0% found this document useful (0 votes)
739 views2 pages

Exercises Problem No. 2 Keys and Coupling-1

This document provides an example problem on sizing the components of a flange coupling connecting two 1 7/16 inch shafts. The problem involves determining: (1) the diameter of the bolts in mm, given they are arranged in a 5 inch bolt circle and must withstand a torque of 8000 lb-in at 350 rpm with a safety factor of 5; (2) the thickness of the flange in mm; and (3) the power transmitted in kW. Formulas are provided and calculations are shown to solve for each unknown value.

Uploaded by

Ariel Gamboa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
739 views2 pages

Exercises Problem No. 2 Keys and Coupling-1

This document provides an example problem on sizing the components of a flange coupling connecting two 1 7/16 inch shafts. The problem involves determining: (1) the diameter of the bolts in mm, given they are arranged in a 5 inch bolt circle and must withstand a torque of 8000 lb-in at 350 rpm with a safety factor of 5; (2) the thickness of the flange in mm; and (3) the power transmitted in kW. Formulas are provided and calculations are shown to solve for each unknown value.

Uploaded by

Ariel Gamboa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Module 5: Activity No.

Exercises Problem on Keys and Couplings

Name: Gamboa, Ariel C.

Student No. 20151157958

Problem:

Two 1 7/16 in shafts are connected by a flange coupling. The flanges are fitted with 6
bolts of SAE 1020 steel annealed on a 5 in bolt circle. The shafts run at 350 rpm and
transmits 8000 lb-in. Assume a factor of safety of 5 and determine:

a. Diameter of the bolt in mm;

b. Thickness of the flange in mm and

c. Power transmitted in kW.

Given:

7 23
D=1 ∈¿ ∈¿
16 16

N b =6 ;

B=5∈. ;

n=350 rpm

T =8000 lb−¿ . ; FS=5

SO L' N

A . ¿ DIAMETER OF THE BOLT

σ y 42000
τ b= = =8400 psi
FS 5
8T 8(8000)
τ b= 2
; 8400=
B Nb π d (5) (6) (π ) ¿ ¿

B .¿ THICKNESS OF THE FLANGE

2T 2 ( 8000 )
σ b= ; 8400= ; f =0.23∈. ¿
B N b df ( 5 ) (6 )( 0.28 )( f )

C . ¿ POWER TRANSMITTED

Tn ( 8000 ) ( 350 ) 0.746 kW


P=
63025
=
63025
=44.43 HP (
1 HP
=33.14 KW)

You might also like