Large Angle Stability - Loadcase 1 - IntactCode Criteria Value Units Actual

Status Margin %
GZ curve criteria Value of GMt at Pass
angle of equilibrium -10.0 deg
shall be greater than (>) 1.500 m 8.167 Pass +444.47

GZ curve criteria Value of GZ at Pass

spec. heel angle 30.0 deg
shall be greater than (>) 1.500 m 3.389 Pass +125.93

GZ curve criteria Value of max. GZ Pass

in the range from the greater of
angle of equilibrium -10.0 deg -10.0
to the lesser of
angle of max. GZ 21.8 deg 21.8
shall be greater than (>) 1.700 m 3.718 Pass +118.71
Intermediate values
angle at which this GZ occurs deg 21.8

GZ curve criteria Value of GZ at spec. angle or max. GZ below spec. angle

Pass
heel angle at which required GZ is constant 30.0 deg
required value of GZ at this angle is 0.200 m
limited by first flooding angle of the DownfloodingPoints n/a deg

GZ at 21.8 deg shall be greater than (>) 0.275 m 3.718 Pass +1252.00
Intermediate values
angle at which max. GZ occurs deg 21.8

GZ curve criteria Value of RM at spec. angle or max. RM below spec. angle

Pass
heel angle at which required RM is constant 30.0 deg
required value of RM at this angle is 200.000 N.m
limited by first flooding angle of the DownfloodingPoints n/a deg

RM at 21.8 deg shall be greater than (>) 275.000 N.m 261944492.079

Pass +95252442.57
Intermediate values
angle at which max. GZ occurs deg 21.8

GZ curve criteria Ratio of GZ values at phi1 and phi2 Fail

Phi1, first heel angle, the lesser of...
spec. heel angle 10.0 deg 10.0
Phi2, second heel angle, the lesser of...
angle of max. GZ 21.8 deg 21.8
GZ(phi1) / GZ(phi2) shall be less than (<) 60.00 % 76.14 Fail -26.90
Intermediate values
GZ(phi1) m 2.831
GZ(phi2) m 3.718

GZ curve criteria Angle of max. GZ Fail

first flooding angle of the DownfloodingPoints n/a deg
shall be greater than (>) 25.0 deg 21.8 Fail -12.73

GZ curve criteria Angle of equilibrium Fail

shall be less than (<) 10.0 deg -10.0 Fail +199.51

GZ curve criteria Ratio of equilibrium heel angle to the lesser of:

Fail
 spec. heel angle 15.0 deg 15.0
angle of deck edge immersion 28.4 deg
first flooding angle of the DownfloodingPoints n/a deg
shall be less than (<) 100.00 % -66.34 Fail +166.34
Intermediate values
Equilibrium angle deg -10.0

GZ curve criteria Equilibrium heel angle satisfies either: Fail

Ratio of equilibrium heel angle to the lesser of:
spec. heel angle 15.0 deg 15.0
angle of deck edge immersion 28.4 deg
first flooding angle of the DownfloodingPoints n/a deg
shall be less than (<) 100.00 % -66.34 Fail +166.34
or
Ratio of equilibrium heel angle to the lesser of:
spec. heel angle 17.0 deg 17.0
shall be less than (<) 100.00 % -58.54 Fail +158.54
Intermediate values
Equilibrium angle deg -10.0

GZ curve criteria Angle of downflooding Immersion angle not

valid.
shall be greater than (>) 70.0 deg Immersion angle not valid.

GZ curve criteria Angle of immersion of ... Immersion angle

not valid.
first flooding angle of the DownfloodingPoints
shall be greater than (>) 70.0 deg Immersion angle not valid.

GZ curve criteria Angle of vanishing stability Fail

shall be greater than (>) 90.0 deg 54.8 Fail -39.13

GZ curve criteria Range of positive stability Fail

from the greater of
spec. heel angle 0.0 deg 0.0
angle of equilibrium -10.0 deg
to the lesser of
first flooding angle of the DownfloodingPoints n/a deg
angle of vanishing stability 54.8 deg 54.8
shall be greater than (>) 120.0 deg 54.8 Fail -54.35

GZ curve criteria Range of positive stability (calc. req'd value)

Pass
req'd RoS = A + B phi_equi
from the greater of
spec. heel angle 0.0 deg 0.0
angle of equilibrium -10.0 deg
to the lesser of
first flooding angle of the DownfloodingPoints n/a deg
angle of vanishing stability 54.8 deg 54.8
req'd value const., A 7.0 deg
req'd value factor, B 1.5
shall be greater than (>) -7.9 deg 54.8 Pass -791.06

GZ curve criteria GZ area between limits type 1 - standard Fail

from the greater of
spec. heel angle 0.0 deg 0.0
angle of equilibrium -10.0 deg
to the lesser of
 spec. heel angle 30.0 deg
spec. angle above equilibrium 10.0 (0.0) deg 0.0
angle of first GZ peak 21.8 deg
angle of max. GZ 21.8 deg
first flooding angle of the DownfloodingPoints n/a deg
angle of vanishing stability 54.8 deg
shall be greater than (>) 0.0550 m.rad 0.0012 Fail -97.79

GZ curve criteria GZ area between limits type 2 - HSC monohull

Fail
from the greater of
spec. heel angle 0.0 deg 0.0
angle of equilibrium -10.0 deg
to the lesser of
spec. heel angle 30.0 deg
spec. angle above equilibrium 10.0 (0.0) deg 10.0 (0.0)
angle of first GZ peak 21.8 deg
angle of max. GZ 21.8 deg
first flooding angle of the DownfloodingPoints n/a deg
angle of vanishing stability 54.8 deg
lower heel angle 15.0 deg
required GZ area at lower heel angle 0.0700 m.rad
higher heel angle 30.0 deg
required GZ area at higher heel angle 0.0550 m.rad
shall be greater than (>) 0.0700 m.rad 0.0012 Fail -98.26

GZ curve criteria GZ area between limits type 3 - HSC multihull

Fail
from the greater of
spec. heel angle 0.0 deg 0.0
angle of equilibrium -10.0 deg
to the lesser of
spec. heel angle 30.0 deg
spec. angle above equilibrium 10.0 (0.0) deg 10.0 (0.0)
angle of first GZ peak 21.8 deg
angle of max. GZ 21.8 deg
first flooding angle of the DownfloodingPoints n/a deg
angle of vanishing stability 54.8 deg
higher heel angle 30.0 deg
required GZ area at higher heel angle 0.0550 m.rad
shall be greater than (>) 34.0137 m.rad 0.0012 Fail -100.00

GZ curve criteria Ratio of GZ area between limits Error with

area integration limits.
Area 1 from the greater of
spec. heel angle 0.0 deg
angle of equilibrium deg
Area 1 to the lesser of
spec. heel angle 90.0 deg
first flooding angle of the DownfloodingPoints deg
angle of vanishing stability deg
Area 2 from the lesser of
spec. heel angle 90.0 deg
first flooding angle of the DownfloodingPoints deg
angle of vanishing stability deg
Area 2 to
spec. heel angle 180.0 deg
Area 1 / Area 2 shall be greater than (>) 500.00 % Error with
area integration limits.
 Intermediate values
Area 1. m.rad
Area 2. m.rad

GZ curve criteria Ratio of positive to negative GZ area between limits

Heel angle range does not extend sufficiently high.
in the heel angle range from 0.0 deg
to 180.0 deg
shall be greater than (>) 500.00 % Heel angle range does
not extend sufficiently high.
Intermediate values
Positive area. 0.1532 m.rad
Negative area. -10.3981 m.rad

GZ curve criteria Probabilistic Damage Subdivision Index s-factor MSC.19(58)

Fail
Max. GZ in the range from the greater of
spec. heel angle 0.0 deg 0.0
angle of equilibrium -10.0 deg
to the lesser of
first flooding angle of the DownfloodingPoints n/a deg
angle of vanishing stability 54.8 deg 54.8
Apply upper limit to max. GZ 0.100 m
Apply upper limit to range of positive stability 20.0 deg
angle of equilibrium must be less than immersion angle of
PotentialDfloodingPoints n/a deg n/a
angle of equilibrium must be less than immersion angle of DeckEdge 28.4
deg Pass
shall be greater than (>) 1.0000 1.0000 Fail 0.00
Intermediate values
angle at which max. GZ occurs deg 21.8
C - value (equil: 10.0 deg) 1.000
Actual value of max. GZ m 3.718
Effective value of max. GZ m 0.100
Actual value of range of positive stability deg 54.8
Effective value of range of positive stability deg 20.0