Order this document
SEMICONDUCTOR TECHNICAL DATA by MBRD835L/D
DPAK Surface Mount Package
This SWITCHMODE power rectifier which uses the Schottky Barrier principle
Motorola Preferred Device
with a proprietary barrier metal, is designed for use as output rectifiers, free
wheeling, protection and steering diodes in switching power supplies, inverters
and other inductive switching circuits. This state of the art device has the following
features:
• Low Forward Voltage SCHOTTKY BARRIER
• 125°C Operating Junction Temperature RECTIFIER
8 AMPERES
• Epoxy Meets UL94, VO at 1/8″
35 VOLTS
• Guaranteed Reverse Avalanche
• Compact Size
• Lead Formed for Surface Mount
Mechanical Characteristics 4
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately) 1 1
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads 4 3
3
are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes: CASE 369A–13
260°C Max. for 10 Seconds DPAK PLASTIC, STYLE 3
• Shipped 75 units per plastic tube
• Available in 16 mm Tape and Reel, 2500 units per 13″ reel, by
adding a “T4” suffix to the part number
• Marking: B835L
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage VRRM 35 Volts
Working Peak Reverse Voltage VRWM
DC Blocking Voltage VR
Average Rectified Forward Current IF(AV) 8 Amps
(At Rated VR) TC = +88°C
Peak Repetitive Forward Current IFRM 16 Amps
(At Rated VR, Square Wave, 20 kHz) TC = + 80°C
Non–Repetitive Peak Surge Current IFSM 75 Amps
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
Repetitive Avalanche Current IAR 2 Amps
(Current Decaying Linearly to Zero in 1 µs, Frequency Limited by TJmax)
Storage Temperature Tstg – 65 to +150 °C
Operating Junction Temperature TJ – 65 to +125 °C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/µs
THERMAL CHARACTERISTICS
Thermal Resistance — Junction to Case RθJC 6 °C/W
Thermal Resistance — Junction to Ambient(1) RθJA 80 °C/W
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage(2) (iF = 8 Amps, TC = + 25°C) VF 0.51 Volts
(iF = 8 Amps, TC = +125°C) 0.41
Maximum Instantaneous Reverse Current(2) (Rated dc Voltage, TC = + 25°C) IR 1.4 mA
(Rated dc Voltage, TC = +100°C) 35
(1) Rating applies when surface mounted on the minimum pad size recommended.
(2) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2%.
SWITCHMODE is a trademark of Motorola, Inc.
Preferred devices are Motorola recommended choices for future use and best overall value.
Rev 1
Rectifier Device
Motorola, Inc. 1996 Data 1
MBRD835L
TYPICAL CHARACTERISTICS
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
iF, INSTANTANEOUS FORWARD CURRENT (mA
10 10
TJ = 125°C 25°C TJ = 125°C
1 1
75°C
0.1 0.1
25°C
0.01 0.01
0 0.1 0.2 0.3 0.4 0.5 0.6 0 0.1 0.2 0.3 0.4 0.5 0.6
vF, INSTANTANEOUS VOLTAGE (VOLTS) vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Maximum Forward Voltage Figure 2. Typical Forward Voltage
1000
100
100 TJ = 125°C TJ = 125°C
I R, REVERSE CURRENT (mA)
I R, REVERSE CURRENT (mA)
10 100°C
10 100°C
1 1
75°C
25°C
0.1
0.1
0.01
25°C
0.001 0.01
0 5 10 15 20 25 30 35 0 5 10 15 20 25 30 35
VF, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Maximum Reverse Current Figure 4. Typical Reverse Current
TJ = 25°C
TYPICAL
MAXIMUM
1000
C, CAPACITANCE (pF)
100
1 10
VR, REVERSE VOLTAGE (VOLTS)
Figure 5. Maximum and Typical Capacitance
2 Rectifier Device Data
MBRD835L
TYPICAL CHARACTERISTICS
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
16 8
TJ = 125°C RθJA = 40°C/W
14.4 TJ = 125°C 7 dc
RθJA = 6°C/W SURFACE MOUNTED ON
12.8
dc 6 MININUM RECOMMENDED
11.2 π (RESISTIVE LOAD) PAD SIZE
5 π (RESISTIVE LOAD)
9.6
8
SQUARE WAVE
IPK
+ 5
(CAPACITIVE
4
SQUARE WAVE
IPK
IAV
+ 5 (CAPACITIVE
LOAD)
IAV LOAD)
6.4 3
4.8 10
10 2
3.2
1.6 1 20
20
0 0
80 85 90 95 100 105 110 115 120 125 130 0 10 20 30 40 50 60 70 80 90 100 110 120 130
TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C)
Figure 6. Current Derating, Infinite Heatsink Figure 7. Current Derating
P F(AV), AVERAGE FORWARD POWER DISSIPATION (WATTS)
5
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
8
TJ = 125°C RθJA = 80°C/W TJ = 125°C
4.5 dc
7 π (RESISTIVE LOAD)
SURFACE MOUNTED ON
+ 5 (CAPACITIVE
4 SQUARE WAVE dc
π MININUM RECOMMENDED 6
IPK
3.5 (RESISTIVE LOAD) PAD SIZE IAV LOAD)
3 5
2.5
SQUARE WAVE IPK
IAV
+ 5
(CAPACITIVE
LOAD) 4
10
20
2 3
1.5 10
2
1
0.5 20 1
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 0 1.5 3 4.5 6 7.5 9 10.5 12 13.5 15
TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 8. Current Derating, Free Air Figure 9. Forward Power Dissipation
Rectifier Device Data 3
MBRD835L
PACKAGE DIMENSIONS
0.165 0.118
4.191 3.0
0.100
2.54
0.063
1.6
0.190 0.243
4.826 6.172
–T– SEATING
PLANE
inches
B C mm
V R E DPAK FOOTPRINT
4
Z
A NOTES:
S 1. DIMENSIONING AND TOLERANCING PER ANSI
1 2 3 Y14.5M, 1982.
U 2. CONTROLLING DIMENSION: INCH.
K
INCHES MILLIMETERS
DIM MIN MAX MIN MAX
F J A 0.235 0.250 5.97 6.35
L B 0.250 0.265 6.35 6.73
H C 0.086 0.094 2.19 2.38
STYLE 3: D 0.027 0.035 0.69 0.88
D 2 PL PIN 1. ANODE E 0.033 0.040 0.84 1.01
2. CATHODE F 0.037 0.047 0.94 1.19
G 0.13 (0.005) M T 3. ANODE G 0.180 BSC 4.58 BSC
4. CATHODE H 0.034 0.040 0.87 1.01
J 0.018 0.023 0.46 0.58
K 0.102 0.114 2.60 2.89
L 0.090 BSC 2.29 BSC
R 0.175 0.215 4.45 5.46
S 0.020 0.050 0.51 1.27
U 0.020 ––– 0.51 –––
V 0.030 0.050 0.77 1.27
CASE 369A–13 Z 0.138 ––– 3.51 –––
ISSUE Y
DPAK
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315
Mfax: [email protected] – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
4 ◊ CODELINE TO BE PLACED HERE Rectifier Device Data
MBRD835L/D
