High Purity

Filtration Solutions
Cleanroom Components
 AstroFan FFU Technical data

ASTROFAN FAN FILTER UNIT Nominal Size FFU 66 FFU 69 FFU 612 FFU 612 SL FFU 912 FFU 1212
Airflow m³/h 520 800 1080 1080 1650 2220
Actual dimensions L x W [mm] 570 x 570 570 x 870 570 x 1170 570 x 1170 870 x 1170 1170 x 1170
Height including filter1 [mm] 445 445 445 275 445 445
Product description
Extra height for a RSC execution 30 30 30 30 30 30
The AstroFan FFU module comprises of an aluminium The ideal solution to minimize your planned and unplanned 220 - 240V 220 - 240V 220 - 240V 220 - 240V 220 - 240V 220 - 240V
housing (2,0 mm) containing a high performance cleanroom downtime costs by offering: Power supply 1 Phase 1 Phase 1 Phase 1 Phase 1 Phase 1 Phase
encapsulated AAF Optimized direct driven backward curved • More Flexibility 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
EC fan/motor combination and a replaceable AAF HEPA or • More Safety Power consumption EBM Bus 0,41 kW 0,41 kW 0,32 kW 0,29 kW 0,32 kW 0,32 kW
ULPA filter. • More Convenience Power consumption MOD Bus RTU 0,50 kW 0,50 kW 0,50 kW 0,47 kW 0,50 kW 0,50 kW
The entire housing is easy to decontaminate and resistant to • More Cost Savings
Weight including filter 22 kg 24 kg 31 kg 28 kg 47 kg 59 kg
disinfectants. The housing seals and rests on the anodized • More Reliability
aluminium extrusions of the AAF HEPA or ULPA filter. The Fan resistance (Pa) 600 590 370 580 345 300
14 mm flat flange of the filter rests on the dry gasket, applied Sound Pressure Level at 0,45 m/s (dB(A)) 49 45 44 55 47 55
into the ceiling grid. Filter Media Types Glassfiber / Membrane
• Available in 7 standard sizes
Efficiency H13 to U17
Reduced energy consumption and less noise • Lightweight aluminium housing
thanks to AAF Optimized fan design. • Low sound level Installation Options Top side / Roomside change frame / Roomside change grid
• Suitable for all ISO cleanroomclasses Accessories Coolong Coils / Prefilter / AMC Filter / Diffuser / Test port
AAF centrifugal fans with backward-curved blades are the • Suitable for turbulent and laminar flow Control Platform PC / PLC / IoT / Manual
new standard in ventilation and air-conditioning. AAF Fans • Suitable for a wide range of AAF HEPA and ULPA filters
include both noise minimization and a further decrease in • Available with EC RS-485, 0-10 Volt and MODBUS RTU
energy consumption. The optimized impeller with backward- control interface
Note 1.The AstroFan FFU 612 SL includes for a 2”filter (50 mm pack). All others have a 3” (72 mm media pack).
curved blades is made of fiberglass-reinforced plastic, Note 2. Power consumption is based on EBM Bus motors.
enabling an aerodynamically optimized shape that cuts the
noise level in half and reduces power requirements
significantly.

Adaptation to local conditions

AAF has dedicated software to determine the exact working point of the AstroFan FFU in the installation.
Please contact AAF for more information.

Note: AstroFan FFU 1212 displayed without installed filter.

The AAF AstroFan Filter Unit (FFU) is a self-contained ceiling fan filter module, designed for use in turbulent mixing and laminar
airflow cleanroom areas. The unit is designed for utilization in the AAF 50 mm, 55 mm T-Bar ceiling grid, the AstroDry HD ceiling
grid and compatible ceiling grids. The lightweight unit is easy to install. Typical applications include cleanrooms
ISO.EN 14644-1,Class 5 (Class M 3.5 (100) to US Federal Standard 209E).

2 3
 Maximized System Integrity
ASTROFAN CONTROL AND INSTALLATION OPTIONS

Fully integrated Control Systems down to the

single FFU

In addition to air filters and non-powered supply housings,

certain applications also require unit specific control of the PLC Program Logical Control
speed and consistency of airflow into large-scale production
spaces. Fan Filter Units (FFUs), especially when paired with
robust electronic control systems, help to ensure the integrity of
production processes within these applications and serve to
maximize overall system economy.

Selecting the right FFU depends upon a number of factors,

including the degree of airflow control required, the desired level
Top Side Roomside Change Frame Roomside Change Grid
of energy efficiency, filter testing requirements for the space, and
accessibility to the filter itself for testing and replacement.
PC Smart Control System

Control System Platform– AstroDrive™

The AstroFan FFU offers the full range of installation methods If the FFU is provided in the room side change option
AstroDrive PC, for individual FFU Control software from top or roomside. A complete range of adapter frames (RSC), then the housing seals and rests on an adapter
controlled via PC suitable for Modbus or EBM Bus fans ensures system integrity. frame holding the flush mounted filter for room side
including complete architecture to control and retrieve fan change provision. The adapter frame rests on the dry
information and status. gasket, applied into the ceiling grid. Adapter frame and
filter have an anodized aluminum cell side extrusion.
AstroDrive PLC, control via PLC suitable for Modbus or
EBM Bus that can include for room pressures, temperatures,
interlock, sensor control. UC Individual Unit Control

AstroDrive CCU, control via PLC suitable for EBM Bus that
can include for sensor control that can control AstroFan units
per group or room.

AstroDrive UC, individual unit control built on the unit or

used handheld.

Fan motor options

AstroFan FFU contains a high performance encapsulated,

direct driven, backward curved fan/motor combination.
Motor options are available either as EBM BUS or EBM Mod
BUS.

The specialized electronic commutation motor design

permits speed control through the built-in electronics, e.g.
via AstroDrive Control System Platforms.

4 5
 Maximized Filtration Efficiency
ASTROFAN FILTER OPTIONS

Main Filter
The AstroFan FFU is equipped with an AstroCel II HEPA filter in
Class H14 as standard. All filters are factory scanned to the
European Standard EN1822:2009 to ensure leak free operation.

Additionally the FFUs are suitable for our high performing MEGAcel
ePTFE and MEGAcel eFRM filters for maximum filter strength,
superior resistance against desinfectants and lowest pressure drop.

Megacel® II ePTFE

• ePTFE media combines ultra-high

efficiency with the lowest possible
pressure drop
• High tensile strenght and chemically inert
ePTFE reduces risk of media damage
and degradation
• No boron outgassing
• Compatible with Discrete Particle
Counter (DPC) test methods

AstroCel® II Optional Pre-filter and AMC Filters

Megacel® II eFRM
• Dual-layer eFRM media combines • Utilizes high performance microglass Depending on the application sufficient
ultra-high efficiency and particulate media to provide high efficiency particu- pre-filtration or molecular filtration may be
loading with low pressure drop late removal needed.
• High tensile strenght and chemically inert • Optimally spaced mini-pleat media pack
eFRM reduces risk of media damage further minimizes pressure drop in this As an option the AstroFan FFU can be
and degradation cleanroom panel configuration equipped with an adaptor frame to hold
• No boron outgassing • Wide range of efficiencies and pack Panel or V-bank prefilters as well as single
• Compatible with Discrete Particle depth options available and multiple layer AMC filters.
Counter (DPC) and photometric test • Compatible with Discrete Particle
methods, including high contration Counter (DPC) and photometric test
oil-based aerosol testing methods
Installed Filters

AstroFan FFU with pre-filter adaptor frame

Sinlge layer standard inlet AMC filters

ePTFE Membrane Media for Microelectronics eFRM Membrane Media for Life Sciences Multiple layer standard inlet AM filters Adaptor plenum for larger AMC filters Multiple layer AMC filtersWW

6 7
AAF International Plant Locations

-
AAF, the world’s largest manufacturer of air Americas Europe Asia & Middle East
filtration solutions, operates production,
Louisville, KY Cramlington, UK Riyadh, Saudi Arabia
warehousing and distribution facilities in 22
countries across four continents. With its Atlanta, GA Gasny, France Shah Alam, Malaysia
global headquarters in Louisville, Kentucky, Ardmore, OK Vitoria, Spain Suzhou, China
AAF is committed to protecting people,
Bartow, FL Ecoparc, France Shenzhen, China
processes and systems through the
development and manufacturing of the Columbia, MO Trencin, Slovakia Miaoli, Taiwan
highest quality air filters, filtration equipment, Fayetteville, AR Olaine, Latvia Bangalore, India
and associated housing and hardware
Hudson, NY Horndal, Sweden Noida, India
available today.
Momence, IL Vantas, Finland Yuki, Japan (Nippon Muki)
Ontario, CA
Contact your local AAF representative Smithfield, NC
for a complete list of AAF Air Filtration
Product Solutions. Tijuana, Mexico
Votorantim, Brazil
Washington, NC

AAF International has a policy of continuous pro-

duct research and improvement and reserves the
right to change design and specifications without
notice.
AAF International
European Headquarters
Odenwaldstrasse 4, 64646 Heppenheim, Germany ©2020 AAF International and
Tel: +49 (0)6252 699 77 0 its affiliated companies.
aafintl.com PB_303_EN_092020