Safety Data Sheet Nitobond SBR: Revision Date: 04/06/2015 Revision: 3

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

Revision date: 04/06/2015 Revision: 3

SAFETY DATA SHEET


NITOBOND SBR

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier


Product name NITOBOND SBR

Product number 1726001UK9,1726004UK9,1726006UK9,1726010UK9

1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Polymeric additive for cementitious products.

1.3. Details of the supplier of the safety data sheet


Supplier FOSROC Limited
Drayton Manor Business Park
Coleshill Road
Tamworth
Staffordshire
B78 3XN
enquiryuk@fosroc.com
Tel. +44 (0) 1827 262222
Fax. +44 (0) 1827 262444

1.4. Emergency telephone number


Emergency telephone +44 (0) 1827 265 279 (08.30 to 17.00hrs Mon - Thu; 08.30 to 16.00hrs Fri)

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture


Classification
Physical hazards Not Classified

Health hazards Not Classified

Environmental hazards Not Classified

Human health See Section 11 for additional information on health hazards.

Environmental The product is not expected to be hazardous to the environment.

2.2. Label elements


Hazard statements NC Not Classified

2.3. Other hazards


This product does not contain any substances classified as PBT or vPvB.

SECTION 3: Composition/information on ingredients

3.2. Mixtures
Composition comments No classified ingredients, or those having occupational exposure limits,  present above the
levels of disclosure.

1/7
Revision date: 04/06/2015 Revision: 3

NITOBOND SBR

SECTION 4: First aid measures

4.1. Description of first aid measures


General information No specific recommendations. Move affected person to fresh air and keep warm and at rest in
a position comfortable for breathing.

Inhalation Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing. Get medical attention if any discomfort continues.

Ingestion Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse
mouth thoroughly with water. Get medical attention if any discomfort continues.

Skin contact Remove affected person from source of contamination. Remove contaminated clothing
immediately and wash skin with soap and water.

Eye contact Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15
minutes.

4.2. Most important symptoms and effects, both acute and delayed
General information No specific symptoms noted.

Inhalation In high concentrations: Irritation of nose, throat and airway. Coughing.

Ingestion May cause discomfort if swallowed.

4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations.

SECTION 5: Firefighting measures

5.1. Extinguishing media


Suitable extinguishing media The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.

5.2. Special hazards arising from the substance or mixture


Specific hazards Material can splatter above 100'C. Polymer film can burn. Irritant fumes.

Hazardous combustion Fire or high temperatures create: Carbon monoxide (CO). Carbon dioxide (CO2).
products Hydrocarbons.

5.3. Advice for firefighters


Protective actions during Move containers from fire area if it can be done without risk. No specific firefighting
firefighting precautions known. Control run-off water by containing and keeping it out of sewers and
watercourses.

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures


Personal precautions For personal protection, see Section 8.

6.2. Environmental precautions


Environmental precautions Avoid the spillage or runoff entering drains, sewers or watercourses.

6.3. Methods and material for containment and cleaning up

2/7
Revision date: 04/06/2015 Revision: 3

NITOBOND SBR

Methods for cleaning up Stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into
containers. Collect and place in suitable waste disposal containers and seal securely. Label
the containers containing waste and contaminated materials and remove from the area as
soon as possible. For waste disposal, see Section 13.

6.4. Reference to other sections


Reference to other sections For waste disposal, see section 13.

SECTION 7: Handling and storage

7.1. Precautions for safe handling


Usage precautions Good personal hygiene procedures should be implemented.

7.2. Conditions for safe storage, including any incompatibilities


Storage precautions Store in tightly-closed, original container in a dry, cool and well-ventilated place. Store in
closed original container at temperatures between 5°C and 30°C.

Storage class Chemical storage.

7.3. Specific end use(s)


Specific end use(s) The identified uses for this product are detailed in Section 1.2.

SECTION 8: Exposure Controls/personal protection

8.1. Control parameters

Ingredient comments No exposure limits known for ingredient(s).

8.2. Exposure controls

Protective equipment

Appropriate engineering Provide adequate general and local exhaust ventilation.


controls

Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible. The following protection should be worn: Chemical splash goggles or
face shield.

Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn if
a risk assessment indicates skin contact is possible. It is recommended that gloves are made
of the following material: Polyvinyl chloride (PVC). Rubber (natural, latex).

Other skin and body Wear appropriate clothing to prevent any possibility of skin contact. Wear apron or protective
protection clothing in case of contact.

Hygiene measures Do not smoke in work area. Wash hands at the end of each work shift and before eating,
smoking and using the toilet. Wash promptly if skin becomes contaminated. Promptly remove
any clothing that becomes contaminated. When using do not eat, drink or smoke.

Respiratory protection No specific recommendations.

SECTION 9: Physical and Chemical Properties

9.1. Information on basic physical and chemical properties


Appearance Liquid.

3/7
Revision date: 04/06/2015 Revision: 3

NITOBOND SBR

Colour White.

Odour Characteristic.

Odour threshold Not determined.

pH pH (concentrated solution): 10 - 11.5

Melting point 0°C

Initial boiling point and range ~100°C @ 1 atm

Flash point Not applicable.

Flammability (solid, gas) Not applicable.

Upper/lower flammability or The product is not flammable.


explosive limits

Other flammability Not applicable.

Vapour pressure 17.5 mm Hg @ 20°C

Vapour density 0.6

Relative density 0.95 - 1.10 @ °C

Bulk density Not applicable.

Solubility(ies) Miscible with water.

Auto-ignition temperature Not applicable.

Viscosity <1000 mPa s @ 20°C

Explosive properties Not considered to be explosive.

Explosive under the influence Not considered to be explosive.


of a flame

Oxidising properties Does not meet the criteria for classification as oxidising.

9.2. Other information


Other information Not available.

SECTION 10: Stability and reactivity

10.1. Reactivity
Reactivity There are no known reactivity hazards associated with this product.

10.2. Chemical stability


Stability Stable at normal ambient temperatures.

10.3. Possibility of hazardous reactions


Possibility of hazardous Will not polymerise.
reactions

10.4. Conditions to avoid


Conditions to avoid Avoid excessive heat for prolonged periods of time. Avoid freezing. Dry product is
combustible.

10.5. Incompatible materials


Materials to avoid Strong acids.

4/7
Revision date: 04/06/2015 Revision: 3

NITOBOND SBR

10.6. Hazardous decomposition products


Hazardous decomposition Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or
products vapours. Oxides of carbon.

SECTION 11: Toxicological information

11.1. Information on toxicological effects


Toxicological effects This product has low toxicity.

General information No specific health hazards known.

Inhalation Low volatility makes inhalation unlikely at ambient temperature. Gas or vapour in high
concentrations may irritate the respiratory system. Symptoms following overexposure may
include the following: Coughing.

Skin contact Unlikely to irritate on brief or occasional exposure. Prolonged and frequent contact may cause
redness and irritation.

Eye contact Vapour or spray in the eyes may cause irritation and smarting.

Medical symptoms No specific symptoms noted, but this chemical may still have adverse health impact, either in
general or on certain individuals.

SECTION 12: Ecological Information

Ecotoxicity The product components are not classified as environmentally hazardous. However, large or
frequent spills may have hazardous effects on the environment.

12.1. Toxicity
Toxicity Not considered toxic to fish.

12.2. Persistence and degradability


Persistence and degradability The product is not expected to be biodegradable.

12.3. Bioaccumulative potential


Bioaccumulative potential The product does not contain any substances expected to be bioaccumulating.

12.4. Mobility in soil


Mobility The product is miscible with water. May spread in water systems.

12.5. Results of PBT and vPvB assessment


Results of PBT and vPvB This substance is not classified as PBT or vPvB according to current EU criteria.
assessment

12.6. Other adverse effects


Other adverse effects Not applicable.

SECTION 13: Disposal considerations

13.1. Waste treatment methods


General information When handling waste, the safety precautions applying to handling of the product should be
considered.

Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.

SECTION 14: Transport information

5/7
Revision date: 04/06/2015 Revision: 3

NITOBOND SBR

General The product is not covered by international regulations on the transport of dangerous goods
(IMDG, IATA, ADR/RID).

14.1. UN number
Not applicable.

14.2. UN proper shipping name


Not applicable.

14.3. Transport hazard class(es)


No transport warning sign required.

14.4. Packing group


Not applicable.

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant


No.

14.6. Special precautions for user


Not applicable.

14.7. Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations The Control of Substances Hazardous to Health Regulations 2002 (SI 2002 No. 2677) (as
amended).
The Chemicals (Hazard Information and Packaging for Supply) Regulations 2009 (SI 2009
No. 716).

EU legislation Commission Regulation (EU) No 453/2010 of 20 May 2010.


Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances and mixtures (as
amended).
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).

Guidance Workplace Exposure Limits EH40.

Authorisations (Title VII No specific authorisations are known for this product.
Regulation 1907/2006)

Restrictions (Title VIII No specific restrictions on use are known for this product.
Regulation 1907/2006)

15.2. Chemical safety assessment


No chemical safety assessment has been carried out.

SECTION 16: Other information

6/7
Revision date: 04/06/2015 Revision: 3

NITOBOND SBR

Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision.

Revision date 04/06/2015

Revision 3

SDS number 12862

Risk phrases in full NC Not classified.

This information relates only to the specific material designated and may not be valid for such material used in combination
with any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurate
and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or
completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.

7/7

You might also like