Learning & Performance Catalog: We Empower People Worldwide

WE EMPOWER PEOPLE WORLDWIDE
LEARNING &
PERFORMANCE
CATALOG
www.milestonesys.com/solutions/services/learning-and-performance
Contents Milestone Cloud Fundamentals 19

Milestone Fundamentals of IP Surveillance Sys-
tems 20
Moving Forward with XProtect VMS 20
The essence of Performance 4
XProtect VMS Deployment Best Practice 4 Communicating Milestone Value 21
Communicating Milestone Product Features 21
Training Tracks 5
Communicating the value of XProtect on AWS 21
Deploying Single-server, Low-com- Exploring Milestone Care™ 22
plexityXProtect Systems 6
Deploying Multi-server, Medium-com-
plexityXProtect Systems 7 Designing Secure Milestone Solu-
Deploying Multi-server, High-com- tions 23
plexityXProtect Systems 8
Designing Small-to-medium XProtect VMS 23
Cybersecurity 9
Designing XProtect on AWS solutions 23
Design Engineer 10
Exploring XProtect VMS System Architecture
Milestone Cloud Solutions 11
and Communication 24
Improving XProtect VMS Performance
eLearning 12 withMulti-streaming 24
Ordering Licenses and

Exploring New XProtect® Managing Accounts 25
Features 13
Exploring the Milestone Reseller Portal 25
Exploring XProtect 2020 R2 Update Features 13
Exploring Value and Features of Milestone
Exploring XProtect 2020 R1 Update Features 13 Store 25
Exploring XProtect 2019 R1 Update Features 14 Configuring And Using XProtect 26
Cameras and Device Groups in XProtect VMS 26
Configuring and Using Alarms and Notifications26
Configuring and Using Edge Storage in XPro-
tect VMS 27
Configuring and Using Enhanced PTZ 27
Configuring and Using Maps 27
Exploring XProtect 2016 R3 17
Configuring and Using Push Notifications 28
Configuring and Using XProtect Smart Map 28
Getting Started with XProtect 18 Configuring and Using Video Push 28
Configuring Milestone Interconnect™ 29
Getting Started with XProtect VMS 18
Configuring Storage and Archiving for XProtect
Getting Started with XProtect® Professional 18
VMS 29
Getting Started with XProtect Smart Client 19
Configuring XProtect DLNA Out 29
Getting Started with XProtect Web Client 19
2
Configuring XProtect Mobile with Smart Con-

nect 30
Developing with the MIP SDK 40
Deploying XProtect on AWS 30
Getting Started with Rules in XProtect VMS 31 Developing MIP SDK Plug-in Integrations 40
Installing and Testing the ONVIF Bridge 31 Developing MIP SDK Component Integrations 40
Installing XProtect VMS in a multi-server envir- Getting Started with the MIP SDK 41
onment 32
MIP Driver Framework 41
Moving Hardware Devices 32
Exploring the Milestone Husky™ 42

Configuring and Using Milestone
and Third-party Add-ons 33 Configuring and Using the Milestone Husky™
M10 43
Configuring and Using XProtect Access 33 Exploring System Design Options with the
Husky™ M500 Advanced 43
Configuring and Using XProtect LPR 33
Exploring System Design Options with the
Configuring and Using the XProtect Smart Wall 33
Husky™ X Series 43
Installing the Arcules-XProtect® Hybrid VMS
Exploring the Milestone Husky M20 Hardware 44
Solution 34
Exploring the Milestone Husky M20 Value and
Integrating BriefCam Syndex in Milestone XPro-
Benefits 44
tect VMS 34
Exploring the Milestone Husky M500 Advanced 44
Integrating Lenel OnGuard Access Control in
Milestone XProtect 35 Installing and Configuring the Milestone Husky
M500 Advanced 45
Integrating Milestone XProtect Video into
Lenel OnGuard 35 Installing and Configuring the Milestone
Husky™ M30 and M50 45
Installing and Configuring the Husky™ X2 46
Maintaining and Troubleshoot-
Installing and Configuring the Husky™ X8 46
ing XProtect 36
Installing the Milestone Husky™ M20 46
Configuring the XProtect System Monitor 36
Troubleshooting and Securing XProtect VMS Instructor-led training 47
with Server Logs 36
Troubleshooting Network Connectivity in XPro- Milestone Solution Design 48
tect VMS Solutions 37
Milestone Technical Configuration Level 1 48
Milestone Technical Configuration Level 2 51
Ensuring Secure Systems 38
Configuring and Using the Bulk Password Man- Certifications 52
ager 38
Milestone Certified Design Engineer (MCDE) 53
Hardening XProtect VMS 38
Milestone Certified Integration Technician
Identifying Cybersecurity Threats 38
(MCIT) 53
Managing Secure Access in XProtect Advanced 39
Milestone Certified Integration Engineer
Milestone Server Communication Encryption 39 (MCIE) 54
Register today 55
3
The essence of
Performance
The mission of the Learning & Performance team is to empower the people in the Milestone community to
successfully perform on the job by delivering effective learning and performance support solutions. Our vis-
ion is to grow the number of people globally who have proven expertise in the design and implementation
of Milestone community solutions.
We offer both instructor-led training classes and free online eLearning courses to help learners build the
knowledge and skills needed to perform on the job. Our online certification assessments allow individuals
to prove their expertise in design, installation, and configuration of Milestone products and to fulfill Chan-
nel Partner Program (CPP) requirements.
It is important that learners receive recognition and documentation of their successes! Completion cer-
tificates are available for learners after attending our instructor-led training classes/workshops or com-
pleting many of our eLearning courses. Certification diplomas are issued to individuals who pass the
certification assessments.
In support of our global community, our Learning Portal, training, and certifications are available in mul-
tiple languages.
XProtect VMS Deployment Best Practice

In addition to the learning tools outlined in this catalog, theMilestone XProtect VMS Deployment Best
Practice is a reference document for technicians and engineers installing Milestone XProtect VMS (single- to
multi-server installations, medium complexity) and should be used as a technical design and installation
guide when planning, installing, servicing, and expanding Milestone solutions.
l Supplements Milestone manuals, guides, and white papers.

l Includes practical advice and suggestions on how to best deploy XProtect VMS.
l Provides context for included resources, as well as additional references to eLearning courses and non-
MIlestone resources.
Available through the Milestone Deployment Assistant.
The Deployment Assistant will help you organize deployment and manage the risk and complexity of
installing an IP video surveillance system. By providing a structured and easy-to-follow approach to deploy-
ment and documentation, the new interactive tool will boost the quality of your deployment.
Training Tracks
A training track is a way of grouping together eLearning courses to create an
ordered curriculum that is applicable to a specific job role.
While all the courses included in these training tracks are also available within
the individual eLearning categories they belong in, training tracks are a sug-
gested learning path to help system designers and field technicians get the
knowledge they need.
Once you enroll in a training track, you will be automatically enrolled in the individual courses. If you have
already completed courses within a track, the courses you have not yet completed will be listed first.
Deploying Single-server, Low-complexity

XProtect Systems
The Integrator Level 1 training track is recommended for field technicians who are responsible for
installing and configuring single-server, low-complexity video surveillance systems. The courses
included in this training track provide knowledge on how to install and configure systems using Mile-
stone products.
Novice:
l Milestone Fundamentals of IP Surveillance Systems

l Getting Started with XProtect® Smart Client
Competent:
l Getting Started with XProtect® VMS

l Adding Cameras and Device Groups in XProtect VMS Products
Proficient:
l Configuring Storage and Archiving for XProtect VMS

l Getting Started with Rules in XProtect VMS
l Troubleshooting Network Connectivity in XProtect VMS Solutions
6h
-6-
Deploying Multi-server, Medium-complexity

XProtect Systems
installing and configuring multi-server, medium-complexity video surveillance systems. The courses
stone products.
Novice:
l Configuring Storage and Archiving for XProtect VMS

l Getting Started with Rules in XProtect VMS
l Moving Hardware Devices
l Managing Secure Access in XProtect Advanced
l Improving XProtect VMS Performance with Multi-streaming
Competent:
l Configuring and Using Edge Storage in XProtect VMS

l Configuring and Using Enhanced PTZ
l Configuring and Using Maps
l Configuring and Using XProtect SmartMap
l Configuring XProtect Mobile with Smart Connect
l Configuring and Using Push Notifications
Proficient:
l Exploring XProtect VMS System Architecture and Communication

l Configuring and Using Alarms and Notifications
l Configuring Milestone Interconnect
l Configuring XProtect System Monitor
l Troubleshooting and Securing XProtect VMS with Server Logs
l Hardening XProtect VMS
l Milestone Server Communication Encryption
6h
-7-
Deploying Multi-server, High-complexity

XProtect Systems
installing and configuring multi-server, high-complexity video surveillance systems. The courses
stone products.
Novice:
Competent:
l Configuring XProtect DLNA Out

l Configuring and Using the XProtect Smart Wall
Proficient:
l Identifying Cybersecurity threats
9h
-8-
Cybersecurity
The courses included in this training track provide knowledge on cybersecurity issues.
The track includes:
l Identifying Cybersecurity Threats

l Hardening XProtect VMS
l Managing Secure Access in XProtect Advanced
l Milestone Server Communication Encryption
2h
-9-
Design Engineer
The Design Engineer training track is recommended for partners in a design role who are responsible for
designing surveillance solutions to meet customers’ needs. The courses included in this training track
provide knowledge on how to design solutions using Milestone products.
This track includes:
l Milestone Fundamentals of IP Surveillance Systems

l Communicating Milestone Product Features
l Designing Small-to-medium XProtect VMS
l Identifying Cybersecurity Threats
l Exploring System Design Options with the Husky™ M500 Advanced
l Improving XProtect VMS performance with Multi-streaming
4h
- 10 -
Milestone Cloud Solutions

The Milestone Cloud Solutions training track is recommended for sales, designers, and field technicians
who are responsible for communicating about, designing for, and otherwise deploying XProtect solutions
in the cloud.
Once you enroll in this training track, you will be automatically enrolled in the individual courses. If you
have already completed courses within a track, the courses you have not yet completed will be listed first.
Content Areas Covered
l Milestone Cloud Fundamentals

l Installing the Arcules-XProtect Hybrid VMS Solution
l Communicating the value of XProtect on AWS
l Designing XProtect on AWS solutions
l Deploying XProtect on AWS
3h
- 11 -
eLearning
Our eLearning is a convenient way of getting immediate access to free training
online! We offer an ever-increasing number of eLearning courses for integrators
and reseller partners, as well as end-user customers. These courses are free and
available 24/7 from your computer or tablet.
Exploring New XProtect® Features

The courses included in the Exploring New XProtect Features eLearning cat-
egory are a convenient way to introduce learners to the newest XProtect fea-
tures from the most recent release. Once a new version of the software is
released, these modules will be updated to cover the newest features.
Exploring XProtect 2020 R2 Update Features

In Exploring the XProtect 2020 R2 Update Features, learners meet with a virtual team member to discover
the new products and features, along with the challenges they solve. After completion, individuals in cus-
tomer-facing roles, as well as anyone interested in the new release, will be able to describe the benefits of
the XProtect 2020 R2 release, including:
l Smarter search with ONVIF-compatible metadata
l Enhanced cybersecurity
l Customer dashboard improvements
l Video delivery excellence
l Online documentation portal
l Other improvements
BEGINNER 10m
Take Course

l Video processing service
l Desktop notifications for alarms
l LPR included in Centralized Search
l Additional functionality for ONVIF devices
- 13 -
l Online documentation portal
l Notification manager in Customer Dashboard
BEGINNER 10m
Take Course

l Adaptive streaming
l Bulk password management
l Centralized search
l Driver framework SDK
l Milestone Deployment Assistant
l Other system improvements
BEGINNER 15m
Take Course

l Two-way audio in the Web Client

l One-way and two-way audio in the Mobile Client
l Recording server encryption requiring certificate
l License Plate Recognition open to third-party integrations
l 64-bit Smart Client Player
l Improved hardware
BEGINNER 15m
Take Course
- 14 -

the new product features, along with the challenges they solve. After completion, individuals in customer-
facing roles, as well as anyone interested in the new release, will be able to describe the benefits of the
XProtect 2018 R3 release, including:
l New Log Server

l Scalable Video Quality Recording (SVQR) improvements
l Dynamic device event handling
l Smart Map in the MIP SDK
l One-way audio in the Milestone Web Client
BEGINNER 15m
Take Course

l Building support in Smart Map

l NVIDIA Hardware Acceleration on the Recording Server and Mobile Server
BEGINNER 20m
Take Course

l Privacy Mask Enhancements

l Hardware Acceleration Enhancements
l Enhanced DLNA Support
l Separate Device Packs
l One-click Installer
- 15 -
BEGINNER 20m
Take Course

l Mobile Access Control

l DNLA Support
l High-quality audio AAC
BEGINNER 15m
Take Course

l Two new products for the mid-market

l Enhancements to the high-end market
BEGINNER 20m
Take Course

In Exploring the XProtect 2017 R1 Update Features, learners meet with virtual stakeholders and team
members to discover the new features, the challenges they solve, and some brief information about how
to configure the new features. After completion, customer-facing roles, as well as anyone interested in
the new release, will be able to describe the new benefits of the XProtect 2017 R1 release, including:
l Lower total cost of ownership (TOC)

l Improved security
- 16 -
l Ease of use
l Other VMS updates
BEGINNER 20m
Take Course
Exploring XProtect 2016 R3

In Exploring XProtect 2016 R3, learners meet with a virtual team member to discover the details, use
cases, and considerations surrounding each new feature of the MIlestone XProtect 2016 R3 video man-
agement system (VMS) product line.
After completion integrators, system administrators, security managers and operators, and sales and
design teams will be able to:
l List and describe the new XProtect 2016 R3 features that support scalable high performance and
low total cost of ownership (TCO).
l List and describe the new XProtect 2016 R3 features that support efficient end-user operation.
l List and describe the new XProtect 2016 R3 features that support increased protection from cyber-
security threats.
BEGINNER 30m
Take Course
- 17 -
Getting Started with XProtect

The courses included in the Getting Started with XProtect eLearning category
are a convenient way to introduce learners to Milestone products and
product features. They are designed to cover basic installation practices and
functionality.
Getting Started with XProtect VMS

Milestone XProtect VMS products include XProtect Express+, XProtect Professional+, XProtect® Expert, and
XProtect® Corporate. This course covers the tasks required to install and configure a single-site, low-com-
plexity XProtect Professional+ VMS solution. These tasks also apply to any of the other products listed
above. After completion, partners and integrators new to working with these products will be able to:
l Identify Milestone Support resources.

l Prepare a system for XProtect.
l Find and download XProtect.
l Install and configure basic XProtect features.
l Explore the XProtect® Management Client and set options.
BEGINNER 40m
eLearning Video
Getting Started with XProtect® Professional

XProtect Professional is IP video management software (VMS) designed for mid-sized security installations
of more than 45 cameras and is typically used in institutions such as schools, museums, and hospitals. This
course covers the basic installation, configuration, and usage of XProtect Professional VMS. After com-
pletion, partners and integrators will be able to:
l Download and install the XProtect Professional VMS.

l Automatically and manually connect devices.
l Configure storage and archive settings.
l Adjust motion detection.
l Add and manage users.
l Manage licenses.
BEGINNER 30m
Take Course
- 18 -
Getting Started with XProtect Smart Client

The XProtect Smart Client is a powerful application used to view and manage the daily operations of a sur-
veillance installation. This course covers the basic installation and operation of the Milestone XProtect®
Smart Client. After completion, end-user operators, and administrators will be able to:
l Install and navigate through the XProtect Smart Client.

l Create views in the XProtect Smart Client.
l Monitor events by viewing and adjusting live video.
l Investigate incidents by searching through and playing back recorded video.
l Export evidence via video and still images.
BEGINNER 90m
eLearning Video
Getting Started with XProtect Web Client

The XProtect Web Client is an intuitive, web-based interface used to view, play back, and share video. This
course covers the operation of the XProtect Web Client. After completion, end-user operators will be able
to:
l View live video.

l Manage cameras for an investigation.
l Play back recorded video and export it for investigation.
BEGINNER 20m
eLearning Video
Milestone Cloud Fundamentals

This course is intended for system integration technicians, salespeople, designers, and decision-makers. In
this course, you explore the basic concepts of cloud computing and how they apply to both IP video sur-
veillance in general and Milestone XProtect VMS in particular. After taking this course, partners will be
able to:
l Define what "the cloud" is, including common cloud-based providers, business models, and services.
l Describe how the workload considerations for IP-based video surveillance influence cloud-based
deployments.
l Identify likely use cases for migrating or deploying XProtect VMS in the cloud.
l Assess the similarities, differences, and trade-offs between on-premises XProtect VMS solutions and
cloud-based XProtect VMS solutions.
l Consider next steps for exploring a transition to cloud-based VMS deployments.
- 19 -
INTERMEDIATE 20m
Take Course
Milestone Fundamentals of IP Surveillance Systems

Milestone Fundamentals of IP Surveillance Systems helps build foundational knowledge and skills with
digital video management software (VMS). This course covers how to:
l Describe the types of devices in IP surveillance installations and list the components of a VMS.
l Select appropriate cameras and lenses by considering the surveillance objective, field of view, res-
olution standards, exposure, codecs, and other key factors.
l Describe the main network components and protocols that support IP surveillance systems.
l Perform network bandwidth calculations and identify limitations or critical points in a network
design that may lead to choke points.
l Describe the main types of storage and the recommendations for storing video in a VMS.
BEGINNER 60m
eLearning Video
Moving Forward with XProtect VMS

The Moving Forward with the XProtect VMS course helps build confidence and skills in transitioning from
Milestone’s XProtect® Express and XProtect Professional to XProtect Express+, XProtect Professional+,
XProtect Expert, and XProtect Corporate.
After completion, partners and integrators should have a better understanding of:
l The differences between the wizards.

l The principles of the rules system.
l Where to complete similar tasks in the new interface.
BEGINNER 20m
Take Course
- 20 -
Communicating Milestone Value

The Communicating Milestone Value series of courses will help customer-
facing partners communicate the value of Milestone and our products, and
be able to better convey the advantages of working with Milestone.
Communicating Milestone Product Features

In Communicating Milestone Product Features, learners work with a flash card interaction to learn how to
communicate the value of Milestone product features. After completion, partners in a sales role who are
newer to Milestone will be able to:
l Identify a given Milestone feature and explain what the feature does.
l Describe why your customers care about that feature and what challenges it could potentially
solve.
l Identify the product suite that supports that feature.
l List typical customer profiles and their system profiles that would benefit from that feature and
describe their characteristics.
BEGINNER 30m
Take Course
Communicating the value of XProtect on AWS

This course is intended for system integrator partners in a sales role. In this course, you discover the Mile-
stone XProtect VMS products offered on AWS Marketplace and examine how they can provide value to
both your customers and your own business. After taking this course, system integrator salespeople will
be able to:
l List and describe the XProtect on AWS Marketplace products Milestone offers.
l Articulate the benefits of XProtect on AWS Marketplace products for customers.
l Understand the benefits of XProtect on AWS Marketplace products for system integrator partners.
l Consider the projects and use cases that benefit the most from XProtect on AWS deployments.
l Unveil potential opportunities for AWS in your discussions with customers
INTERMEDIATE 15m
Take Course
- 21 -
Exploring Milestone Care™

In the Exploring Milestone Care course, learners discover the levels of Milestone Care. After completion,
partners will be able to:
l Identify a given Milestone Care level and explain the benefits.

l Find the best Care support program for their business needs.
BEGINNER 15m
Take Course
- 22 -
Designing Secure Milestone Solutions

The Designing Secure Milestone Solutions series of courses covers basic skills
and information needed to successfully design a surveillance system using Mile-
stone products to meet customers' needs.
Designing Small-to-medium XProtect VMS

When you have completed this course, you will be familiar with key elements in the Milestone design pro-
cess and you will be prepared to:
l Determine surveillance objectives.

l Define and calculate image quality for cameras.
l Discuss basic network topologies.
l Advise your customers about product selection.
l Use the XProtect Server Calculator to calculate needs for servers, network, and storage.
INTERMEDIATE 30m
eLearning Video
Designing XProtect on AWS solutions

This course is intended for solution design partners. In this course, you investigate the components and
architecture that comprise XProtect on AWS products, and explore what to consider when dimensioning,
networking, and expanding XProtect on AWS solutions. After taking this course, solution design partners
will be able to:
l Determine the appropriate XProtect on AWS product to suit a customer’s needs.

l Diagram the XProtect on AWS solution topology architecture, including on-premises components.
l Dimension EC2 instances for XProtect on AWS solutions.
l Consider the cost, networking, data management, and security characteristics relevant to XProtect
VMS when working in AWS.
l Describe possible methods of expanding XProtect on AWS.
l Connect on-premises clients to XProtect on AWS.
l Communicate sample design scenarios for XProtect on AWS solutions.
ADVANCED 60m
Take Course
- 23 -
Exploring XProtect VMS System Architecture and Communication

In Exploring XProtect VMS System Architecture and Communication, you explore the system architecture
of an XProtect Video Management Software (VMS) installation, discover the purpose of each system com-
ponent, and understand how communication flows through the software when you perform certain
tasks.
After completion, system designers, integrators, and support roles will be able to:
l List the components of XProtect VMS.

l Explain the function of each of the components.
l Describe the communication protocol and ports for various functions within the system.
*This course features video animation with audio narration. To complete the course, you must pass a brief
5-question quiz.
INTERMEDIATE 30m
eLearning Video
Improving XProtect VMS Performance with

Multi-streaming
XProtect VMS supports multi-streaming for IP cameras. This allows you to configure streams of different
qualities for different purposes, which helps reduce network traffic and reduces CPU load for decoding.
This course covers concepts and tasks to help you benefit from this feature. After completion, integrators,
designers, and system administrators will be able to:
l Explain multi-streaming in IP cameras.

l List the benefits of multi-streaming.
l Design a multi-streaming solution.
l Configure multi-streaming in XProtect Management Client.
INTERMEDIATE 30m
Take Course
- 24 -
Ordering Licenses and Managing Accounts

The Ordering LIcenses and Managing Accounts series of courses will help
learners use the tools available in their Milestone Reseller Portal to promote
successful day-to-day business.
Exploring the Milestone Reseller Portal

In the Exploring the Milestone Reseller Portal, course learners discover the benefits of Reseller Portal. After
completion, partners will be able to:
l Log in to My Milestone.
l Find the Server calculator and Husky calculator.
l Register a project to get the best discounts.
l Register a license to a customer.
l Activate a license for a customer.
l Monitor customers' VMS system health.
BEGINNER 15m
Take Course
Exploring Value and Features of Milestone Store

The Milestone Store provides a simplified, intuitive way to perform common ordering tasks. This eLearn-
ing course covers the basics of how to manage orders, licenses, subscriptions, and quotes. After com-
pletion, customer-facing distributor roles will be able to:
l Place new orders.

l Trade in SLCs.
l Add configurations to existing SLCs.
l Renew Care Plus subscriptions.
l Manage quotes.
BEGINNER 60m
Take Course
- 25 -
Configuring And Using XProtect

The Configuring and Using XProtect series of courses highlights the con-
figuration and use of different XProtect Video Management Software (VMS)
features.
Cameras and Device Groups in XProtect VMS

Adding cameras and devices to the XProtect VMS is a fundamental task in the Management Client. This
eLearning course covers the basics of how to prepare and connect your cameras to the system, and how
you can organize and structure your cameras and devices with device groups. After completion, partners
and integrators will be able to:
l List basic prerequisites prior to adding cameras.

l Add cameras and devices with the Add hardware wizard.
l Configure cameras.
l Create and manage device groups.
l Perform multiple camera configuration from device groups.
BEGINNER 30m
eLearning Video
Configuring and Using Alarms and Notifications

Alarms and notifications help customers respond quickly to situations that need attention. This course cov-
ers how to configure and use alarms and notifications. After completion, end-user administrators and
operators will be able to:
l Create an alarm.
l Send an email upon the occurrence of an event or alarm.
l Associate a map with an alarm.
l Create a time profile to determine when alarms are active.
l Assign an alarm to another team member.
l Open and close (resolve) an alarm.
INTERMEDIATE 30m
eLearning Video
- 26 -
Configuring and Using Edge Storage in XProtect VMS

Edge Storage refers to the ability of modern IP cameras to record video and audio to embedded or remov-
able onboard media storage devices instead of, or in addition to, streaming media to a centralized record-
ing server. Milestone XProtect VMS supports the retrieval of edge storage recordings and features several
ways to maximize system reliability, flexibility, and performance when using edge storage to complement
centralized recording. After completion, partners and integrators will be able to:
l Configure edge storage options in camera interface.

l Configure edge storage retrieval options in the XProtect Management Client.
l Manually request edge storage recordings in the XProtect Smart Client.
INTERMEDIATE 45m
Take Course
Configuring and Using Enhanced PTZ

This course module describes how to set up, select, and use presets and patrolling profiles for a PTZ cam-
era in the XProtect Smart Client 2016. It also describes how to take and release control of a PTZ camera in
a reserved session and adjust the timeout for manual and reserved PTZ sessions. After completion, part-
ners and integrators will be able to:
l Set up presets and patrolling profiles for a Pan-Tilt-Zoom (PTZ) camera in the Smart Client.
l Select and Use PTZ presets and patrolling profiles.
l Take and release control of a PTZ camera in a reserved session.
l Adjust the timeout for manual and reserved PTZ sessions.
BEGINNER 20m
eLearning Video
Configuring and Using Maps

XProtect® Smart Client Maps help you find cameras by location, alert you to locations of problems or
alarms, and provide an overall view of a site. This course covers how to configure and use Smart Client
Maps. After completion, partners and integrators will be able to:
l Add, remove, and edit maps.

l Add, edit, and remove elements on a map.
l Add a hot zone, recolor the zone, and select a sub-map.
l Change a map background.
BEGINNER 20m
- 27 -
Take Course
Configuring and Using Push Notifications

Push notifications provide the occasional user, as well as patrolling officers, notifications about incidents
that require their attention. This course covers how to enable push notifications on the Mobile Server.
After completion, partners and integrators will be able to:
l Configure notifications on the Mobile Server in the Management Client and Management Applic-
ation.
INTERMEDIATE 20m
Take Course
Configuring and Using XProtect Smart Map

XProtect Smart Map is a new XProtect Smart Client feature that allows operators to view camera and
other device locations on different types of geographic information system (GIS) world maps. This course
covers the configuration and use of the XProtect Smart Map feature. After completion, end-user oper-
ators and integrators will be able to:
l Describe the benefits of the XProtect Smart Map feature.

l Add a Smart Map to a view.
l Add and remove cameras, as well as define the field of view.
l Preview and send multiple cameras to windows.
l Change the geographic background.
l Manage default settings.
INTERMEDIATE 30m
eLearning Video
Configuring and Using Video Push

XProtect Mobile Video Push can provide realtime situational awareness for security personnel as guards
are on patrol. After completion, partners and integrators will be able to:
l Ensure the role using video push is authorized to login to the mobile server, and can read the video
push camera and mic.
l Add a video push channel on the Mobile Server.
l Add a video push device on the Recording Server.
- 28 -
l Add a video push view item in the XProtect Smart Client.

l Download, set up, and use XProtect Mobile app from a mobile device.
INTERMEDIATE 20m
Take Course
Configuring Milestone Interconnect™

Milestone Interconnect can connect multiple XProtect installations across the globe. This course covers
how to configure Milestone Interconnect in XProtect Corporate. After completion, partners and integ-
rators will be able to:
l Explain the benefits and differences between Milestone Interconnect and Milestone Federated
Architecture™.
l Connect to a remote VMS installation from XProtect Corporate.
l Set the central site to store the remote site video recordings.
l Schedule a time to download video from the remote site.
INTERMEDIATE 20m
Take Course
Configuring Storage and Archiving for XProtect VMS

Milestone XProtect VMS offers flexible storage options enable you to choose the most cost-effective,
secure, and reliable storage and archive solutions for your customers' business. This course covers the archi-
tecture and configuration of storage in XProtect. After completion, designers and technicians will be able
to:
l Explain recording architecture in XProtect VMS.

l Recommend storage and recording technologies for IP video surveillance.
l Design and optimize storage solutions.
l Prepare server operating systems for recording.
BEGINNER 20m
Take Course
Configuring XProtect DLNA Out

The Digital Living Network Aliance (DLNA) is a standard for easily connecting multimedia devices together
to share/stream audio, video, and pictures. The Milestone DLNA server can stream surveillance video to
- 29 -
smart TVs. After completion, integrators and operators will be able to:
l Download and install the DLNA server.

l Add single camera, and rules-based DLNA channels in the XProtect Management Client
l Access the DLNA channel from the Smart TV.
ADVANCED 15m
Take Course
Configuring XProtect Mobile with Smart Connect

The Milestone Mobile Server can automatically identify network addresses and configuration of con-
sumer grade routers. This course covers how to connect to the Mobile Server from any location and
demonstrates how to send an email directly from within the administration interface to the end-user.
l Explain that Milestone Mobile can automatically identify network addresses and configuration of
consumer-grade routers.
l Explain that Milestone Mobile can switch seamlessly between internal and external IP addresses
and connect to the Mobile Server from any location.
l Send an email directly from within the administration interface to the end user.
l Configure these settings with either the XProtect® Management Application 2016 or XProtect
Management Client 2016.
BEGINNER 20m
Take Course
Deploying XProtect on AWS

This course is intended for system integration technicians and engineers. In this course, you work with a
virtual team to deploy the bring-your-own-license (BYOL) version of XProtect on AWS Marketplace in an
Amazon Virtual Private Cloud (VPC). After taking this course, technicians and engineers will be able to:
l Generate key pairs required for deploying XProtect on AWS.

l Select the appropriate XProtect on AWS Marketplace product.
l Configure CloudFormation stack parameters to initialize XProtect on AWS.
l Connect to XProtect on AWS instances and activate XProtect VMS licenses.
l Connect on-premises cameras to XProtect on AWS.
l Connect on-premises clients to XProtect on AWS.
l Adjust Elastic Cloud Compute (EC2) instance parameters to re-dimension resources for XProtect on
AWS.
- 30 -
ADVANCED 60m
Take Course
Getting Started with Rules in XProtect VMS

The rules engine in XProtect VMS allows you to automate and tailor the surveillance system to match spe-
cific needs and conditions. By implementing rules, you can increase operational efficiency and automate
standard security tasks at the same time. Furthermore, you can reduce the number of manual activities
around the system. This course covers concepts and tasks to help you benefit from the rules engine in
XProtect Express+, XProtect Professional+, XProtect Expert, and XProtect Corporate. After completion,
partners and integrators will be able to:
l List principles for rules and events.

l Manage rules in the XProtect Management Client.
l Configure rules with the Manage Rules wizard.
l Create time profiles.
l Enable hardware events.
l List examples for events on critical system conditions.
INTERMEDIATE 50m
eLearning Video
Installing and Testing the ONVIF Bridge

The Milestone ONVIF Bridge is an interface between an XProtect system and an external surveillance sys-
tem. This course covers installation, configuration, and testing of the ONVIF Bridge. After completion,
partners and integrators will be able to:
l Explain ONVIF Bridge concepts.

l Create an ONVIF User Role.
l Install the ONVIF Bridge server and Management plug-in.
l Add an ONVIF Bridge.
l Test ONVIF video.
ADVANCED 30m
eLearning Video
- 31 -
Installing XProtect VMS in a multi-server environment

In the Installing XProtect VMS in a multi-server environment course, you act as a consultant to help install
and configure a distributed, large XProtect VMS solution. After completion, partners and integrators
familiar with XProtect VMS will be able to:
l Identify Milestone support resources.

l Prepare a system for XProtect.
l Find and download XProtect.
l Install XProtect VMS on dedicated servers.
INTERMEDIATE 20m
Take Course
Moving Hardware Devices

The Move Hardwar e feature allows customers to load balance, replace hardware, and replace a defective
recording server without interruption of the playback or exporting of video. This eLearning course covers
the benefits of moving hardware and how to move hardware between different Recording Servers. After
completion, partners and integrators will be able to:
l Describe the benefits of moving hardware.

l Use the XProtect Management Client to move hardware from one Recording Server to another.
l List resources to troubleshoot issues.
BEGINNER 20m
Take Course
- 32 -
Configuring and Using Milestone and Third-party

Add-ons
TheConfiguring and Using Milestone and Third-party Add-ons series of
courses highlights the configuration and use of different Milestone add-ons
and third-party integrations.
Configuring and Using XProtect Access

XProtect® Access is an add-on product to Milestone’s XProtect VMS and Husky NVRs that makes it possible
to integrate access control into your software. This course covers how to configure and use the XProtect
Access add-on. After completion, partners and integrators will be able to:
l Enable XProtect Access and integrate access control systems with XProtect video management soft-
ware (VMS).
l Adjust XProtect Access configuration on the access control properties pane.
INTERMEDIATE 20m
eLearning Video
Configuring and Using XProtect LPR

XProtect LPR is license plate recognition software that reads license plate information from vehicles and
links license plate information with video. This course covers the installation, configuration, and use of
XProtect LPR. After completion, integrators and operators will be able to:
l Install and configure License Plate Recognition.

l Select and set up cameras for LPR.
l Add LPR cameras.
l Create a matchlist.
l Create an alarm based on specific license plates.
INTERMEDIATE 15m
eLearning Video
Configuring and Using the XProtect Smart Wall

XProtect® Smart Wall is an add-on product that improves response time by giving a complete overview of
large surveillance centers. This course covers how to configure and use the XProtect Smart Wall add-on.
- 33 -
l Describe how the XProtect Smart Wall enhances the ability of surveillance personnel to recognize,
react to, and investigate incidents as a coordinated team.
l Use the XProtect Management Client to configure Smart Wall systems.
l Adjust Smart Client settings to display particular Smart Wall configurations and relevant presets.
INTERMEDIATE 30m
eLearning Video
Installing the Arcules-XProtect® Hybrid VMS Solution

This eLearning course covers how to download, install, and connect Arcules VSaaS in Milestone XProtect
VMS. After completion, partners and integrators will be able to:
l Describe the key components of an Arcules Video Surveillance as a Service (VSaaS) solution.
l Communicate the benefits of integrating an Arcules solution into XProtect VMS.
l Illustrate how an Arcules solution fits into a multi-server XProtect network topology.
l Identify cases where an Arcules solution is the optimal choice.
l Identify cases where an Arcules solution is not recommended.
l Perform the steps to download and install the Arcules Connector plug-in.
l Perform the steps to add Arcules gateways and cameras to the Management Client.
l Create a view in the Smart Client that contains both Arcules and XProtect cameras.
l Observe alarm synchronization across Arcules and XProtect products.
INTERMEDIATE 20m
Take Course
Integrating BriefCam Syndex in Milestone XProtect VMS

This eLearning course covers how to configure and use BriefCam Syndex in Milestone XProtect® VMS. The
BriefCam Syndex integration condenses many hours of video into a few minutes by isolating and storing
every moving entity. Video is then presented based on filter criteria. After completion, integrators and
operators will be able to:
l Explain the value and benefits of the BriefCam Syndex/Milestone XProtect VMS integration.
l Install BriefCam and supporting plug-ins.
l Obtain and register a license.
l Add cameras and users.
l Create a video synopsis.
l Use BriefCam Syndex to efficiently search for specific activities.
- 34 -
ADVANCED 20m
Take Course
Integrating Lenel OnGuard Access Control in Milestone XProtect

Lenel OnGuard is an access control software. The course covers how to configure and use the Access Con-
trol Module (ACM) integration between Milestone XProtect Corporate and the Lenel OnGuard access con-
trol system. After completion, partners and integrators will be able to:
l Configure Lenel OnGuard for single sign-on.

l Install .NET 4.5.2 on the Lenel OnGuard system.
l Install ACM server on the Lenel OnGuard system.
l Install the ACM MIP plug-in on the XProtect Management Server.
l Configure the ACM module in XProtect Management Client.
l Define an alarm.
l Use the access control module in the XProtect Smart Client.
ADVANCED 30m
Take Course
Integrating Milestone XProtect Video into Lenel OnGuard

Lenel OnGuard is an access control software that has some VMS capability. Integrators may wish to add
more capabilities with Milestone XProtect VMS. After completion, partners and integrators will be able to:
l Download and install required software.

l Run a program to generate a key file.
l Receive the license from Milestone.
l Run a program to associate Milestone cameras with OnGuard cameras.
l Add Milestone video to Lenel OnGuard.
l Configure alarms.
l Record and export video.
ADVANCED 20m
Take Course
- 35 -
Maintaining and Troubleshooting XProtect

TheMaintaining and Troubleshooting XProtect series of courses will help
learners optimize and solve issues with Milestone VMS and NVR sytems.
Configuring the XProtect System Monitor

Delete this text and replace it with your own content.The XProtect Smart Client System Dashboard
provides customers with real-time system status with a tile-based dashboard that allows them to respond
proactively to problems. This eLearning course covers how to configure and use the System Monitor.
After completion, resellers who monitor their system health will be able to:
l Customize the system dashboard to monitor the particular servers and cameras that are important
to them.
l Change the free space thresholds for normal/warning/critical states.
l Set up rules to receive notifications on the system status.
INTERMEDIATE 20m
Take Course
Troubleshooting and Securing XProtect VMS with Server Logs

In Troubleshooting and Securing XProtect VMS with Server Logs, learners meet with virtual team mem-
bers to discover how using the Server Logs node in the XProtect Management Client can help System
Administrators track VMS activity, troubleshoot problems, and secure their systems.
After completion, learners in a support role will be able to:
l Adjust log settings and retention times to comply with organizational requirements.
l Identify server log components.
l Apply and clear log filters.
l Use System logs to view hardware, software, or communications activity.
l Use Audit logs to monitor configuration changes and operatior activity.
l Use Rule-triggered logs to create customized log messages.
l Export log entries for documentation.
INTERMEDIATE 30m
Take Course
- 36 -
Troubleshooting Network Connectivity in XProtect VMS Solutions

In Troubleshooting Network Connectivity in XProtect VMS Solutions, learners meet with a virtual team
member to troubleshoot connectivity issues in an XProtect VMS installation, using basic troubleshooting
tools.
After completion, system integrators and learners in a support role will be able to use the Command
Prompt, Windows Task Manager, and XProtect server status logs to:
l Diagnose and resolve a user login issue.

l Diagnose and resolve a Recording Server connectivity issue.
l Diagnose and resolve a device connectivity issue.
BEGINNER 45m
Take Course
- 37 -
Ensuring Secure Systems

The Ensuring Secure Systems series of courses highlights the identification
and mitigation of cybersecurity threats as well as avoiding privacy issues in
XProtect Video Management Software (VMS) systems.
Configuring and Using the Bulk Password Manager

This eLearning course covers how to configure a rule to change device passwords on a user-defined recur-
ring schedule. After completion, partners and integrators will be able to:
l Create a new rule.

l Selecting a time for recurrence..
l Change passwords on all devices.
BEGINNER 15m
Take Course
Hardening XProtect VMS

In the Hardening XProtect VMS course, you learn how to apply different types of security measures in
operating systems, networks, and XProtect VMS itself. After completion, integration engineers, and
designers will be able to:
l Describe common security problems with video surveillance installations.

l Explain how a holistic approach is needed to combat security risks.
l Determine critical considerations for choosing the appropriate security measures.
l Describe the process of implementing improved security.
INTERMEDIATE 30m
Take Course
Identifying Cybersecurity Threats

The Identifying Cybersecurity Threats course covers a broad array of cybersecurity topics that may impact
an XProtect VMS installation and other corporate IT systems and assets. These topics affect both end-user
organizations as well as systems integrators who design, deploy, and support the IP surveillance systems.
After completion, people in these roles will be able to identify threats against:
- 38 -
l Network, server, client, and device vulnerabilities.

l Physical access and tampering.
l Human or behavioral vulnerabilities.
BEGINNER 45m
Take Course
Managing Secure Access in XProtect Advanced

This course covers how to configure users and roles and profiles for a more secure system. After com-
pletion, partners and integrators working with XProtect Advanced will be able to:
l Describe the relationship of Users, Roles, and Profiles.

l Use the Principal of Least Privilege (PoLP).
l Create and copy a Role.
l Assign Users to Roles.
l Assign Profiles to Roles.
BEGINNER 20m
Take Course
Milestone Server Communication Encryption

In the Milestone Server Communication Encryption course, you explore encryption options for network
communications. After completion, designers and integrators will be able to:
l Describe the basics of computer-to-computer encryption.

l Explain server communication encryption.
l Determine critical considerations for enabling communication encryption.
l Describe the process of applying server communication encryption.
INTERMEDIATE 30m
Take Course
- 39 -
Developing with the MIP SDK

The Developing with the MIP SDK series of courses covers the development of
integrations with the Milestone Integration Platform Software Development
Kit (MIP SDK).
Developing MIP SDK Plug-in Integrations

The MIP SDK comes with a robust set of tools to create integrations to the XProtect VMS suite. This course
covers plug-in integrations, which run directly in the XProtect VMS environment. After completion,
developers will be able to:
l Open and run the MIPPlugin template.

l Create new types of XProtect VMS items with custom properties.
l Create a plug-in that can communicate with an external system, including:
l Reacting to incoming commands.
l Sending commands.
l Incorporating event handling in the rules system and the Smart Client map.
l Create Smart Client Plug-ins.
INTERMEDIATE 60m
eLearning Video
Developing MIP SDK Component Integrations

The MIP SDK comes with a robust set of tools to create
integrations to the XProtect VMS suite. This course covers component integrations, which are .NET-based
standalone applications that interface with the XProtect VMS. After completion, developers will be able
to:
l Open and run the MIPLibrary template.

l Manually and programmatically log into an XProtect VMS.
l Select items like cameras and other devices.
l View video.
l Listen for and trigger events.
INTERMEDIATE 60m
eLearning Video
- 40 -
Getting Started with the MIP SDK

The Milestone Integration Platform Software Developer Kit (MIP SDK) allows developers to integrate
applications into the Milestone XProtect products or to integrate XProtect features into their applications.
This course covers how to get started with the MIP SDK. After completion, developers will be able to:
l Define an integration to accomplish specific goals.

l Download and configure a MIP SDK environment.
l Examine samples that come with the SDK.
BEGINNER 45m
Take Course
MIP Driver Framework

In this course, you will learn about the MIP Driver Framework. After completion, you will be able to:
l Determine when using the MIP Driver Framework is appropriate.

l Describe the benefits and capabilities of the MIP Driver Framework.
l Explain the process of building and deploying a driver.
l Describe how to distribute a driver to XProtect® VMS users.
INTERMEDIATE 30m
Take Course
- 41 -
Exploring the Milestone Husky™

The Milestone Husky products are customizable workstation appliances pre-
installed with XProtect video management software (VMS). The Configuring
the Milestone Husky series of courses covers the design, installation, con-
figuration, and operation of Milestone Husky network video recorders (NVR).
- 42 -
Configuring and Using the Milestone Husky™ M10

This eLearning course covers the basic installation, configuration, and usage of the Milestone Husky M10.
Reseller technical installers or end-user administrators/operators who purchase the product without a
reseller get hands-on simulation practice:
l Preparing and connecting the Milestone Husky M10 to the network.

l Configuring the M10 by adding users and cameras.
l Configuring the camera settings.
l Viewing live video.
l Playing back and exporting recorded video.
BEGINNER 30m
Take Course
Exploring System Design Options with the Husky™ M500 Advanced

Exploring System Design Options with the Husky M500 Advanced introduces four sites with unique secur-
ity requirements and demonstrates how the Milestone Husky M500 Advanced NVR was used in each con-
figuration to support those requirements. After completing this course, system designers and salespeople
will be able to:
l Describe how the Husky M500 Advanced can be used as a stand-alone, all-in-one NVR.
l Describe how the Husky M500 Advanced can be used in large-scale, distributed systems.
l Describe how the Husky M500 Advanced can be used in complex, high-availability systems.
l Describe how the Husky M500 Advanced can be used in multi-site, centrally managed systems.
INTERMEDIATE 20m
Take Course
Exploring System Design Options with the Husky™ X Series

Exploring System Design Options with the Husky X8 introduces five sites with unique security require-
ments and demonstrates how the Milestone Husky X Series NVR was used in each configuration to sup-
port those requirements. After completing this course, system designers and salespeople will be able to:
l Describe how the Husky X2 can be used as a stand-alone, all-in-one NVR.

l Describe how the Husky X series can expand an installation.
l Describe how the Husky X8 can be used in large-scale, distributed systems.
l Describe how the Husky M500 Advanced can be used in complex, high-availability systems.
l Describe how the Husky M500 Advanced can be used in multi-site, centrally managed systems.
- 43 -
INTERMEDIATE 20m
Take Course
Exploring the Milestone Husky M20 Hardware

Exploring the Milestone Husky M20 Hardware covers the benefits of the Husky M20 hardware for low- to
middle-complexity deployments. After completion, customer-facing personnel will be able to describe the
value proposition surrounding:
l Two customer-replaceable hard drives.

l Integrated PoE managed switch with PoE+ on all ports.
l Intel Skylake (6th-generation).
l 200 Mbit/s recording rate.
l Alarm I/O: four in and four out.
BEGINNER 15m
Take Course
Exploring the Milestone Husky M20 Value and Benefits

The Milestone Husky M20 is a plug-and-play surveillance recording hardware platform. Pre-loaded with
XProtect Professional, it is ideal for low- to middle-complexity deployments. This course covers the value
propositions Husky M20 provides. After completion, customer-facing personnel will be able to describe
the value proposition surrounding:
l Lower cost of ownership.

l Ease of use.
l High quality.
BEGINNER 20m
Take Course
Exploring the Milestone Husky M500 Advanced

The Milestone Husky™ M500 Advanced is a purpose-built, high-density surveillance recording hardware
platform. The unit is preloaded with Milestone video management software: Milestone XProtect Expert
and XProtect Corporate. This course covers the key features of the Milestone Husky M500 Advanced net-
work video recorder (NVR). Interactive presentations illustrate the benefits of the Husky M500 Advanced
- 44 -
(M500A) and knowledge checks help reinforce product familiarity. After taking this course, salespeople
will be able to:
l Describe the features of the M500A that contribute to its high-performance NVR platform.
l Describe the features of the M500A’s scalable Milestone XProtect VMS software that enable its
solution versatility.
l Describe the features that enable simple and fast system sizing, setup, and installation of the
M500A.
l Describe the features that contribute to the low total cost of ownership for the M500A.
BEGINNER 10m
Take Course
Installing and Configuring the Milestone Husky M500 Advanced

The Milestone Husky M500 Advanced is a purpose-built 1 GbE NVR recording hardware platform with
scalable video management system (VMS) software. Users will install and configure the Husky M500A for
use as an all-in-one surveillance solution. After completion, installers and integrators will be able to:
l Prepare the Milestone Husky M500 Advanced for first-time use.

l Check the status of the Husky M500 Advanced hardware.
l Complete first-time setup of the Husky M500 Advanced.
l Use the Husky Assistant to configure the M500 Advanced.
l Add recording devices to the Husky M500 Advanced.
BEGINNER 30m
Take Course
Installing and Configuring the Milestone Husky™ M30 and M50

The Milestone Husky products are customizable workstation appliances pre-installed with XProtect video
management software (VMS). This course covers the basic installation and configuration of Milestone
Husky M30s and M50s. Reseller technical installers, integrators, and system administrators get hands-on
simulation practice:
l Prepare and connect a Milestone Husky M30 or M50 to the network.

l Configure a surveillance server using the Husky M30 or M50 Management Application.
l Configure the XProtect Smart Client.
BEGINNER 30m
Take Course
- 45 -
Installing and Configuring the Husky™ X2

The Milestone Husky X2 is a high- performing network video recorder designed for the mid-market. It
offers scalability and flexibility to meet your specific surveillance needs. This course covers the preparation,
installation, and configuration of XProtect on the Husky X2. After completion, field technicians will be
able to:
l Prepare and connect the Husky X2.

l Run the Windows Out of Box Experience (OOBE).
l Use the Husky Assistant to set up your Husky X2.
BEGINNER 15m
Take Course
Installing and Configuring the Husky™ X8

The Milestone Husky X8 is a high- performing server-class network video recorder designed for the high-
end market. It offers extreme reliability with component, storage, and application redundancy, ensuring
continuous uninterrupted operation. This course covers the preparation, installation, and configuration
of XProtect on the Husky X8. After completion, field technicians will be able to:
l Prepare and connect the Husky X8.

l Use the Windows OOBE and the Husky Assistant to set up the Husky X8.
BEGINNER 15m
Take Course
Installing the Milestone Husky™ M20

Users will install and configure the Husky M20 for low- to middle-complexity deployments. After com-
pletion, personnel will be able to:
l Connect cables and devices.

l Run the Husky Assistant.
l Create an I/O event to control a door.
l Create an event button in the Smart Client.
BEGINNER 15m
Take Course
- 46 -
Instructor-led
training
Milestone's expert trainers teach classes/workshops all over the globe in a number of different languages.
Our instructor-led training workshops use a combination of real-world scenarios and hands-on exercises to
build the knowledge and skills necessary to successfully design, install, and configure Milestone VMS
products to meet customer needs. These classes/workshops support the transfer of knowledge to on-the-
job performance through the use of checklists and job aids that learners take with them into the field.
Individuals who are looking to build their capabilities with Milestone products are encouraged to attend
our instructor-led training. These classes/workshops also help participants prepare for the corresponding
online certification assessments, which prove expertise with Milestone products and fulfill certification
requirements for various levels in the Channel Partner Program.
Attending instructor-led training classes/workshops does not include a certification. After attending a
class/workshop, a completion document for that event will be available in your online profile (transcript).
Check out this video to learn more about our instructor-led training!
Milestone Solution Design

This two-day training class provides attendees with the knowledge and skills needed to design Milestone
XProtect VMS surveillance systems that effectively support customers’ surveillance objectives and optimize
return on investment. It is designed to empower our partners to consistently meet their customers’ needs
and exceed their expectations. During this class, attendees will concentrate on best practices in customer
needs identification, information collection, and making video surveillance design decisions.
Attendees use the Milestone Solution Design Process, job aids, and additional tools provided in class to
design effective solutions for real-life scenarios. A professional facilitator guides attendees to meet stated
requirements and provides expertise in Milestone best practices.
View the Milestone Solution Design training class agenda here.
Target Audience
Individuals responsible for working with customers and designing security systems using Milestone
products
Individuals with limited system design experience will benefit most from attending this class.
This training class is not required prior to taking the Milestone Certified Design Engineer (MCDE) online
certification assessment but is recommended as preparation.
*For learners looking to earn the MCDE certification and who have experience in system design, we recom-
mend attempting the online assessment prior to enrolling in the class. We also recommend reviewing the
MCDE Study Guide, as it provides insight into the knowledge and skills required and how to best prepare
for the certification assessment.
Prerequisites
Prior to attending the Solution Design class, we require attendees to complete the Milestone Design
Engineer training track.
Training Track information is available in the eLearning section of the Milestone Partner Learning Portal.
2 days
In-Person Online
Milestone Technical Configuration Level 1

This three-day training workshop is designed to develop participant ability to install and configure mod-
erately complex XProtect VMS installations.
- 48 -
The workshop consists of a series of hands-on exercises where learners practice configuring the XProtect
Corporate VMS to specifications from realistic scenarios. Step-by-step instructions and a professional facil-
itator guide the learners as they configure systems according to sample specifications.
A final project allows learners to practice and demonstrate their skills in a more independent envir-
onment, but with continued support from the facilitator.
Participants leave with a detailed sequential checklist and annotated notes to help transfer their know-
ledge to the field.
View the Milestone Technical Configuration Level 1 training workshop agenda here.
Target Audience
Field technicians who are responsible for installing and configuring Milestone’s VMS product line of video
surveillance systems.
l Configure the Network and Server

l Install Milestone XProtect VMS Components
l Configure the Recording and Storage Settings
l Add Devices to the Recording Server
l Configure cameras
l Rules introduction
l Create Profiles
l Configure and use events
l Configure a Smart Wall
l Set Security
l Set Options
l Define alarms
l System monitoring
l Configure Mobile Server
l Milestone Interconnect
This training workshop is not required prior to taking the Milestone Certified Integration Technician
(MCIT) online certification assessment but is recommended as preparation.
*For learners looking to earn the MCIT online assessment after attending class, we recommend first
reviewing the MCIT Study Guide, as it provides insight into the knowledge and skills required and how to
best prepare for the certification assessment.
Prerequisites
Participants should have fundamental knowledge and skills with cameras, networks, and storage devices,
as well as with installing and configuring the XProtect Smart Client. To be successful in this workshop, you
- 49 -
should first complete the following:
1. Milestone Technical Configuration Level 1 Pre-workshop orientation

2. Milestone Integration Technician training track
Training Track information is available in the eLearning section of the Milestone Partner Learning Portal.
Cloud Labs
This training workshop is also available online! Contact your local Learning & Performance team for more
information. Contact information is found on page 44 of this catalog.
3 days
In-Person Online
- 50 -
Milestone Technical Configuration Level 2

This three-day training workshop is designed to further develop the ability to install and configure more
complex XProtect VMS installations.
During this workshop, participants work in small teams to modify and expand existing XProtect Corporate
VMS configurations to accommodate evolving customer business needs, as well as demonstrate what
each modification accomplishes. New requirements and requests introduce layers of complexity into the
surveillance installations and increase participants’ skills in handling challenging scenarios.
A final project allows learners to practice and demonstrate their skills in a more independent envir-
onment, but with continued support from the facilitator.
Participants leave with a detailed sequential checklist and annotated notes to help transfer their know-
ledge to the field.
View the Milestone Technical Configuration Level 2 workshop agenda here.
Target Audience
Milestone Certified Integration Technicians who are responsible for installing and configuring advanced
features of Milestone XProtect Corporate for high-complexity surveillance systems.
l Fine-tuning Mobile Server performing

l Advanced user security settings
l Automating Smart Client installation and startup behavior
l Working with advanced camera settings and unsupported cameras
l Complex event support
l Hot and cold failover
l Domain support
l Configuring Milestone Federated Architecture™
l Clustering servers
This training workshop is not required prior to taking the Milestone Certified Integration Engineer (MCIE)
online certification assessment but is recommended as preparation.
*For learners looking to earn the MCIE online assessment after attending class, we recommend first
reviewing the MCIE Study Guide, as it provides insight into the knowledge and skills required and how to
best prepare for the certification assessment.
Prequisites
To be eligible to attend, you must be a Milestone Certified Integration Technician.
3 days
In-Person
- 51 -
Certifications
Earning a Milestone certification proves expertise with our products and is a promise to end-customers of
the certificate holder's ability to design, install, and configure surveillance solutions that meet their needs.
Certifications are also required to progress in the MIlestone Channel Partner Program.
Our online certification assessments are available 24/7 from your computer or tablet and are available in
several languages. Each certification is valid for two years. Partners can register for and complete the online
certification assessments on the Partner Learning Portal.
We also have several tools available to help prepare for the online certification assessments, including
instructor-led training workshops, free eLearning courses, white papers, and Study Guides. These tools are
available to anyone who is interested in becoming Milestone certified.
Upon successfully passing a certification assessment, a diploma is made available in the learner's online pro-
file. The diplomas are printable and can be accessed when logged into the Partner Learning Portal.
In addition, after successfully passing a certification assessment, a "badge" is made available in the learner's
online profile. These "badges" can be exported and added to the learner's Outlook email signature and
LinkedIn profile.
Our certification assessments are available in the following languages: English, Spanish, Italian, German,
French, Brazilian Portuguese, Dutch, Russian, Turkish, Japanese, and Korean.
Milestone Certified Design Engineer (MCDE)

Milestone solution designers define surveillance objectives and document system and
operator behaviors to support those objectives. Designers also select devices, products,
components, networks, and storage products to include in the surveillance system. The
Milestone Certified Design Engineer (MCDE) assessment tests your ability to perform
these tasks.
*The MCDE is required for Gold and Platinum levels in the Channel Partner Program.
Prerequisites
We do not require any certifications or classes prior to taking the MCDE assessment, but we do recom-
mend reviewing the MCDE Study Guide. For those who are new to design, we also recommend attending
the Milestone Solution Design training class when preparing to take the assessment, in addition to review-
ing the MCDE Study Guide.
2h
Get Certified
Milestone Certified Integration Technician (MCIT)

Milestone Integration Technicians install and configure moderately complex XProtect
VMS installations with camera counts of 100-500 cameras. The Milestone Certified
Integration Technician (MCIT) assessment tests your ability to perform this task.
*The MCIT is required for the Gold and Platinum levels in the Channel Partner Program.
Prerequisites
Learners are not required to attend any training classes or complete certifications prior
to taking the MCIT assessment, but we do recommend reviewing the MCIT Study Guide.
For new installers, we also recommend attending the Milestone Technical Configuration Level 1 training
workshop, in addition to reviewing the MCIT Study Guide.
2h
Get Certified
- 53 -
Milestone Certified Integration Engineer (MCIE)

Milestone Integration Engineers install and configure complex XProtect VMS install-
ations with a camera counts of approximately 100-10,000 cameras, multiple Man-
agement Servers, multiple Mobile Servers, edge storage, multicast, clustering, and
other advanced configuration options. The Milestone Certified Integration Engineer
(MCIE) assessment tests your ability to perform these tasks.
*The MCIE is required for the Platinum level in the Channel Partner Program.
Prerequisites
An individual must be a Milestone Certified Integration Technician to be eligible to take the MCIE assess-
ment. Learners are not required to attend any training classes prior to taking the MCIE assessment, but
we do recommend reviewing the MCIE Study Guide. While it is not required, we recommend attending
the Milestone Technical Configuration Level 2 training workshop before taking the assessment, in addi-
tion to reviewing the MCIE Study Guide.
2h
Get Certified
- 54 -
Register
today
The Milestone Learning Portal makes it easy to find what you need--whether it is an eLearning course, an
upcoming training workshop in your area, or a certification assessment. the portal allows you to self-
register, pay, and even complete certification assessments.
Visit the Milestone Learning & Performance home page for more information and to access the portal.
Be sure to review the "How to Use This Portal" guide when first using the portal. This guide is available on
the portal's Home page, is available in several languages, and is a great tool for learning how to navigate
the portal.
Contact Us
Milestone has team members all over the world available to assist you.
For questions regarding our Learning Portal and our Training and Certification program, please contact
your region's Learning and Performance team.
Americas:
[email protected]
EMEA:
[email protected]
APAC:
[email protected]
Milestone Systems Inc.
5300 Meadows Road
Suite 400 © 2020 Milestone Systems
Lake Oswego, OR 97035 No portion of this material may be reproduced
Tel +1 503 350 1100 Fax +1 503 in any form without permission.
350 1199
www.milestonesys.com

Learning & Performance Catalog: We Empower People Worldwide

Uploaded by

Copyright:

Available Formats

Learning & Performance Catalog: We Empower People Worldwide

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Learning & Performance Catalog: We Empower People Worldwide

Uploaded by

Copyright:

Available Formats

WE EMPOWER PEOPLE WORLDWIDE

Contents Milestone Cloud Fundamentals 19

Ordering Licenses and

Configuring XProtect Mobile with Smart Con-

Exploring the Milestone Husky™ 42

XProtect VMS Deployment Best Practice

l Supplements Milestone manuals, guides, and white papers.

Available through the Milestone Deployment Assistant.

Deploying Single-server, Low-complexity

l Milestone Fundamentals of IP Surveillance Systems

l Getting Started with XProtect® VMS

l Configuring Storage and Archiving for XProtect VMS

Deploying Multi-server, Medium-complexity

l Configuring Storage and Archiving for XProtect VMS

l Configuring and Using Edge Storage in XProtect VMS

l Exploring XProtect VMS System Architecture and Communication

Deploying Multi-server, High-complexity

l Exploring XProtect VMS System Architecture and Communication

l Configuring XProtect DLNA Out

l Identifying Cybersecurity threats

The track includes:

l Identifying Cybersecurity Threats

This track includes:

l Milestone Fundamentals of IP Surveillance Systems

Milestone Cloud Solutions

Content Areas Covered

l Milestone Cloud Fundamentals

Exploring New XProtect® Features

Exploring XProtect 2020 R2 Update Features

l Smarter search with ONVIF-compatible metadata

l Customer dashboard improvements

l Video delivery excellence

l Online documentation portal

Exploring XProtect 2020 R1 Update Features

l Video processing service

l Desktop notifications for alarms

l LPR included in Centralized Search

l Additional functionality for ONVIF devices

l Online documentation portal

l Notification manager in Customer Dashboard

Exploring XProtect 2019 R3 Update Features

Exploring XProtect 2019 R1 Update Features

l Two-way audio in the Web Client

Exploring XProtect 2018 R3 Update Features

l New Log Server

Exploring XProtect 2018 R2 Update Features

l Building support in Smart Map

Exploring XProtect 2018 R1 Update Features

l Privacy Mask Enhancements

Exploring XProtect 2017 R3 Update Features

l Mobile Access Control

Exploring XProtect 2017 R2 Update Features

l Two new products for the mid-market

Exploring XProtect 2017 R1 Update Features

l Lower total cost of ownership (TOC)

Exploring XProtect 2016 R3

Getting Started with XProtect

Getting Started with XProtect VMS

l Identify Milestone Support resources.