Scribd
Upload
82 views2 pages

V.A.S Design & Infra Consultants Pvt. LTD: Design of Base Plate and Anchor Bolt

The document provides design details for anchor bolts and rebar for a tower foundation. It specifies the tower height, forces on the foundation, and properties of the anchor bolts and rebar. Calculations are shown for determining the required bolt diameter, bond length, and capacity of the foundation plate based on allowable stresses. The design of the rebar includes determining the required and final anchorage lengths.

Uploaded by

pankaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views2 pages

V.A.S Design & Infra Consultants Pvt. LTD: Design of Base Plate and Anchor Bolt

The document provides design details for anchor bolts and rebar for a tower foundation. It specifies the tower height, forces on the foundation, and properties of the anchor bolts and rebar. Calculations are shown for determining the required bolt diameter, bond length, and capacity of the foundation plate based on allowable stresses. The design of the rebar includes determining the required and final anchorage lengths.

Uploaded by

pankaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SITE NAME SITE ID TOWER HT.

DATE

V.A.S DESIGN & INFRA CONSULTANTS PVT. LTD


VELDEL223107 9M 12.03.2020
BAPU DHAM

DESIGN OF BASE PLATE AND ANCHOR BOLT


TOWER HT. DETAIL OF = 9 M
MAX. COMPRESSIVE FORCE = 18.0 KN
MAX. TENSIL FORCE = 15.1 KN
MAX SIDE THRUST = 4.5 KN
NO OF H. D. BOLTS PROPOSED = 4 NOS
AXIAL FORCES IN EACH BOLTS = 3.78 KN
SHEAR FORCE IN EACH BOLTS = 1.13 KN
GRADE OF CONCRETE IN PEDESTAL = 20.00 M

DESIGN OF ANCHOR BOLT


PERMISSIBLE STRESS FOR BOLTS OF PROPERTY CLASS OF 4.6 GRADE AS PER TABLE-1, IS:802 (PART-1/SEC-2)-1992

PERMISSBLE STRESS IN SHEAR = 218.00 N/mm^2


PERMISSBLE STRESS IN AXIAL TENSION = 194.00 N/mm^2
GROSS AREA OF THE BOLT REQD. = 27.03 mm^2
3.775/194X0.72
DIAMETER OF BOLT REQUIRED = 5.77 mm

DIAMETER OF BOLT PROVIDED = 16 mm


ACTUAL AXIAL STRESS IN EACH BOLT = 26.09 N/mm^2
ACTUAL AXIAL STRESS IN EACH BOLT 5.60 N/mm^2

CHECK FOR COMBINED STRESS 0.1774 < 1.2


26.09/218+5.6/194+5.6/194 Safe

PERMISSIBLE STRESS IN BOND IN = 0.8 N/mm^2


PLANE BAR AS PER TABLE-21 OF IS: 456: 2000

CAPACITY OF PLATE
LENGTH BREDTH THICKNESS
SIZE OF THE PLATE PROVIDED = 300 300 10
AREA OF PLATE'S TOP FACE = 90000 mm^2

PERMISSIBLE STRESS IN CONCRETE IN = 5 N/mm^2


BEARING ( AS PER IS 456-2000)
CAPACITY OF PLATE IN BEARING = 450000 N
WITH CONCRETE OR = 450 KN

GROUT LENGTH OF THE BOLT REQUIRED


= 62.1 mm
SITE NAME SITE ID TOWER HT. DATE

V.A.S DESIGN & INFRA CONSULTANTS PVT. LTD


VELDEL223107 9M 12.03.2020
BAPU DHAM

MAX FOUNDATION FORCES ACTING ON BUILDING COLUMN:


Down Thrust = 18.00 KN
Side Thrust = 4.50 KN

Uplift = 15.10 KN
Side Thrust = 4.50 KN
DESIGN OF HILITY REBARING

Determination of Basic Anchorage Length :

Lb (reqd.) = (Ds/4)X( st/fbd)

Where As
Ds = Diameter of Rebar
st = Calculated Design Stress of Rebar
fbd = Design Value of ond strength

Assume Diameter of Rebar = 16 mm


Assume No of Bars = 4 mm
Calculated Design Stress of Rebar = 33.57 N/mm^2

Design value of bond strength = 1.9 N/mm^2 For 40mm Cover


As Per Hilty Manual

Lb (reqd.) = 71 mm

Lbd = 1 x 2 x 3 x 42 x 5x Lbd(Reqd)
Where
1 = Effect of Form of the forms of Bars
2 = Effect of minimum Concrete cover
3 = Effect of Confinment of Transeverse Reinforcement

4 = Effect of infulence of one of more wleded Bars


along with Design Annchorage Length,
5 = Effect of Pressure Transverse to the Plane of
Splitting along with Design Anchorage Length

For compression = 1x 2x 3x 4 = 1

Lbd (10xDs) = 70.6771943227052*1

lbd (min) 70.68 mm

Provide 100 mm depth for the Hilti Rebar with RE500 Compound (As per the site condition)

You might also like