1 CE131P - Introduction To Structural Analysis (Robles) PDF

INTRODUCTION TO
STRUCTURAL ANALYSIS
ENGR. KEVIN PAOLO V. ROBLES
THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles
1.1 INTRODUCTION
A structure refers to a system of connected parts used to support a load.

Important examples related to civil engineering include buildings, bridges,
and towers;
When designing a structure to serve a specified function for public use, the
engineer must account for its safety, esthetics, and serviceability, while
taking into consideration economic and environmental constraints. Often
this requires several independent studies of different solutions before final
judgment can be made as to which structural form is most appropriate. This
design process is both creative and technical and requires a fundamental
knowledge of material properties and the laws of mechanics which govern
material response. Once a preliminary design of a structure is proposed, the
structure must then be analyzed to ensure that it has its required stiffness
and strength.
MAPUA UNIVERSITY – School of Civil, Environmental and Geological Engineering
1.2 CLASSIFICATION OF STRUCTURUES
Structural Elements
Tie Rods. Structural members subjected to a

tensile force are often referred to as tie rods
or bracing struts. Due to the nature of this
load, these members are rather slender, and
are often chosen from rods, bars, angles, or
channels.

Structural Elements
Beams. Beams are usually straight horizontal

members used primarily to carry vertical
loads. Quite often they are classified
according to the way they are supported, as
indicated in Fig. 1-2.
Beams are primarily designed to resist
bending moment; however, if they are short
and carry large loads, the internal shear force
may become quite large and this force may
govern their design.

Structural Elements
Beams (continuation)
When the material used for a beam is a metal
such as steel or aluminum, the cross section
is most efficient when it is shaped as shown
in Fig. 1–3. Here the forces developed in the
top and bottom flanges of the beam form the
necessary couple used to resist the applied
moment M, whereas the web is effective in
resisting the applied shear V.

Structural Elements
Columns. Members that are generally vertical

and resist axial compressive loads are referred
to as columns, Fig. 1–4. Tubes and wide-flange
cross sections are often used for metal columns,
and circular and square cross sections with
reinforcing rods are used for those made of
concrete. Occasionally, columns are subjected to
both an axial load and a bending moment as
shown in the figure. These members are referred
to as beam columns.

Types of Structures The combination of structural elements and the
materials from which they are composed is referred to as
a structural system. Each system is constructed of one
or more of four basic types of structures..
Trusses. When the span of a structure is required to
be large and its depth is not an important criterion
for design, a truss may be selected. Planar trusses
are composed of members that lie in the same plane
and are frequently used for bridge and roof support,
whereas space trusses have members extending in
three dimensions and are suitable for derricks and
towers. Due to the geometric arrangement of its
members, loads that cause the entire truss to bend
are converted into tensile or compressive forces in
the members. THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles
Types of Structures
Cables and Arches. Two other forms of

structures used to span long distances
are the cable and the arch. Cables are
usually flexible and carry their loads in
tension The Arch achieves its strength
in compression, since it has a reverse
curvature to that of the cable. The arch
must be rigid, however, in order to
maintain its shape, and this results in
secondary loadings involving shear and
moment, which must be considered in
its design. Arches and cables are
frequently used in bridge structures. THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles
Types of Structures
Donting Lake Bridge, China

Types of Structures
Mandaue – Mactan
Bridge , Cebu City

Types of Structures
Proposed Binondo –
Intramuros Bridge,
Metro Manila
Types of Structures
Frames. Frames are often used in buildings

and are composed of beams and columns
that are either pin or fixed connected, Fig. 1–
7. Like trusses, frames extend in two or
three dimensions. The loading on a frame
causes bending of its members, and if it has
rigid joint connections, this structure is
generally “indeterminate” from a standpoint
of analysis. The strength of such a frame is
derived from the moment interactions
between the beams and the columns at the
rigid joints .

1 CE131P - Introduction To Structural Analysis (Robles) PDF

Uploaded by

Copyright:

Available Formats

1 CE131P - Introduction To Structural Analysis (Robles) PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

1 CE131P - Introduction To Structural Analysis (Robles) PDF

Uploaded by

Copyright:

Available Formats

INTRODUCTION TO

A structure refers to a system of connected parts used to support a load.

Tie Rods. Structural members subjected to a

THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles

Beams. Beams are usually straight horizontal

THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles

THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles

Columns. Members that are generally vertical

THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles

Cables and Arches. Two other forms of

Donting Lake Bridge, China

THEORY OF STRUCTURES 1 | Engr. Kevin Paolo V. Robles

Frames. Frames are often used in buildings

You might also like