Scribd
Upload
85 views3 pages

Wifi Led Better Ui

This document contains code to control GPIO pins on an ESP8266 WiFi module through a web server. It connects to a WiFi network, sets up a web server on port 80, then monitors for HTTP requests to turn the pins on or off. When a request is received, it will turn the corresponding pin high or low and return an HTML page with buttons to control the pins.

Uploaded by

lucca1x
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
85 views3 pages

Wifi Led Better Ui

This document contains code to control GPIO pins on an ESP8266 WiFi module through a web server. It connects to a WiFi network, sets up a web server on port 80, then monitors for HTTP requests to turn the pins on or off. When a request is received, it will turn the corresponding pin high or low and return an HTML page with buttons to control the pins.

Uploaded by

lucca1x
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

// Load Wi-Fi library

#include <ESP8266WiFi.h>

// Replace with your network credentials


const char* ssid = "Bloom Communication";
const char* password = "blo20uni17";

// Set web server port number to 80


WiFiServer server(80);

// Variable to store the HTTP request


String header;

// Auxiliar variables to store the current output state


String output5State = "off";
String output4State = "off";

// Assign output variables to GPIO pins


const int output5 = 13;
const int output4 = 14;

void setup() {
Serial.begin(115200);
// Initialize the output variables as outputs
pinMode(output5, OUTPUT);
pinMode(output4, OUTPUT);
// Set outputs to LOW
digitalWrite(output5, LOW);
digitalWrite(output4, LOW);

// Connect to Wi-Fi network with SSID and password


Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
// Print local IP address and start web server
Serial.println("");
Serial.println("WiFi connected.");
Serial.println("IP address: ");
Serial.println(WiFi.localIP());
server.begin();
}

void loop(){
WiFiClient client = server.available(); // Listen for incoming clients

if (client) { // If a new client connects,


Serial.println("New Client."); // print a message out in the serial
port
String currentLine = ""; // make a String to hold incoming data
from the client
while (client.connected()) { // loop while the client's connected
if (client.available()) { // if there's bytes to read from the
client,
char c = client.read(); // read a byte, then
Serial.write(c); // print it out the serial monitor
header += c;
if (c == '\n') { // if the byte is a newline character
// if the current line is blank, you got two newline characters in a row.
// that's the end of the client HTTP request, so send a response:
if (currentLine.length() == 0) {
// HTTP headers always start with a response code (e.g. HTTP/1.1 200
OK)
// and a content-type so the client knows what's coming, then a blank
line:
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println("Connection: close");
client.println();

// turns the GPIOs on and off


if (header.indexOf("GET /5/on") >= 0) {
Serial.println("LED on");
output5State = "on";
digitalWrite(output5, HIGH);
} else if (header.indexOf("GET /5/off") >= 0) {
Serial.println("GPIO 5 off");
output5State = "off";
digitalWrite(output5, LOW);
} else if (header.indexOf("GET /4/on") >= 0) {
Serial.println("GPIO 4 on");
output4State = "on";
digitalWrite(output4, HIGH);
} else if (header.indexOf("GET /4/off") >= 0) {
Serial.println("GPIO 4 off");
output4State = "off";
digitalWrite(output4, LOW);
}

// Display the HTML web page


client.println("<!DOCTYPE html><html>");
client.println("<head><meta name=\"viewport\" content=\"width=device-
width, initial-scale=1\">");
client.println("<link rel=\"icon\" href=\"data:,\">");
// CSS to style the on/off buttons
// Feel free to change the background-color and font-size attributes to
fit your preferences
client.println("<style>html { font-family: Helvetica; display: inline-
block; margin: 0px auto; text-align: center;}");
client.println(".button { background-color: #195B6A; border: none;
color: white; padding: 16px 40px;");
client.println("text-decoration: none; font-size: 30px; margin: 2px;
cursor: pointer;}");
client.println(".button2 {background-color: #77878A;}</style></head>");

// Web Page Heading


client.println("<body><h1>ESP8266 Web Server</h1>");

// Display current state, and ON/OFF buttons for GPIO 5


client.println("<p>GPIO 5 - State " + output5State + "</p>");
// If the output5State is off, it displays the ON button
if (output5State=="off") {
client.println("<p><a href=\"/5/on\"><button
class=\"button\">ON</button></a></p>");
} else {
client.println("<p><a href=\"/5/off\"><button class=\"button
button2\">OFF</button></a></p>");
}

// Display current state, and ON/OFF buttons for GPIO 4


client.println("<p>GPIO 4 - State " + output4State + "</p>");
// If the output4State is off, it displays the ON button
if (output4State=="off") {
client.println("<p><a href=\"/4/on\"><button
class=\"button\">ON</button></a></p>");
} else {
client.println("<p><a href=\"/4/off\"><button class=\"button
button2\">OFF</button></a></p>");
}
client.println("</body></html>");

// The HTTP response ends with another blank line


client.println();
// Break out of the while loop
break;
} else { // if you got a newline, then clear currentLine
currentLine = "";
}
} else if (c != '\r') { // if you got anything else but a carriage return
character,
currentLine += c; // add it to the end of the currentLine
}
}
}
// Clear the header variable
header = "";
// Close the connection
client.stop();
Serial.println("Client disconnected.");
Serial.println("");
}
}

You might also like