Scribd
Upload
23 views4 pages

Control Systems Lab: Submitted by

The document is a lab report submitted by three students for their Control Systems Lab. It summarizes an experiment to determine the gain at certain operating points and settling time of a system. The objectives were to perform a trade-off study for lead compensation and design a PI controller. Procedures involved setting up a unity feedback system in MATLAB and observing the response. Poles and zeros were added externally to change the transient response to desired specifications of 20% overshoot and 2 second settling time. The learning outcomes were familiarization with the SISO Design Tool and seeing how lead compensation affects transient response.

Uploaded by

Fahad Siddiq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
23 views4 pages

Control Systems Lab: Submitted by

The document is a lab report submitted by three students for their Control Systems Lab. It summarizes an experiment to determine the gain at certain operating points and settling time of a system. The objectives were to perform a trade-off study for lead compensation and design a PI controller. Procedures involved setting up a unity feedback system in MATLAB and observing the response. Poles and zeros were added externally to change the transient response to desired specifications of 20% overshoot and 2 second settling time. The learning outcomes were familiarization with the SISO Design Tool and seeing how lead compensation affects transient response.

Uploaded by

Fahad Siddiq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Control Systems Lab

P2

Submitted By:
Syed Muhammed Baqir Naqvi (170984)
Muhammed Inam Anwar (170966)
Qazi Ahasan Nawaz (171008)
Class/Sec: BEEP 5A
Submitted To: Engr. Hussain Asif
Instructor’s Remarks:

Submission Time: In Late in Working Days


Time 0 1 2 3 4 5

Marks: Total Marks Obtained Marks

Additional Remarks: _______________________________________


________________________________________________________

Instructor’s Signature: _____________


Lab No 11
To Determine gain at certain OS and Settling
time.
1. Objectives:
 To perform a trade-off study for lead compensation. To design a PI controller and see its effect
upon steady-state error.

2. Procedures:
2.1. Lab Task 1:
 Using MATLAB’s SISO Design Tool, set up a negative unity feedback system with.

 After plotting it on Simulink we get.

 Where as its response is.

 Adding overshoot of 20% we get.


 Now we observe by adding settling time of 2sec.

 Since closed loop root locus, overshoot and settling tine don’t seems to meet at same point we will
add Zero and Pole externally such that it changes its transient response to desired location.

 We added a zero at -3 and a pole at almost -19.8, we are receiving a transient response.
Learning Outcomes:
 We were able familiarize ourselves with MATLAB’s SISO Design Tool.
 We saw lead compensator effects the transient response of our system.

You might also like