Introduction:

We've all been in this situation before: You have a HDD that you need to pull data off of but can't access
because the host system won't boot for some reason. The solution is straightforward but tedious, since you have
to remove the HDD and then install it into another system or drive enclosure so that you can run it. All of this is
extra trouble at a time when you clearly don't need any more of that. Wouldn't it be nice if there was something
that allowed you to easily and properly attach a HDD to a computer just to pull data off it?

Enter Vantec's new NexStar HDD Dock. Vantec is already well-known for their line of (among other things)
drive enclosures, so perhaps it was natural for them to come up with something like this. The NexStar Dock
allows you easily attach a 2.5" or 3.5" SATA drive and connects to your computer using either USB 2.0 or
eSATA, just like any other drive enclosure. Let's see if it's up to par.

Specifications:

The NexStar is functionally no different than any other drive enclosure out there, supporting both eSATA and
USB 2.0 connections. It nicely supports both 2.5" (notebook) and 3.5" SATA I/II HDDs as well as
Windows/Mac/Linux OSes. It also supports HDDs up to 1 TB in size, enough for most current HDDs I'm aware
of. Vantec also has included all required cables, as is usual with their products. You get a USB 2.0 cable as well
as an eSATA cable, along with a SATA to eSATA bracket to use inside your PC if your motherboard lacks an
eSATA port.

 Full Specifications

The biggest difference is of course, how you put the drive into the dock. There's no need to use screws or
brackets of any sort; you merely slide the HDD into a slot at the top and it slides into the proper connectors at
the bottom inside, sort of like a Super Nintendo cartridge. The drive protrude out from the top of the slot and to
remove it, there is a convenient eject button that pushes out the drive from the bottom so you don't have to
messily yank it out. (Again, like a SNES cartridge)

Looking at the Vantec HDD Dock, it sort of resembles a small single-slot toaster, perhaps something like you'd
expect from Apple if they came out with the iToaster. It comes well-protected and sits in the middle of the
package, which is good, since the entire unit is made of plastic. Aluminum would've been a more durable choice
for the dock's exterior, as it currently feels a little lightweight and flimsy compared to other normal drive
enclosures.

Vantec Hard Drive Dock. Packaged well. Lots of cables.

The rest of the package consists of a lot of cables. In fact, things are almost confusing since all the cables are
white. Basically, there is an AC adapter plus power cord, USB 2.0 cable, eSATA cable and eSATA adapter
bracket. As mentioned before, the eSATA adapter can convert one of your internal SATA ports into an external
one that is mounted on the expansion slot bracket. You also get a small user manual and driver CD. (Drivers
aren't needed for most operating systems) The eSATA cable is about 40" long and the USB 2.0 cable is around
50".

What's included. USB/eSATA cables. Size comparison.

Obviously, having yet another power "brick" is undesirable, but most drive enclosures also come with
something like this. The only other alternative would be to put the adapter into one cord and have the "brick" sit
at the plug end, which would still be a potential problem.

Looking at the top you can clearly see the eject button and the slot that the HDD slides into. The slot cover is L-
shaped and this allows it to support both 2.5" and 3.5" drives a very useful and nice feature. At the front is the
on/off button, surrounded by an LED ring that indicates when there's power. An LED below this indicates
activity. As expected, both are blue, since blue is the official colour of computer hardware LEDs.

AC adapter "brick". Top slot and eject button. Front indicators.

I sandwiched a small Swiss-Army knife in the slot opening so that you could see the connectors on the inside.
(Don't worry, it's not the blade attachment that's swung out but instead the relatively harmless nail file) You can
clearly see the SATA data and power connectors at the bottom, as well as a piece of plastic protruding from the
bottom next to it. This is the ejection mechanism and it's connected to the eject button, so when you push down
on the bottom, this pushes the HDD out from the bottom, very much like your SNES would do to a cartridge.
 Connectors inside the slot. Connections at the back. Feet on bottom for stability.

At the back are the power and data connections. The bottom has rubber feet for stability. Overall there are no
major complaints other than the all-plastic construction, which unfortunately makes the unit seem a little light-
weight and flimsy.

Installation:

Since the Hard Drive Dock is meant for quickly transferring files to and from a HDD, it's very easy to get up
and running. You simply insert a 2.5" or 3.5" SATA drive into the unit, with the top of the drive facing the front.
The connectors on the drive line up perfectly with the connectors in the dock, and then the dock is ready to be
plugged into your computer and turned on. Removing an HDD is equally easy; just make sure the unit is off (the
big on/off switch at the front is a hard switch) and then push down the eject button at the side; this pushes out
the HDD.

HDD inserted. Powered on.

In the above photos you can see a 500 GB Western Digital drive in place. As mentioned, the unit will also
support 2.5" drive, but unfortunately I had none lying around to test with. As with all external drive enclosures,
the additional power supply and cables tend to create a mess, but this is unavoidable.

As you can also see, the ring of light around the power button lights up during operation. An LED below this
flashes during activity.

Testing:

I tested the drive using both the eSATA interface and the USB 2.0 interface. As expected, transfer rates over
eSATA were much faster and akin to an internal drive's performance, while USB 2.0 is more convenient for
compatibility with almost any computer out there. It's nice to see that the Hard Drive Dock offers the best of
both worlds in this respect.

USB 2.0 transfer rates.

eSATA transfer rates.

With the eSATA interface, we see must faster transfer rates as well as lower CPU usage. Clearly, it's the
preferred method of connecting this device, provided it's available. Access times, however, remain the same as
with USB.

Conclusion:

The Vantec NexStar Hard Drive Dock lived up to its promise. It provides a convenient method of connecting
any SATA drive to your system so that you can easily access the data on it. Performance was up to par, but the
real benefit is from the design. During disaster recovery, you need something that's straightforward and easy to
use and won't add more trouble to your life. The NexStar Hard Drive Dock succeeds in this aspect.

As with most Vantec products you get the full deal: all required cables are included, along with an eSATA
bracket that can be used should your system lack an eSATA port. This is something that's really needed to take
full advantage of the device, as eSATA far surpasses USB 2.0 in every aspect. The Vantec NexStar Hard Drive
Dock won't be useful to everyone, but for people who tinker with systems a lot, or computer repair shops, it can
be very helpful.