Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    DESIGN OF SLAB AT EL+7.6m (5.105 M X3.74 M) Grid1-2

    Uploaded by

    Muhammad Hasan
    This document summarizes the design of a 150mm thick slab that is 5.105m x 3.74m. It includes calculations of dead and live loads, bending moments, required reinforcement, shear capacity, and deflection check. The slab requires 10mm diameter bars spaced at 200mm centres in both short and long directions to resist the bending moments of up to 10.179kN-m and shear forces up to 22.167kN, which are below the slab's capacity. Deflection checks are also satisfied under the given loads and reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    DESIGN OF SLAB AT EL+7.6m (5.105 M X3.74 M) Grid1-2

    Uploaded by

    Muhammad Hasan
    26 views4 pages
    This document summarizes the design of a 150mm thick slab that is 5.105m x 3.74m. It includes calculations of dead and live loads, bending moments, required reinforcement, shear capacity, and deflection check. The slab requires 10mm diameter bars spaced at 200mm centres in both short and long directions to resist the bending moments of up to 10.179kN-m and shear forces up to 22.167kN, which are below the slab's capacity. Deflection checks are also satisfied under the given loads and reinforcement.

    Original Title

    SLAB

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a 150mm thick slab that is 5.105m x 3.74m. It includes calculations of dead and live loads, bending moments, required reinforcement, shear capacity, and deflection check. The slab requires 10mm diameter bars spaced at 200mm centres in both short and long directions to resist the bending moments of up to 10.179kN-m and shear forces up to 22.167kN, which are below the slab's capacity. Deflection checks are also satisfied under the given loads and reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    26 views4 pages

    DESIGN OF SLAB AT EL+7.6m (5.105 M X3.74 M) Grid1-2

    Uploaded by

    Muhammad Hasan
    This document summarizes the design of a 150mm thick slab that is 5.105m x 3.74m. It includes calculations of dead and live loads, bending moments, required reinforcement, shear capacity, and deflection check. The slab requires 10mm diameter bars spaced at 200mm centres in both short and long directions to resist the bending moments of up to 10.179kN-m and shear forces up to 22.167kN, which are below the slab's capacity. Deflection checks are also satisfied under the given loads and reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    DESIGN OF SLAB AT EL+7.6m ( 5.105 M X3.

    74 M ) grid1-2

    Slab thickness = 150 mm


    50 mm thk floor finish = 50 mm

    Dead Load
    150 mm thk slab 0.15x25= = 3.750 KN/m2
    Floor finish (plaster) = 0.025 KN/m2
    50 mm thk floor finish 0.05x25= = 1.250 KN/m2
    Floor finish (total) = 1.275 KN/m2
    Floor finish (assumed) = 1.500 KN/m2
    total = 5.250 KN/m2

    Live Load
    L.L = 5.00 KN/m2
    = 5.00 KN/m2

    total = 5.00 KN/m2


    Total D.L+L.L= 5.25+5= = 10.250 KN/m2

    Ly = 5.11 m
    Lx = 3.74 m
    Ly/Lx = 1.36 <2 It is a two way slab

    Refer IS: 456 Table 26:


    Type of panel: Two adjacent edges discontinuous
    Case no. 4
    - 0.071 -a y = 0.0470
    a =
    a x= ay=
    x 0.0530 0.0350

    Max (-) ve momen -ax w lx


    2

    -0.071x10.25x3.74^2
    = 10.179 KN-m
    Max (+) ve momenax w lx
    2

    0.053x10.25x3.74^2
    = 7.599 KN-m

    Max (-) ve momen -ay w lx


    2

    -0.047x10.25x3.74^2 = 6.739 KN-m

    Max (+) ve momenay w lx


    2

    0.035x10.25x3.74^2 = 5.018 KN-m


    Clear cover = 20 mm
    fck = 25 N/mm2
    Fy = 500 N/mm2
    Load factor = 1.50
    For Support in short direction
    M = 10.179 KN-m
    Mu = 15.2685 KN-m
    dia of bar = 10 mm
    d= 150-20-10-10/2 = 115 mm
    Mu/bd2 15.2685x10^6/(1000x115^2) = 1.155 N/mm2

    Pt required = 0.281 %
    Min PT = 0.12 %
    Hence ,Pt required 0.281 %
    Ast 0.281x1000x115/100 = 323.15 mm2
    Max spacing required = 243.04 mm
    Spacing provided = 200 mm
    Ast provided = 392.7 mm2
    Provide 10 dia @200c/c(392.7cm2) at top in short direction

    For Span in short direction


    M = 7.599 KN-m
    Mu = 11.3985 KN-m
    dia of bar = 10 mm
    d 150-20-10-10/2 = 115 mm
    Mu/bd2 11.3985x10^6/(1000x115^2) = 0.862 N/mm2

    Pt required = 0.207 %
    Min PT 0.12 %
    Hence ,Pt required 0.207 %
    Ast 0.207x1000x115/100 = 238.05 mm2

    Max spacing required = 329.93 mm


    Spacing provided = 200 mm
    Ast provided= = 392.7 mm2
    Provide 10 dia @200c/c(392.7cm2) at bottom in short direction

    For Support in long direction


    M = 6.739 KN-m
    Mu = 10.1085 KN-m
    dia of ba = 10 mm
    d 150-20-10-10/2 = 115 mm
    Mu/bd2 10.1085x10^6/(1000x115^2) = 0.764 N/mm2

    Pt required 0.182 %
    Min PT 0.12 %
    Hence ,Pt required 0.182 %
    Ast 0.182x1000x115/100 = 209.3 mm2

    Max spacing required = 375.25 mm


    Spacing provided = 200 mm
    = 392.7 mm2
    Provide 10 dia @200c/c(392.7mm2) at top in long direction

    For Span in long direction


    M = 5.018 KN-m
    Mu = 7.527 KN-m
    dia of ba = 10 mm
    d 150-20-10-10/2 = 115 mm
    Mu/bd2 7.527x10^6/(1000x115^2) = 0.569 N/mm2

    Pt required = 0.134 %
    Min PT 0.12 %
    Hence ,Pt required = 0.134 %

    Ast = 154.1 mm2


    0.134x1000x115/100
    Max spacing required 509.67 mm
    Spacing provided 200 mm
    392.7 mm2
    Provide 10 dia @200c/c(392.7mm2) at bottom in long direction

    Check for shear x direction


    b= 8.512
    Pt provided = 0.341 %
    tc = 0.417 N/mm2
    Shear capacity 0.417x1000x115 = 47.955 KN

    Shear at middle of short


    span (due to DL+LL load) 10.25x3.74/3 +2 = 14.778 KN

    Vu 1.5x14.778 = 22.167 KN < 47.955 KN ok

    Check for shear y direction


    b 8.5125
    Pt provided = 0.341 %
    tc = 0.417 N/mm2
    Shear capacity 0.417x1000x115/10000
    Shear at middle of = 47.955 KN
    Longspan (due to DL+LL
    load & point load of 2KN wlxk/(2k+1)
    10.25x3.74x1.36/(2x1.36+1) 14.01 KN

    Vu= = 1.5x14.01
    = 21.015 KN < 47.955 KN ok
    CHECK FOR DEFLECTION :-
    Effective span of Slab le 3740.00 MM
    Effective Span/Effective depth = l e /de 3740/115 = 32.5
    Percentage of reinforcement at mid span,p t,span = 0.28

    (0.58 x 500 x 238.05) /


    Service stress in tension reinforcement (f s ) (392.7) 175.79
    Modification factor for tension renforcement =2 (FIG. 4 OF IS 456:2000)
    Span /effective depth for cont.beam 26
    Modified value of span/effective depth 52 SATISFIED

    You might also like