This summary provides an overview of a 5/2-way double solenoid valve:
1. The double solenoid valve is mounted on a function plate with a P port and silencer and secured using a snap-lock system with a blue lever.
2. The valve switches positions when voltage is applied to a solenoid coil and remains in that position after the signal is removed until an opposing signal is applied, as indicated by LEDs in the terminal housings.
3. The solenoid coil uses low power and generates little heat, while the electrical connections include reverse polarity protection for the LEDs and protective circuits.
This summary provides an overview of a 5/2-way double solenoid valve:
1. The double solenoid valve is mounted on a function plate with a P port and silencer and secured using a snap-lock system with a blue lever.
2. The valve switches positions when voltage is applied to a solenoid coil and remains in that position after the signal is removed until an opposing signal is applied, as indicated by LEDs in the terminal housings.
3. The solenoid coil uses low power and generates little heat, while the electrical connections include reverse polarity protection for the LEDs and protective circuits.
This summary provides an overview of a 5/2-way double solenoid valve:
1. The double solenoid valve is mounted on a function plate with a P port and silencer and secured using a snap-lock system with a blue lever.
2. The valve switches positions when voltage is applied to a solenoid coil and remains in that position after the signal is removed until an opposing signal is applied, as indicated by LEDs in the terminal housings.
3. The solenoid coil uses low power and generates little heat, while the electrical connections include reverse polarity protection for the LEDs and protective circuits.
This summary provides an overview of a 5/2-way double solenoid valve:
1. The double solenoid valve is mounted on a function plate with a P port and silencer and secured using a snap-lock system with a blue lever.
2. The valve switches positions when voltage is applied to a solenoid coil and remains in that position after the signal is removed until an opposing signal is applied, as indicated by LEDs in the terminal housings.
3. The solenoid coil uses low power and generates little heat, while the electrical connections include reverse polarity protection for the LEDs and protective circuits.
Design This 5/2-way double solenoid valve with push-in fitting is bolted onto a function plate which is equipped with a P port and silencer. The unit is mounted on the profile plate using a snap-lock system with a blue lever (mounting variant "A").
Function The double solenoid valve is reversed when voltage is applied to a solenoid coil and remains in this switching position after the signal is removed until an opposed signal is applied. The presence of switching signals is shown by the LEDs in the terminal housings.
Note The solenoid coil is characterised by very low power consumption and low heat generation. The electrical connections incorporate protection against incorrect polarity for the LEDs and protective circuits.
Pneumatic section Medium Filtered compressed air (lubricated or unlubricated) Design Spool valve, pilot-actuated, with return spring Pressure range 150 to 800 kPa (1.5 to 8 bar) Switching time at 600 kPa (6 bar) 10 ms Standard nominal flow 500 l/min rate Connection CU-PK-3 for plastic tubing PUN-4 x 0.75 Electrical section Voltage 24 V DC Power consumption 1.5 W Duty cycle 100% Connection For 4 mm plug and 2-way jack plug Subject to change Technical data
