Scribd
Upload
73 views

Arduino Quiz Buzzer

This instructable describes how to build a quiz buzzer using an Arduino Uno that supports up to two players. It uses an LED matrix display, push buttons, resistors, and a project box. The author provides details on gathering materials, assembling the circuit board, writing the code, and putting everything together in the project box. The total cost was about $21 and it took around 3 hours to complete.

Uploaded by

ace
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
73 views

Arduino Quiz Buzzer

This instructable describes how to build a quiz buzzer using an Arduino Uno that supports up to two players. It uses an LED matrix display, push buttons, resistors, and a project box. The author provides details on gathering materials, assembling the circuit board, writing the code, and putting everything together in the project box. The total cost was about $21 and it took around 3 hours to complete.

Uploaded by

ace
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

instructables

Arduino Quiz Buzzer

by shawneinstructables

Hey there! This is my first Instructable. The Quiz supports 2 players but can be easily extended to upto
buzzer plans kicked off when my colleague, who also 9 Players by modifying the code and adding more
hosts a game show asked for people who could build Pushbuttons. It cost me about INR 1500 ($21) and
a Quiz Buzzer. I took upon this project and with the with all the details, parts and plans i took about 3
help of few friends (Blaze and Errol) and Arduino i hours to get it done.
was able to accomplish this. Currently, this buzzer

Arduino Quiz Buzzer: Page 1


Step 1: Gather All the Materials

You will need

* 1 X Arduino Uno

* 1 X RED LED Matrix Display with MAX 7219 Driver

* 3 X 220 Ohm Resistors

* 1 X Perf Board

* 3 X Spring Push Speaker Terminal

* 3 X Push Button

* 15 meter twisted wire

* Project Box

* 10 X M3 Mounting Screw and Nuts

Arduino Quiz Buzzer: Page 2


Arduino Quiz Buzzer: Page 3
Step 2: The Circuit

Solder the Resistors and Wires on the Perf Board according to the schematic. Also, solder wires to the LED Matrix
.

Download
https://www.instructables.com/ORIG/FEE/Z205/JSL33TRY/FEEZ205JSL33TRY.fzz
…

Arduino Quiz Buzzer: Page 4


Step 3: Make the Handheld Pushbutton

Here I'm going to use a 7" length of PVC Pipe with pass the 5 meter long wire, i made a knot so that the
two end caps on either side. A hole is drilled into one contacts don't come off when the wires are pulled.
of the endcaps to secure the pushbutton. Additionally The end of the wired are stripped off the insulation
hot glue is used after soldering the wires to secure and coated with lead solder.
the contacts. On the other endcap a hole is drilled to

Arduino Quiz Buzzer: Page 5


Step 4: Upload the Code

Connect the Arduino Uno to the computer and upload the code.

Download
https://www.instructables.com/ORIG/FI1/MYNO/JSIUOISH/FI1MYNOJSIUOISH.ino
…

Step 5: Prepare the Project Box

I bought an empty Battery Eliminator Box and spray painted it black. Drilled holes to attach the speaker terminals
and two vertical slits to attach the LED matrix display. The front portion has one speaker terminal terminal which
will be used to reset the buzzer and the back contains two terminals for the contestants

Arduino Quiz Buzzer: Page 6


Step 6: Assemble the LED Matrix

Separate the LED Matrix from the driver board, now use the two vertical slits on the project box (shown in the
previous step) to pass the driver board from the inside and lock the LED matrix into place.

Arduino Quiz Buzzer: Page 7


Arduino Quiz Buzzer: Page 8
Step 7: Final Assembly

Attach the Arduino Uno and the Perfboard to the project box using Nuts and bolts.Solder the wires to the Speaker
terminals and secure all connections with hot glue.

Arduino Quiz Buzzer: Page 9


Step 8: Testing

Use a 5V adapter to power the device, i modified an old cellphone charger for this project. Connect the Handheld
Pushbutton to the Quiz Buzzer and test the Reset and Player buttons. And we are done!!

Arduino Quiz Buzzer: Page 10


Looks like such a fun project! I like the handheld pushbuttons :)

Arduino Quiz Buzzer: Page 11

You might also like