This document contains calculations to determine the materials needed for masonry work, including concrete hollow blocks, mortar, plaster, and riprap. It lists the wall dimensions and calculates the total wall area. It then determines the number of concrete blocks, amount of cement and sand for mortar using 4" and 6" blocks. It also includes calculations for the cement and sand needed for plaster on one or both wall faces. Finally, it lists dimensions and calculations to determine the volume of boulders, cement bags, and sand volume for riprap along the wall.
This document contains calculations to determine the materials needed for masonry work, including concrete hollow blocks, mortar, plaster, and riprap. It lists the wall dimensions and calculates the total wall area. It then determines the number of concrete blocks, amount of cement and sand for mortar using 4" and 6" blocks. It also includes calculations for the cement and sand needed for plaster on one or both wall faces. Finally, it lists dimensions and calculations to determine the volume of boulders, cement bags, and sand volume for riprap along the wall.
This document contains calculations to determine the materials needed for masonry work, including concrete hollow blocks, mortar, plaster, and riprap. It lists the wall dimensions and calculates the total wall area. It then determines the number of concrete blocks, amount of cement and sand for mortar using 4" and 6" blocks. It also includes calculations for the cement and sand needed for plaster on one or both wall faces. Finally, it lists dimensions and calculations to determine the volume of boulders, cement bags, and sand volume for riprap along the wall.
This document contains calculations to determine the materials needed for masonry work, including concrete hollow blocks, mortar, plaster, and riprap. It lists the wall dimensions and calculates the total wall area. It then determines the number of concrete blocks, amount of cement and sand for mortar using 4" and 6" blocks. It also includes calculations for the cement and sand needed for plaster on one or both wall faces. Finally, it lists dimensions and calculations to determine the volume of boulders, cement bags, and sand volume for riprap along the wall.
A. DETERMINING THE NUMBER OF CONCRETE HOLLOW BLOCKS USED
B. DETERMINING THE NUMBER OF CEMENT & VOLUME OF SAND FOR MORTAR & PLASTERING Enter Wall Height H (M) 2.60 M Enter Wall Length L (M) 460.00 M Enter Area of Window AW (SQ.M.) - SQ.M Enter Area of Door AD (SQ.M) - SQ.M. Breakage Allowance % 5.00 %
TOTAL WALL AREA: 1,196.00 SQ.M.
TOTAL NUMBER OF CHB: 15,698.00 PCS
MORTAR USING 4" CHB
# OF CEMENT BAGS 628.00 BAGS VOL. OF SCREENED SAND CU.M. 52.40 CU.M. MORTAR USING 6" CHB # OF CEMENT BAGS 1,212.00 BAGS VOL. OF SCREENED SAND CU.M. 101.00 CU.M.
PLASTER : 16mm thk Mix: 1:2
One face ofthe wall only # OF CEMENT BAGS 345.00 BAGS VOL. OF FINE SAND CU.M. 19.20 CU.M. PLASTER : 16mm thk Mix: 1:2 Two faces of the wall # OF CEMENT BAGS 689.00 BAGS VOL. OF FINE SAND CU.M. 38.30 CU.M.
RIPRAPING WORKS L W1 Enter Height H (M) 1.00 M Enter Width 1 W1 (M) 0.40 M Enter Width 2 W2 (M) 0.40 M Enter Length L (M) 460.00 M
Using: Stones ranging from 15 to 25 kgs with atleast
H 50% of stones weighing more than 20 kgs, & Class A Mixture
TOTAL SIDE AREA: 0.40 SQ.M.
TOTAL VOLUME: 184.00 CU.M. VOL. OF BOULDERS CU.M. 184.00 CU.M. # OF CEMENT BAGS 474.00 BAGS VOL. OF SAND CU.M. 26.40 CU.M. W2
BASED ON MAX FAJARDO - SIMPLIFIED CONSTRUCTION ESTIMATE HANDBOOK
