 KD
15K
1.1134 Ck 19 ( C 19 E)
* 1 Mpa = 145 psi. ** Includes ASTM and SAE material specifications.
AISI — American Iron and Steel Institute BS — British Standards SAE — Society of Automotive Engineers
AFNOR — French National Organization for Standardization DIN — German Institute for Standardization SIS — Swedish Standards Institute
AMS — Aerospace Material Specifications EN — European Standards UNI — Italian Organization for Standardization
ASTM — American Society of Mechanical Engineers JIS — Japanese Industrial Standards UNS — Unified Numbering System
Technical Data
SOLID CARBIDE
DRILLS
P2 Low-Carbon Steels, Free Machining, and Short Chipping Content: C < .25% Tensile Strength RM (MPa)*: < 650 Hardness (HB): < 220
Number Number
MODULAR DRILLS
1.0030 St 00 1.0338 St 4 DC 04 / SPCE Fe P04 Fe 14 DC04/
1.0034 R St 34-2/ 34/20CR K02502 FeP04 FeP04
S 205 G2T 1.0340 M2
1.0035 St 33 HR 15 SS 330 K01400 A 33 Fe 320 (ArmcoEisen)
1.0036 A 570 USt 37-2 4360- SS 34 K 02502 S 235 JR G1 E 24-2 Fe 360 BFU 1311 1.0341 St S ch St r
Gr. 33 40 B 1.0343 D 20 EK
COMBINATION
TOOLS
1.0037 St 37-2 HS 37/23 STKR 400 K02702 S 235 JR E 28-2 Fe 430 C 1412 1.0344 DC01Cu DC 01 Cu
1.0038 A 570 R St 37-2/ 4260-40 C SS 34 K 02502 S235 JR G 2 E 24-2 NE Fe 360 BFN 1312 1.0346 A St 35 K02202
Gr. 36 S235 JRG2 1.0347 RR St 3 CR 3 SPCD Fe P03 F 13 DC 03 /
1.0040 USt 42-2 SS 41 HS 18-0-2-10 FeP 03
1.0055 1013 USt 34-1 G10130 1233 1.0348 U H I / P 195GH SGV 480 P 195 Gh
1.0057 R St 34-1 1.0349 ZStE 250 i
CARBIDE TAPS
1.0065 USt 37-1 1.0353 St 13 Cu 3
HSS AND
1.0067 R St 37-1 1.0354 St 14 Cu 3 DC 04 Cu
1.0075 USt 42-1 1.0355 Fe P 05 G
1.0077 R St 42-1 K02507 1.0358 St 05 Z
1.0159 ZSt 37-2 1.0359 RR St 23
1.0161 S235J2G3/ S 235 K01501 S 235 J2 G3 E 24-4 S 235 J2G3 1313 1.0361 VH 280-50
Fe 360 D1 J2G3 1.0362 VH 370-50
INDEXABLE
DRILLS
1.0165 RZSt 37-2 1.0363 VH 430-50
1.0167 R St 37-2 Cu3 S 235 JRG 1.0364 VH 330-65
Cu 2 1.0365 VH 420-65
1.0171 S 235 J 2 S 235 J 2 1.0366 VH 500-65
G 3 CuC G 3 Cu C 1.0367 400-100
COUNTERBORING
1.0201 USt 36-1 TF 180
1.0209 St 35-3 1.0369 VH 1100-65
TOOLS
1.0216 USt 38-1 1.0370
1.0218 R St 41-2 1.0371 T 50
1.0302 C 10 Pb C 10 GPb 1.0372 T 52
1.0303 QSt 32-3 SWR CB 4 FF KD CB 4 F U 1.0373 DR 550
CH6R 1.0374 DR 620
PRECISION HOLE
1.0305 St 35.8 STPT 38 K01201 1.0375 T 57
FINISHING
1.0306 Fe P 06 G 1.0376 DR 660
1.0307 StE 210.7 Fe 34 1.0377 T 61
1.0312 R St 15 FeP05 Fe P05 FeP05 FeP05 1.0378 T 65
1.0314 D 6-2 0 1 5 A 03 SWRM 6 G10050 C 4 D 3 CD 5 1.0379 TH 55
1.0315 St 37.8 STB 35 Fe 37 1.0380
1.0320 St 22 F d 2 / C 08 RR 1.0382 T 580
INSERTS
1.0321 USt 23 1.0383 T 690
1.0322 USD 8 1.0389 DD 14 1 CR DD 14 DD 14
1.0325 R R SD 8 1.0390 DC 01 EK
1.0326 R St 28 / 180 G 2 T 1.0391 DC 12 EK
180G2T 1.0392 DC 04 EK
1.0327 St 24 Fd 4 / 1.0393 DC 13 ED
TECHNICAL DATA
C 05 RR 1.0394 DC 04 ED
1.0330 St 12 DC 01 / SPCC Fe P01 DC 01 / fe P01 DC 01 / 1.0395 ZStE 180 BH
Fe P01 FeP0 1 1.0396 ZStE 220 BH
1.0331 Ro St 2 DC 01 GT 1.0397 ZStE 220 P
1.0332 1008 DD 11 HR 3 SPHD DD 11 1C 1.0398 3 CR D D 12 D D 12
( StW 22) 1.0399 DC 03 ED
1.0333 St 13 CR 3 SPCD 1.0400 ZStE 260 BH
INDEX
1.0334 USt W 23 SPHE DD 12 G 1 1.0403 C 15 Pb / C 15 GPb

1.0335 D D 13 SPHE D D 13 3C C15GPb
( StW 24) HS3 1.0404 C 22 Pb C 22 GPb
1.0336 USt 4 / DC 04 G D C 04 G 1 1.0410 H-40
1.0337 Ro St 4 / DC 04 GT 1.0417 ZStE 260 P
DC 04 GT
Technical Data
SOLID CARBIDE
DRILLS

P2 Low-Carbon Steels, Free Machining, and Short Chipping Content: C < .25% Tensile Strength RM (MPa)*: < 650 Hardness (HB): < 220
Number Number
MODULAR DRILLS
1.0419 RSt 44-2 440 G10160 1.0739 11 SMnPbBi 37

1.0423 P265 NB SG 295 P 265 NB BS 2 1.0753 15 SPb 20 / 15 SPb 22
1.0424 1513 P265 HR 40/30 G15130 12 M 5 15 SPb 22
1.0427 C 22.3 C 22 G 1 1.0754 22 SPb 20
1.0428 BSt 420 S Fe B 400 1.0764 36 SMn 14 36SMn14 36SMn14 36SMn14
COMBINATION
1.0432 C 21 SFVC 1 K03504 P 305 GH 1.0877 C2

TOOLS
1.0439 1012 B 500 H S 12 C G10120 B 500 B XC 12 B 500 B 1332 1.0878 C5

1.0447 H IV L / 1.1133 1022 20 Mn 5 120 M 19 SMn 420 G 10220 20 Mn 5 20 M 5 G 22 Mn 3
Z St E 280 i 1.1142 GC 16 E / GC 16 E
1.0464 BSt 500 G B 500 G 1 GS-Ck 16
1.0465 BSt 500 P B 500 G 2 1.1177 Ck 38 Pb 25 Mn 4
( BSt 500 G2) 1.5506 17 MnB 3 Sep-00
CARBIDE TAPS
HSS AND
1.0466 BSt 500 M B 500 G 3 1.6220 G 20 Mn 5 G 20 Mn 5 G 20 Mn 5

(BSt500 G 3) 1.7015 5015 15 Cr 3 523 M15 SCr 415 G50150 15 Cr 2 12 C 3
1.0467 C 14 / 15 Mn 3 N08020 H
1.0475 Schiffbaustahl K02104 1.7016 5117 17 Cr 3 17 Cr 3 G51170 (15 Cr 2 KD) 18 C 3
GL-D(S 235 J 2 1.7211 4118 23 CrMoB 4 SCM 21 G41180 20 MoCr 4
1.0476 Schiffbaustahl K01801 H
GL-E(S 235 J 4 1.8970 StE 385.7
INDEXABLE
DRILLS
1.0478 P285 QH P 285 QH 1.8971 StE 385.7 TM

1.0498 St 42.8 STPT 42 Fe 42
1.0525 33 Mn 6
1.0643 70 Mn3
1.0660 St 140/160
COUNTERBORING
1.0662 St 150/170
1.0664 St 160/180
TOOLS
1.0702 1110 U 10 S 10 SUM 12 G11100

1.0703 R 10 S 10 / C 10 RG 2
C 10 RG 2
1.0706 U 10 S 6
1.0708 C 7 RG 1
PRECISION HOLE
1.0709 R7S6/ C 7 RG 2
FINISHING
C 7 RG 2
1.0710 15 S 10 /
15 S 20
1.0711 B 220 M 07 SUM 21 G 11120 CF 9 S 22
1112
9 S 20
INSERTS
1.0715 1213 9 SMn 28 / 230 M 07 SUM 22 G 12130 11 SMn 28 S 250 CF 9 1912

11 SMn 30 SMn 28
1.0718 12L13 9 SMnPb 28 SUM G 12134 11 S 250 Pb CF 9 1914
22 L SMnPb 28 SMnPb 28
1.0719 11
TECHNICAL DATA
30 HD
1.0720 11 SMnPbBiTe
30
1.0721 1108 10 S 20 210 M 15 G 11080 10 S 20 10 F 1 CF 10 S 20
1.0722 11L08 10 SPb 20 G 11084 10 SPb 20 10 Pb F 2 CF 10
SPb 20
1.0723 15 S 22 / En32M SUM 32 15 S 22 1922
15 S 20
INDEX
1.0725 15 SMn 13 15 SMn 13 15 SMn 13 15 SMn 13

1.0736 1215 9 SMn 36 / 240 M 07 SUM 25 G 12150 11 SMn 37 S 300 CF 9
11 S Mn 37 SMn 36
1.0737 12L14 9 SMnPb 36 / G 12144 11 SMnPb S 300 Pb CF 9 1926
11 SMnPb 37 37 SMnPb 36
1.0738 11 SMnPbTe 37 11 SMn 37 11 SMn 37
Technical Data
SOLID CARBIDE
DRILLS
P3 Medium to High Plain-Carbon Steels and Alloy Steels Content: C > .25% Tensile Strength RM (MPa)*: 600-850 Hardness (HB): < 330
Number Number
MODULAR DRILLS
1.0045 F 2172 En 50 B SM 490 S 1207 E36-2 Fe 510 BFN 1.0422 R 0550
YA 1.0426 P310 NB 224-410 SG 325 K02100 P280GH BS 2 P 275 N 2103
1.0050 A 570 St 50-2 4360-50 B SS 50 E 295 A 50-2 Fe 490 2172 1.0429 L 290 MB L290MB L 290 MB
Gr. 50 1.0430 St E 320.7 TM
1.0052 St 50-1 1.0431 B St 42/50 RK
COMBINATION
1.0060 St 60-2 4360-55 E SM 58 E 335 A 60-2 Fe 60-2 1650 1.0433 B St 42 / 50 RU
TOOLS
1.0062 St 60-1 1.0434
1.0114 S 235 JO/ Fe En 40C S 235 JO E24-3 Fe 360 CFN 1.0435 H III / P285NH Sm 38 P 285 NH
360 C 1.0436 P310 NB 224-430 SG 325 K02100 P305GH P 275 N P 275 N 2103
1.0116 A 570 St 37-3 4360-40 C K01501 S 235 J2 G3 Fe 360 D1(2); Fe 360 1312 1.0437 A St 41 P 275 N STK 400 K02100 S 275 N BS 3 P 275 N 2103
Gr. 36 E 24-3 D1(2) 1.0438 B 500 A SD 490 B 500 A B 500 A
1.0123 QSt 37-3 SWRCH 1.0440 1044 GL-A
CARBIDE TAPS
HSS AND
12R 1.0441 Schiffbaustahl
1.0128 QSt 44-2 GL-A
1.0129 ZSt 44-2 1.0442 Schiffbaustahl
1.0133 QSt 44-3 GL-B(S 235 J 0
1.0135 P St 44-3 1.0443 GS-45 SC 450
1.0136 St 42-3 1.0444 ZStE 300 BH
1.0140 S 275 J0C 1.0445 H IV / P295NH SG 37 K03102 Fe 460-2
INDEXABLE
DRILLS
1.0141 S 275 J2 G3C KW
1.0142 S 275 J2 G4C 1.0448 ZStE 300 P /
1.0143 S 275 J0 En43C; S 275 J0/ S 275 J0; S275J0; H 300 P
S275J0 Fe 430 C E 28-3 Fe430CFN 1.0457 StE 240.7 L 245 NB L 245 NB
1.0144 A 573 St 44-3 4360-43 C SM 41 B S 275 J2 Fe 430 D1(2); Fe 430 D FF 1414 1.0458 HIII / L 235 GA L 235 GA
COUNTERBORING
Gr. 70 G3 (4) E 28-4 1.0459 L 245 GA / L 245 GA TS E 250
1.0145 S 275 J2 G4/ S 275 J2 S 275 J2 E28-4;S 275 S 275 J2 1414 RRStE 240.7
TOOLS
Fe 430 D 2 G4 G4 J2 G4 G4 1.0460 C 22 8 P 250 GH
1.0146 P St 44-2 1.0461 St E255 K01800
1.0149 Ro St 44-2 43C S 275 J0 H S 275 J0 H 1.0462 WStE 255 K01800
1.0153 ZSt 44-3 1.0463 TStE 255 K11535
1.0168 ZSt 37-3 1.0468 15 Mn 3 Al C 14 GAl
PRECISION HOLE
1.0176 P St 37-3 1.0469 21 Mn 4 20 Mn 4
FINISHING
1.0179 S 275 JR Cu 1.0470 21Mn4Al
1.0219 St 41-3 1.0473 19 Mn 6 / P 355 GH SGV 46 K03300 P355GH A 52 CP Fe E355-2 2101
1.0254 St 37.0 STPG 38 P 235 T1 P 355 GH
1.0300 C4D C4D FM 5 C4D 1.0474 Schiffbaustahl
1.0304 C9D SWRM 8 C9D FM 9 C9D GL-D (S 235 J)
1.0308 St 37-2 360.0000 STKM K02504 S 235 JR E 24-2 Fe 360 1412 1.0479 13 Mn 6
INSERTS
12 A 1.0480 H 260 / ZSt H 240 LA H 240 LA E 240 C
1.0313 C7D C7D SWRM 8 G10060 C 7 D FM 8 C7D E 260
1.0319 L 210 GA L 210 GA TS E 220 1.0481 17 Mn 4 / 224-460B SG 37 K03501 P 295 GH A 48 CP Fe E 295 2102
class 2 P 295 GH
1.0323 USD 7 / C 8 C8G1W 1.0482 19 Mn 5 224-460 SG 37 K 03102 A 52 CP; AP; Fe460-
TECHNICAL DATA
G1 W FP 2 KW
1.0324 RSD 7 / C8G2W C8G2W 1.0483 L 290 AG L290GA TS E 290
1.0339 RSD 10 Si / C 10 W Si 1.0484 L 290 NB L290NB L 290 NB
C10WSi 1.0485 21 Mn 6 K12320
1.0345 P235 GH P 235 GH SPV 50 K02503 P 235 GH A 37 CP Fe E 235 1330 1.0486 St E 285 P 275 N SM 41 A K 01802 P 275 N P 275 N Fe E 285 KG
1.0351 RRSD 10 / C 10 W 1.0487 W St E 285 P 275 N K 01802 P 275 NH P 275 N Fe E 285 KW
C10 W 1.0488 T St E 285 P 275 NL 1 SLA 235 AK 01803 P 275 NL 1 P 275 NL 1 Fe E 285 KT
1.0405 St 45.8 STB 410 K02727 1.0489 H 300 / ZSt E H280LA H 280 LA E 280 C
INDEX
1.0406 1025 C 25 070 M 26 S 22 C G10250 1 C 25 C 25 C 25 300

1.0409 St E 320.7 1.0492 11 Mn 4 Si
1.0411 C 25 Pb C 25 GPb 1.0493 S 275 NH S 275 NH S 275 NH S 275 NH
1.0412 27 MnSi 5 1.0494 11 Mn 4 Al
1.0418 L 245 MB 430.0000 K03006 L 245 MB L 245 MB 1.0495 21 Mn 5
1.0421 St 52.0 STPG 42 1.0496 12 Mn 6
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
1.0497 S 275 NLH S275NLH S 275 NLH S275NLH 1.0560 GL-E - 40 S 390 G 3 S
1.0499 L 360 GA L 360 GA ( S 390 G 3 S)
1.0501 1035 C 35 060 A 35 S 35 C G 10350 1 C 35 CC 35 C 35 1550 1.0561 1037 36 Mn4 170 H 36 G10370
1.0502 C 35 Pb / C 35 Pb 1.0562 A 633 St E 355 P 355 N SM 50 YB K12000 P 355 N E 355 R/FP Fe E 355 KG 2132
C 35 GPb Gr. C
COMBINATION
1.0503 1045 C 45 080 M 46 S 45 C G 10450 1 C 45 CC 45 C 45 1650 1.0564 N 80

TOOLS
1.0505 St E 315 / SM 50 A K11506 P 315 N Fe E 315 KG 1.0565 W St E 355 P 355 NH K01600 P 355 NH P 355 NH Fe E 355 KW
P 315N 1.0566 T St E355 P 355 NL1 SLA 37 P 355 NL1 P 355 NL1 Fe E 355 KT
1.0506 W St E 315 SNC 1 K02404 P 315 NH Fe E 315 KW 2107 1.0567 32 Mn 3
1.0507 St 55 STKM Fe 540 1.0570 St 52-3 4360-50 B SM 50 YB S 355 J 2 G 3 E 36-3 Fe 510 B 2132
16A 1.0571 P355 QH1 P 355 QH P 355 QH P 355 QH
1.0508 T St E315 SLA 325 A K02404 P 315 NL 2106 1.0572 PSt 52-3 S 355 J2 G3 F FE
CARBIDE TAPS
HSS AND
1.0509 S 355 K2 G3 Cu (S 355 J2 G3 F) 510 C

/ (St 55.4) 1.0573 QSt 52-3
1.0510 32 Mn 4 (S355J2G3C)
1.0511 1040 C 40 080 M 40 S 40 C G 10 400 1 C 40 C 40 C 40 1.0574 ZStE 460 /
1.0512 C 40 Pb C 40 G Pb H 460
1.0516 C38D SWRH 37 C 38 D FM 38 C 38 D 1.0577 S 355 J 2 G 4 S 355 J 2 S 355 J 2 S 355 J 2 G 4 S 355 J 2
1.0517 C48D SWRH 48 C 48 D FM 48 C 48 D G4 G4 G4
INDEXABLE
DRILLS
1.0518 C56D C 56 D FM 56 C 56 D 1.0578 L 360 MB L 360 MB L 360 MB

1.0519 1046 S 355 K 2 G 4 G10460 S 355 K2 G4 1.0580 St 52 CFS5
Cu Cu 1.0581 St 52.4 STS 49
1.0520 31 Mn 4 1.0582 L 360 NB / L360NB L 360 NB
1.0521 StSch 700 R 0700 StE 360.7
COUNTERBORING
( R 0 700) 1.0585 S 355 J 2 G 3 S 355 J2 G3

1.0524 StSch800 R 0800 Cu/St 52-3 Cu3 Cu + CR
TOOLS
( R 0 800) 1.0586 C50D C 50 D FM 50 C 50 D

1.0526 Cf 45 Pb C 46 1.0587 QSt 52-3 Cu 3 S 355 J2 G3
1.0527 C 56 C 56 Cu C
1.0528 1030 C30 080 M 30 SUP 7 G 10 300 1 C 30 C C 32 C 30 1.0588 D 53-2 SWRH 52 C 52 D FM 52 C 52 D
1.0530 C32D SWRH 32 K02701 C 32 D FM 32 C 32 D B
PRECISION HOLE
1.0532 GL-A 40 S 390 G 1 S 1.0591 FStE 355 OS 3 K12000 S 355 G03

FINISHING
( S 390 G 1 S ) / S355G03
1.0535 1055 C 55 070 M 55 S 55 C J05000 1 C 55 C 55 C 55 1655 1.0592 S 355 J 2 G 4 S 355 J2 G4
1.0539 S 355 NH S 355 NH S 355 NH S 355 NH Cu Cu
1.0540 1050 C 50 080 M 50 S 50 C G 10 500 1 C 50 C 50 C 50 1674 1.0593 S 355 K2 G3 C
1.0541 C42D SWRH C 42 D FM 42 C 42 D 1.0594 S 355 K2 G4 C
42 B 1.0595 S355k2G3 / S 355 K 2 SM 520 K02505 S 355 K 2 E36-4 S 355 K 2
INSERTS
1.0542 1551 C 50 Pb G15510 C 50 G Pb Fe 510 DD1 G3 C G3 G3

1.0544 Schienen 60 F R 0600 (MULTIST
(R 0600/St 1.0596 S355K2G4 / S 355 K 2 S 355 K 2 S 355 K 2 S 355 K 2
Sch 60 Fe 510 DD 2 G4 G4 G4 G4
1.0547 S 355 JO H 50 C S 355 J0 H S 355 J0 H (MULTIS
TECHNICAL DATA
1.0548 ZStE 340/ H 340 H 320 L A H 320 LA E 315 C 1.0597 ZSt 52-3
1.0549 S 335 NLH 50 EE S 355 N LH S 355 N L H 1.0598 C 30 Pb C 3 0 GPb
1.0550 ZStE 380 / H 380 H 360 L A H 360 LA E 355 C 1.0601 1060 C 60 080 A 62 S 60 C- G 10600 1 C 60 AF 70 C 55 C 60
1.0551 S 355 J R C CSP
1.0552 GS-52 A2 GE 260 1.0602 C 60 Pb C 60 GPb
1.0553 S 355 JO En 50 C; S SM 520 S 355 J0 S 355 J0; E S 355 J0; 1.0605 1074 C 75 CS 80 G10740 1 CS 75 C 75 C 75
355 J0 M 36-3 Fe 510 C FN 1.0606 C 67 GPb / C 67 GPb
1.0554 GS-70 50 C S 355 JO C E 36-3 Fe 510 C C 67 Pb
INDEX
1.0555 GS-62 S 355 GO 1 1.0607 C 75 GPb / C 75 GPb

1.0556 ZStE 420 / H 420 46/40HR, H 400 LA H 400 LA C 75 Pb
HS,CS 1.0609 1059 C58D S 58 C G10590 C 58 D FM 58 C 58 D
1.0557 P355 NB SG 365 P 355 NB BS 4 1.0610 C60D C 60 D FM 60 C 60 D
1.0558 GS-60 A3 GE 300 320-560M C 45 1606 1.0611 C62D SWRH 62 B C 62 D FM 62 C 62 D
1.0559 GS-62.3 S 355 GO 2 1.0612 C66D C 66 D FM 66 C 66 D
Technical Data
SOLID CARBIDE
DRILLS
MODULAR DRILLS
Number Number
1.0613 C68D SWRH 67 B C 68 D FM 68 C 68 D 1.0971 QSt E 260 N 7 S AE 275 NC S 260 NC S 260 NCX
1.0614 1075 C76D G10750 C 76 D FM 76 C 76 D 260 NC
1.0615 C70D C 70 D FM 70 C 70 D 1.0972 S 315 QSt E 300 TM / 43 F35 HR, S 315 MC E 315 D MC
1.0616 1080 C86D CS 80 G10860 C 86 D FM 86 C 86 D S 315 MC HS, CS
1.0617 C72D SWRH 72 B C 72 D FM 72 C 72 D 1.0973 QSt E 300 N 7/ AE 340 S 315 NC S 315 NC
COMBINATION
1.0618 1095 C92D 95 CS G10950 C 92 D C 92 D S 315 NC NC
TOOLS
1.0619 GS-C 25 SCPH 1 GP 240 GH GP 240 GH GP 240 Gh 1.0974 QSt E340 TM HR 40/30 S 340 MC E 335 D
1.0620 1078 C78D SWRH 77 B G10780 C 78 D FM 78 C 78 D 1.0975 QSt E340 N S 340 NC Fe E 355 TD
1.0621 GP 240 GR GP 240 GR GP 240 GR GP 240 GR 1.0976 QSt E 360TM S 355 MC E 355 D Fe E 355 TM
1.0622 C80D C 80 D FM 80 C 80 D 1.0977 QSt E360 N S 355 NC Fe E 355 TD
1.0623 StSch 900 A R 0900 1.0978 QSt E380 TM S 380 MC E 390 D
(R 0900) 1.0979 QSt E380 N S 380 NC Fe E 380 TD
CARBIDE TAPS
HSS AND
1.0624 StSch 900 B R 0900 Mn 1.0980 QSt E420 TM HR 50 F 45 S 420 MC E 430 D Fe E 420 TM
(R 0900 Mn) 1.0981 QSt E 420 N S 420 NC Fe E 420 TD
1.0625 1345 StSch 90 C / G13450 GP 280 GH GP 280 GH GP 280 GH 1.0982 QSt E 460 TM 50/45 HR S 460 MC E 445 D
GP 280 GH 1.0983 QSt E 460 N S 460 NC Fe E 460 TD
1.0626 C82D SWRH C 82 D FM 82 C 82 D 1.0984 QSt E500 TM S 500 MC E 490 D Fe E 490 TM 2662
82 B 1.0985 QSt E500 N S 500 NC
1.0628 C88D C 88 D C 88 D 1.0986 QSt E550 TM 60/55 HS S 550 MC E 560 D Fe E 560 TM
INDEXABLE
DRILLS
1.0631 StSch 1200 R 1200 1.0987 QSt E550 N S 550 NC
(R 1200) 1.1008 Ck 8
1.0633 ZSt 70-2 1.1009 C 7 K / Ck 7
1.0724 22 S 20 / 22 S 20 F 2 1.1010 C 5 E / Ck 5
20 1.1102 FStE 355 OS 3 S 355 G04
COUNTERBORING
1.0726 1140 35 S 20 212 M 36 G 11400 35 S 20 35 MF 4 1957 / S355G04
TOOLS
1.0727 1146 45 S 20 212 M 44 G 11460 45 S 20 45 MF 4 1973 1.1103 EStE 255
1.0728 1151 60 S 20 G11510 60 S 20 60 MF 4 1.1104 EStE 285 P 275 NL 2 STK 400 P 275 NL 2 P 275 NL 2 P 275 NL 2
1.0729 70 S 20 1.1105 EStE 315 S 315 NL 1
1.0756 35 SPb 20 35 SPb 20 35 SPb 20 35 SPb 20 1.1106 EStE 355 P 355 NL 2 STK 500 P 355 NL 2 P 355 NL 2 P 355 NL 2
1.0757 45 SPb 20 46 SPb 20 1.1110 C3D2 C3D2 FM 5 C3D2
1.0758 60 SPb 20 1.1111 C5D2 C5D2 FM 6 C5D2
PRECISION HOLE
FINISHING
1.0759 70 SPb 20 1.1112 USD 5 / C 8 E1 C8E1W
1.0760 38 SMn 28 38 SMn 28 38 SMn 28 38 SMn 28 W
1.0761 38 SMnPb 28 38 SMnPb 38 SMnPb 38 SMnPb 1.1113 C8D2 C8D2 FM 8 C8D2
28 28 28 1.1115 C 10 E W / RSD C 10 EW
1.0762 44 SMn 28 44 SMn 28 44 SMn 28 44 SMn 28 11
1.0763 44 SMnPb 28 44 SMnPb 44 SMnPb 44 SMnPb 28 1.1116 USD 6 / C 8 E2 C8E2W
28 28 W
INSERTS
1.0765 36 SMnPb 14 36 SMnPb 36 SMnPb 36 SMnPb 1.1117 8 Mn 4
14 14 14 1.1123 7 Mn 6
1.0870 17 MnV 7 1.1125 7 Mn 7
1.0871 28 MnB 5 1.1127 1141 36 Mn 6 212 M 36 S Mn 443 G 11410
1.0900 38 Si 6 1.1128 1548 46 Mn 5 G15480
TECHNICAL DATA
1.0901 38 Si 2 1.1135 C 16 E Al /
1.0902 46 Si 7 45 S 7 Ck 16 Al
1.0903 9255 51 Si 7 250 A 53 G92550 51 S 7 48 Si 7 2090 1.1136 G 24 Mn 4 / G 24 Mn 4
1.0904 9255 55 Si 7 250 A 53 SKH 1; G92550 55 NiCrMoV 755 S 7 55 Si 8 2085 GS 24 Mn 4
SKT 4 1.1140 C 15 R C 15 R C 15 R C 15 R
1.0905 38 Si 3 1.1143 C32D2 C 32 D 2 FM 32 C 32 D 2
1.0908 60 SiMn 5 1.1145 C36D2 C 36 D 2 FM 36 C 36 D 2
1.0915 StSch 1100 R 1100 Cr 1.1146 1033 30Mn4 G10330
INDEX
(R 1100 Cr) 1.1150 C38D2 C 38 D 2 FM 38 C 38 D 2

1.0961 9262 60 SiCr 7 250 A 61 SUP 7 G92620 60 SiCr 8 60 SC 7 60 SiCr 8 1.1153 C40D2 C 40 D 2 FM 40 C 40 D 2
1.0966 QSt E 690 TM S 700 MC S 690 MC S 700 MC 1.1154 C42D2 C 42 D 2 FM 42 C 42 D 2
(S 700 MC) 1.1157 1039 40 Mn 4 150 M 36 G10390 35 M 5
1.0970 QSt E 260 TM / S 260 MC 41 S 7 Fe E 275 1.1158 1025 Ck 25 070 M 26 S 25 C G10250 2 C 25 XC 25 C 25
5260 MC TM 1.1160 1524 22 Mn 6 SS 41 G15240
* 1 Mpa = 145 psi. ** Includes ASTM and SAE material specifications. 1.116 1524 22 Mn 6 SS 41 G15240
Technical Data
SOLID CARBIDE
DRILLS

MODULAR DRILLS
Number Number
1.1161 1526 26 Mn 5 G15260 1.1219 Cf 54

1.1161 1526 26 Mn 5 G15260 1.1220 C56D2 / D 55-2 C 56 D 2 FM 56 C 56 D 2
1.1162 C46D2 C 46 D 2 FM 46 C46D 2 1.1221 1060 Ck 60 060 A 62 S 58 C G 10640 2 C 60 XC 60 C 60 1678
1.1163 C 25 R C 25 R C 25 R C 25 R C 25 R 1.1222 C62D2 C 62 D 2 FM 62 C 62 D 2
1.1164 C48D2 C 48 D 2 FM 48 C48 D 2 1.1223 Cm 60 C 60 R 3 C 60 C 60 R C 60 R
COMBINATION
1.1165 1330 GS-30 Mn 5 120 M 36 SMn 433 K13300 35 M 5 1330 1.1225 Cm 60 Pb

TOOLS
H; SCMn 1.1226 1552 52 Mn 5 G15520

2 1.1227 Ck 60 Pb
1.1166 1536 34 Mn 5 En15B SS 55 G15360 1.1228 C60D2 C 60 D 2 FM 60 C 60 D 2
1.1166 1536 34 Mn 5 En15B SS 55 G15360 1.1229 Cf 70 Pb
1.1167 1335 36 Mn 5 150 M 36 SMn 438 G13350 40 M 5 2120 1.1230 1065 FD 095 A 65 G10650 C 68 D
(H) (Federstahldraht)
CARBIDE TAPS
HSS AND
1.1168 G 40 Mn 5 / G 40 Mn 5 1.1231 1070 Ck 67 060 A 67 S 70 C- G 10700 C 67 S XC 68 C 70 1770

GS 40 Mn 5 CSP
1.1169 20 Mn 6 150 M 19 20 M 5 20 Mn 6 1.1232 C68D2 C 68 D 2 FM 68 C 68 D 2
1.1170 1330 28 Mn 6 150 M 28 SCMn 1 G 13300 28 Mn 6 35 M 5 C 28 Mn 1.1233 56 Mn 4
1.1171 C50D2 C 50 D 2 FM 50 C50D 2 1.1234 1069 Ck 68 G10690 C 70 D
1.1172 1030 Cq 35 F.1133 G 10300 C 35 KD CB 35 1.1235 37 Mn 6
(C 35 DF) 1.1236 C66D2 C 66 D 2 FM 66 C 66 D 2
INDEXABLE
DRILLS
1.1173 1034 Ck 34 080 M 34 S 34 C G 10340 2 C 34 C 34 1.1237 C 70 D 3 / SKD

1.1177 Ck 38 Pb 25 Mn 4 70
1.1178 1030 Ck 30 080 M 30 S 30 C G 10300 2 C 30 XC 32 C 30 1.1238 C 80 D 3 / SKD
1.1179 C 30 R C 30 R C 30 R C 30 R C 30 R C 30 R 80
(3 C 30) 1.1240 65 Mn 4
COUNTERBORING
1.1180 1035 Cm 35 080 M 36 G 10350 3 C 35 38 H1 k C 35 R 1572- 1.1241 C50R C 50 R C 50 R FM 50 C 50 R

TOOLS
03 1.1242 C72D2 C 72 D 2 FM 72 C 72 D 2
1.1181 1034 Ck 35 080 M 36 S 35 C G 10340 2 C 35 XC 38 H1 C 35 1572 1.1244 70 Mn 4
1.1182 Ck 35 Pb S 355 G 13 1.1245 Ck 75 Pb
1.1183 1035 Cf 35 060 A 35 S 35 C G 10350 C 35 G XC 38 TS C 35 1572 1.1248 1080 Ck 75 060 A 78 C 75 G 10800 C 75 S XC 75 C 75 1774
1.1184 Ck 36 S 355 G 14 1.1249 1070 Cf 70 G 10700 C 70 G XC 70
1.1186 1040 Ck 40 080 A 40 S 40 C G 10400 2 C 40 XC 42 H1 C 40 1.1250 VD K06700
PRECISION HOLE
FINISHING
1.1187 C3D1 C3D1 C3D1 (Federstahldraht)

1.1188 C4D1 C4D1 1.1251 C70D2 C 70 D 2 FM 70 C 70 D 2
1.1189 C40R / Cm 40 C 40 R C 40 R C 40 R C 40 1.1252 C78D2 C 78 D 2 FM 78 C 78 D 2
1.1190 C 42 E Al / Ck S 355 G15 1.1253 C76D2 C 76 D 2 FM 76 C 76 D 2
42 Al 1.1255 C80D2 C 80 D 2 FM 80 C 80 D 2
1.1191 1045 Ck 45 080 M 46 S 45 C G10450 2 C 45 XC 42 C 40 1672 1.1256 VD 66-3
1.1192 1045 Cq 45 SWRCH G10450 C 45 KD 1.1257 VD 71-3
INSERTS
45K 1.1259 80 Mn 4
1.1193 1045 Cf 45 060 A 47 S 45 C G10450 C 45 G XC 42 TS C 43 1672 1.1260 1566 66 Mn 4 G15660
1.1195 C 45 Epb / Ck 1.1262 C82D2 C 82 D 2 FM 82 C 82 D 2
45 Pb 1.1265 C86D2 C 86 D 2 FM 86 C 86 D 2
1.1198 C 48 Emn / Ck 1.1267 Ck 85 Pb
TECHNICAL DATA
48 Mn 1.1269 1090 Ck 85 SK 5 - G 10900 C 85 S XC 90 C 90

1.1201 1045 Cm 45 080 M 46 S 50 C G10450 3 C 45 XC 48 H1u C 45 R 1672 CSP
1.1202 C52D2 C 52 D 2 FM 52 C 52 D 2 1.1272 C88D2 C 88 D 2 C 88 D 2
1.1203 1055 Ck 55 070 M 55 S 55 C G10550 2 C 55 XC 55 H1 C 55 1655 1.1273 1085 90 Mn 4 080 A 83 SUP4 G 10850
1.1205 C 53 R / Cm 53 C 53 R 1.1274 1095 Ck 101 060 A 96 SUP_4 G 10950 C 100 S XC 100 C 100 1870
1.1206 1050 Ck 50 080 M 50 S 50 C G10500 2 C 50 XC 48 H1 C 50 1674. 1.1282 C92D2 C 92 D 2 C 92 D 2
1.1207 C 10 R C 10 R C 10 R C 10 R 1.1283 C98D2 C 98 D 2 C 98 D 2
1.1208 C 16 R C 16 R C 16 R C 16 R 1.1304 46 MnVS 6 46 MnVS 6
INDEX
1.1209 1055 Cm 55 070 M 55 G 10550 3 C 55 XC 55 H1 C 55 R 1.1305 46 MnVS 3 46 MnVS 3

1.1210 1053 Ck 53 En43C S 53 C G 10530 1.1331 WSt E 255 S
1.1212 C58D2 C 58 D 2 FM 58 C 58 D 2 1.1333 WSt E 285 S
1.1213 1050 Cf 53 060 A 57 S 50 C G 10500 C 53 G XC 48 TS C 48 1674 1.1335 WSt E315 S
1.1215 Cf 53 Pb C 53 1.1337 WSt E 355
1.1217 Ck 53 Pb C 90 S 1.1338 C 22.8 S
1.1218 Cm 45 Pb
Technical Data
SOLID CARBIDE
DRILLS
Number Number
MODULAR DRILLS
1.1339 GS-C 25 S 1.2352 22 CrMoV 7
1.1380 St 835/1030 1.2355 50 CrMoV 13 50 CrMoV
1.1381 St 900/1100 15 13-15
1.1520 C 70 W1 CT 70 C 70 E 2 U C 70 K U 1.2356 60 CrMoV 13 5
1.1525 W C 80 W1 T72301 C 80 U Y1 90 C 80 KU 1880 1.2358 60 CrMoV 18 5
108 1.2369 81 MoCrV 42 16
COMBINATION
1.1535 C 90 U C90U 1.2382 GX 155 CrVMo
TOOLS
1.1545 W C 105 W1 BW1A T72301 C 105 U Y 105 C 100 KU 1880 121
110 1.2414 120 W 4
1.1554 C 110 W C 110 U 1.2419 105 WCr 6 SKS 31 105 WCr 5 (107 WCr 13) 107 WCr 5 2140
1.1555 C 120 U C120U KU
1.1563 W C 125 W C 125 U 1.2424 75 WCr 12
CARBIDE TAPS
112 1.2442 W 5 115 W 8 T72305
HSS AND
1.1620 C 70 W2 C 70 U 1.2510 O 1 100 MnCrW 4 BO 1 SKS 3 T 31501 (95 Mn 90 MWCV 5 95 MnWCr 2140
1.1625 T 8 C 80 W2 BW 1B SKC 3 T12008 Y1 80 C 80 KU WCr 5) 5 KU
1.1645 C 105 W2 SK 3 1.2516 A-10 120 WV 4 BF 1 T30110 110 WC 20 110 W 4 KU
1.1654 C 110 W 1.2519 110 WCrV 5
1.1663 W C 125 W SK 2 T72301 C 120 U Y2 120 C 120 KU 1.2521 110 WCrV 8
112 1.2542 S1 45 WCrV 7 BS 1 T 41901 45 WCrV 8 45 WCr V 8 45 WCrV 8 2710
INDEXABLE
1.1673 C 135 W SK 1 Y2 140 C 140 KU KU
DRILLS
1.1730 C 45 W C 45 U Y3 42 1.2549 50 WCrV 8 50WCrV8
1.1740 C 60 W SK 7 Y3 55 1.2550 S1 60 WCrV 7 BS1 60 WCrV 8 55 WC 20 55 WCrV 8
1.1744 A-6 C 67 W T30106 Y1 70 KU
1.1750 W 1 C 75 W BW 1A 1.2552 80 WCrV 8
1.1820 C 55 W 1.2590 GS-80 CrVW 4 3
COUNTERBORING
1.1830 1084 C 85 W SK 5 G10840 C 90 U Y3 90 1.2603 45 CrVMoW 5 8
TOOLS
1.2002 125 Cr 1 125 Cr 2 Y2 120 C 1.2604 73 WCrMoV 22
1.2003 75 Cr 1 1.2661 38 CrCoWV 38 CrCoWV
1.2004 85 Cr 1 Y1 100 C 2 18 17 17 18-17-17
1.2008 140 Cr 3 SKS 8 140 Cr 2 Y2 140 C 1.2705 80 NiCr 11
1.2056 P21 90 Cr 3 T51621 1.2708 54 NiCrMoS 6
PRECISION HOLE
1.2057 105 Cr 4 SKC 11 1.2710 45 NiCr 6
FINISHING
1.2063 145 Cr 6 1.2711 54 NiCrMoV 6 55 NCDV 6
1.2067 L3 100 Cr 6 BL3 T61203 102 Cr 6 Y 100 C 6 102 Cr 6 KU 1.2713 L6 55 NiCrMoV 6 BH 224/5 SKT 4 T61206 55 NiCrMoV 55 NCDV 7 55 NiCrMoV
1.2101 62 SiMnCr 4 7 7 KU
1.2103 S2 58 SiCr 8 BS 2 T41902 1.2714 P5 56 NiCrMoV 7 T51605 56 NiCrMoV 56 NiCrMoV
1.2162 21 MnCr 5 SCR 420 H 21 MnCr 5 20 NC 5 7 7 KU
1.2203 145 V 12 1.2718 55 NiCr 10
1.2208 31 CrV 3 31 Cr V2 1.2721 50 NiCr 13 55NCD13
INSERTS
1.2210 L-2 115 CrV 3 T61202 107 Cr V 3 100 C 3 107 CrV 3 1.2726 26 NiCrMoV 5
KU KU 1.2735 P6 15 NiCr 14 SNC 22 T51606 10 NC 12
1.2235 80 CrV 2 T91905 80 Cr V 2 1.2736 55 CrNiMo 4
1.2236 80 CrV 2 3 1.2737 28 NiCrV 5
1.2241 S6 51 CrMnV 4 T41906 51 CrMnV 4 51 CrMnV 4 1.2738 40 CrMnNiMo 40 CrMnNi
TECHNICAL DATA
KU 864 Mo 8-6-4
1.2302 35 CrMo 7 35 CrMo 7 1.2739 40 CrNiMoV 3
1.2307 29 CrMoV 9 34
1.2313 21 CrMo10 1.2740 28 NiCrMoV 10
1.2320 G 60 CrMoV 1.2741 55 CrNiMoVS 4
10 7 24
1.2323 48 CrMoV 67 45 CDV 6 1.2742 55 CrNiMoV 4
1.2326 G 48 CrMoV 6 7 24
INDEX
1.2328 45 CrMoV 7 1.2743 60 NiCrMoV 12

1.2330 P-20 35 CrMo 4 BP 20 T51620 4135.0000 35 CrMo 4 4
1.2332 4145 47CrMo 4 G41450 4142.0000 1.2744 57 NiCrMoV 7 7 55 NiCrMoV
1.2333 G 59 CrMoV 18 7
5 1.2745 14 NiCr 18
1.2334 62 CrMoV 6 1.2762 75 CrMoNiW 6 7
Technical Data
SOLID CARBIDE
DRILLS

MODULAR DRILLS
Number Number
1.2770 85 NiV 4 1.5092 9262 60 SC 7 G92620 60 SiCr 8 61 SC 7 60 SiCr 8

1.2773 75 NiCrMo 5 3 3 1.5120 38 MnSi 4
1.2778 GS-20 MoNi 33 1.5121 46 MnSi 4
13 1.5122 37 MnSi 5 38 MS 5
1.2823 70 Si 7 F.130.A
COMBINATION
1.2824 70 MnMoCr 8 70 MnMoCr 8 1.5131 50 MnSi 4 K04800

TOOLS
1.2825 95 MnWCr 5 95 MnWCr 5 1.5141 53 MnSi 4

1.2826 60 MnSi 4 60 MSC 4 1.5142 60 SiMn 5
1.2833 W 100 V 1 BW 2 SKS 43 T72302 100 V 2 Y1 105 V 102 V 2 KU 1.5213 15 MnV 5
210 1.5216 17 MnV 6
1.2838 145 V 33 1.5223 42 MnV 7
1.2840 20 MV 6 1.5225 51 MnV 7
CARBIDE TAPS
HSS AND
1.2842 O 2 90 MnCrV 8 BO 2 T31502 90 Mn V 8 90 MV 8 90 MnVCr 1.5243 42 MnSiV 3 3

8 KU 1.5310 8 SiTi 4
1.2851 34 CrAl 6 1.5402 15 MnMoV 4 5 15 MnMoV 15 MDV 4.05
1.3433 GS-60 CrSi 5 4-5
1.3502 85 Cr 2 1.5404 21 MoV 5 3
1.3505 E 100 Cr 6 535 A 99 SUJ 2 G52986 100 Cr 6 100 C 6 100 Cr 6 2258 1.5406 17 MoV 8 4
52100 1.5415 A 204 15 Mo 3 1501 STFA 12 K11820 16 Mo 3 15 D3 16 Mo 3 2912
INDEXABLE
DRILLS
1.3514 101 Cr 6 102 Cr 6 KU Gr.A -240 KW

1.3515 20 MnCr 4 2 1.5419 4419 GS-22 Mo 4 243-430 SCPH 11 G44190 G 20 Mo 5 G20Mo5 G 22 Mo 5
1.3518 100 CrMnSi 4 4 1.5421 20 MnMo 3 5 K12121
1.3519 100 CrMnSi 6 6 1.5422 G 18 Mo 5 G18Mo5 G 18 Mo5
1.3520 100 CrMn 6 K19195 100 CrMn 6 100 CM 6 1.5423 4520 16 Mo 5 1503-245- SBC 690 K11522 16 Mo 5
COUNTERBORING
1.3523 19 MnCr 5 420

TOOLS
1.3531 16 CrNiMo 6 820A16 16 NCD 6 16NiCrMo6 1.5425 11 MnMo 4 5 K11123 11 MnMo 45

1.3532 16 NiCrMo 16 5 KE
1.3536 100 CrMn 7 3 100 CrMnMo 100 CD 7 1.5426 13 MnMo 6 5 K11424 11 MnMo 65
7 KE
1.3537 100 CrMo 7 SUS 4 K19965 100 CrMo 7 100 CD 7 100CrMo7 1.5427 13 MnMo 8 5 K11423 11 MnMo 85
1.3539 100 CrMnMo 8 100 CrMnMo 8 KE
PRECISION HOLE
FINISHING
1.3555 13 MoCrNi 42 1.5428 13 MnMo 12 5

16 14 1.5432 4037 42 MnMo 7 En 16 G40370
1.3559 20 Cr 3 1.5437 70 MoMn 10 4
1.3561 5046 44 Cr 2 H50460 46 Cr 1 KD 44 Cr 2 1.5472 6 CuNb 15 5
1.3563 4142 43 CrMo 4 G41420 43 Cr Mo 4 1.5509 23 B 2
1.3565 4147 48 CrMo 4 817 M 40 SNC 836 H41470 48 CrMo 4 1.5510 28 B 2 SWRCHB C 30 B 20 B 3
1.3566 15 CrMo 4 26
INSERTS
1.3567 20 CrMo 4 1.5511 35 B 2 SWRCHB C 35 B 35 B 3

1.3570 20 MnCrMo 4 2 237
1.3576 20 NiCrMo 7 1.5524 37 MnB 4
1.3821 8 SiCr 7 3 1.5525 20 MnB 4
1.4475 GX 150 CrNiMo 1.5527 40 MnB 4 170 H 41 SWRCHB
TECHNICAL DATA
CuN 41 6 2 437
1.4700 8 CrSi 7 7 1.5528 22 MnB 5
1.5021 48 Si 7 1.5530 15B21 20 MnB 5 SWRCHB 20 MnB 5 20 MnB 5 20 MnB 5
1.5022 38 Si 6 H 620
1.5023 38 Si 7 1.5532 15B37 38 Mn B 5 SWRCHB 38 Mn B 5 38 Mn B 5 38 MnB 5
1.5024 46 Si 7 45 Si 46 S 7 H 737
1.5025 9259 51 Si 7 50 Si 7 48 Si 7 2090 1.5535 23 MnB 4
H 1.5537 36 MnB 4
INDEX
1.5026 55 Si 7 250 A 53 G92550 56 Si 7 55 S 7 55 Si 8 2085 1.5538 37 MnB 5

1.5027 9260 60 Si 7 251 A 60 G92600 60 Si 7 60 S 7 60 Si 7 1.5622 A 350 14 Ni 6 SL2N26 K22103 FeE 285 Ni 6 15 N 6 14 Ni 6
1.5028 65 Si 7 SUP 7 -LF 5
1.5029 71 Si 7 1.5633 24 Ni 8 SCPL 21 J22501 G 9 Ni 10 22 N 8 G9Ni10
1.5069 36 Mn 7 1.5637 A 350 10 Ni 14 503 SL 3 N 26 K31718 12 Ni 14 12Ni14 18 Ni 14 KT
1.5085 51 Mn 7 -LF 5
1.5086 12 Mn 8 11 Mn 8 KE
Technical Data
SOLID CARBIDE
DRILLS
MODULAR DRILLS
Number Number
1.5639 A16 Ni 14 SHY 70 K31918 3.5 Ni 1.6565 4340 40 NiCrMo 6 818M40 SNCM G43400
2317 349
1.5713 P3 10 NC 6 T51603 15 NiCr 6 10 NC 6 1.6571 20 NiCrMoS 20 NiCrMoS 20 NiCrMoS
1.5714 16 NiCr 4 16 NiCr 4 16 NiCr 4 16 NiCr 4 6-4 6-4 6-4
1.5715 16 NiCrS 4 16NiCrS4 16 NiCrS 4 16 NiCrS 4 1.6580 30 CrNiMo 8 823 M 30 SNCM 30 CrNiMo 8 30 CND 8 30 NiCrMo 3524
COMBINATION
1.5732 3415 14 NiCr 10 SNC 415 14 NC 12 16 NiCr 11 431 KD 8
TOOLS
H 1.6582 4340 34 CrNiMo 6 817 M 40 SNCM G43370 34 CrNiMo 6 35 NCD 6 35 NiCrMo 2541
1.5733 14 NiCrPb 10 447 6 KB
1.5752 E 14 NiCr 14 655 M 13 SNC 815 G33106 13 NiCr 12 16 NC 11 16 NiCr 11 1.6583 35 CrNiMo 6
3310 H 1.6585 29 CrNiMo 8
1.5805 10 NiCr 5 4 10NiCr5-4 10 NiCr 5-4 10 NiCr 5-4 1.6586 31 CrNiMo 8 K23550
1.5807 15NiCr 6 4 1.6587 17 CrNiMo 6 820 A 16 SNCM 17 CrNiMo 7 18 NCD 6 18 NiCrMo 2523
CARBIDE TAPS
HSS AND
1.5860 14 NiCr 18 815 7
1.5918 17 CrNi 6 6 17 CrNi 6-6 17 CrNi 6-6 16 CN 6 1.6589 34 CrNiMo 6 S
1.5919 15 CrNi 6 S107 SNCM H43200 14 CrNi 6 16 NC 6 16 CrNi 4 1.6655 32 NiCrMo 12 5 K34035 30 NCD 12
420 1.6658 15NiCrMo
1.5920 18 CrNi 8 20 NC 6 10-6
1.6211 16 MnNi 6 3 1.6723 15 NiCrMo 835 M 15 15 NiCrMo
1.6213 12 MnNi 6 3 FeE 285 Ni 2 16 5 16-5
INDEXABLE
DRILLS
1.6215 9 MnNi 4 1.6732 28 NiCrMo 5 5
1.6216 17 MnNi 4 1.6738 40 NiCrMo 18 6
1.6218 9 MnNi 6 1.6745 40 NiMoCr 10 5 4S.99
1.6308 18 MnMoNi 5 5 18 MnMoNi 1.6752 22 NiMoCr 67
5-5 1.6755 4718 22 NiMoCr 4 7 G47180
COUNTERBORING
1.6311 20 MnMoNi 4 5 SQV 2 B K12539 20 MnMoNi 1.6757 20 NiMoCr 6 5
TOOLS
4-5 1.6758 23 MnNiMoCr 5
1.6312 10 NiMnMo 6 5 K11160 4
1.6313 10 NiMnMoCr 1.6782 16 NiCrMO 12 6 16 NCD 13
66 1.6918 15 MnNiMoV 5
1.6342 12 MnNiMoV 3
54 1.6920 15 MnCrMoNiV 15 MnCrMo
PRECISION HOLE
FINISHING
1.6343 12 MnNiMo 5 5 53 NiV 5-3
1.6347 26 NiMoV 14 4 1.6932 28 NiCrMoV 8 5 28 NiCrMoV
1.6348 20 NiMoV 14 5 8-5
1.6511 9840 36 CrNiMo 4 816 M 40 G98400 36 CrNiMo 4 40 NCD 3 38 NiCrMo 1.6935 35 CrNiMoV 8
4 KB 1.6950 20 NiCrMoV 14
1.6513 28 NiCrMo 4 6
1.6522 20 NiCrMo 2 605 M 36 20 NiCrMo 2 1.6951 32 NiCrMoV 14
INSERTS
1.6523 8620 21 NiCrMo 2 805 M 20 SNCM G86200 20 NiCrMo 2 20 NCD 2 20 NiCrMo 2506 5
220 H KD 2 1.6952 24 NiCrMoV 14
1.6526 20 NiCrMoS 2 2 20 NiCrMoS 20 NiCrMoS 6
2-2 2-2 1.6955 32 NiCrMoV 10
1.6527 20 NiCrMo 3 1.6956 33 NiCrMoV 14 33 NiCrMoV 30 NCD 15
TECHNICAL DATA
1.6540 23 MnNiCrMo 5 5 14-5
3 1.7001 38 Cr 1 38 Cr 1 KB
1.6542 24 MnNiCrMo 6 1.7002 46 Cr 1
2 1.7003 50B 38 Cr 2 120 M 36 SMn 438 G50401 38 Cr 2 KD 38 C 2 38 Cr 2
1.6543 8622 21 NiCrMo 2 2 805A20 SNCM G86220 20 NiCrMo 2 22 NCD 2 2506 40
220 H KD 1.7005 45 Cr 2 45 Cr 2 45 Cr 2
1.6545 8630 27 CrNiMo 2 G86300 30 NiCrMo 2 30 NCD 2 30 NiCrMo 1.7006 5045 46 Cr 2 605 M 36 SMn 443 H51500 46 Cr 2 KD 42 C 2 45 Cr 2
KD 2 KB 1.7007 50B 37 CrB 1 120 M 36 SMnC 3 H50401 38 Cr 2 35 CB 1
INDEX
1.6546 8640 40 NiCrMo 2 7 SNCM G86400 40 NiCrMo 2 40 NCD 2 4 0NiCrMo 40 H

KB 240 KD 2 KB 1.7012 13 Cr 2
1.6562 E 40 NiCrMo 7 817 M 40 G43406 40NiCrMo7 1.7014 17 CrS 3 17 CrS3 17 CrS 3 17 CrS 3
4340 1.7015 5015 15 Cr 3 523 M15 SCr 415 H G50150 15 Cr 2 12 C 3
1.6563 41 NiCrMo 7 3 41NiCrMo7- 41NiCrMo7- 1.7016 5117 17 Cr 3 17 Cr 3 G51170 (15 Cr 2 KD) 18 C 3
2 3-2 3-2 1.7017 60 Cr 3
Technical Data
SOLID CARBIDE
DRILLS

MODULAR DRILLS
Number Number
1.7020 32 Cr 2 1.7244 18 CrMoS 4 18CrMoS4 18CrMoS4 18CrMoS4

1.7021 32 CrS 2 1.7255 23 CrMo 5
1.7027 20 Cr 4 1.7258 24 CrMo 5 SCM 822
1.7028 20 CrS 4 H
1.7030 5130 28 Cr 4 530 A 30 G51300 28 Cr 4 30 CD 4 1.7259 26 CrMo 7
COMBINATION
1.7033 5130 34 Cr 4 530 A 32 SCr 430 G51300 34 Cr 4 KD 32 C 4 34 Cr 4 KB 1.7262 15 CrMo 5 SCM 415 12 CD 4
TOOLS
H H H
1.7034 5132 37 Cr 4 530 A 36 SCr 435 G51320 37 Cr 4 38 C 4 36 CrMn 4 1.7264 20 CrMo 5 SCM 421 18 CD 4
H H 1.7271 23 CrMoB 3 3
1.7035 5140 41 Cr 4 530 M 40 SCr 440 H G51400 41 Cr 4 42 C 4 41 Cr 4 1.7272 31 CrMoB 2 1
1.7036 28 CrS 4 28CrS4 28CrS4 1.7273 24 CrMo 10
1.7037 34 CrS 4 34 CrS 4 34 CrS 4 34 CrS 4 34 CrS 4 1.7276 10 CrMo 11 12 CD 10
CARBIDE TAPS
HSS AND
1.7039 41 CrS 4 41 CrS 4 41 CrS 4 41 CrS 4 41 CrS 4 2245 1.7281 16 CrMo 9 3 20 CD 8

1.7043 38 Cr 4 38 Cr 4 38 Cr 4 1.7305 12 CrMo 11 10
1.7045 5140 42 Cr 4 530 A 40 SCr 440 40 NiCrMo 3 42 C 4 TS 40 NiCrMo 3 2245 1.7311 20 CrMo 2
1.7072 36 CrB 2 1.7315 37 CrMo 3
1.7075 46 CrB 2 1.7319 20 MoCrS 3 20 MoCrS 3 20 MoCrS 3
1.7076 32 CrB 4 1.7320 20 MoCr 3 20 MoCr 3 20 MoCr 3
1.7077 36 CrB 4 1.7321 20 MoCr 4 SCM 21 H 20 MoCr 4
INDEXABLE
DRILLS
1.7102 54 SiCr 6 54 SC 6 1.7323 20 MoCrS 4 20 MoCrS 4

1.7103 67 SiCr 5 67 SiCr 5 67 SiCr 5 1.7325 25 MoCr 4 20 NiCrMo 2
1.7104 55 SiCr 6 3 1.7326 25 MoCrS 4
1.7106 55 SiCr 7 1.7333 22 CrMoS 3 5 22 CrMoS 22 CrMoS 3-5
1.7108 9262 60 SiCr 7 60 SiCr 8 3-5
COUNTERBORING
1.7116 42 MnNiCrB 4 3 1.7335 A182 13 CrMo 4 4 1501-621 SFVA F K11562 13 CrMo 4-5 15 CD 4.05 14 CrMo 4 2216
TOOLS
1.7117 52 SiCrNi 5 52 SCN 5 -F11 12 5

1.7121 20 CrMnS 3 3 1.7337 A 387 16 CrMo 4 K11564 A 18 CrMo
1.7131 5115 16 MnCr 5 527 M 17 SCR 415 G 51150 16 MnCr 5 16 MC 5 16 MnCr 5 2173 Gr. 12 4 4 5 KW
KD Cl. 2
1.7137 60 MnCrB 3 1.7339 11 CrMo 5 5 K22094
1.7138 50 B 52 MnCrB 3 SUP 11 H50501 1.7340 UP S4 CrMo 1
PRECISION HOLE
FINISHING
50 H 1.7341 GS-34 CrMo 4 4

1.7139 16 MnCrS 5 1.7346 11 CrMo 4 5
1.7146 20 MnCrPb 5 1.7350 22 CrMo 44
1.7147 5120 20 MnCr 5 SMnC G51200 20 MnCr 5 20 MC 5 20 MnCr 5 1.7356 7 CrMo 7 5
420 H 1.7357 55 B2 SCPH 21 J11872 5 G 17 CrMo G17CrMo
1.7149 20 MnCrS 5 20 MnCrS 5 5-5 5-5
1.7160 16 MnCrB 5 16MnCrB5 16MnCrB5 16MnCrB5 1.7358 12 CrMo 8 5 K21509
INSERTS
1.7176 5155 55 Cr 3 527 A 60 SUP 9 (A) G51550 55 Cr 3 55 C 3 55 Cr 3 2253 1.7360 31 CrMo 12 5

1.7186 20 MnCr B5 1.7361 32 CrMo 12 722 M 24 32 CrMo 12 30 CD 12 32 CrMo 12 2240
1.7190 35 CrSi 84 1.7362 12 CrMo 19 5 3606-625 SCMV 6 K41545 X 12 CrMo 5 Z 10 CD 5.05 16 CrMo 20
1.7211 4118 23 CrMoB 4 SCM 21 H G41180 20 MoCr 4 5
1.7213 25 CrMoS 4 25 CrMoS 4 25 CrMoS 4 25 CD 4u 25 CrMoS 4 1.7363 GS-12 CrMo 19 SCPH 61 J42045 GX 12 CrMo
TECHNICAL DATA
1.7218 4130 25 CrMo 4 708 A 25 SCM 420 G41300 25 CrMo 4 25 CD 4 25 CrMo 4 2225 5 5
KD (KB) 1.7373 X 7 CrMo 6 1 B 5 S50281 CM 5-IG
1.7220 4137 34CrMo4 708 A 37 SCM 435 H41350 34 CrMo 4 35 CD 4 35 CrMo 4 2234 1.7374 CM 5-UP
H KD 1.7375 12 CrMo 9 10 12 CrMo 9-10
1.7223 4142 41 CrMo 4 708 M 40 SCM 440 G41420 41 CrMo 4 42 CD 4 TS 41 CrMo 4 2244 1.7379 GS-18 CrMo 9 SCPH 32 G 17 CrMo 9
1.7225 4140 42 CrMo 4 708 A 42 SCM 440 G41400 42 CrMo 4 42 CD 4 42 CrMo 4 2244 10 10
H 1.7380 A182 10 CrMo 9 10 1502-622 SCMV 4 J21890 10 CrMo 9 10 CD 9.10 12 CrMo 9 2218
1.7226 34 CrMoS 4 708 A 37 34 CrMoS 4 34 CD 34 CrMoS 4 2234 -F22 10 10
INDEX
1.7227 42 CrMoS 4 708 H 42 42 CrMoS 4 42 CD 42 CrMoS 4 2244 1.7381 12 CrMo 12 10

1.7228 4150 50 CrMo 4 708 A 47 SCM 445 G41500 50 CrMo 4 50 CrMo 4 1.7383 11 CrMo 9 10 11 CrMo SCMV 4 11 CrMo 9-1010 CD 9.10 11 CrMo 9-10
H 9-10
1.7233 42 CrMo 5 6 42CrMo5-6 42CrMo5-6 1.7384 7 CrM0 11 10 A 33
1.7242 16 CrMo 4 18 CrMo4 SCM 418 18 CrMo 4 15 CD 3.5 18 CrMo 4 1.7385 6 CrMo 9 10
H 1.7386 X 12 CrMo 9 1 629-590 STFA 26 S50488 X 10 CrMo
1.7243 18 CrMo 4 18CrMo4 SCM 418 18CrMo4 18CD4 18 CrMo 4 S690G2QL VNb 9-1
Technical Data
SOLID CARBIDE
DRILLS
MODULAR DRILLS
Number Number
1.7388 SG-CrMo 9 S50480 1.8819 PS 275 TMK S 275 ML S 275 ML S 275 ML S 275 ML
1.7706 GS-17 CrMoV SCPH 23 J21610 G 17 CrMoV G17CrMoV5-G 17 CrMoV 5 1.8822 S 355 G1 M S 355 G 1 M
5 11 5 10 10 10 1.8829 S 500 M S 500 m
1.7707 30 CrMo V9 30 CrMoV 9 1.8830 S 420 G1 M P 550 M
1.7709 21 CrMoV 5 7 K14073 21 CrmoV 20 CDV 5.07 1.8838 BTStE 460 TM S 460 ML S 460 ML E 460 S 460 ML
COMBINATION
5-7 1.8839 S 500 ML S 500 ML
TOOLS
1.7715 14 MoV 6 3 1503-660- K11591 14 MoV 6-3 1.8843 S 275 MH S 275 MH S 275 MH
460 1.8844 S 275 MLH S 275 MLH S 275 MLH
1.7720 G 12 MoCrV 5 2 G 12 MoCrV G12MoCrV G12MoCrV 1.8845 S 355 MH S 355 MH S 355 MH
5-2 5-2 5-2 1.8846 S 355 MLH S 355 MLH S 355 MLH
1.7728 16 CrMoV 4 1.8847 S 420 MH S 420 MH S 420 MH
1.7729 20 CrMoVTiB 20 CrMoVTiB 20 CrMoVTiB 1.8848 S 420 MLH S 420 MLH S 420 MLH
CARBIDE TAPS
HSS AND
4-10 4-10 4-10 1.8849 S 460 MH S 460 MH S 460 MH
1.7734 15 CrMoV 6 1.8850 S 460 MLH S 460 MLH S 460 MLH
1.7735 14 CrMoV 6 9 1.8851 S 420 G3 M
1.7737 45 CrMoV 6 7 45 CDV 4 1.8852 S 420 G6 Q
1.7745 15 CrMoV 5 10 1.8853 FStE 355 OS 4 S 420 G 2
1.7766 17 CrMoV 10 / S420G5Q
1.7779 20 CrMoV 13 5 1.8857 S 420 G2 M
INDEXABLE
DRILLS
1.7792 580 CrM0V 4 1.8859 S 420 G4 M
1.8062 46 SiCrMo 6 3 45 SCD 6 1.8861 St835/1030
1.8075 10 CrSiMoV 7 1.8863 54SICR7
1.8159 6150 50 CrV 4 735 A 50 SUP 10 G61500 51 CrV 4 50 CV 4 50 CrV 4 2230 1.8878 P 550 QL P 550 QL
1.8161 58 CrV 4 1.8883 S 460 G3 M
COUNTERBORING
1.8404 5150 60 MnCrTi 4 BW 2 G51500 1.8884 S 460 G6 Q
TOOLS
1.8405 70 MnCrTi 8 1.8885 S 460 G5 Q
1.8425 110 MnCrTi 8 1.8887 S 460 G2 N
1.8504 34 CrAl 6 1.8889 S 460 G4 M
1.8506 34 CrAlS 5 K23745 1.8900 St E 380 SM 50 B S 380 N Fe E 390 KG
1.8507 A 355 34 CrAlMo 5 905 M 31 K23510 (34 CrAl 30 CAD 6.12 34 CrAlMo 1.8901 StE 460 S 460 N S 460 N E 460 S 460N
Cl.D Mo 5) 7 1.8902 A 633 St E 420 S 420 N SM 50 C K02002 FeE 420 KGN E 420-I Fe E 420 KG 2143
PRECISION HOLE
FINISHING
1.8515 31 CrMo 12 722 M 24 31 CrMo 12 30 CD 12 31 CrMo 12 2240 Gr. E
1.8519 31 CrMoV 9 K42544 31 CrMoV 9 31 CrMoV 1.8903 TStE 460 S 460 L S 460 NL E460 S 460 NL
10 1.8904 S 550 Q S 550 Q E 550 S 550 Q
1.8564 4S.106 1.8905 A 633 St E 460 P 460 N SM 53 B K02900 P 460 N E 460-I Fe E 460 KG 2143
1.8599 8 CrMo 16 Gr. E
1.8701 20 MnCr 5 3 1.8906 BGH 8906 55 F S 460 QL S 460 QL S 460 QL
1.8702 21 MnCr 5 4 1.8907 St E 500 SM 58 K02001
INSERTS
1.8706 21 MnCr 7 5 1.8908 S 460 Q 55 F S 460 Q E 460 S 460 Q
1.8708 20 MnCrNiMo 6 1.8910 TStE 380 / S 380 NL Fe E 390 KT 2117
3 S380NL
1.8716 16 MnCrMo 3 2 1.8911 EStE 380 /
1.8717 16 MnCrMo 4 3 S380NL1
TECHNICAL DATA
1.8719 15 MnCrMo 3 2 1.8912 S 420 NL / S 420 NL STK 540 K02002 S 420 NL E 420 T-I Fe E 420 KT
1.8720 18 MnCr 5 3 TStE 420
1.8801 S 355 G2 N 1.8913 EStE 420 / STK 540
1.8802 S 355 G3 N S420NL1
1.8803 S 355 G4 M 1.8914 S 620 Q S 620 Q E 620 S 620 Q
1.8804 S 355 G5 M 1.8915 T St E 460 / P 460 NL 1 K02900 P 460 NL1 E 460 T-I Fe E 460 KT
1.8805 S 355 G6 M P460NL1
1.8806 S 355 G11 NM 1.8916 S 460 QL1 55 F S 460 QL 1
INDEX
1.8807 13 MnNiMo 5 4 1.8917 T St E 500 K02001 E 500 T-I

1.8808 S 355 G7 M 1.8918 EStE 460 / P 460 NL 2 P 460 NL 2 P 460 NL 2 P 460 NL 2
1.8809 S 355 G12 NM P460Nl2
1.8810 S 355 G8 MN 1.8919 EStE 500 / S500NL1 S 500 NL 1
1.8811 S 355 G8 M 1.8920 TStE 690 VA / S 690 G 1 QL
1.8813 S 355 G10 M S690G1QL
1.8814 S 355 G1 N 1.8921 TStE 690 VB / K11646 S 690 G 2 QL
Technical Data
SOLID CARBIDE
DRILLS

MODULAR DRILLS
Number Number
1.8922 S 690 G 4 QL / S 690 G 4 QL 1.8948 L 360 QB L 360 QB L 360 QB

TStE 690 VC 1.8952 L 450 QB L 450 QB L 450 QB
1.8923 S 590 QL / S 590 QL 1.8953 S 460 NH S 460 NH S 460 NH
TStE 590 V (FGS 47)
1.8924 S 500 Q S 500 Q E 500 S 500 Q 2614 1.8954 EStE620VA / S 620 G 1
COMBINATION
(StE 500 V ) S 620 G 1 QL 1 QL 1

TOOLS
1.8925 S 890 QL 1 S 890 QL 1 1.8955 L 485 QB L 485 QB L 485 QB

(EStE 90 V ) 1.8956 S 460 NLH / FG S 460 NLH S460NLH
1.8928 S 690 QL SHY 685 S 690 QL S 47
(TStE 690 V) NS 1.8957 L 555 QB L 555 QB L 555 QB
1.8929 TStE 690 VD / S 690 G 3 QL 1.8962 9 CrNiCuP 3 2 4 WR 50 A SPA-H K11430
S690G3QL 1.8963 WTSt 52-3 WR 50 C SMA 58 K11430 S 355 J 2 G E 36 W-A2
CARBIDE TAPS
HSS AND
1.8930 WSt E 380 / P 380 NH Fe E 390 2116 W 1W

P380Nh KW 1.8964 EStE 690 VA S 690 G1
1.8931 S 690 Q / SHY 685 S 690 Q E 690 S 690 Q QL1
StE 690 V N 1.8965 S 355 J 2 G S 355 J 2 G S 355 J 2 G S 355 J 2 G S 355 J 2 G
1.8932 WSt E 420 / S 420 NL STK 540 K02002 S 420 NL S 420 NL Fe E 420 2W 2W 2W 2W 2W
P420NH KW 1.8966 S 355 K 2 G 1 S 355 K 2 G SMA 490 S 355 K2 G1 S 355 K2 G1 S 355 K 2 G
1.8933 S 960 QL / S 960 QL W 1W CW W W 1W
INDEXABLE
DRILLS
TStE 960 V 1.8967 S 355 K 2 G 2 S 355 K 2 G S 355 K2G2 S 355 K 2 G 2 S 355 K 2 G

1.8934 S 960 QL 1 W 2W W W 2W
1.8935 WSt E 460 / P 460 NH K02900 P 460 NH P 460 NH Fe E 460 1.8968 L 515 MB
P460NH KW 1.8969 QStE 600 TM / S 600 MC E 620 D S 600 MC
1.8936 P420 QH P 420 QH S 600 MC
COUNTERBORING
1.8937 WSt E 500 / K02001 1.8972 StE 415..7 / L 415 NB L 415 NB

TOOLS
P500NH L 415 NB
1.8938 TStE 770 V / S 770 QL 1.8973 StE 415.7 TM / L 415 MB L 415 MB
S770QL L 415 MB
1.8939 EStE 790 V / S 790 QL 1 1.8974 S 700 MC S 700 MC E 690 D S 700 MC
S790QL1 (QStE 690 TM)
1.8940 S 890 Q S 890 Q S 890 Q S 890 Q 1.8975 L 450 MB / StE L 450 MB L 450 MB
PRECISION HOLE
FINISHING
1.8941 S 960 Q S 960 Q E 960 T-II S 960 Q 445.7 TM

1.8944 S 550 G 1 QL 1 S 550 G 1 1.8976 S 650 MC S 650 MC E 620 D S 650 MC
/ EStE 550 VA QL 1 (QStE 650 TM)
1.8945 S 355 J 0 WP WR 50 A S 355 J0 WP E 36 W-A3 S 355 J0 1.8977 L 485 MB / StE L 485 MB L 485 MB
WP 480.7 TM
1.8946 S 355 J 2 WP S 355 J 2 S 355 J2 WP E36W-A4 S 355 J2 1.8978 StE 550.7 TM / L 555 MB L 555 MB
WP WP L 555 MB
INSERTS
1.8947 L 415 QB L 415 QB L 415 QB 1.8989 22 MnCrMoV 6

TECHNICAL DATA
INDEX
Technical Data
SOLID CARBIDE
DRILLS
P4 Alloy Steels and Tool Steels Content: C > .25% Tensile Strength RM (MPa)*: 800-1100 Hardness (HB): 350-450
Number Number
MODULAR DRILLS
1.0319 L 210 GA L 210 GA TS E 220 1.0973 QSt E 300 N 7/ AE 340 S 315 NC S 315 NC
class 2 S 315 NC NC
1.0418 L 245 MB 430 K03006 L 245 MB L 245 MB 1.0974 QSt E340 TM HR 40/30 S 340 MC E 335 D
1.0429 L 290 MB L290MB L 290 MB 1.0975 QSt E340 N S 340 NC Fe E 355
1.0457 StE 240.7 L 245 NB L 245 NB TD
COMBINATION
1.0458 HIII / L 235 GA L 235 GA 1.0976 QSt E 360TM S 355 MC E 355 D Fe E 355
TOOLS
1.0459 L 245 GA / L 245 GA TS E 250 TM
RRStE 240.7 1.0977 QSt E360 N S 355 NC Fe E 355
1.0470 21Mn4Al TD
1.0479 13 Mn 6 1.0978 QSt E380 TM S 380 MC E 390 D
1.0480 H 260 / H 240 LA H 240 LA E 240 C 1.0979 QSt E380 N S 380 NC Fe E 380 TD
ZSt E 260 1.0980 QSt E420 TM HR 50 F 45 S 420 MC E 430 D Fe E 420
CARBIDE TAPS
HSS AND
1.0483 L 290 AG L290GA TS E 290 TM
1.0484 L 290 NB L290NB L 290 NB 1.0981 QSt E 420 N S 420 NC Fe E 420 TD
1.0485 21 Mn 6 K12320 1.0982 QSt E 460 TM 50/45 HR S 460 MC E 445 D
1.0489 H 300 / H280LA H 280 LA E 280 C 1.0983 QSt E 460 N S 460 NC Fe E 460 TD
ZSt E 300 1.0984 QSt E500 TM S 500 MC E 490 D Fe E 490 2662
1.0491 TStE 275 40EE S 275 NL S 275 NL S 275 NL TM
(S 275 NL) 1.0985 QSt E500 N S 500 NC
INDEXABLE
DRILLS
1.0499 L 360 GA L 360 GA 1.0986 QSt E550 TM 60/55 HS S 550 MC E 560 D Fe E 560
1.0519 1046 S 355 K 2 G10460 S 355 K2 TM
G 4 Cu G4 Cu 1.0987 QSt E550 N S 550 NC
1.0545 S 335 N 50 E S 355 N E 355 S 355 N 2134 1.1128 1548 46 Mn 5 G15480
(StE 355 ) 1.1136 G 24 Mn 4 / G 24 Mn 4
COUNTERBORING
1.0546 S 355 NL 50 E E S 355 NL E 355 S 355 N L 2135 GS 24 Mn 4
(TStE 355) 1.1197 25 MnV 5
TOOLS
1.0548 ZStE 340/ H 320 L A H 320 LA E 315 C 1.1199 49 MnVS 3 280 M 01
H 340 1.1226 1552 52 Mn 5 G15520
1.0550 ZStE 380 / H 360 L A H 360 LA E 355 C 1.1235 37 Mn 6
H 380 1.1302 30 MnVS 6 30 MnVS 6
1.0556 ZStE 420 / "46/40HR, H 400 LA H 400 LA 1.1303 38 MnVS 6 38 MnVS 6
PRECISION HOLE
H 420 HS,CS" 1.1304 46 MnVS 6 46 MnVS 6
FINISHING
1.0574 ZStE 460 / 1.1305 46 MnVS 3 46 MnVS 3
H 460 1.1335 WSt E315 S
1.0585 S 355 J 2 G 3 S 355 J2 G3 1.1337 WSt E 355
Cu / St 52-3 Cu + CR 1.2058 39 Cr 4
Cu3 1.2063 145 Cr 6
1.0587 QSt 52-3 Cu 3 S 355 J2 G3 1.2067 L3 100 Cr 6 BL3 T61203 102 Cr 6 Y 100 C 6 102 Cr
INSERTS
Cu C 6 KU
1.0729 70 S 20 1.2101 62 SiMnCr 4
1.0900 38 Si 6 1.2108 90 CrSi 5 SFVC 2A P 280 GH C 100 KU 2092
1.0901 38 Si 2 1.2109 125 CrSi 5
1.0902 46 Si 7 45 S 7 1.2125 5160 65 MnCr 4 En48 G51600
TECHNICAL DATA
1.0903 9255 51 Si 7 250 A 53 G92550 51 S 7 48 Si 7 2090 1.2127 105 MnCr 4 SUJ 3 100 CrMn 4 KU
1.0904 9255 55 Si 7 250 A 53 SKH 1; G92550 55 NiCrMoV 755 S 7 55 Si 8 2085 1.2129 200 CrMn 8 G 200
SKT 4 CrMn 8
1.0905 38 Si 3 1.2162 21 MnCr 5 SCR 420 H 21 MnCr 5 20 NC 5
1.0906 65 Si 7 250 A 61 1.2203 145 V 12
1.0908 60 SiMn 5 1.2206 O 6 140 CrV 1 T31506 130 C 3
1.0924 65 SiMn 5 1.2208 31 CrV 3 31 Cr V2
1.0961 9262 60 SiCr 7 250 A 61 SUP 7 G92620 60 SiCr 8 60 SC 7 60 SiCr 8 1.2210 L-2 115 CrV 3 T61202 107 Cr V 100 C 3 107 CrV
INDEX
1.0966 QSt E 690 TM S 700 MC S 690 MC S 700 MC 3 KU 3 KU

(S 700 MC) 1.2235 80 CrV 2 T91905 80 Cr V 2
1.0971 QSt E 260 N 7 AE 275 S 260 NC S 260 NCX 1.2236 80 CrV 2 3
S 260 NC NC 1.2241 S6 51 CrMnV 4 T41906 51 CrMnV 4 51 CrMnV
1.0972 QSt E 300 TM / "43 F35 S 315 MC E 315 D S 315 MC 4 KU
S 315 MC HR,HS,CS" 1.2242 59 CrV 4
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
1.2243 61 CrSiV 5 1.2711 54 NiCrMoV 6 55 NCDV 6

1.2248 38 SiCrV 6 1.2713 L6 55 NiCrMoV 6 BH 224/5 SKT 4 T61206 55 NiCrMoV 55 NCDV 7 55 NiCrMoV
1.2249 45 SiCrV 6 7 7 KU
1.2302 35 CrMo 7 35 CrMo 7 1.2714 P5 56 NiCrMoV 7 T51605 56 NiCrMoV 56 NiCrMoV
1.2303 L 7 100 CrMo 5 7 7 KU
COMBINATION
1.2305 102 CrMo 6 1.2718 55 NiCr 10

TOOLS
1.2307 29 CrMoV 9 1.2721 50 NiCr 13 55NCD13

1.2311 P20 40 CrMnMo 7 BP20 35 CrMo 1.2726 26 NiCrMoV 5
8 KU 1.2735 P6 15 NiCr 14 SNC 22 T51606 10 NC 12
1.2312 40 CrMnMoS 40 CMD 8 1.2736 55 CrNiMo 4
86 1.2737 28 NiCrV 5
1.2313 21 CrMo10 1.2738 40 CrMnNiMo 40
CARBIDE TAPS
HSS AND
1.2320 G 60 CrMoV 864 CrMnNiMo

10 7 8-6-4
1.2323 48 CrMoV 67 45 CDV 6 1.2739 40 CrNiMoV
1.2326 G 48 CrMoV 6 7 334
1.2328 45 CrMoV 7 1.2740 28 NiCrMoV 10
1.2329 46 CrSiMoV 7 1.2741 55 CrNiMoVS
1.2330 P-20 35 CrMo 4 BP 20 T51620 4135 35 CrMo 4 424
INDEXABLE
DRILLS
1.2332 4145 47CrMo 4 G41450 4142 1.2742 55 CrNiMoV

1.2333 G 59 CrMoV 424
18 5 1.2743 60 NiCrMoV
1.2334 62 CrMoV 6 12 4
1.2355 50 CrMoV 50 CrMoV 1.2744 57 NiCrMoV 7 7 55 NiCrMoV
COUNTERBORING
13 15 13-15 7
1.2356 60 CrMoV 13 5 1.2745 14 NiCr 18
TOOLS
1.2358 60 CrMoV 18 5 1.2747 28 NiMo 1 7

1.2369 81 MoCrV 1.2762 75 CrMoNiW
42 16 67
1.2382 GX 155 1.2766 35 NiCrMo 16
CrVMo 121 1.2768 25 NiCrMo 12
PRECISION HOLE
1.2414 120 W 4 1.2770 85 NiV 4

FINISHING
1.2419 105 WCr 6 SKS 31 105 WCr 5 (107 WCr 13) 107 WCr 2140 1.2773 75 NiCrMo
5 KU 533
1.2424 75 WCr 12 1.2778 GS-20 MoNi
1.2442 W 5 115 W 8 T72305 33 13
1.2510 O 1 100 MnCrW 4 BO 1 SKS 3 T 31501 (95 MnWCr 90 MWCV 5 95 MnWCr 2140 1.2823 70 Si 7
5) 5 KU 1.2824 70 MnMoCr 8 70 MnMoCr
INSERTS
1.2511 80 WCrV 3 8
1.2515 100 WV 4 SKS 21 1.2825 95 MnWCr 5 95 MnWCr 5
1.2516 A-10 120 WV 4 BF 1 T30110 110 WC 20 110 W 4 KU 1.2826 60 MnSi 4 60 MSC 4
1.2519 110 WCrV 5 1.2833 W 100 V 1 BW 2 SKS 43 T72302 100 V 2 Y1 105 V 102 V 2 KU
1.2521 110 WCrV 8 210
TECHNICAL DATA
1.2542 S1 45 WCrV 7 BS 1 T 41901 45 WCrV 8 45 WCr V 8 45 WCrV 2710 1.2834 105 V 105 V
8 KU 1.2838 145 V 33
1.2549 50 WCrV 8 50WCrV8 1.2840 20 MV 6
1.2550 S1 60 WCrV 7 BS1 60 WCrV 8 55 WC 20 55 WCrV 1.2842 O 2 90 MnCrV 8 BO 2 T31502 90 Mn V 8 90 MV 8 90 MnVCr
8 KU 8 KU
1.2552 80 WCrV 8 1.2851 34 CrAl 6
1.2562 142 WV 13 1.2891 34 CrAlNi 7
1.2603 45 CrVMoW 5 8 1.3501 E 100 Cr 2 G50986 100 C 2
INDEX
1.2604 73 WCrMoV 22 50100

1.2661 38 CrCoWV 38 CrCoWV 1.3503 E 105 Cr 4 G51986
18 17 17 18-17-17 51100
1.2705 80 NiCr 11 1.3505 E 100 Cr 6 535 A 99 SUJ 2 G52986 100 Cr 6 100 C 6 100 Cr 6 2258
1.2708 54 NiCrMoS 6 52100
1.2710 45 NiCr 6 1.3514 101 Cr 6 102 Cr 6 KU
Technical Data
SOLID CARBIDE
DRILLS
Number Number
MODULAR DRILLS
1.3515 20 MnCr 4 2 1.5225 51 MnV 7
1.3518 100 CrMnSi 4 4 1.5231 38 MnSiVS 5
1.3519 100 CrMnSi 6 6 1.5232 27 MnSiVS 6
1.3520 100 CrMn 6 K19195 100 CrMn 6 100 CM 6 1.5233 44 MnSiVS 6
1.3523 19 MnCr 5 1.5243 42 MnSiV 3 3
1.3531 16 CrNiMo 6 820A16 16 NCD 6 16NiCrMo6 1.5309 8 MnTi 4
COMBINATION
TOOLS
1.3532 16 NiCrMo 16 5 1.5402 15 MnMoV 4 5 15 MnMo 15 MDV 4.05
1.3536 100 CrMn 7 3 100 CrMnMo 100 CD 7 V 4-5
7 1.5403 17 MnMoV 6 4 1501-261 SBV 3 K12766
1.3537 100 CrMo 7 SUS 4 K19965 100 CrMo 7 100 CD 7 100CrMo7 1.5407 10 MnMoCrV
1.3539 100 CrMnMo 8 100 CrMnMo 47
8 1.5408 30 MoB 1
CARBIDE TAPS
1.3555 13 MoCrNi 42 1.5419 4419 GS-22 Mo 4 243-430 SCPH 11 G44190 G 20 Mo 5 G20Mo5 G 22 Mo 5
HSS AND
16 14 1.5420 27 MnMo 33 Pb
1.3559 20 Cr 3 1.5421 20 MnMo 3 5 K12121
1.3565 4147 48 CrMo 4 817 M 40 SNC 836 H41470 48 CrMo 4 1.5422 G 18 Mo 5 G18Mo5 G 18 Mo5
1.3566 15 CrMo 4 1.5424 10 MnMo 4 5
1.3567 20 CrMo 4 1.5425 11 MnMo 4 5 K11123 11 MnMo
1.3570 20 MnCrMo 4 2 45 KE
INDEXABLE
DRILLS
1.3576 20 NiCrMo 7 1.5426 13 MnMo 6 5 K11424 11 MnMo
1.4475 GX 150 65 KE
CrNiMoCuN 1.5427 13 MnMo 8 5 K11423 11 MnMo
41 6 2 85 KE
1.4560 X 3 CrNiCu S 124 M PHYHQ 4560 304 RH1 1.5428 13 MnMo 12 5
COUNTERBORING
19 9 2 1.5432 4037 42 MnMo 7 En 16 G40370
1.4700 8 CrSi 7 7 1.5437 70 MoMn 10 4
TOOLS
1.5021 48 Si 7 1.5465 26 MnMoB 6 4
1.5022 38 Si 6 1.5472 6 CuNb 15 5
1.5023 38 Si 7 1.5473 6 Nb 5
1.5024 46 Si 7 45 Si 46 S 7 1.5520 17 MnB 4
1.5025 9259 51 Si 7 50 Si 7 48 Si 7 2090 1.5524 37 MnB 4
PRECISION HOLE
H 1.5526 30 MnB 4
FINISHING
1.5026 55 Si 7 250 A 53 G92550 56 Si 7 55 S 7 55 Si 8 2085 1.5527 40 MnB 4 170 H 41 SWRCHB
1.5027 9260 60 Si 7 251 A 60 G92600 60 Si 7 60 S 7 60 Si 7 437
1.5028 65 Si 7 SUP 7 1.5528 22 MnB 5
1.5067 1335 30 Mn 7 G13350 1.5531 15B 30 Mn B 5 SWRCHB 30 Mn B 5 30 Mn B 5
1.5085 51 Mn 7 28 H 634
1.5086 12 Mn 8 11 Mn 8 KE 1.5532 15B 38 Mn B 5 SWRCHB 38 Mn B 5 38 Mn B 5 38 MnB 5
INSERTS
1.5094 38 MnS 6 38 MnS 6 37 H 737
1.5111 9 MnSi 5 1.5535 23 MnB 4
1.5112 10 MnSi 5 9 MnSi 53 KE 1.5536 27 MnB 4
1.5120 38 MnSi 4 1.5538 37 MnB 5
1.5121 46 MnSi 4 1.5622 A 350 14 Ni 6 SL2N26 K22103 FeE 285 Ni 6 15 N 6 14 Ni 6
1.5122 37 MnSi 5 38 MS 5 -LF 5
TECHNICAL DATA
F.130.A 1.5634 75 Ni 8
1.5125 11 Mn Si 6 10 MN Si 63 1.5639 A2317 16 Ni 14 SHY 70 K31918 3.5 Ni
KE 1.5710 3135 36 NiCr 6 640 A 35 SNC 236 K22033 30 NC 6
1.5126 12 MnSi 5 1.5714 16 NiCr 4 16 NiCr 4 16 NiCr 4 16 NiCr 4
1.5128 10 MnSi 44 1.5715 16 NiCrS 4 16NiCrS4 16 NiCrS 4 16 NiCrS 4
1.5130 10 MN Si 7 10 Mn Si 74 1.5732 3415 14 NiCr 10 SNC 415 H 14 NC 12 16
KE NiCr 11
INDEX
1.5142 60 SiMn 5 1.5733 14 NiCrPb 10

1.5213 15 MnV 5 1.5736 3435 36 NiCr 1 0 SNC 30 NC 11 35 NiCr 9
1.5216 17 MnV 6 631 H
1.5217 20 MnV 6 K02304 1.5737 30 NiCr 11 30NC12
1.5218 22 MnV 6 1.5752 E 14 NiCr 14 655 M 13 SNC G33106 13 NiCr 12 16 NC 11 16 NiCr 11
1.5219 41 MnVS 5
1.5223 42 MnV 7
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
3310 815 H 1.6582 4340 34 CrNiMo 6 817 M 40 SNCM G43370 34 CrNiMo 6 35 NCD 6 35 NiCrMo 2541
1.5755 31 NiCr 14 653 M 31 SNC 836 18 NC 13 447 6 KB
1.5807 15NiCr 6 4 1.6583 35 CrNiMo 6
1.5808 26 NiCr 64 1.6585 29 CrNiMo 8
1.5815 36 NiCr 6 4 1.6586 31 CrNiMo 8 K23550
1.5860 14 NiCr 18 1.6587 17 CrNiMo 6 820 A 16 SNCM 17 CrNiMo 7 18 NCD 6 18 NiCrMo 2523
COMBINATION
TOOLS
1.5918 17 CrNi 6 6 17 CrNi 6-6 17 CrNi 6-6 16 CN 6 815 7

1.5919 15 CrNi 6 S107 SNCM H43200 14 CrNi 6 16 NC 6 16 CrNi 4 1.6589 34 CrNiMo 6 S
420 1.6655 32 NiCrMo 12 5 K34035 30 NCD 12
1.5920 18 CrNi 8 20 NC 6 1.6658 15NiCrMo
1.6211 16 MnNi 6 3 10-6
1.6213 12 MnNi 6 3 FeE 285 Ni 2 1.6723 15 NiCrMo 16 5 835 M 15 15 NiCrMo
CARBIDE TAPS
1.6215 9 MnNi 4 16-5

HSS AND
1.6216 17 MnNi 4 1.6732 28 NiCrMo 5 5

1.6218 9 MnNi 6 1.6738 40 NiCrMo 18 6
1.6222 9 NiMn 5 K10940 1.6739 30 NiCrMo 9 5
1.6223 11 NiMn 84 1.6743 32 NiCrMo 10 4 826 M 31
1.6225 11 NiMn 54 1.6745 40 NiMoCr 10 5 4S.99
1.6227 11 NiMn 9 4 K21010 1.6746 32 NiCrMo 14 5 830 M 31 35 NCD 14
INDEXABLE
DRILLS
1.6310 20 MnMoNi 5 5 18 MND 5 1.6747 30 NiCrMo 16 6 35 NCD 16

1.6341 11 NiMoV 5 3 1.6752 22 NiMoCr 67
1.6342 12 MnNiMoV 1.6755 4718 22 NiMoCr 4 7 G47180
54 1.6757 20 NiMoCr 6 5
1.6343 12 MnNiMo 5 5 1.6758 23 MnNiMoCr
COUNTERBORING
1.6347 26 NiMoV 14 4 54
1.6348 20 NiMoV 14 5 1.6782 16 NiCrMO 16 NCD 13
TOOLS
1.6368 15 NiCuMoNb 5 3604-591 SBV 2 K12039 12 6

1.6369 15 NiCuMoNb 1.6785 3 NiMoCr 12 20
5S 1.6918 15 MnNiMoV
1.6511 9840 36 CrNiMo 4 816 M 40 G98400 36 CrNiMo 4 40 NCD 3 38 NiCrMo 53
4 KB 1.6919 11 NiMnCrMo
PRECISION HOLE
1.6513 28 NiCrMo 4 55
FINISHING
1.6522 20 NiCrMo 2 605 M 36 20 NiCrMo 2 1.6920 15 MnCrMoNiV 15

1.6523 8620 21 NiCrMo 2 805 M 20 SNCM G86200 20 NiCrMo 20 NCD 2 20 NiCrMo 2506 53 MnCrMoNiV
220 H 2 KD 2 5-3
1.6526 20 NiCrMoS 20 NiCrMoS 20 NiCrMoS 1.6932 28 NiCrMoV 8 5 28 NiCrMoV
22 2-2 2-2 8-5
1.6527 20 NiCrMo 3 1.6935 35 CrNiMoV 8
INSERTS
1.6540 23 MnNiCrMo 1.6946 30 CrMoNiV

53 5.11 V
1.6542 24 MnNiCrMo 1.6947 30 NiCrMo 14 5
62 1.6948 26 NiCrMoV
1.6543 8622 21 NiCrMo 2 2 805A20 SNCM G86220 20 NiCrMo 22 NCD 2 2506 11 5
2 KD 220 H 1.6949 35 NiCrMoV 30NiCrMoV
TECHNICAL DATA
1.6545 8630 27 CrNiMo 2 G86300 30 NiCrMo 2 30 NCD 2 30 NiCrMo 2 11 5 12

KD KB 1.6950 20 NiCrMoV
1.6546 8640 40 NiCrMo 7 SNCM G86400 40 NiCrMo 40 NCD 2 4 0NiCrMo 14 6
2 KB 240 2 KD 2 KB 1.6951 32 NiCrMoV
1.6562 E4340 40 NiCrMo 7 817 M 40 G43406 40NiCrMo7 14 5
1.6563 41 NiCrMo 41NiCrMo 41NiCrMo 1.6953 26 NiCrMo 14 5 25NCD15
732 7-3-2 7-3-2 1.6955 32 NiCrMoV 10
INDEX
1.6565 4340 40 NiCrMo 6 818M40 SNCM G43400 1.6956 33 NiCrMoV 33 NiCrMoV 30 NCD 15
349 14 5 14-5
1.6571 20 NiCrMoS 6 4 20 NiCrMoS 20 NiCrMoS 1.6957 26 NiCrMoV
6-4 6-4 14 5
1.6580 30 CrNiMo 8 823 M 30 SNCM 30 CrNiMo 30 CND 8 30 NiCrMo 3524 1.6959 35 NiCrMoV
431 8 KD 8 12 5
1.6581 32 NiCrMo 8 5 1.6971 79 Ni 1
Technical Data
SOLID CARBIDE
DRILLS
Number Number
MODULAR DRILLS
1.6972 83 Ni 1 1.7148 30 MnCrB 4 2
1.7001 38 Cr 1 38 Cr 1 KB 1.7149 20 MnCrS 5 20 MnCrS 5
1.7002 46 Cr 1 1.7160 16 MnCrB 5 16MnCrB5 16MnCrB5 16MnCrB5
1.7003 50 38 Cr 2 120 M 36 SMn 438 G50401 38 Cr 2 KD 38 C 2 38 Cr 2 1.7162 17 MnCrB 5 5
B40 1.7176 5155 55 Cr 3 527 A 60 SUP 9 (A) G51550 55 Cr 3 55 C 3 55 Cr 3 2253
1.7005 45 Cr 2 45 Cr 2 45 Cr 2 1.7182 27 MnCrB 5 2 27 MnCrB 5-2 27 MnCrB 5-2
COMBINATION
TOOLS
1.7006 5045 46 Cr 2 605 M 36 SMn 443 H51500 46 Cr 2 KD 42 C 2 45 Cr 2 27 MnCrB 5-2
1.7007 50 37 CrB 1 120 M 36 SMnC 3 H H50401 38 Cr 2 35 CB 1 1.7185 33 MnCrB 5 2 33 MnCrB 5-2 32MCB5 33
B40 MnCrB 5-2
1.7012 13 Cr 2 1.7186 20 MnCr B5
1.7014 17 CrS 3 17 CrS3 17 CrS 3 17 CrS 3 1.7189 39 MnCrB 6 2 39 MnCrB 6-2 39 MnCrB 6-2
1.7017 60 Cr 3 39 MnCrB 6-2
CARBIDE TAPS
1.7020 32 Cr 2 1.7190 35 CrSi 84
HSS AND
1.7021 32 CrS 2 1.7213 25 CrMoS 4 25 CrMoS 4 25 CrMoS 4 25 CD 4u 25 CrMoS 4
1.7023 38 CrS 2 38 CrS 2 38 CrS 2 38 C 2u 38 CrS 2 1.7214 25 CrMo 4 25 CrMo 4 F
1.7025 46 CrS 2 46 CrS 2 46 CrS 2 46 CrS 2 46 CrS 2 46 CrS 2 1.7217 25 CrMoPb 4
1.7027 20 Cr 4 1.7218 4130 25 CrMo 4 708 A 25 SCM 420 G41300 25 CrMo 4 KD 25 CD 4 25 CrMo 4 (KB) 2225
1.7028 20 CrS 4 1.7219 26 CrMo 4 K13047
1.7030 5130 28 Cr 4 530 A 30 G51300 28 Cr 4 30 CD 4 1.7220 4137 34CrMo4 708 A 37 SCM 435 H H41350 34 CrMo 4 KD 35 CD 4 35
INDEXABLE
DRILLS
1.7033 5130 34 Cr 4 530 A 32 SCr 430 G51300 34 Cr 4 KD 32 C 4 34 Cr 4 KB CrMo 4 2234
H H 1.7222 42 CrMoPb 4
1.7034 5132 37 Cr 4 530 A 36 SCr 435 G51320 37 Cr 4 38 C 4 36 CrMn 4 1.7223 4142 41 CrMo 4 708 M 40 SCM 440 G41420 41 CrMo 4 42 CD 4 TS 41 CrMo 4 2244
H H 1.7225 4140 42 CrMo 4 708 A 42 SCM 440 G41400 42 CrMo 4 42 CD 4 42 CrMo 4 2244
1.7035 5140 41 Cr 4 530 M 40 SCr 440 G51400 41 Cr 4 42 C 4 41 Cr 4 H
COUNTERBORING
H 1.7226 34 CrMoS 4 708 A 37 34 CrMoS 4 34 CD 34 CrMoS 4 2234
1.7036 28 CrS 4 28CrS4 28CrS4 1.7227 42 CrMoS 4 708 H 42 42 CrMoS 4 42 CD 42 CrMoS 4 2244
TOOLS
1.7037 34 CrS 4 34 CrS 4 34 CrS 4 34 CrS 4 34 CrS 4 1.7228 4150 50 CrMo 4 708 A 47 SCM 445 G41500 50 CrMo 4 50 CrMo 4
1.7038 5135 37 CrS 4 37 CrS 4 37 CrS 4 38 C 4 u 37 CrS 4 0H
1.7039 41 CrS 4 41 CrS 4 41 CrS 4 41 CrS 4 41 CrS 4 2245 1.7233 42 CrMo 5 6 42CrMo5-6 42CrMo5-6
1.7043 38 Cr 4 38 Cr 4 38 Cr 4 1.7243 18 CrMo 4 18CrMo4 SCM 418 18CrMo4 18CD4 18 CrMo 4
1.7045 5140 42 Cr 4 530 A 40 SCr 440 40 NiCrMo 3 42 C 4 TS 40 NiCrMo 2245 1.7244 18 CrMoS 4 18CrMoS4 18CrMoS4 18CrMoS4
PRECISION HOLE
3 1.7255 23 CrMo 5
FINISHING
1.7072 36 CrB 2 1.7262 15 CrMo 5 SCM 415 12 CD 4
1.7075 46 CrB 2 H
1.7076 32 CrB 4 1.7264 20 CrMo 5 SCM 421 18 CD 4
1.7077 36 CrB 4 1.7271 23 CrMoB 3 3
1.7102 54 SiCr 6 54 SC 6 1.7272 31 CrMoB 2 1
1.7103 67 SiCr 5 67 SiCr 5 67 SiCr 5 1.7305 12 CrMo 11 10
INSERTS
1.7104 55 SiCr 6 3 1.7311 20 CrMo 2
1.7105 65 SiCr 5 2 1.7315 37 CrMo 3
1.7106 55 SiCr 7 1.7319 20 MoCrS 3 20 MoCrS 3 20 MoCrS 3
1.7107 65 SiCr 7 1.7320 20 MoCr 3 20 MoCr 3 20 MoCr 3
1.7108 9262 60 SiCr 7 60 SiCr 8 1.7321 20 MoCr 4 SCM 21 20 MoCr 4
1.7116 42 MnNiCrB H
TECHNICAL DATA
43 1.7323 20 MoCrS 4 20 MoCrS 4
1.7117 52 SiCrNi 5 52 SCN 5 1.7325 25 MoCr 4 20 NiCrMo
1.7121 20 CrMnS 3 3 2
1.7131 5115 16 MnCr 5 527 M 17 SCR 415 G 51150 16 MnCr 16 MC 5 16 MnCr 5 2173 1.7326 25 MoCrS 4
5 KD 1.7335 A182 13 CrMo 4 4 1501-621 SFVA F K11562 13 CrMo 4-5 15 CD 4.05 14 CrMo 2216
1.7135 8 MnCrB 3 -F11 12 45
1.7137 60 MnCrB 3 1.7339 11 CrMo 5 5 K22094
INDEX
1.7138 50 B 52 MnCrB 3 SUP 11 H50501 1.7340 UP S4 CrMo 1

50 H 1.7341 GS-34 CrMo
1.7139 16 MnCrS 5 44
1.7146 20 MnCrPb 5 1.7346 11 CrMo 4 5
1.7147 5120 20 MnCr 5 SMnC G51200 20 MnCr 5 20 MC 5 20 MnCr 5 1.7356 7 CrMo 7 5
420 H
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
1.7357 GS-17 CrMo 55 B 2 SCPH 21 J11872 G 17 CrMo G17CrMo5-5 G 15 CrMo 1.8506 34 CrAlS 5 K23745
55 55 1.8507 A 355 34 CrAlMo 5 905 M 31 K23510 (34 30 CAD 6.12 34 CrAlMo
1.7360 31 CrMo 12 5 Cl.D CrAlMo 5) 7
1.7361 32 CrMo 12 722 M 24 32 CrMo 12 30 CD 12 32 CrMo 12 2240 1.8509 E 41 CrAlMo 7 905 M 39 SACM J24056 41 CrAlMo 7 40 CAD 6. 12 41 CrAlMo 2940
1.7363 GS-12 CrMo SCPH 61 J42045 GX 12 71400 645 7
COMBINATION
19 5 CrMo 5 1.8515 31 CrMo 12 722 M 24 31 CrMo 12 30 CD 12 31 CrMo 12 2240

TOOLS
1.7379 GS-18 CrMo SCPH 32 G 17 CrMo 1.8519 31 CrMoV 9 K42544 31 CrMoV 9 31 CrMoV
9 10 9 10 10
1.7380 A182 10 CrMo 9 10 1502-622 SCMV 4 J21890 10 CrMo 10 CD 9.10 12 CrMo 2218 1.8521 15 CrMoV 59
-F22 9 10 9 10 1.8523 39 CrMoV 13 9 897 M 39 39 CrMoV 36 CrMoV
1.7383 11 CrMo 9 10 11 CrMo SCMV 4 11 CrMo 10 CD 9.10 11 CrMo 13 9 13 9
9-10 9-10 9-10 1.8550 34 CrAlNi 7 K52440 34 CrAlMo 5
CARBIDE TAPS
HSS AND
1.7384 7 CrM0 11 10 A 33 1.8564 4S.106

1.7385 6 CrMo 9 10 1.8599 8 CrMo 16
1.7386 X 12 CrMo 9 1 629-590 STFA 26 S50488 X 10 1.8701 20 MnCr 5 3
CrMoVNb 9-1 1.8702 21 MnCr 5 4
1.7389 GX 12 CrMo 1.8706 21 MnCr 7 5
101 1.8708 20 MnCrNiMo
1.7503 67 Cr V22 63
INDEXABLE
DRILLS
1.7700 100 HLES 1.8715 17 MnCr 5 3

1.7706 GS-17 CrMoV SCPH 23 J21610 G 17 CrMoV G17CrMoV G 17 CrMoV 1.8716 16 MnCrMo 3 2
5 11 5 10 5-10 5 10 1.8717 16 MnCrMo 4 3
1.7707 30 CrMo V9 30 CrMoV 9 1.8719 15 MnCrMo 3 2
1.7711 40 CrMoV 47 1506-670- SNB 21- K14072 40 CrMoV 42 CDV 4 1.8720 18 MnCr 5 3
COUNTERBORING
860 1-5 4-6 1.8721 26 MnCr 6 3

1.7715 14 MoV 6 3 1503-660- K11591 14 MoV 6-3 1.8722 24 MnCr 5 5
TOOLS
460 1.8734 28 MnCr 4 3

1.7720 G 12 MoCrV 5 2 G 12 MoCrV G12MoCrV5-2 G12MoCrV 1.8807 13 MnNiMo 5 4
5-2 5-2 1.8812 18 MnMoV 5 2 SG 30 K12003
1.7725 GS-30 CrMoV 1.8815 18 MnMoV 6 3 591
64 1.8818 PS 275 TM S 275 M S 275 M S 275 M S 275 M
PRECISION HOLE
1.7733 24 CrMoV 5 5 20 CDV 6 24 CrMoV 1.8823 DI-MC 355 B S 355 M E 355 S 355 M
FINISHING
55 1.8825 DI-MC 420 B S 420 M S 420 M E 420 S 420 M

1.7734 15 CrMoV 6 1.8827 S 460 M S 460 M S 460 M E460;S460M S460M
1.7735 14 CrMoV 6 9 1.8834 BTStE 355 TM S 355 ML S 355 ML E 355 S 355 ML
1.7737 45 CrMoV 6 7 45 CDV 4 1.8836 BTStE 420 TM S 420 Ml S 420 ML E 420 S 420 ML
1.7741 42 CrMoV 73 1.8863 54SICR7
1.7745 15 CrMoV 5 10 1.8886 14 MnTi 5
INSERTS
1.7755 GS-45 CrMoV 1.8900 St E 380 SM 50 B S 380 N Fe E 390 KG

10 4 1.8902 A 633 Gr. E St E 420 S 420 N SM 50 C K02002 FeE 420 KGN E 420-I Fe E
1.7756 GS-36 CrMoV G 36 CrMoV 420 KG 2143
104 10 4 1.8904 S 550 Q S 550 Q E 550 S 550 Q
1.7792 580 CrM0V 4 1.8905 A 633 St E 460 P 460 N SM 53 B K02900 P 460 N E 460-I Fe E 460 KG 2143
TECHNICAL DATA
1.8062 46 SiCrMo 6 3 45 SCD 6 Gr. E

1.8070 21 CrMoV 5 11 21 CrMoV 1.8906 BGH 8906 55 F S 460 QL S 460 QL S 460 QL
5 11 1.8907 St E 500 SM 58 K02001
1.8075 10 CrSiMoV 7 1.8910 TStE 380 / S 380 NL Fe E 390 KT 2117
1.8150 67 CrV 2 S380NL
1.8159 6150 50 CrV 4 735 A 50 SUP 10 G61500 51 CrV 4 50 CV 4 50 CrV 4 2230 1.8911 EStE 380 /
1.8161 58 CrV 4 S380NL1
1.8212 21 CrVMoW 12 1.8912 S 420 NL / S 420 NL STK 540 K02002 S 420 NL E 420 T-I Fe E 420 KT
INDEX
1.8401 5130 30 MnCrTi 4 En18A G51300 28 C 4 TStE 420

1.8404 5150 60 MnCrTi 4 BW 2 G51500 1.8913 EStE 420 / STK 540
1.8405 70 MnCrTi 8 S420NL1
1.8425 110 MnCrTi 8 1.8914 S 620 Q S 620 Q E 620 S 620 Q
1.8500 100 HLES 1.8915 T St E 460 / P 460 NL 1 K02900 P 460 NL1 E 460 T-I Fe E 460 KT
1.8504 34 CrAl 6 P460NL1
Technical Data
SOLID CARBIDE
DRILLS
Number Number
MODULAR DRILLS
1.8916 S 460 QL1 55 F S 460 QL 1
1.8917 T St E 500 K02001 E 500 T-I P420NH KW
1.8918 EStE 460 / P 460 NL 2 P 460 NL 2 P 460 NL 2 P 460 NL 2 1.8935 WSt E 460 / P 460 NH K02900 P 460 NH P 460 NH Fe E 460
P460Nl2 P460NH KW
1.8919 EStE 500 / S 500 NL 1 1.8936 P420 QH P 420 QH
COMBINATION
S500NL1 1.8937 WSt E 500 / K02001
TOOLS
1.8920 TStE 690 VA / S 690 G 1 QL P500NH
S690G1QL 1.8938 TStE 770 V / S 770 QL
1.8921 TStE 690 VB / K11646 S 690 G 2 QL S770QL
S690G2QL 1.8939 EStE 790 V / S 790 QL 1
1.8922 S 690 G 4 QL / S 690 G 4 QL S790QL1
TStE 690 VC 1.8940 S 890 Q S 890 Q S 890 Q S 890 Q
CARBIDE TAPS
HSS AND
1.8923 S 590 QL / S 590 QL 1.8941 S 960 Q S 960 Q E 960 T-II S 960 Q
TStE 590 V 1.8944 S 550 G 1 QL 1 S 550 G 1
1.8924 S 500 Q S 500 Q E 500 S 500 Q 2614 / EStE 550 VA QL 1
( StE 500 V ) 1.8954 EStE620VA / S 620 G
1.8925 S 890 QL 1 S 890 QL 1 S 620 G 1 QL 1 1 QL 1
( EStE 90 V ) 1.8964 EStE 690 VA S 690 G1
1.8928 S 690 QL SHY 685 S 690 QL QL1
INDEXABLE
DRILLS
( TStE 690 V) NS 1.8969 QStE 600 TM / S 600 MC E 620 D S 600 MC
1.8929 TStE 690 VD / S 690 G 3 QL S 600 MC
1.8930 WSt E 380 / P 380 NH Fe E 390 2116 1.8974 S 700 MC S 700 MC E 690 D S 700 MC
P380Nh KW (QStE 690 TM)
1.8931 S 690 Q / SHY 685 S 690 Q E 690 S 690 Q 1.8976 S 650 MC S 650 MC E 620 D S 650 MC
COUNTERBORING
StE 690 V N (QStE 650 TM )
1.8932 WSt E 420 / S 420 NL STK 540 K02002 S 420 NL S 420 NL Fe E 420 1.8981 17 MnCrTi 6
TOOLS
1.8989 22 MnCrMoV 6
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
SOLID CARBIDE
DRILLS

P5 Ferritic, Martensitic, and PH Stainless Steels Content: C = 0-.4% Tensile Strength RM (MPa)*: 600-850 Hardness (HB): < 330
Number Number
MODULAR DRILLS
1.3542 X 65 Cr 14 1.4117 X 38 CrMoV 15

1.3811 X 10 Cr 25 1.4119 X 15 CrMo 13
1.3936 X 2 NiCoTiNb 1.4120 X 20 CrMo 13 Z 20 CD 14
42 3 2 1.4121 X 22 CrMoNiS
1.3937 X 68 13 1
COMBINATION
NiMnCrVNb 1.4122 X 35 CrMo 17 X 39 CrMo X39CrMo17-1 X 35 CrMo

TOOLS
12 5 17 1 17
1.3950 GX 5 CrNiMo 1.4125 440 C X 105 CrMo 17 SUS 440 S44004 X 105 CrMo Z 100 CD 17 X 105 CrMo
18 15 C 17 17
1.4000 403 X 6 Cr 13 403 S 17 SUS 403 S 40300 X 6 Cr 13 Z 6 C 13 X 6 Cr 13 2301 1.4136 GX 70 CrMo Z 60 CD x
1.4001 410 S X 7 Cr 14 29 2 29 2
1.4002 405 X 6 CrAl 13 405 S 17 SUS 405 S 40500 X 6 CrAl 13 Z 6 CA 13 X 6 CrAl 13 2302 1.4138 GX 120 CrMo
CARBIDE TAPS
HSS AND
1.4005 416 X 12 CrS 1 3 416 S 21 SUS 416 S 41600 X 12 CrS 13 Z 12 CF 13 X 12 CrS 13 2380 29 2
1.4006 410 X 10 Cr 13 410 S 21 SUS 410 S 41000 (X 12 Cr Z 12 C 13 X 12 Cr 13 2302 1.4302 X 5 CrNi 19 9 308 S 96 S30888 X 6CrNi 20
13 KD) 10 KE
1.4007 X 35 Cr 1 4 1.4305 303 X 10 CrNiS 18 9 303 S 21 SUS 303 S30300 X 10 CrNiS Z 10 CNF X 10 CrNiS 2346
1.4008 414 GX 8 CrNi 1 3 410 C 21 SCS 1 S41400 GX 7 CrNiMo Z 12 CN 13 M GX 12 Cr 13 18 9 18.09 18 09
12-1 1.4306 304 L X 2 CrNi 19 11 304 C 12 SUS 304 S30403 (X 3 CrNi18 Z 2 CN 18.09 GX 2 CrNi 2352
1.4011 GX 12 Cr 1 2 GX12Cr12 GX12Cr12 L 10 KD) 19 10
INDEXABLE
DRILLS
1.4014 N 3 2 0 (LW) 1.4309 GX 2 CrNi 19 11 304 C 12 J92500 GX2CrNi GX2CrNi19-11 GX2CrNi

1.4016 430 X 6 Cr 17 430 S 15 SUS 430 S 43000 X 8 Cr 17 Z 8 C 17 X 8 Cr 17 2320 19-11 19-11
KD 1.4313 CA 6 X 5 CrNi 134 425 C 11 SCS 5 J91540 X 3 CrNiMo Z 4 CDN 13.4 X 6 CrNi 2385
1.4021 420 X 20 Cr 13 420 S 37 SUS 420 S 42000 X 20 Cr 13 Z 20 C 13 X 20 Cr 13 2303 -NM 13 4 13 04
J1 1.4316 X 2 CrNi 19 9 308 S 92 SUS Y S30883 X 2 CrNi 20 Z 2 CN 20.10
COUNTERBORING
1.4024 X 15 Cr 13 420 S 29 SUS 410 J91201 X 15 Cr 13 Z 12 C 13 M X 12 Cr 13 308L 10 KE

J1 1.4319 X 3 CrNiN 17 8 302 S 26 SUS 302 S20200 X 10 CrNi
TOOLS
1.4027 GX 20 Cr 1 4 420 C 29 SCS 2 Z 20 C 13 M 18 09

1.4028 420 X 30 Cr 13 420 S 45 SUS 420 J91153 X 30 Cr 13 Z 30 C 13 X 30 Cr 13 2304 1.4321 X 2 NiCr 18 16 Z 3 CDT
J2 18-02
1.4029 416 X 29 CrS 13 416 S 37 SUS 416 X 29 CrS 13 Z29CF13 X 29 CrS 13 1.4332 X 2 CrNi 24 12 309 S 93 X 2 CrNi 24 Z 2 CN 24-14
1.4031 420 X 40 Cr 13 SUS 420 S42080 X 40 Cr 13 Z 40 C 14 X 40 Cr 14 2304 13 KE
PRECISION HOLE
1.4337 X 10 CrNi 30 9 312 S 94 X 12 CrNi 30 Z 10 CN

FINISHING
1.4034 420 X 45 Cr 13 (420 S45) X 45 Cr 13 Z 40 C 14 X 40 Cr 14 09 KE 31-10

1.4057 431 X 19 CrNi 17 2 431 S 29 SUS 431 S 43100 X 19 CrNi Z 15 CN 16.02 X 16 CrNi 2321 1.4340 GX 40 CrNi J92615 GX 35 CrNi
17 2 16 27 4 28 05
1.4059 GX 22 CrNi 17 ANC 2 J91803 Z 20 CN 1.4347 GX 6 CrNiN 26 7 GX 6 CrNiN
17.2 M 26-7
1.4085 GX 70 Cr 29 1.4351 X 3 CrNi 13 4 S41086 X 3 CrNi 14
INSERTS
1.4086 GX 120 Cr 29 425 C 11 04 KE

1.4104 430 F X 12 CrMoS 17 441 S 29 SUS 430 S 43020 X 14 CrMoS Z 10 CF 17 X 10 CrS 17 2383 1.4370 X 15 CrNiMn 307 S 98 X 15 CrNiMn Z 8 CNM
F 17 18 8 18 08 KE 19-09-07
1.4105 430 X 4 CrMoS 18 SUS 430 X 6 CrMoS Z 6 CDF 18 - 1.4403 X 5 CrNiMo S30882
F 17 02 19 11
TECHNICAL DATA
1.4106 X 10 CrMo 13 J91151 1.4405 GX 5 CrNiMo GX 4 CrNiMo GX4CrNiMo GX4

1.4107 GX 8 CrNi 1 2 GX 8 CrNi 12 GX8CrNi 12 G X 8 CrNi 12 16 5 16-5-1 16-5-1 CrNiMo
1.4109 440A X 65 CrMo 14 SUS 440 S44002 X 70 CrMo Z 70 CD 14 16-5-1
A 15 1.4407 GX 5 CrNiMo J91550 Z 6 CND
1.4110 X 55 CrMo 14 Z 50 CD 13 13 4 16-05-01
1.4111 X 110 CrMoV SUS 430 Z 4 CN b 17 X 6 CrNb 17 1.4409 GX 2 CrNiMo GX 2 CrNiMo GX 2 CrNiMo GX 2
15 LX 19 11 2 19-11-2 19-11-2 CrNiMo
1.4112 440 B X 90 CrMoV 18 409 S 1 9 SUS 440 S44003 X 90 CrMoV Z 3 CT 1 2 X 6 Cr Ti 1 2 19-11-2
INDEX
B 18 1.4416 ERO 4416 GX 2 GX2NiCrMoN

1.4113 434 X 6 CrMo 17 1 434 S 17 SUS 434 S43400 (X 8 Z 8 CD 17.01 X 8 CrMo 2325 AHCRMo NiCrMoN 25-20-5
CrMo 17) 17 25-20-5
1.4115 X 20 CrMo 17 1 1.4417 S X 2 CrNiMoSi S39215 GX 2 GX 2 2376
1.4116 X 45 CrMoV 15 X 50 CrMoV Z 50 CD 15 X 50 CrMo 31500 19 5 CrNiMoN CrNiMoN
15 V 15 25-7-3 25-7-3
Technical Data
SOLID CARBIDE
DRILLS
Number Number
MODULAR DRILLS
1.4418 X 4 CrNiMo X 4 CrNiMo Z 6 CND 2387 1.4531 GX 2
16 51 16 5 1 16.05.01 NiCrMoCuN
1.4419 X 38 CrMo 14 2018
1.4420 X 5 CrNiMo 315 S 16 2340| 1.4535 X 90 CrCoMoV
18 11 17
COMBINATION
1.4430 X 2 CrNiMo 316 S 93 S31683 x 2 CrNiMo Z 2 CND 1.4536 GX 2 J94650 GX 2
TOOLS
19 12 19 13 03 KE 19-12-03 NiCrMoCuN CrNiMoCuN
1.4437 GX 6 CrNiMo 317 C 12 25 20 25-20-6
18 12 1.4543 X 3 CrNiCuTi X 6 CrNiNb
1.4440 X 2 CrNiMo S31780 12 9 18 11
18 16 5 1.4551 X 5 CrNiNb SUS Y S34780 X 5 CrNiNb Z 6 CNNb
1.4446 GX 2 CrNiMoN GX 2 19 9 347 20 10 KE 20-10
CARBIDE TAPS
HSS AND
17 1 3 4 CrNiMoN 1.4557 GX 2 GX 2 GX 2
17 1 3 4 CrNiMoCuN CrNiMoCuN CrNiMoCuN
1.4448 GX 6 CrNiMo 317 C 16 J93000 20 18 6 20-18-6 20-18-6
17 13 1.4567 X 3 CrNiCu 394 S 17 SUS XM7 X3CrNiCu 304CU 304K
1.4449 317 X 5 CrNiMo 317 S 16 SUS 317 S31700 X 5 CrNiMo 18 9 4 18-9-4
17 13 18 15 1.4576 X 5 CrNiMoNb 318 S 96 S31980 X 5 Z 4 CNDSNb
1.4452 X 5 CrNiCuNb Z7CNU16.04 19 12 CrNiMoNb 19-12-03
INDEXABLE
DRILLS
16 4 19 12 03 KE
1.4455 X2 X2 1.4584 GX 2 GX 2 GX 2
CrNiMnMoN CrNiMnMoN NiCrMoCu NiCrMoCu NiCrMoCu
20 16 20 15 08 KE 25 2 0 5 25-20-5 25-20-5
1.4458 GX 2 NiCrMo GX 2 NiCrMo GX 2 NiCrMo GX 2 NiCrMo 1.4587 GX 2 GX 2 GX 2
COUNTERBORING
28 20 2 28-20-2 28-20-2 28-20-2 NiCrMoCuN NiCrMoCuN NiCrMoCuN
1.4463 GX 6 CrNiMo 29 25 5 29-25-5 29-25-5
TOOLS
24 8 2 1.4588 GX 2 GX 2 GX 2
1.4468 GX 2 CrNiMoN GX 2 GX 2 CrNiMoN NiCrMoCuN NiCrMoCuN NiCrMoCuN
25 6 3 CrNiMoN 25-6-3 25 20 6 25-20-6 25-20-6
25-6-3 1.4650 X 2 CrNiCu X 2 CrNiCu TX 304L
1.4469 GX 2 CrNiMoN J93404 GX 2 GX 2 CrNiMoN GX 2 19 10 19-10
PRECISION HOLE
26 7 4 CrNiMoN 26-7-4 CrNiMoN 1.4651 X 6 CrNiCuS
FINISHING
26-7-4 26-7-4 18 9 4
1.4470 GX 2 CrNiMoN GX 2 GX 2 CrNiMoN GX 2 1.4724 H-12 X 10 CrAl 13 BH 12 SUS 405 T20812 X 10 CrAl 13 Z 10 C 13 X 10 CrAl 12
22 5 3 CrNiMoN 22-5-3 CrNiMoN 1.4729 GX 40 CrSi 13 SCH 1 GX 35 Cr 13
22-5-3 22-5-3 1.4740 GX 40 CrSi 17 GX 35 Cr 17
1.4502 X 8 CrTi 18 X 6 Cr 18 KE 1.4742 430 X 10 CrAl 18 (430 S 15) SUH 21 S43000 Z 10 CAS 18 (X 8 Cr 17)
1.4505 X5 1.4745 GX 40 CrSi 23
INSERTS
NiCrMoCuNb 1.4747 HNV X 80 CrNiSi 20 443 S 65 SUH 4 S65006 X 80 Z 80 CSN X 80
20 18 6 CrNiSi 20 20.02 CrSiNi 20
1.4510 430 X 6 CrTi 17 SUS 430 S 43036 X 8 CrTi 1 7 Z 8 CT 1 7 X 6 CrTi 17 1.4762 446 X 10 CrAl 25 SUH 442 S44600 X 10 CrAl 24 Z 10 CAS 24 X 16 Cr 26 2322
Ti LX 1.4776 GX 40 CrSi 29 452 C 11 SCH 2 J92605 GX 35 Cr 28
1.4511 430 X 6 CrNb 17 SUS 430 X 3 CrNb 17 Z 8 CNb 17 X 6 CrNb 17 1.4871 EV 8 X 53 CrMnNiN 349 S 54 SUH 35 S63008 X 53 Z 52 X 53
TECHNICAL DATA
Nb LX 21 9 CrMnNiNS CMN 21.09 CrMnNiN
1.4512 409 X 6 CrTi 12 409 S 19 SUH 409 S40900 X 5 CrTi 12 Z 6 CT 12 X 6 CrTi 12 21 - 9 21 9
1.4514 S15789 1.4882 X 50 X 50 Z 50
1.4517 GX 2 GX 2 GX 2 GX 2 CrMnNiNbN CrMnNiNbN CMNNb 21.09
CrNiMoCuN CrNiMoCuN CrNiMoCuN CrNiMoCuN 21 9 21-9
25 6 3 3 25-6-3-3 25-6-3-3 25-6-3-3 1.4923 X 22 CrMoV 762 X 22 CrMoV Z 21 CDV 12 X 22 CrMoV
1.4519 X 2 CrNiMoCu 904 S 92 12 1 12-1 121
20 25 1.4931 GX 22 CrMoV G-X 22 GX23CrMoV G X 23
INDEX
1.4520 X 2 CrTi 17 SUS 430 X 2 CrTi 17 F 20T X 2 CrTi 17 12 1 CrMoV 12 1 12-1 CrMoV 12-1
LX 1.4946 GX 20 CrNiW
1.4523 X 8 CrMoTi 17 X 2 CrMoTiS X2CrMoTiS 23 1 2 3
18 2 18-2 1.6351 GX 2 NiCoMoTi
1.4528 X 105 CrCoMo 1 7 10
18 2
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
1.6781 G 17 NiCrMo G 17 NiCrMo G17NiCrMo G 17 2.4537 G-NiMo 16 CrW

13 6 13-6 13-6 NiCrMo 2.4631 NiCr 20 TiAl NA 20 NCF 80A NC 20 TA Nimonic
13-6 80A
1.6980 X 2 CrNiCoMo 2.4697 G-NiCr 20
12 8 5 Mo 15
COMBINATION
1.7365 GX 15 CrMo5 GX15CrMo5 GX15CrMo5 G X 15 (CorresistG20/

TOOLS
CrMo 5 XM- S20910

1.7390 X 15 CrMo 5 1 X 15 CrMo X 15 CrMo 5-1 19
5-1
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
SOLID CARBIDE
DRILLS
P6 High-Strength Ferritic, Martensitic, and PH Stainless Steels Content: C = .1-.6% Tensile Strength RM (MPa)*: 900-1350 Hardness (HB): 350-450
Number Number
MODULAR DRILLS
1.0021 S 240 GP S 240 GP S 240 GP 1.2342 X 35 CrMoV
1.0023 S 270 GP S 270 GP S 270 GP 511
1.0028 USt 34-2/ S 250 G 1 T 1.2343 H 11 X 38 CrMoV BH 11 SKD 6 T20811 X 38 CrMoV Z 38 CDV 5 X 37 CrMoV
S 250 G1T 5 H1 5 H1 5 1 KU
1.0032 Ust 34-2/ CEW2 STKM S 250 GT 1.2344 H 13 X 40 CrMoV 5 1 BH 13 SKD 61 T20813 X 40 CrMoV Z 40 CDV 5 X 40 CrMoV 2242
COMBINATION
S 250 GT 13 B 51 5 1 1 KU
TOOLS
1.0039 S 235 JRH S 235 JRH S235JRH E 24-2 S 235 JRH 1.2345 X 50 CrVMo 5 1
1.0046 S 320 GP S 320 GP S 320 GP 1.2347 X 40 CrMoVS
1.0083 S 355 GP S 355 GP S 355 GP 51
1.0115 S 235 J0C 1.2357 50 CrMoV 13
1.0117 S 235 J2 G4 En 40 D S 235 J2 G4 E24-4 Fe 360 D 14
1.0118 S 235 J2 G3C 1.2362 X 63 CrMoV 5 1
CARBIDE TAPS
HSS AND
1.0119 S 235 J2 G4C 1.2363 A-2 X 100 CrMoV BA 2 SKD 12 T 30102 X 100 Z 100 CDV 5 X 100 KU 2260
1.0120 St 37-2 S 235 JRC E 24-2 S 235 JRC 51 CrMoV 5 1 CrMoV 5 1
1.0121 S 235 JR G1C 1.2365 H 10 X 32 CrMoV 3 3 BH 10 SKD 7 T 20810 X 32 CrMoV 32 DCV 28 30 CrMoV
1.0138 Ro St 44-3 43D S 275 J2 H E 28-4 S 275 J 2H 12H-28 12 27 KU
1.0160 S 235 JR G1F S 235 JRG 1.2367 X 38 CrMoV 5 3 Z 38 CDV 5-3
1F 1.2368 X 41 CrMoV
1.0162 S 235 J 0 Cu S 235 J0 Cu 531
INDEXABLE
DRILLS
1.0163 S 235 J 2 S 235 J 2 1.2375 83 CrMoV 9
G 4 Cu G 4 Cu 1.2376 X 96 CrMoV 12
1.0164 S 235 JR S 235 JRG 1.2378 D-7 X 220 CrVMo T30407
G1 CuC 1 CuC 12 2
1.0166 S 235 J2 G3 Cu 1.2379 D2 X 155 CrVMo BD 2 SKD 11 T 30402 X 153 Z 160 CDV 12 X 155 KU 2310
COUNTERBORING
1.0169 St 37-2 Cu 3G S 235J R 12 1 CrMoV 12 CrVMo 12 1
(S 235 Cu+CR 1.2390 X 32 CrMoV 4 1
TOOLS
JRCu+CR) 1.2392 GX 28 CrMoV
1.0211 St 30 Si HF W2 51
1.0212 St 30 Al 1.2398 X 70 CrVMo X70
1.0241 S 220 GD + Z 8.2.2
1.0318 S 180 GT CE W 1 STKM S 180 GT 1.2436 X 210 CrW 12 SKD 2 X 210 CrW Z 210 CW1 2 X 215 CrW 2312
PRECISION HOLE
12 B 12 121 KU
FINISHING
1.0357 S 180 G1 T STPL 450 S 180 G 1 T 1.2453 X 130 W 5
1.0408 S 45.4 GT 430 K03006 L 245 MB L 245 MB 1.2564 X 30 WCrV 4 1 30 WCrV
1.0490 StE 285 43D S 275 N S 275 N S 275 N 15 1
1.0522 S 390 GP S 390 GP S 390 GP 1.2567 X 30 WCrV 53 SKD 4 T20814 X 30 WCrV Z 32 WCV 5 X 30 WCrV
1.0523 S 430 GP S 430 GP S 430 GP 53 5 3 KU
1.0576 S 355 J2H 50D S355J2H S355J2H 1.2581 H 21 X 30 WCrV 93 BH 21 SKD 5 T 20821 X 30 WCrV Z 30 WCV 9 X 30 WCrV
INSERTS
(RoSt 52-3) 93 9 3 KU
1.0960 S 320 MC 1.2601 X 165 CrMoV X 165 X 165 KU 2310
1.0962 S 400 MC 12 CrMoV 12 CrMoW 12
1.0963 S 600 MGC 1.2605 X 35 CrWMoV 5 X 35
1.0964 S 750 MC CrWMoV 5
TECHNICAL DATA
1.0965 S 900 MC 1.2606 H 12 X 37 CrMoW BH 12 SKD 62 T20812 Z 35 CWDV 5 X35CrMoW
1.2080 D3 X 210 Cr 12 BD 3 SKD 1 T30403 X 210 Cr 1 2 Z 200 C 12 X 205 Cr 51 05 KU
12 KU 1.2607 GX 37 CrMoW
1.2082 X 21 Cr 13 X 21 Cr 1 3 X 21 Cr 51
13 KU 1.2622 X 60 WCrMoV
1.2083 420 X 42 Cr 13 SUS 420 X 42 Cr 1 3 Z 40 C 14 X 41 2314 94
J2 CR 13 KU 1.2625 X 33 WCrVMo
1.2085 X 33 CrS 16 12 12
INDEX
1.2086 X 290 Cr 12 1.2631 X 50CrMoW

1.2201 G-X 165 CrV 12 911
1.2285 X 230 CrV 12 4 1.2662 X 30 WCrCoV
1.2316 D-4 X 36 CrMo 17 T30404 X 36 CrMo X38CrMo 16-1 X 38 CrMo 93
17 16 1 KU 1.2678 H19 X 45 CrCoVW
1.2341 P4 X 6 CrMo 4 T51604 X 6 CrMo 4 67 SiCr 5 555
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
1.2709 X 3 NiCoMoTi 1.3344 M 3 S 6-5-3 BM 4 SKH 52 T11323 HS 6-5-4 Z120WDCV HS 6-5-3 2725
18 9 5 Cl.2 06-05-04-03
1.2731 X 50 NiCrWV 1.3345 GarantDOMO1 HS 6-5-3C
13 13 1.3346 M 1 S 2-9-1 BM 1 T20842 HS 1-8-1 Z85DCWV HS 1-8-1
1.2764 X 19 NiCrMo 4 08-04-02-01
1.2767 A-9 X 45 NiCrMo 4 T30109 40 NiCrMo 4 Y 35 NCD 16 42 NiCrMo 1.3348 M 7 S 2-9-2 T11307 HS 2-9-2 Z100DCWV HS 2-9-2 2782
COMBINATION
TOOLS
15 7 KU 09-04-02-02
1.2779 X 6 NiCrTi 1.3350 HS 6-6-2 HS 6-6-2
26 15 1.3351 HS 6-5-4 HS 6-5-4
1.2786 X 13 NiCrSi X 13 CrNiSi x Z 15 NCS 1.3355 T 1 S 1-8-0-1 BT 1 SKH 2 T12001 HS 1-8-0-1 Z80WCV HS 18-0-1
36 15 36 15 37-18 18-04-01
1.2787 X 23 CrNi 17 BM 2 SKH 9 (HS 6-5-2) Z 85 WDCV HS 6-5-2-2 2722 1.3395 ASP 2004
CARBIDE TAPS
06-05-04-02 1.3401 A 128 X 120 Mn 12 BW 10 SCMnH 1 J91109 Z 120 M 12 X G 120 2183

HSS AND
1.2790 72 SiNiCrMoV Mn 12
54 1.3533 18 NiCrMo 14 6 18 NiCrMo 16 NCD 13
1.2880 D-5 X 165 CrCoMo T30405 14
12 1.3541 X 45 Cr 13 X 45 Cr 13 X44Cr14 X 41 Cr 13
1.2884 X 210 CrCoW 1.3543 X 102 CrMo 17 J91639 X 102 Crmo X100CrMo17 X 105 CrMo
12 17 17
INDEXABLE
DRILLS
1.2885 X 32 CrMoVoV BH 10 A 1.3549 X 89 CrMoV

333 18 1
1.2888 X 20 CoCrWMo 1.3551 M 50 80 MoCrV 80 DCV 40 X 80 MoCrV
10 9 42 16 44
1.2889 X 45 CoCrMoV 1.3553 X 82 WMoCrV BM 2 SKH 51 X 80 RAPIDEM X 82
COUNTERBORING
553 654 WMoCrV 654 WMoV 65

1.3202 T 15 S 1-2-1-4-5 BT 15 T12015 (HS12-1-5-5) HS 12-1-5-5 HS 12-1- 1.3558 X 75 WCrV BT 1 SKH 2 X 75 WCrV X75WCrV X 75 WCrV
TOOLS
5-5 18 4 1 18 4 1 18-4-1 18
1.3207 M-44 S 1-0-4-3-1-0 BT 42 SKH 57 T11334 HS10-4- Z130WKCDV HS 10-4- 1.3802 X 120 Mn 13
3-10 10-10-04-04 3-10 1.3805 X 35 Mn 18
1.3241 S 6-7-6-10 2727 1.3813 X 40 MnCrN 19
1.3243 M 35 S 6-5-2-5 BM 35 SKH 55 T11336 (HS6-5-2-5) KCV 06-05- HS 6-5-2-5 2723 1.3815 X 40 MnCr 182
PRECISION HOLE
05-04-02 1.3816 X 8 CrMnN

FINISHING
1.3244 ASP 2030 HS6-5-3-8 18 18

1.3246 M 41 S 7-4-2-5 (HS 7-4- T11341 HS1-8-1 Z110 WKCDV HS 7-4-2-5 1.3817 X 40 MnCr 18
2-5) 07-05-04 1.3819 X 50 MnCrV
1.3247 M 42 S 2-1-0-1-8 BM 42 T11342 HS2-9-1-8 Z110 DKCWV HS 2-9-1-8 2716 20 14
09-08-04 1.3820 X 8 CrMnN
1.3249 M-34 S 2-9-2-8 BM 34 T11334 HS 2-9-2-8 20 10
INSERTS
1.3255 T 4 S 1-8-1-2-5 BT 4 SKH 3 T12004 (HS18-1- Z80 WKCV HS18-1-1-5 1.3917 Ni 42 Fe-Ni 42
1-5) 18-05-04-01 1.3919 X 3 Ni 44
1.3257 T 6 S 1-8-1-2-1-5 T12006 HS 18-1- 1.3922 Ni 48 Fe-Ni 48
2-15 1.3923 Ni 51 Fe-Ni 50 Cr 1
1.3265 T 5 S 1-8-1-2-1-0 BT 5 SKH 4A T12005 (HS 1-8-0- HS18-0- 1.3940 GX 2 CrNiN VGs 5.100
1-10) 1-10 18 13
TECHNICAL DATA
1.3302 A-7 S 1-2-1-4 T30107 HS 12-1-4 (X 150 WV 1.3941 X 4 CrNi 18 13

1305 KU) 1.3942 X 15 NiCr 22 3
1.3318 S 1-2-1-2 HS 12-1-2 1.3943 X 20 NiCr
1.3325 HS 0-4-1 HS 0-4-1 36 10
1.3326 ASP 2015 HS 1-4-2 1.3945 X 2 CrNiN 18 11 S.160
1.3327 HS 1-8-1 HS 1-8-1 1.3946 NiCr 42 6 Fe-Ni 42 Cr 6
1.3333 S 3-3-2 HS 3-3-2 (Dilaton 42 Cr 6)
INDEX
1.3335 S 3-3-2 Si 1.3949 X 5 MnCr 18 13

1.3339 BGH 3339 HS 6-5-2 1.3952 X 4 CrNiMoN 316 S 63
1.3342 M 3 SC 6-5-2 T11313 (HS 6-5-2) Z90WDCV06- HSC 6-5-3 18 14
05-04-02 1.3953 X 2 CrNiMo
1.3343 M 2 S 6-5-2 BM 2 SKH 51 T11302 HS 6-5-3 Z85WDCV06- HS 6-5-2 2722 18 15
05-04-02 1.3958 X 5 CrNi 18 11
Technical Data
SOLID CARBIDE
DRILLS
Number Number
MODULAR DRILLS
1.4832 GX 25 CrNiSi 20 14
1.3960 X 45 MnNiCrV 1.4842 X 12 CrNi 25 20 310 S 94 S31080 X 12 CrNi 26 Z 12 CN 26-21
13 76 21 KE
1.3962 X 15 CrNiMn 1.4843 CrNi 25 20 SCS 18 J94202
12 10 1.4846 X 40 CrNi 25 21 310 S 98 SCH 13
1.3964 X 4 CrNiMnMoN 1.4860 NiCr 30 20
19 1 6 5 1.4861 X 10 NiCr
COMBINATION
TOOLS
1.3965 X 8 CrMnNi 32 20
18 8 1.4873 X 45 CrNiW 331 S 40 SUH 31 X 45 CrNiW Z 35 CNWS X 45 CrNiW
1.3967 X 50 CrMnNiN 18 9 18 9 14.14 18 9
22 9 1.4875 EV 12 X 55 CrMnNiN S63012 X 55 Z 55 CMN 2
1.3968 X 12 MnCr 20 8 CrMnNiN 0.08 Az
18 12 20-8
CARBIDE TAPS
1.3974 X 3 CrNiMoNbN 1.4903 X 10 CrMoV 9-1 S59180 X 10 CrMoV
HSS AND
23 17 9-1
1.3987 X 8 CoNiCr 1.4911 X 8 CrCoNiMo Z 9 CKD 11
26 20 10 6
1.4526 X 6 CrMoNb X 6 CrMoNb X6CrMoNb F 17 MNb 1.4912 X 7 CrNiNb X7CrNiNb X7CrNiNb
17 1 17-1 17-1 18 10 18-10 18-10
1.4527 GX 4 NiCrCuMo GX 4 GX 4 1.4913 X 19 Z 21 CDNbV
INDEXABLE
DRILLS
30 20 4 NiCrCuMo NiCrCuMo CrMoVNbN 11 1 11
30-20-4 30-20-4 1.4920 X 15 CrMoV
1.4559 GX 7 GX 7 121
NiCrMoCuNb NiCrMoCuNb 1.4921 X 19 CrMoV
42 20 4220 12 1
COUNTERBORING
1.4572 GX 5 CrNiMoNb 1.4922 X 20 CrMoV X 20 CrMoV X 20 CrMoV 2317
23 9 12 1 11-1 12 01 KW
TOOLS
1.4704 HNV X 45 SiCr 4 S64006 1.4925 X 20 CrMoNV
2 15 1
1.4710 GX 30 CrSi 6 1.4926 X 21 CrMoV X21CrMoV
1.4712 X 10 CrSi 6 12 1 121
1.4713 X 10 CrAl 7 X 10 CrAl 7 1.4935 422 X 20 CrMoWV SUH 616 S42200 X 22
PRECISION HOLE
1.4716 X 8 Cr 9 12 1 CrMoWV
FINISHING
1.4718 HNV X 45 CrSi 93 401 S 45 SUH 1 S65007 X 45 CrSi 8 Z 45 CS 9 X 45 CrSi 8 121
3 1.4936 X 24 CrMoV
1.4721 215 Cr 12 12 1
1.4722 X 10 CrSi 13 1.4945 X 6 CrNiWNb
1.4725 Cr Al 14 4 K91670 16 16
1.4731 X 40 CrSiMo SUH 3 X 40 CrSiMo Z 40 CSD 10 1.4960 X 40 CrNiCoNb
INSERTS
10 2 10-2 13 13
1.4732 X 80 CrSiMoW 1.4962 X 12 CrNiWTi
15 2 16 13
1.4741 X 10 CrSi 18 1.4971 661 X 12 CrCoNi SUH 661 R30155 X 12 CrCoNi Z 12
1.4743 GX 160 CrSi 18 21 20 MoWNb 21 CKNDWNb
1.4748 X 85 CrMoV X 85 CrMoV Z 85 CDMV X 85 CrMoV 20 20 21-20-20
TECHNICAL DATA
18 2 18 2 18.02 19 3 1.4978 X 50 CoCrNi
1.4765 CrAl 25 5 20 20
1.4767 CrAl 20 5 1.4986 X 8 CrNiMoBNb X7C
1.4773 X 8 Cr 30 16 16 rNiMoBNb
1.4777 GX 130 CrSi 29 16-16
1.4785 X 60 Z 60 CMDVNb 1.5662 A 353 X 8 Ni 9 509 SL 9 N 53 K81340 FeE 490 9 Ni X 10 Ni 9
CrMnMoVNbN 21-10 Az Ni 36
INDEX
21 10 1.5663 X 7 Ni 9 X 7 Ni 9 SL9 N590 X 7 Ni 9 X 7 Ni 9 X 7 Ni 9

1.4820 X 12 CrNi 25 4 1.5680 E 12 Ni 19 12 Ni 19 SL5N60 K41583 X 12 Ni 5 Z 18 N 5 112 Ni 19
1.4822 GX 40 CrNi 24 5 2515
1.4829 X 12 CrNi 22 12 311 S 94 SUS Y S30980 X 15 CrNi X 16 CrNi 1.5708 12 NiCr 3 12 NC 2 12 NiCr 3
309 23 13 23 14 1.5810 3115 18 NiCr 6 4 18NiCr5-4 18 NiCr 6-4 20 NC 6
1.6340 12 NiMnMo 5 5
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
1.6566 17 NiCrMo 6 4 17NiCrMo 17 NiCrMo 17 NiCrMo 1.6906 X 5 CrNi 18 10

6-4 6-4 6-4 1.7141
1.6569 17 NiCrMoS 17NiCrMo 17 NiCrMoS 17 NiCrMoS 1.7366 X 16 CrMo 5 1 X 16 CrMo
64 6-4 6-4 6-4 5-1
1.6657 E 14 NiCrMo 13 4 832 M 13 G93106 14 NiCrMo 14 NiCrMo 15 NiCrMo 1.7716 UP S2 MoV
COMBINATION
9310 13-4 13-4 13 1.8949 S 695 MC

TOOLS
H 1.8997 S 720 MC
1.6773 36 NiCrMo 16 36 NiCrMo 35 NCD 16 34 NiCrMo 1.8998 S 680 MC
16 16 2.4651 S-NiCr 20 Mo 9
1.6784 12 NiMoCr 17 4 2.4802 S-NiMo 28
1.6903 X 10 CrNiTi 2.4803 S-NiCr 15 FeTi
18 10
CARBIDE TAPS
HSS AND
1.6905 GX 5 CrNiNb
18 10
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Workpiece Materials Listings — Stainless Steel — M1
SOLID CARBIDE
DRILLS
Workpiece Material Conversion Table — M1
M1 Austenitic Stainless Steels Content: C =.05-.15% Tensile Strength RM (MPa)*: <650 Hardness (HB): 130-200
Number Number
MODULAR DRILLS
1.2765 GX 19 NiCrMo 4 1.4438 317 L X 2 CrNiMo 18 317 S 12 SUS 317 S31703 X 3 CrNiMo Z 2 CND X 2 CrNiMo 2367
1.2780 442 X 15 CrNiSi En61 SUS S44200 X 16 CrNiSi Z 15 16 4 L 18 16 4 19.15 18 15
20 12 309 S 20 12 CN 24.13 1.4439 X 2 CrNiMoN X 3 CrNiMo Z 3 CND 1
1.2782 X 15 CrNiSi SUS X 16 CrNiSi Z 15 CN X 16 CrNiSi 17 13 5 17 13 5 8.14-05 AZ
25 20 309 S 25 20 24.13 25 20 1.4442 X 2 CrNiMo 18 X 3 CrNiMoN
COMBINATION
1.3956 X 8 CrNi 18 12 15 4 19-14
TOOLS
1.4003 X 2 CrNi 1 2 Hyfab3/12 CLC4003 F12N 1.4465 X 1 CrNiMoN 25 S31050
(Mn<1,50) 252
1.4009 X 8 Cr 14 SUS Y S41080 X 8 Cr 13 KE 1.4503 X 3 NiCrCuMoTi
410 27 2 3
1.4015 X 8 Cr 18 SUS Y S43080 1.4506 X 5 NiCrMoCuTi
430 20 18
CARBIDE TAPS
HSS AND
1.4017 X 6 CrNi 17 1 X6CrNi17-1 F17N X6CrNi17-1 1.4516 X 6 CrNiTi 12 X 6 CrNiTi X 6 CrNiTi X 6 CrNiTi
1.4108 X 100 CrMo 13 12 12 12
1.4123 X 15 TN 1.4525 GX 5 CrNiCu 16 GX 5 CrNiCu GX 5 CrNiCu
1.4300 X 12 CrNi 18 8 302 4 16-4 16-4
1.4301 304 H X 5 CrNi 18 10 304 S 15 SUS 304 S30400 X 6 CrNi 18 Z 6 CN 18.09 X 5 CrNi 18 2332 1.4529 X 1 NiCrMoCuN
10 KD 10 25206
1.4303 305 X 5 CrNi 18 12 305 S 19 SUS 305 S30500 X 8 CrNi18 Z 8 CN 18.12 X 8 CrNi 19 1.4532 15-7 X 8 CrNiMoAl X 8 CrNiMoAl X15D2 X 8 CrNiMoAl
INDEXABLE
DRILLS
12 KD 10 PH 15 7 2 15-7-2 15-7-2
1.4307 304L X 2 CrNi 18 9 304 S 11 SUS 304L X 2 CrNi 18 9 CLC18.9.L X 2 CrNi 1.4539 X 1 NiCrMoCuN 904 S 13 N 08904 X 1 NiCrMoCu Z 1 NCDU 52662
18-9 25 20 25-20-5 25.20
1.4308 CF-8 GX 6 CrNi 18 9 304 C 15 SCS 13 X 2 CrNiN 18 Z 6 CN 18.10 G X 5 CrNi 2333 1.4541 321 X 6 CrNiTi 18 10 321 S 12 SUS 321 S32100 X 6 CrNiTi 18 Z 6 CNT 18.10 X 6 CrNiTi 2337
7 M 19-10 10 18 11
COUNTERBORING
1.4310 301 X 12 CrNi 17 7 301 S 21 SUS 301 S30100 X 12 CrNi 17 Z 12 CN 17.07 X 12 CrNi 17 2331 1.4542 630 X 5 CrNiCuNb SUS 630 X 5 CrNiCuNb Z6CNU17.04
1.4311 304 X 2 CrNiN 18 10 304 S 62 SUS 304 S30453 X 2 CrNiN 18 Z 8 CN 18.12 X 8 CrNi 19 2371 16 4 16-4
TOOLS
LN 10 10 1.4550 347 X 6 CrNiNb 18 347 S 17 SUS 347 S34700 X 6 CrNiNb Z 6 CNNb X 6 CrNiNb 2338
1.4312 GX 10 CrNi 18 8 302 C 25 SCS 12 Z 10 CN 18.9 10 18 10 18.10 18 11
M 1.4552 GX 5 CrNiNb 347 C 17 SCS 21 J92710 GX 5 CrNiNb Z 4 CNNb G-X 5 Cr
1.4317 GX 4 CrNi 13 4 GX 4 CrNi GX 4 CrNi GX 4 CrNi 18 9 19-11 19.10 M NiNb 19-11
13-4 13-4 13-4 1.4571 316 Ti X 6 CrNiMoTi 320 S 31 SUS 316 X 6 CrNiMoTi Z 6 CNDT X 6 CrNiMo 2350
PRECISION HOLE
1.4318 X 2 CrNiN 18 7 X 2 CrNiN 18-7L 18-7L 17 12 2 Ti 17 12 2 17.12 Ti 17 12
FINISHING
18-7 1.4573 316 Ti X 10 CrNiMoTi 320 S 33 SUS 316 S31635 X 6 CrNiMo
1.4350 304 X5CrNi189 304S31 - 304 1 Z6CN18.09 X5CrNi1810 1 18 12 Ti Ti 17 13
1.4362 S3 X 2 CrNiN 23 4 SAF 2304 35 N X 2 CrNiN 2327 1.4575 X 1 CrNiMoNb
2304 23-4 28 42
1.4401 316 X 5 CrNiMo 17 316 S 16 SUS 316 S31600 X6 CrNiMo 17 Z 6 CND 17.11 X 5 CrNiMo 1.4577 X 3 CrNiMoTi
12 2 X 12 2 KD 17 12 2347 25 25
INSERTS
1.4404 316 L X 2 CrNiMo 17 316 S 12 SUS 316 S31603 GX 3 CrNiMo Z 3 CND GX 2CrNiMo 2348 1.4580 316 X 6 CrNiMoNb 318 S 17 X 6 CrNiMoNb Z 6 CNDNb X 6 CrNiMo
13 2 L 17 12 2 KD 19.10 M 19 11 Cb 17 12 2 17.12 Nb 17.12 17 12 2
1.4406 316 X 2 CrNiMoN 17 316 S 61 SUS 316 S31653 X 3 CrNiMoN Z 2 CND X 2CrNiMoN 2353 1.4581 GX 5 CrNiMoNb 318 C 17 SCS 22 GX 5 CrNiMo Z 4 CNDNb GX 6 20 11
LN LN 12 2 17 12 2 17.12 Az 17 12 18 10 Nb 19-11-2 18.12 M CRNOMONB
1.4408 CF- GX 6 CrNiMo 18 316 C 16 SCS 14 J92900 GX 5 CrNiMo GX5CrNiMo G X 5CrNiMo 2343 1.4582 X 4 CrNiMoNb SCS 22
TECHNICAL DATA
8M 10 19-11-2 19-11-2 19-11-2 25 7
1.4410 S3 GX 10 CrNiMo SCS 14 A X 2 CrNiMoN Z 5 CND X 2 CrNiMoN 1.4583 318 X 10 CrNiMoNb X 6 CrNiMo
2750 18 9 25-7-4 20.10 M 25-7-4 18 12 13 Nb 17
1.4411 ERO 4411 A GX 4 CrNiMo GX 4 CrNiMo 1.4585 GX 7 CrNiMo J94651
16-5-2 16-5-2 CuNb 18 18
1.4412 ERO 4412 GX 5 CrNiMo GX 5 CrNiMo 1.4586 X 5 CrNiMoCuNb
AHMo 19-11-3 19-11-3 22 18
1.4429 316 X 2 CrNiMoN 17 316 S 62 SUS 316 S31653 X 3 CrNiMoN Z 2 CND X 2 CrNiMoN 2375 1.4818 153 MA X 6 CrNiSiN
INDEX
LN 13 3 LN 17 13 3 17.13 Az 17 13 Ce 19-10
1.4434 X 2 CrNiMoN 317 LN CLC X2CrNiMoN1 1.4825 GX 25 CrNiSi 302 C 35 J92602 G X 16 CrNi
18 12 4 18.12.4.LN 812-4 18 9 20 10
1.4435 316 L X 2 CrNiMo 18 316 S 11 SCS 16 S31603 X 2 CrNiMo Z 2 CND X 2 CrNiMo 2353 1.4826 GX 40 CrNiSi SCH 12 J92603
14 3 18 16 17.13 17 13 22 9
1.4436 316 X 5 CrNiMo 316 S 16 SUS 316 S31600 X6 CrNiMo Z 6 CND X 5 CrNiMo 2343 1.4828 309 X 15 CrNiSi 20 309 S 24 SUH 309 S30900 X 15 CrNiSi Z 15 CNS X 16 CrNiSi
17 1 3 3 18 13 3 KD 17.12 17 13 12 20 12 20.12 25, 20
Technical Data
Workpiece Materials Listings — Stainless Steel — M1
SOLID CARBIDE
DRILLS

M1 Austenitic Stainless Steels Content: C =.05-.15% Tensile Strength RM (MPa)*: <650 Hardness (HB): 130-200
Material AISI DIN BS JIS UNS EN AFNOR UNI SIS Material AISI DIN BS JIS UNS AFNOR UNI SIS AMS
Number Number
MODULAR DRILLS
1.4833 309 S X 7 CrNi 23 14 309 S 24 SUS 309 J93400 X 12 CrNi Z 15 CN 24.13 X 6 CrNi AMS Materials – M1
S 23 13 23 14 1.4319 302 X3CrNi-N17-8 301 S 26; SUS 302 5629
1.4835 X 9 CrNiSiNCe X 9 CrNiSiN 302 S 26 S 26,
21 11 2 Ce 21-11-2 302 S 26
1.4837 GX 40 CrNiSi 309 C 30 SCS 17 J93503 GX 35 CrNi 1.4305 303 X8CrNiS18-9 303 S 22, SUS 303 2346 5640E
(X 10 303 S 31 S22, 303
COMBINATION
25 12 25 12
Cr-NiS 18 9) S 31
TOOLS
1.4841 310 X 15 CrNiSi 314 S 25 SUH 310 S31000 X 15 CrNiSi Z 15 CNS X 16 CrNiSi
25 20 25 20 25.20 25.20 1.4828 309 X15Cr- 309 S 24 SUH 309 5650
1.4845 310 S X 12 CrNi 25 21 310 S 24 SUS 310 S31008 X 8 CrNi Z 12 CN 25.20 X 6 CrNi 2361 NiSi20-12
S 25 21 25 20 1.4401 316 X 5CrNiMo 316 S 13, SUS 316 2347 5362
1.4848 HK GX 40 CrNiSi 310 C 40 SCH 21 J94204 GX 40 CrNi 17 12 2 17, 19,
25 20 26 20 (X4 CrNiMo 31, 33"
CARBIDE TAPS
17-12-2)
HSS AND
1.4854 353 MA X 6 NiCrSiN

Ce 35-25 1.4000; 403, X6Cr13, 403 S 17 SUS 2301 5504C
1.4877 X 6 NiCrNbCe X 6 NiCrNb 1.4001 410S X7Cr14 403, 410
32 27 Ce 32-27 S, 429
1.4878 321 X 12 CrNiTi 321 S 20 SUS 321 S32100 X 10 CrNiTi Z 6 CNT X 6 CrNiTi 2337 1.4005 416 X12CrS13 416 S 21 SUS 416 2380 5610D
18 9 18 10 18.12 18.11 1.4021 420 X20Cr13 420 S 37 SUS 2303 5621
1.4881 EV 11 X 70 CrMnNiN S63011 X 70 420 J1
INDEXABLE
DRILLS
21 6 CrMnNiN 1.4016 430 X6Cr17 430 S 17; SUS 430 2320 5627
21 6 430 S 18
1.4910 X 3 CrNiMoN X 3 CrNiMoN X2 1.4057 431 X17CrNi16-2 431 S 29, SUS 431 2321 5623
17 13 17-13-3 CrNiMoN 6 S. 80
17 12 1.4303 305, X4Cr-Ni18- 305 S 17; SUS 305 5514A
COUNTERBORING
1.4919 316 H X 6 CrNiMo 316 S 51 S31609 X 6 CrNiMo Z 6 CND 30 12 (X 5 Cr- 305 S 19 J 1; SUS
17 13 17 12 2 17-13 B Ni 18 12) 305
TOOLS
1.4941 X 8 CrNiTi X6 Z 6 CNT X 6 CrNiTiB 11 1.4301 304, X5CrNi18 10 304 S 11, SUS 304 2332; 2333 5513
18 10 CrNiTiB 18-10 B 304 H"(X 4 Cr- 304 S 15;
18-10 Ni18-10) 304 S 16;
1.4948 X 6 CrNi 18 11 304 S 51 S30480 X 6 CrNi Z 6 CN 18-09 X 5 CrNi 2333 304 S 17;
18 10 18 10 KW LW21;
PRECISION HOLE
1.4949 X 3 CrNi 18 11 X 2 CrNiN LWCF 21;

FINISHING
18 11 304 S 31
1.4950 X 6 CrNi 23 13 309 H 1.4842 310 S X12Cr-Ni25-20 SUS 2361 5521B
1.4951 X 6 CrNi 25 20 310 H 310 S
1.4961 X 8 CrNiNb 347 S 51 1.4841 314, X15Cr-NiSi25- 314 S 25 SUH 310 5652
16 13 310 20; X15Cr-
1.4981 X 8 CrNiMoNb NiSi25-21
INSERTS
16 16 1.455 347, X6CrNi-Nb 347 S 20, SUS 347 2338 5512B

1.4988 X 8 CrNiMoVNb 348" 18-10 31, 51;
16 13 ANC 3 B
1.6907 304 S 71 AR 304 N 1.4125 440 C X105CrMo17 SUS 5352
1.6909 CLC 004 BC 440 C
1.4876 B163 X10NiCr- NA 15 (H) NCF 800
TECHNICAL DATA
1.6982 GX 3 CrNi 13 4 GX 3 CrNi GX3CrNi13-4 GX 3 CrNi

13-4 13-4 AlTi32-20; (TP)
* 1 Mpa = 145 psi. ** Includes ASTM and SAE material specifications. X10NiCr-
AlTi32-21
INDEX
Technical Data
Workpiece Materials Listings — Stainless Steel — M2, M3
SOLID CARBIDE
DRILLS
M2 High-Strength Austenitic Stainless and Cast Stainless Steels Content: C =.05-.15% Tensile Strength RM (MPa)*: 500-700 Hardness (HB): 150-230
Number Number
MODULAR DRILLS
1.3912 Ni 36 K93601 Fe-Ni 36 1.4545 X 15 U 5 W
1.3984 X 3 CrNiMnMoN 24 21 7 4 1.4546 348 X 5 CrNiNb S 527 J92640 X 6 CrNiNb
1.3986 X 1 CrNiMnMoN 22-17-7 18 10 18 11
1.4320 X 2 CrNiMo 1.4547 X 1 CrNiMoCuN X 1 X1 X1 X1
13 4 20-18-7 CrNiMoCuN CrNiMoCuN CrNiMoCuN CrNiMoCuN
COMBINATION
1.4324 X 10 CrNi18 9 302 S 26 J92501 X 10 CrNi 20-18-7 20-18-7 20-18-7 20-18-7
TOOLS
18 9 1.4548 17-4 X 5 CrNiCuNb SUS 630 S17400 X 5 X5CrNiCuNb
1.4333 X 5 NiCr 32 21 S33200 PH 17 4 4 CrNiCuNb 16-4
1.4372 X 12 CrMnNiN 284 S 16 SUS 201 X 12 X 12 X 12 16-4
17 7 5 CrMnNiN CrMnNiN CrMnNiN 1.4561 X 1 CrNiMoTi
17-7-5 17-7-5 17-7-5 18-13-2
1.4375 X 2 CrMnNiN DMV500 1.4564 17-7 PH
CARBIDE TAPS
HSS AND
20 9 7 1.4568 X 7 CrNiAl 17 7 301 S 81 SUS 631 S17700 X 7 CrNiAl X7CrNiAl17-7; X 7 CrNiAl 2388
1.4413 X 3 CrNiMo S42400 X3CrNiMo 17-7 Z9CNA17-07 17-7
13 4 13-4 1.4574 N 752
1.4432 316L X 2 CrNiMo 316 S 13 SUS 316L X 2 CrNiMo Z 3 CND X 2 CrNiMo 1.4578 X 3 CrNiCuMo X3 X3CrNiCuMo X 3
17 12 3 17 12 2 17-13-30 17-12-3 17 11 3 2 CrNiCuMo 17-11-3-2 CrNiCuMo
1.4441 X 2 CrNiMo DMV 4441 17 11 3 2 17-11-3-2
18 15 3 1.4593 BGH 4593
INDEXABLE
DRILLS
1.4454 1.4594 X5 X5 X5 X5
1.4466 X 1 CrNiMoN 725 LN DMV 25.22.2 X 1 CrNiMoCuNb CrNiMoCuNb CrNiMoCuNb CrNiMoCu
25 22 2 CrNiMoN 14 5 14-5 14-5 Nb 14-5
25-22-2 1.4605 X 2 CrAlTi 18 2 X 2 CrAlTi DMV 59 X2
1.4501 X2 X2 X2 X 2 CrNiMo 18-2 CrAlTi 18-2
COUNTERBORING
CrNiMoCuWN CrNiMoCuWN CrNiMoCuWN CuWN 1.4652 654 SMO
25-7-4 25 7 4 25 7 4 25 7 4 1.4840 G-X 15 CrNi
TOOLS
1.4504 S17780 25-20
1.4507 X 2 CrNiMoCuN X 2 CrNiMo DMV25.7Cu 329SK 1.4847 X 8 CrNiAlTi S33400
25 6 3 CuN 25-6-3 20 20
1.4508 GX 2 CrNiMo X 6 CrNiCu Z 4 CNUD 1.4866 X 33 CrNiMnN X 33 X 33
CuWN 25 8 4 18 10 4 KD 17-11-03 FF 23 8 CrNiMnN CrNiMnN 23-8
PRECISION HOLE
1.4530 X 3 CrNiMoNbVN 25 6 4 23-8
FINISHING
1.4534 13-8 X 3 CrNiMoAl S13800 Z4 CNDAT 1.4892 BGH 4892
PH 13 8 2 13-09 1.4938 X 12 CrNiMoV X 12 X 12
1.4537 X1 X1 X1 12 3 CrNiMoV CrNiMoV 12-3
CrNiMoCuN CrNiMoCuN CrNiMoCuN 12-3
25-25-5 25-25-5 25-25-5 1.4982 Esshete12 50 X 10 X 10
1.4540 15-5 X 4 CrNiCuNb J92200 Z 4 CNUNb CrNiMoMnN CrNiMoMnN
INSERTS
PH 16 4 16.4 M bVB 15-10-1 bVB 15-10-1
1.4544 A 700 304 S 31 J92630 X 6 CrNiTi 1.6960 X 1 CrNiCoMo
18 11 13-8-5
TECHNICAL DATA
M3 Duplex Steels Content: C = .05-.2% Tensile Strength RM (MPa)*: < 900 Hardness (HB): 135-275
Number Number
1.3985 X 2 CrNiMoN 1.4821 X 20 CrNiSi S44635 X 15 Z 20 CNS X 20

23 15 25 4 CrNiSi 25.04 CrNiSi 254
INDEX
1.4460 329 X 4 CrNiMo SUS S32900 X 3 CrNiMo X 2 CrNiMo X 3 CrNiMo 2324 25 4

27 5 2 329 J1 27 5 2 25-7-3 27-5-2 1.4823 GX 40 J92605
1.4462 S318 X 2 CrNiMoN 318 S 13 SUS X 2 CrNiMoN Z 3 CND X2 2377 CrNiSi 27 4
03 22 5 3 329J 3L 22 5 3 22.05 AZ CrNiMoN
22-5-3
Technical Data
Workpiece Materials Listings — Cast Iron — K1, K2
SOLID CARBIDE
DRILLS
Workpiece Material Conversion Table — K1

K1 Gray Cast Irons and Low-Strength Ductile Irons Tensile Strength RM (MPa)*: 150-400 Hardness (HB): 120-290
Number Number
MODULAR DRILLS
0.6010 A48- GG-10 Grade 100 FC 100 GJL-100 FGL 100 G 10 0110- 0.6027 GG -220HB W06027 GJL-HB 250 FGL 250
20 B 00 0.6030 A48- GG- 30 Grade 300 FC 300 GJL-300 FGL 300 G 30 0130-
0.6012 GG-150HB GJL-HB 170 45 B 00
0.6015 A48- GG-15 Grade 150 FC 150 GJL-150 FGL 150 G 15 0115- 0.6032 GG -240HB GJL-HB 275
25 B 00 0.6035 A48- GG- 35 Grade 350 FC 350 GJL-350 FGL 350 G 35 0135-
COMBINATION
0.6017 GG-170HB N06985 GJL-HB 205 50 B 00

TOOLS
0.6020 A48- GG- 20 Grade 220 FC 200 W06020 GJL-200 FGL 200 G 20 0120- 0.6037 GG- 260HB GJL-HB 275
30 B 00 0.6040 A48- GG- 40 Grade 400 GJL-400 FGL 400 0140-
0.6022 GG-190HB N06022 GJL-HB 230 55 B 00
0.6025 A48- GG -25 Grade 260 FC 250 GJL-250 FGL 250 G 25 0125- 0.9990 GGV-40 GJV-400
35 B 00
0.6026 GG- 26 FC260 G 26 0126-
CARBIDE TAPS
HSS AND
00
INDEXABLE
DRILLS

K2 Low- and Medium-Strength CGI and Ductile Irons Tensile Strength RM (MPa)*: 400-600 Hardness (HB): 130-260
Number Number
COUNTERBORING
TOOLS
0.6652 GGL-NiMn137 L-NiMn FCA NiMn F43000 GJLA-XNiMn L-NM 13 7 0.7060 80- GGG -60 SNG 600/3 FCD 600 F33800 GJS-600-3 FGS 600-3 GS 600/3 0732-
13 7 13 7 13-7 55- 03
0.6655 A 436 GGL- L-NiCuCr FCA - F41000 GJLA- L-NUC 15 6 2 06
Type NiCuCr1562 15 6 2 NiCuCr XNiCuCr 0.7065 GGG-65
1 15 6 2 15-6-2 0.7070 100- GGG-70 SNG 700/2 FCD 700 F34800 GJS-700-2 FGS 700-2 GS 700-2 0737-
PRECISION HOLE
0.6656 A 436 GGL- L-NiCuCr FCA- F41001 GJLA- L-NUC 15 6 3 70- 01

FINISHING
Type NiCuCr1563 15 6 3 NiCuCr XNiCuCr 03

1b 15 6 3 15-6-3 0.7652 GGG-NiMn137 S-NiMn FCDA- GJSA-XNiMn S-Mn 0772-
0.6660 A 436 GGL-NiCr202 L-NiCr 20 2 FCA- F41002 GJLA- L-NC 20 2 0523- 13 7 137 13-7 13 7 00
Type NiCr 20 2 XNiCr 20-2 00 0.7659 GGG- FCDA- GJSA-
2 NiCrNb202 NiCrNb XNiCrNb
0.6661 A 436 GGL-NiCr203 L-NiCr 20 3 FCA- F41003 GJLA- L -NC 20 3 S2W 20 2 20-2
Type NiCr 20 3 XNiCr 20-3 0.7660 A 439 GGG-NiCr202 L-NiCuCr FCDA- GJSA- S-L-NC 0523-
INSERTS
2b Type 20 2 NiCr 20 2 20 2; XNiCr 20-2 00

0.6667 GGL- L-NiSiCr FCA- GJLA- L-NSC 20 5 3 D-2 A32-301
NiSiCr2053 20 5 3 NiSiCr XNiSiCr 0.7665 GGG- S-NiSiCr FCDA- GJSA- S-NSC 20 5 2
20 5 3 20-5-3 NiSiCr2052 20 5 2 NiSiCr XNiSiCr
0.7033 GGG-35.3 GJS-350-22 0717- 20 5 2 20-5-2
TECHNICAL DATA
15 0.7670 A 439 GGG-Ni22 S-Ni 22 FCDA- F43002 GJSA-XNi 22 S-N 22

0.7040 60- GGG-40 SNG FCD 400 F32800 GJS- FGS400-12 GS400-12 0717- Type Ni 22
40- 420/12 class 1 400-15 02 D-2C
18 0.7673 A 571 GGG-NiMn234 S-NiMn FCDA- GJSA- S-NM 23 4
0.7043 GGG- 40.3 SNG FCD 370 GJS-400-18 FGS 370-17 GSO 42/15 0717- Type 23 4 NiMn XNiMn 23-4
370/17 15 D-2M 23 4
0.7045 GGG-45 FCD 450 0.9991 GGV-30 GJV-300
0.7049 FGS450.10
INDEX
0.7050 65- GGG-50 SNG 500/7 FCD 500 F33100 GJS-500-7 FGS 500-7 GS 500/7 0727-
45- 02
12
Technical Data
Workpiece Materials Listings — Cast Iron — K3
SOLID CARBIDE
DRILLS
K3 High-Strength Ductile and Austempered Ductile Irons Tensile Strength RM (MPa)*: 600-900 Hardness (HB): 180-350
Number Number
MODULAR DRILLS
0.7080 120- GGG-80 SNG 800/2 FCD 800 F36200 GJS-800-2 FGS 800-2 GS 800-2 0.8065 GTW-65 GMB 65
90- 0.8070
02 0.8135 32510 GTS-35-10 B 340/12 FCMP GJMB- MN 350-10 5922 0815
0.7661 A 439 GGG-NiCr203 S-NiCr 20 3 FCDA- F43001 GJSA- 330 350-10 B35-10
Type NiCr 20 3 XNiCr 20-3 0.8145 40010 GTS-45-06 P 440/7 FCMP GJMB- MN 450 - 6 P 45-06 0852
COMBINATION
D-2B 440 450-6
TOOLS
0.8035 GTW-35-04 W 35-04 FCMW GJMW- MB 35-7 W 35-04 0.8155 50005 GTS-55-04 P 510/4 FCMP GJMB- MN 550-4 P 55-04 0854
330 35-0-4 490 550-4
class 1 0.8165 70003 GTS-65-02 P 570/3 FCMP GJMB- MN 650-3 P 65-02 "0858
0.8038 GTW-S-38-1 2 W 38-12 GJMW- MB 300-12 5922 540 650-2 -00,
360-12 W38-12 0856-
0.8040 GTW-40-05 W 40-05 FCMW GJMW- MB 400-5 GMB 40 00"
CARBIDE TAPS
HSS AND
370 400-5 0.8170 90001GTS-70-02 P 690/2 FCMP GJMB- MN 700-2 P 70-02 0862-
0.8045 GTW-45-07 W 45-07 FCMWP GJMW- MB 450-7 GMB 45 690 700-2 03;
440 450-7 0864-
class 3 03
0.8055 GTW-55 GMB 55
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Workpiece Materials Listings — Non-Ferrous Metals — N1
SOLID CARBIDE
DRILLS
Workpiece Material Conversion Table — N1

N1 Wrought Aluminum Alloys Tensile Strength RM (MPa)*: < 520 Hardness (HB) or HRC: 60-90
Number Number
MODULAR DRILLS
— — AlMg3Mn — — — 1 1 1 1 3.0286 SG-Al99,8

1.0226 Algafort / — DX51D GC FeP 02 G 1151- 3.0305 Al 99.9
DX51D (St 02 Z) 10 3.0515 G-Al99,5
1.0250 St E 320-3Z S 320 GD 3.0615 AlMgSiPb
+ ZA 3.0805 SG-Al 99,5Ti
COMBINATION
1.0309 St 35.4 DX 55 D 3.1325 2017 AlCuMg 1 AW-2017 A

TOOLS
+ AS 3.1355 2024 AlCuMg 2 AW-2024

1.0350 Alugal AL3 3.1371 G-AlCu 4 TiMg
1.0531 AluzincAC550 S 550 GD 3.1645 AlCuMgPb
( S550 GD + Z) +Z 3.1655 2011 AlCuBiPb
1.0579 Aldur 50 3.1754 G-AlCu 5
1.3711 AlNiCo 3/5p Ni 1,5
CARBIDE TAPS
HSS AND
1.3713 AlNiCo 5/6p 3.2245 SG-AlSi 5

1.3715 AlNiCo 7/8p 3.2315 6351 AlMgSi 1 AW-6005 A
1.3728 AlNiCo 9/5 3.3206 6063 AlMgSi0.5
1.3743 AlNiCo 12/6 3.3292 G-D AlMg 9
1.3756 AlNiCo 18/9 3.3315 5005 AlMg 1 AW-6082
1.3757 AlNiCo 44/5 3.3316 5050 — — — — 1 1 1 1
1.3758 AlNiCo 30/10 3.3455 AlZnMg 3
INDEXABLE
DRILLS
1.3759 AlNiCo 52/6 3.3523 5052 — — — — 1 1 1 1

1.3760 AlNiCo 26/6 3.3525 AlMg 2
1.3761 AlNiCo 35/5 3.3535 5754 AlMg 3
1.3763 AlNiCo 60/11 3.3536 SG-AlMg 3
1.3765 AlNiCo 30/14 3.3541 G-AlMg 3
COUNTERBORING
1.6528 AISI 8660 G 86600, 3.3545 5086 — — — — 1 1 1 1

H 86600 3.3547 5083 AlMg4,5Mn
TOOLS
1.8909 S 500 QL S500QL S 500 QL S 500 QL 2615 3.3548 SG-AlMg

1.8926 S 550 QL S 550 QL S 550 QL S 550 QL 4,5 Mn
( TStE 500 V ) 3.3549 5056 — — — — 1 1 1 1
1.8927 S 620 QL S 620 QL S 620 QL S 620 QL 3.3555 AlMg 5
( TStE 620 V ) 3.3556 SG-AlMg 5
PRECISION HOLE
3.0250 1000 Al99.5H L31 A59050C 3.4345 7050 AlZnMgCu0,5; L 86 AZ 4 GU/9051 811-04
FINISHING
3.0255 1000 Al99.5 L 31 A 59050 C AlZnMgCu1

3.0259 SG-Al 99,5 3.4365 — AlZn5,5MgCu — — — 1 1 1 1
3.0280 Al99.8
INSERTS
TECHNICAL DATA
INDEX
Technical Data
SOLID CARBIDE
DRILLS
N2 Cast Aluminums Content: Si <12.2% Tensile Strength RM (MPa)*: < 350 Hardness (HB): 70-100
For Best Solid Carbide, Modular, and Indexable Drilling Tools, pages A1–A130, B1–B78, E1–E100. For Best Tapping, Boring, and Reaming Solutions, pages D1–D61, F1–F3, G1–G194.W
Number Number
MODULAR DRILLS
2.1871 G-AlCu 4 TiMg 3.3261 G-AlMg 5 Si
3.0805 SG-Al 99,5 Ti 3.3308 Al 99.9 Mg 5
3.0928 G-AlCu 5 Si 3 3.3458 G-AlMg5Si
3.1263 GK-AlCu 5 Si 3 (Cu,Mn)
3.1841 G-AlCu 4 Ti 3.3546 SG-Al Mg
COMBINATION
3.2131 G-AlSi 5 Cu 1 4,5 Mn Zr
TOOLS
3.2151 G-AlSi 6 Cu 4 3.3561 G-AlMg 5
3.2153 G-AlSi 7 Cu 3 3.3591 G-AlMg 10
3.2161 G-AlSi 8 Cu 3 3.5100
3.2163 G-AlSi 9 Cu 3 3.5101 ZE 41 G-MgZn 4 MAG 5 MCMgZn G-Z 4 TR
3.2211 G-AlSi 1 1 SE 1 Zr 1 4 RE 1 Zr
3.2245 SG-AlSi 5 3.5102 G-MgZn 5
CARBIDE TAPS
HSS AND
3.2341 G-AlSi 5 Mg Th 2 Zr 1
3.2341 G-AlSi 5 Mg 3.5103 EZ 33 MgSE 3 MAG 6 MCMgRE G-TR 3 Z 2
3.2371 4218 G-AlSi 7 Mg Zn 2 Zr 1 3 Zn 2 Zr
B 3.5104 MgAl 9 Zn 1
3.2373 G-AlSi 9 Mg 3.5105 G-MgTh 3
3.2381 G-AlSi 10 Mg Zn 2 Zr 1
3.2382 G-D AlSi 10 Mg 3.5106 QE 22 G-MgAg 3 MAG 12 MCMgRE G-Ag 22, 5
INDEXABLE
DRILLS
3.2383 A G-AlSi 10 LM 9 4253 SE 2 Zr 1 2 Ag 2 Zr
360.2 Mg(Cu) 3.5200 G-MgAl 8 Zn 1
3.2515 AlMgSi 1 3.5312 MgAl 3 Zn
3.2573 G-AlSi 9 (Cu) 3.5470 AS 41 G-D MgAl 4 Si 1 MCMgAl4Si G-A4S 1
3.2581 A G-AlSi 12 LM 6 4261 3.5612 G-D MgAl
COUNTERBORING
6 Zn 1
3.2582 A G-D AlSi 12 4247 3.5632 G-MgAl 6 Zn 3
TOOLS
413.0 3.5662 G-D MgAl 6
3.2583 A G-AlSi 12(Cu) LM 20 4260 3.5812 AZ 81 G-MgAl 8 Zn 1 MAG 1 MCMgAl G-A 9
413.1 8 Zn 1
3.2585 SG-AlSi 12 3.5912 AZ 91 G-MgAl 9 Zn 1 MAG 7 MCMgAl G-A 9 Z 1
3.2982 G-D AlSi 12(Cu) 9 Zn 1
PRECISION HOLE
3.3241 G-AlMg 3 Si 3.5922 GD-MgAl 9 Zn 2
FINISHING
3.3245 AlMg 3 Si G-AlZn10Si8Mg
INSERTS
TECHNICAL DATA
INDEX
Technical Data
SOLID CARBIDE
DRILLS

N2 Cast Aluminums Content: Si <12.2% Tensile Strength RM (MPa)*: < 350 Hardness (HB): 70-100
Material AISI** DIN BS JIS UNS AFNOR UNI SIS AMS Material AISI** DIN BS JIS UNS AFNOR UNI SIS AMS
Number Number
MODULAR DRILLS
AMS Materials – N1 AMS Materials – N1

2014 3.1255, 2014A, A2014,A3x1 14 4338 4028, 6061 3.321, 606, A6061,A2x4 4025,
AlCuSiMn H15, L102, 4029, AlMgSiCu H20,L117, 4026,
L103, L105, 4133, L118 4027,
L158, L159, 4134, 4079,
L168, 6L37, 4135,
4080,
COMBINATION
3L62, 2L77, 4314,

TOOLS
4081,
2L87, 2L93, 4153
5010A" 4083,
2024 3.1355, 2L97, A2024,A3x4 4007, 4113,
AlCuMg2 2L98" 4035, 4115,
4037, 4116,
4086, 4117,
CARBIDE TAPS
4119, 4127,
HSS AND
4120, 4128,
4193,
4146,
4112,
4150,
4152,
4164, 4160,
4165, 4161,
4087, 4172,
INDEXABLE
DRILLS
4088, 4173,
7223, 4312
4031, 7075 3.4365, 7075, A7075,A3x6 4044,
4066, AlZnMg-Cu1.5 2L95, 4078,
4068,
L160, 4122,
4143,
COUNTERBORING
L161, 4123,
4144,
L162" 4126,
TOOLS
4162,
4163, 4141,
4313 4147,
2618 4132 4154,
4166,
4167,
PRECISION HOLE
4168,
FINISHING
4169,
4186,
4187,
4310,
4311,
4124
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Workpiece Materials Listings — Non-Ferrous Metals — N3, N4
SOLID CARBIDE
DRILLS
N3 Cast Aluminums Content: Si >12.2% Tensile Strength RM (MPa)*: 200-320 Hardness (HB): 60-120
For Best Solid Carbide, Modular, and Indexable Drilling Tools, pages A1–A130, B1–B78, E1–E100.
Material AISI** DIN BS JIS UNS EN AFNOR UNI SIS
Number
MODULAR DRILLS
G-AlSi17
Cu4Mg
GK-AlSi18
CuNiMg
COMBINATION
GK-AlSi21
TOOLS
CuNiMg
GK-AlSi12
CuNiMg
GK-AlSi25
CuNiMg
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
N4 MMCs (Aluminum-Based Metal Matrix Composites) Tensile Strength RM (MPa)*: < 700 Hardness (HB): 210
For Best Solid Carbide, Modular, and Indexable Drilling Tools, pages A1–A130, B1–B78, E1–E100.
Material AISI** DIN BS JIS UNS EN AFNOR UNI SIS
Number
2.0966 C CuAl 10 Ca 104 U-A 10 N
COUNTERBORING
63000 Ni 5 Fe 4
TOOLS
3.5104 MgAl 9 Zn 1
GFK
CFK
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
SOLID CARBIDE
DRILLS

N5 Copper and Copper Alloys Tensile Strength RM (MPa)*: 200-650 Hardness (HB): 60-200
Number Number
MODULAR DRILLS
1.6261 17 CuNi 4 2.0872 CuNi 10

1.8980 5 CuNi 123 S 500 A S 500 A S 500 A Fe 1 Mn
(S 500 A) 2.0873 S - CuNi 10 Fe
2.0040 OF-Cu 2.0882 CuNi 30
2.0060 B- E-Cu 57 Mn 1 Fe
COMBINATION
120 2.0916 CuAl 5

TOOLS
2.0065 C E-Cu 58 C 101 Cn-a2 2.0920 CuAl 8

11000 2.0921 SG-Cu Al 8
2.0070 C SE-Cu C 101 Cu-c1 2.0922 SG-CuAl 8 Ni 2
10300 2.0923 SG - CuAl
2.0082 C G-CuL 45 HCC 1 8 Ni 6
81100 2.0927 SG-CuAl 9
CARBIDE TAPS
HSS AND
2.0085 C G-Cu L 50 HCC 1 Ni5 Fe

81100 2.0928 G-CuAl 9
2.0220 CuZn 5 2.0932 CuAl 8 Fe
2.0240 C CuZn 15 CZ 102 C 2300 CuZn 15 2.0936 CuAl 10 CA 103 U-A 10 Fe
23000 Fe 3 Mn 2
2.0241 CuZn 40 MnPb 2.0937 SG-Cu Al 10 Fe
2.0250 CuZn 20 2.0940 G-CuAl 10 Fe
INDEXABLE
DRILLS
2.0265 C CuZn 30 CZ 102 C 2600 CuZn 30 2.0960 CuAl 9 Mn

26000 2.0966 C CuAl 10 Ca 104 U-A 10 N
2.0280 CuZn 33 63000 Ni 5 Fe 4
2.0290 G-CuZn 33 Pb 2.0970 G-CuAl 9 Ni
2.0321 C CuZn 37 CZ 108 CuZn 37 C 2720 2.0975 B- G-CuAl 10 Ni
COUNTERBORING
27200 148-
2.0330 CuZn 36 Pb 1.5 52
TOOLS
2.0331 CuZn 36 2.0980 CuAl 11 Ni

Pb 1,5 2.1006 SG-Cu Sn
2.0332 CuZn 37 2.1016 CuSn 12
Pb 0,5 2.1022 SG-Cu Sn 6
2.0340 G-CuZn 37 Pb 2.1025 EL - CuSn 7
PRECISION HOLE
2.0366 L-CuZn40Si 2.1050 C G-CuSn 10 CT 1

FINISHING
2.0380 CuZn 39 Pb 2 90700

2.0401 CuZn 39 Pb 2.1052 C G-CuSn 12 Pb 2 UE 12 P
3 + D567 90800
2.0402 CuZn 40 Pb 2 2.1060 C G-CuSn 12 Ni
2.0460 CuZn 20 Al 2 91700
2.0490 CuSn 2 2.1061 G-CuSn 12 Pb
INSERTS
2.0492 B- G-CuZn 15Si 4 2.1086 G-CuSn 10 Zn

198 2.1090 C G-CuSn 7 ZnPb U-E 7 Z 5 Pb 4
2.0510 CuZn 37Al 1 93200
2.0550 CuZn 40 Al 2 2.1093 G-CuSn 6 ZnNi LG 4
2.0561 CuZn 40Al 1 2.1096 C G-CuSn 5 ZnPb LG 2 U-E 5 Pb 5 Z 5
TECHNICAL DATA
2.0590 G-CuZn 40 Fe 83600

2.0591 G-KCuZn 38 Al 2.1096 G-CuSn 5 PbZn
2.0592 C G-CuZn 35 Al 1 HTB 1 U-Z 36 N 3 2.1098 G-CuSn 2 ZnPb
86500 2.1170 CuPb 5 Sn 5
2.0595 G-KCuZn 2.1176 C G-CuPb 10 Sn LB 2 U-E 10 Pb 10
37 Al 1 93700
2.0596 C G-CuZn 34 Al 2 HTB 1 U-Z 36 N 3 2.1182 C G-CuPb 15 Sn LB 1 U-Pb 15 E 8
86200 93800
INDEX
2.0598 G-CuZn 25 Al 5 2.1188 C G-CuPb 20 Sn LB 5 U-Pb 20

2.0790 CuNi 18 Zn 94100
19 Pb 2.1202 CuAg
2.0837 S - CuNi 30 Fe 2.1211 SG - CuAg
2.0855 CuNi 2 Si 2.1243 "CuBe 1,2"
2.0857 CuNi 3 Si 2.1245 "CuBe 1,7"
Technical Data
SOLID CARBIDE
DRILLS
N5 Copper and Copper Alloys Tensile Strength RM (MPa)*: 200-650 Hardness (HB): 60-200
Number Numberw
MODULAR DRILLS
2.1247 CuBe 2 2.1322 "CuMg 0,4"
2.1265 "CuCd 0,7" 2.1323 "CuMg 0,7"
2.1266 CuCd 1 2.1355 CuMn 2
2.1270 CuCdSn 2.1363 CuMn 2
2.1285 CuCoBe 2.1366 CuMn 5
COMBINATION
2.1291 CuCr 2.1367 SG-Cu Mn
TOOLS
2.1292 C G-CuCrF 35 CC1-FF 13 Al 7
81500 2.1461 SG-Cu Si 3
2.1293 C CuCrZr CC 102 "U-Cr 0,8 Zr" 2.1522 CuSi 2 Mn
81500 2.1525 CuSi 3 Mn
CARBIDE TAPS
HSS AND
INDEXABLE
DRILLS
COUNTERBORING
TOOLS
PRECISION HOLE
FINISHING
INSERTS
TECHNICAL DATA
INDEX
Technical Data
Workpiece Materials Listings — High-Temp Alloys — S1
SOLID CARBIDE
DRILLS
Workpiece Material Conversion Table — S1

S1 Iron-Based, Heat-Resistant Alloys Tensile Strength RM (MPa)*: 500-1200 Hardness (HB): 160-260
Number Number
MODULAR DRILLS
0.6676 A 436 GGL- NiCr303 L-NiCr 30 3 FCA-NiCr F41004 GJLA-XNiCr L-NC 30 3 1.4852 GX 40 NiCrSiNb
Type 30 3 30-3 35 25
3 1.4853 X 40 NiCrNb
0.6680 A 436 GGL- L-NiSiCr FCA- F41005 GJLA- L-NSC 30 5 5 35 25
Type NiSiCr3055 30 5 5 NiSiCr XNiSiCr 1.4857 GX 40 NiCrSi J95705 GX 50 NiCr
COMBINATION
4 30 5 5 30-5-5 35 25 35 25
TOOLS
0.7676 A 439 GGG-NiCr303 S-NiCr 30 3 FCDA- F43003 GJSA- S-NC 30 3 1.4859 GX 10 NiCrNb J95151
Type NiCr 30 3 XNiCr 30-3 32 20
D-3 1.4862 X 8 NiCrSi NA 17 Z 12 NCS
0.7677 A 439 GGG-NiCr301 S-NiCr 30 1 FCDA- F43004 GJSA- S-NC 30 1 38 18 37.18
Type NiCr 30 1 XNiCr 30-1 1.4863 X 12 NiCr 36 18
D-3A 1.4864 330 X 12 NiCrSi NA 17 SUH 330 N08330 X 12 NiCrSi Z 12 NCS
CARBIDE TAPS
HSS AND
0.7679 GGG- FCDA- GJSA- 35 16 35 1 6 37.18

NiSiCr3055 NiSiCr XNiSiCr 1.4865 GX 40 NiCrSi 330 C 40 SCH 15 J94605 GX 50 NiCr
30 5 5 30-5-5 38 18 39 19
0.7680 A 439 GGG- FCDA- F43005 GJSA- S-NSC 30 5 5 1.4876 B 163 X 10 NiCrAlTi NA 15 NCF 800 X 10 NiCrAlTi Z 8 NC 32.21
Type NiSiCr3053 S-NiSiCr NiSiCr XNiSiCr 32 20 32 20
D-4 30 5 5 30 5 4 30-5-3 1.4886 X 10 NiCrSi X10NiCrSi
0.7683 A 439 Type D-5 GGG-Ni35 S-Ni 35 FCDA- F43006 GJSA-XNi 35 S-N 35 35 19 35-19
INDEXABLE
DRILLS
Ni 35 1.4887 X 10 NiCrSiNb X10NiCrSiNb

0.7685 A 439 GGG-NiCr353 S-NiCr 35 3 FCDA- F43007 GJSA- S-NC 35 3 35 22 35-22
Type NiCr 35 3 XNiCr 35-3 1.4958 X 5 NiCrAlTi
D-5A 31 20
0.7688 GGG- FCDA- GJSA- FGS Ni35 1.4977 X 40 CoCrNi Z 42
COUNTERBORING
NiSiCr3552 NiSiCr XNiSiCr Si 5 Cr2 20 20 CNKDWNb

35 5 2 35-5-2 R Haynes 188
TOOLS
1.2789 X 7 NiCrCoMo 30188

54 20 S A-286
1.3910 D1 66286
1.3915 D1a S Greek
1.3916 D3 BD 3 X 210 Cr 1 2 Z 200 C 12 X 205 Cr 41800 Ascology
PRECISION HOLE
12 KU R Haynes 556 HS556

FINISHING
1.3920 Ni 46 30556
1.3926 RNi 12 R N155
1.3927 Ni 48 30155
1.3938 X 8 NiCr 17 10 Material AISI** DIN BS JIS UNS AFNOR UNI SIS AMS
1.4335 X 1 CrNi 25 21 X 1 CrNi X1CrNi25-21 X 1 CrNi Number
25 21 25-21
AMS Materials – S1
INSERTS
1.4361 X 1 CrNiSi X1 Z 1 CNS X 1 CrNiSi

A- 5525,
18 15 CrNiSi 18.15 18-15-4
286 5731,
18-15-4
5732,
1.4500 GX 7 SCS 23 J95150 10.204.3.1B Z 3 NCDU GX 5
5737,
NiCrMoCuNb 25.20 M NiCrCuMo
5805,
TECHNICAL DATA
25 20 29 21
5895,
1.4558 X 2 NiCrAlTi NCF 800
7235,
32 20 TB
7477,
1.4562 X 1 NiCrMoCu
7478
32 28 7
Haynes 5608,
1.4563 X 1 NiCrMoCuN X1 X1 X 1 -27-4 2584
188 5772,
31 27 4 NiCrMoCu NiCrMoCuN NiCrMoCuN
5801
31 27 4 31 -27-4 31
In- 5397
INDEX
1.4836 GX 50 CrNiNb
100
25 22
1.4849 GX 40 NiCrSiNb N08004
38 18
1.4850 X 15 NiCrNb
32 21
Technical Data
SOLID CARBIDE
DRILLS
S2 Nickel-Based or Cobalt-Based, Heat-Resistant Alloys Tensile Strength RM (MPa)*: 1000-1450 Hardness (HB): 250-450
Number Number
MODULAR DRILLS
1.0513 GL-A 32 K11846 S 315 G 1 S 2.4370 NiCu 30 Ti
( S 315 G 1 S) 2.4374 NiCu 30 Al
1.0583 GL-A36 K11852 S 355 G1 S 2.4375 N NiCu 30 Al NA 18 NU 30 AT Monel
( S 355 G 1 S) 05500 K-500
1.0874 A0 2.4377 SG-NiCu NA 33
1.0875 A2 X 100
COMBINATION
30 MnTi
TOOLS
CrMoV 5 1 2.4420 NiFe 44
1.0876 A3 2.4500 NiFe16 CuCr
1.3901 Ni 25 2.4520 NiFe16 CuMo
1.3913 Ni 38 2.4560 NiFeK 6040
1.3918 Ni 43 2.4602 NiCr 21 Mo 14 W N26022 Inconel 622
1.3921 Ni 46 2.4603 NiCr 30 FeMo
CARBIDE TAPS
1.3924 Ni 54
HSS AND
2.4604 NiMo 23 Cr 8 Fe
1.3928 Ni 52 2.4605 NiCr 23
1.3935 X 12 CrNiMn Mo 16 Al
18 88 2.4607 SG/UP-NiCr
1.4939 X 12 CrNiMo S.151 Z 12 CNDV 23 Mo 16
12 12-03 2.4608 NiCr 26 MoW
1.4943 X 4 NiCrTi HR251 SUH 660 S66286 Z 6 NCTDV 2.4610 N NiMo 16 Cr N26455 Hastelloy C-4
INDEXABLE
DRILLS
25 15 25.15 B 06455 16 Ti NA 45
1.4944 A 286 SUH 660 2.4615 SG(UP)-NiMo 27
1.4959 X 5 NiCrAlTi 2.4617 N NiMo 28 NiMo 28
32 21 10665
1.4980 660 X 5 CrNiTi 286 S 31 S66286 X 6 Z 6 NCTDV 2.4618 NiCr 22 Mo 6 Cu
COUNTERBORING
26 15 NiCrTiMoVB 25.15 B
21-15-2 2.4619 N NiCr 22
TOOLS
2.4053 Alloy 222 06985 Mo 7 Cu
(Ni99,7Mg0,07) 2.4626 SG-NiCr 23 Al NA 49
2.4060 Ni 99,6 NA 46 2.4627 SG-NiCr 22 NA 50
2.4061 LC-Ni 99, 6 Co 12 Mo
2.4066 N Ni 99, 2 NA 11 2.4630 N NiCr 20 Ti HR5 NC 20 T Nimonic 75
PRECISION HOLE
02200 06075
FINISHING
2.4068 LC-Ni 99 NA 12 2.4632 NiCr 20 Co 18 Ti NA 36 N07090 Nimonic 90
2.4106 NiMn 1 2.4634 NiCo 20 Cr N13021 Nimonic
2.4108 NiMn 1 C 15 MoAlTi 105
2.4109 NiMn 1, 5 2.4636 NiCr 15 Cr 15 HR4 Nimonic
2.4110 NiMn 2 MoAlTi(Alloy115) 115
2.4122 NiMn 3 Al 2.4637 NiCr 22 Mo
INSERTS
2.4126 NiMn 3 SiMg 8 AlCuTi
2.4145 NiCr 2 Mn 2.4639 SG-NiCr 20 NA 34
2.4146 NiCr 2 MnSi 2.4641 NiCr 21 NCF
2.4151 NiCr 5 MnSi Mo 6 Cu 600 TP
2.4155 SG-NiTi 4 NA32 NA 32 2.4642 N NiCr 29 Fe NCF 690 NC 30 Fe Inconel 690
2.4170 SZ- G-Ni 95
TECHNICAL DATA
06690
100 2.4647 NiCr 25 FeAlYC
2.4175 CZ- G-Ni 93 C 2.4650 N NiCo 20 NA 38 NCK 20 D Nimonic
100 07263 Cr 20 MoTi C-263
2.4180 G-Ni 93 Si 2.4652 EL-NiCr 26 Mo
2.4199 NiCr 4 Mn 2.4654 NiCr 19 Co Waspaloy
2.4360 N NiCu 30 Fe NA 13 NU 30 Monel 400 14 Mo 4 Ti
04400 2.4656 SG-NiCr 29 Mo
INDEX
2.4365 M 35 G-NiCu 30 Nb N24030 2.4658 NiCr 70 30 N06008

-1/2 2.4659 SG-NiCr 30
2.4366 EL-NiCu 30 Mn N04402 Mo 5 W
2.4367 M G-NiCu 30 Si 3 2.4660 N NiCr 20 CuMo
30-H 08020
2.4368 M- G-NiCu 30 Si 4 2.4661 EL-NiCr 29
255 Mo 5 W
Technical Data
SOLID CARBIDE
DRILLS

Number Number
MODULAR DRILLS
2.4662 NiCr 13 Nimonic 2.4831 SG-NICr 21 Mo

Mo 6 Ti 3 901 9 Nb
2.4663 N NiCr 23 Inconel 617 2.4836 NiCr 20 Mo 15
06617 Co 12 Mo 2.4839 SG-NiCr 20 Mo
2.4665 NiCr 22 NA 40 Hastelloy X 15
Fe 18 Mo 2.4851 N NiCr 23 Fe NCF 601 NC 23 Fe A Inconel 601
COMBINATION
TOOLS
2.4666 NiCr 18 CoMo 06601

2.4667 SG-NiCr 19 NA 51 2.4854 NiFe 33 Cr 25
NbMoTi Co
2.4668 N NiCr 19 INCONEL NC 19 Fe Nb Inconel 718 2.4855 NiCr 19 Mo9Si
07718 FeNbMo 718 2.4856 N NiCr 22 Mo 9 NA 21 NCF 625 N26625 NC 22 Fe DNb Inconel 625
2.4669 N NiCr 15 N07750 NC 15 Fe 7 TA Inconel 06625 Nb
CARBIDE TAPS
07750 Fe 7 TiAl X-750 2.4858 N NiCr 21 Mo NA 16 NCF 825 NC 21 Fe DU Incoloy 825

HSS AND
2.4670 G-NiCr 13 08825 TB

Al 6 Mo Nb 2.4867 NiCr 60 15
2.4671 G-NiCr 12 2.4869 NiCr 80 20
Al 6 MoNb 2.4872 NiCr 20 AlSi
2.4672 G-NiCr 20 2.4879 G-NiCr 28 W
Co 20 MoTi 2.4883 G-NiMo 16 Cr
INDEXABLE
DRILLS
2.4674 G-NiCo 15 2.4886 Sg-NiMo 16 cr NA 48

Cr 10 AlTiMo 16 W
2.4676 G-NiCo 10 2.4888 G-NiCr 13 MoAl
W 10 CrAlNb 2.4890 NiCr 45 23
2.4678 G-NiCr 50 2.4916 G-NiCr 19 Co
COUNTERBORING
2.4679 G-NiCr 35 2.4951 N NiCr 20 Ti HR 5 N06621 NC 20 T

2.4680 G-NiCr 50 Nb 06075
TOOLS
2.4681 CoCr 26 2.4952 N NiCr 20 TiAl NA 20 NCF 80 A NiCr 20 TiAl NC 20 TA

Ni 9 Mo 07080
2.4682 G-CoCr 25 NiW 2.4955 NiFe 25 Cr 20 NiFe 25 Cr NiFe 25 Cr
2.4683 CoCr 22 NiW NbTi 20 NbTi 20 NbTi
2.4685 N-7 M G-NiMo 28 Hastelloy B 2.4956
PRECISION HOLE
2.4686 CW- G-NiMo 17 CrW 2.4964 R CoCr 20 W HR 240 KC 22 WN L605

FINISHING
12 30605 15 Ni Haynes 25
MW 2.4969 NiCr 20 Co NA 19 N07090
2.4691 G-CoCr 28 Mo 18 Ti
2.4693 NiCr 25 Mo 7 Ti 2.4971
2.4710 NiMo 23 Cr 8 Fe 2.4972 NiCr 22 W
2.4711 CoCr 20 12 Fe
INSERTS
Ni15Mo 2.4973 AMS NiCr 19 Co 11 NC 19 KDT

2.4723 G-CoCr 29 Mo 5399 MoTi
2.4733 NiCr 22 2.4974
W 14 Mo 2.4975 NiFeCr 12 Mo
2.4764 NiCr 20 AlY 2.4976 NiCr 20 Mo
2.4765 NiCr 17 AlWY 2.4979 CoCr 28 MoNi
TECHNICAL DATA
2.4772 G-NiCr 20 2.4982 NiCr 20 CoMo

Co 20 MoTi 2.4983 NiCr 18 Co N07500
2.4775 CoCr33W 2.4987 NiCo 20 Cr
2.4778 G-CoCr 28 15 MoAlTi
2.4779 G-CoCr 28 Nb 2.4989 CoCr20NiW
2.4806 SG-NiCr 20 Nb NA 35 — NiCr17Mo NC17DWY Hastelloy C
2.4810 N-12 NiMo 30 ANC 15 Ni-Mo 28 Hastelloy C 17FeW
INDEX
MV
2.4813 G-NiCr 50 Nb
2.4816 N NiCr 15 Fe NA 14 NCF 600 N06040 NC 15 Fe Inconel 600
06600
2.4819 N NiMo 16 NC 17 D Nimonic
10276 Cr 15 W C-276
Technical Data
Workpiece Materials Listings — High-Temp Alloys — S2, S3
SOLID CARBIDE
DRILLS
Material AISI** DIN JIS BS UNS AFNOR UNI SIS AMS Material AISI** DIN JIS BS UNS AFNOR UNI SIS AMS
Number Number
MODULAR DRILLS
AMS Materials – S2 Inconel 718 5383,
Hastelloy C 5530 5589,
Hastelloy N 5607 5596,
Hastelloy S 5711 5662,
Hastelloy W 5587, 5663,
5755 5832
COMBINATION
Hastelloy X 5390, Inconel 5542,
TOOLS
5536, X-750 5582,
5587,
5598,
5588,
5667,
5798,
7237 5668,
Haynes 188 5608, 5670,
CARBIDE TAPS
5671,
HSS AND
5772
5801 5698,
In-100 5397 5699
Incoloy 901 5660 Stellite 31 5382,
5661 5789
Inconel 600 7232 Waspaloy 5704,
Inconel 625 5401 5706,
INDEXABLE
DRILLS
Inconel 625 5666 5707,
Inconel 713 C 5391 5708,
Inconel 713 LC 5377 5709,
7253
COUNTERBORING
TOOLS
S3 Titanium Tensile Strength RM (MPa)*: 900-1600 Hardness (HB): 300-400
Number Number
PRECISION HOLE
FINISHING
1.3993 NiCr 16 11 3.7065 R Ti 4 2 TA 6-9
2.4694 N NiCr 16 Inconel 751 50700
07751 Fe 7 TiAl 3.7124 TiCu 2 2 TA 21-24
3.7025 R Ti 1 2 TA 1 3.7195 TiAl 3 V2.5
50250 3.7225 R Ti 1 Pd TP 1
3.7035 R Ti 2 2 TA 2-5 52250
50400 3.7235 R Ti 2 Pd
INSERTS
3.7036 SG-Ti 2 52400
3.7055 R Ti 3 TA 3 3.7255 Ti 3 Pd
50550
TECHNICAL DATA
INDEX
Technical Data
Workpiece Materials Listings — High-Temp Alloys — S4, Hardened Steels & Irons — H1
SOLID CARBIDE
DRILLS

S4 Titanium Alloys Tensile Strength RM (MPa)*: 900-1600 Hardness (HB): 300-400
Material AISI** DIN BS JIS UNS EN AFNOR UNI SIS Material AISI** DIN JIS BS UNS AFNOR UNI SIS AMS
Number Number
MODULAR DRILLS
3.7105 "TiNi 0,8 AMS Materials – M1

Mo 0,3" TI- 4911,
3.7110 "TiAl 5 Fe 2,5" 6Al- 4928,
3.7115 TiAl 5 Sn 2 4V 4930,
3.7145 R TiAl 6 Sn 2 Zr 4 Mo 2 Si 4935,
4954,
COMBINATION
54620
4956,
TOOLS
3.7155 "TiAl 6 TA 43
ZrMo 0,5" 7460
3.7165 R TiAl 6 V 4 TA 10-13 T-A 6 V
56400
3.7175 R TiAl 6 V 6 Sn 2
56620
CARBIDE TAPS
HSS AND
3.7185 TiAl 4 Mo TA 45-51

4 Sn 2
TI- 4911,
6Al- 4928,
4V 4930,
4935,
4954,
INDEXABLE
DRILLS
4956,
7460
COUNTERBORING
TOOLS
Workpiece Material Conversion Table — H1

H1 Hardened Steels and Irons Hardness (HB): 450-750 / HRC: 48-65
PRECISION HOLE
FINISHING
Number Number
0.96 GX 200 0.964 G-X 300 Grade 3 B F45005 GJH-

CrNiMo 14 1 CrMoNi 15 2 1 X300CrMoNi
0.961 G-X 300 GJH- 15-2-1
NiMo 3 Mg X300NiMo 0.9645 A 532 GX 260 Grade 3 C F45007 GJH-
3 Mg IID20% CrMoNi 20 2 1 X260CrMoNi
INSERTS
0.962 A GX 260 NiCr 42 Grade 2 A 0512-00 F45001 GJH- 0512- CrMo 20-2-1
532 X260NiCr 00 -LC
IB 4-2 0.965 A 532 GX 260 Cr 27 Grade 3 D 0466-00 GJH-X
NiCr- III A 260Cr 27
LC 25%
TECHNICAL DATA
0.9625 A G-X 330 Grade 2 B 0513-00 F45000 GJH- FB Ni 4 0513- Cr

532 I NiCr 42 X330NiCr Cr2 HC 00 0.9655 A 532 G-X 300 Grade 3 E GJH-
A NiCr 4-2 III A CrMo 27 1 X300CrMo
-HC 25% 27-1
0.963 A G-X 300 Grade 2 C 0457-00 F45003 GJH- Cr
532 I CrNiSi 95 2 X300CrNiSi
D Ni- 9-5-2
HiCr
INDEX
0.9635 A 532 G-X Grade 3 A GJH-

IIC15% 300CrMo 15 3 X300CrMo
CrMo- 15-3
HC

Equivalencia - AC, Aleados, Inox, Fundiciones, Aleaciones de Cu y Otros 1 PDF

Uploaded by

Copyright:

Available Formats

Equivalencia - AC, Aleados, Inox, Fundiciones, Aleaciones de Cu y Otros 1 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Equivalencia - AC, Aleados, Inox, Fundiciones, Aleaciones de Cu y Otros 1 PDF

Uploaded by

Copyright:

Available Formats

Technical Data

Solid Carbide Drills — Troubleshooting Guide

(continued from previous page)

problem source solution

insufficient coolant • Check cooling lubricant. In the case of

• Check cutting parameters at exit. Reduce

hole too big

• Check clamping accuracy and torque

• Check drill diameter. Please notice that

drills are ground to a positive tolerance.

internal coolant supply, increase coolant

pressure. In the case of external coolant

cutting conditions • Reduce cutting speed; increase feed.

wrong drill • Check cutting-edge diameter.

• Check clamping accuracy and torque

workpiece movement • Stabilize workpiece chucking and check

wrong drill • Check drill type and drilling depth. Use

cutting conditions • Reduce feed at entry.

(continued on next page)

problem source solution

workpiece movement • Stabilize workpiece chucking and check stability

insufficient coolant • Check cooling lubricant. In the case of internal coolant

insufficient coolant • Check cooling lubricant. In the case of internal coolant

solution. They increase the productivity of the TX drill

SEFAS Chamfering Rings profile drilling tools (special)

Kennametal hydraulic chucks. High-precision drilled

holes can be provided with a chamfer in the same

BF tool for drilling, chamfering,

and spot facing

BF tool for drilling and profile

SEFAS chamfering ring for

SEFAS drilling and chamfering

Drilling on Inclined Surfaces

Surfaces with a greater inclination need a spot-face TECHNICAL DATA

Horsepower Calculations — Aluminum

TF105 Drill Torque

(750 sfm) TF105 Drill

drill diameter (inches) drill diameter (inches)

Feed Force & Power

drill diameter (inches) drill diameter (inches)

Feed Force & Power

(700 sfm) 30K PSI Gray Cast Iron

drill diameter (inches)

drill diameter (inches)

Feed Force & Power

drill diameter (inches)

drill diameter (inches)

Feed Force & Power

drill diameter (inches) drill diameter (inches)

SE225 Drill SE211HP Drill

drill diameter (inches) drill diamter (inches)

To quote a special tool, please contact our Custom Solutions department.

tapped hole with protection countersinking centering with protection countersinking

countersinking for aluminum rim drilling and facing

6,0 - 8,0 360.510 360.651 8 5.9 360.550 2 1.5 170.240

Mounting the KenTIP Inserts

Cooling the KenTIP Drill

only when using the 3 x D tool bodies

Why pre-center using PCM inserts?