Scribd
Upload
87 views3 pages

Falling Objects Fact Sheet

This fact sheet provides guidance for managing risks from falling objects at workplaces. It outlines that objects have the potential to fall and hit people if precautions are not taken. It describes examples of falling objects and emphasizes that PCBUs must manage risks from falling objects that could reasonably injure a person. Control measures discussed include fall prevention, fall arrest systems, isolation zones, securing loads, and maintaining and reviewing safety measures.

Uploaded by

Buwanah Selvaaraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
87 views3 pages

Falling Objects Fact Sheet

This fact sheet provides guidance for managing risks from falling objects at workplaces. It outlines that objects have the potential to fall and hit people if precautions are not taken. It describes examples of falling objects and emphasizes that PCBUs must manage risks from falling objects that could reasonably injure a person. Control measures discussed include fall prevention, fall arrest systems, isolation zones, securing loads, and maintaining and reviewing safety measures.

Uploaded by

Buwanah Selvaaraj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

FACT SHEET—FALLING OBJECTS

This fact sheet provides general guidance for persons conducting a business or undertaking
(PCBUs) and workers on managing risks to health and safety posed by falling objects.

Note: this fact sheet provides general information only and should not be used as a substitute
for seeking professional legal advice for your specific circumstances. The contents of this fact
sheet are correct and based on available information at the time of writing. However, there may
be subsequent decisions of courts or tribunals on the matter covered by this fact sheet which
mean that the contents are no longer accurate.

Falling objects
Objects have the potential to fall onto or hit people at the workplace or adjoining areas if
precautions are not taken. Adjoining areas could include a public footpath, road, square or the
yard of a dwelling or other building beside a workplace. Equipment, material, tools and debris
that can fall or be released sideways or upwards are also considered falling objects.
Examples include:
 an object free falling from a structure, such as:
o roof scaffolding, tools, rock, soil and bricks
o fixtures including pictures, ceiling panels and white boards that have not been
securely fixed, and
o materials that fall from over stacked shelving.

 an object free falling from lifting machinery, a vehicle or other plant equipment, including
loads being lifted that are not well secured or are unstable
 an object or material ejected while using machinery or hand tools
 the collapse of an unstable structure including shelves, benches and mezzanine floors not
strong enough to bear the weight of the objects kept on them.

The role of PCBUs


PCBUs must manage the risks associated with an object falling on a person if it is reasonably
likely to injure the person.
Adequate protection must be provided to minimise the risk and protect the person.
When managing risks, the risk must be eliminated, so far as is reasonably practicable. If
elimination is not reasonably practicable, the risks must be minimised so far as is reasonably
practicable.
This requires each relevant PCBU to provide and maintain a safe system of work including:fall
prevention, so far as is reasonably practicable, and
 fall prevention, so far as is reasonably practicable, and
 if fall prevention is not reasonably practicable—a system to arrest falling objects, so far
as is reasonably practicable.
Other control measures can include:
 use of ‘isolation’ or ‘no go’ zones where there is a risk of an object falling into an area

February 2012 1
 providing appropriate training and supervision
 use of suitable Personal Protective Equipment (PPE).
Administrative controls (such as safe work methods or procedures) and PPE should only be
used:
 when there are no other practical control measures are available (as a last resort)
 as an interim measure until a more effective way of controlling the risk can be used, and
 to supplement higher level control measures (as a backup).
Further information and guidance on selecting appropriate control measures is available in the
Code of Practice: How to Manage Work Health and Safety Risks.

Worker involvement in the risk management process


Consultation with workers and their health and safety representatives is required at each step of
the risk management process. By drawing on the experience, knowledge and ideas of workers,
PCBUs are more likely to identify all hazards and choose effective control measures.
Workers should be required to report any hazards and health and safety problems promptly so
risks can be managed before an incident occurs.
If there is a health and safety committee for the workplace, it should be engaged in the risk
management process as well.

Selecting control measures—fall prevention


Fall prevention must be considered and, so far as is reasonably practicable, implemented
before considering options for arresting the fall of objects. Control measures that can assist in
protecting persons from falling objects are suggested below.
Securing a load
To prevent objects from falling freely from one level to another when they are being stored a
secure physical barrier should be provided. Examples of additional control measures include:
 stacking items so they cannot slide, fall or collapse when they are stored above ground
level
 using netting or restraining bars to keep items in place when they are stored above
ground level so they cannot fall easily if they are disturbed
 following the safe load limit of the storage system when storing items
 ensuring shelving systems, barriers and other fittings are properly secured and well
maintained
 inspecting pallets each time before use to make sure they are in a safe condition
 loading pallets correctly to ensure load stability—banding, shrink or stretch wrap can
help with this.
Moving a load
When moving a load, a safe means of raising and lowering plant, materials and debris should
be provided. Examples of additional control measures include:
 handling equipment such as a fork-lift truck that is suitable for the job is properly
inspected, maintained and operated by competent and/or qualified persons as required
 following the safe working load limits and taking into account all relevant factors such as
stability of ground conditions, use of outriggers or stabilisers, slewing rate and wind
conditions (if applicable)
 making sure the load is balanced and secure when the load is lifted

February 2012 2
 enclosing areas that loads are being lifted over, and
 establishing ‘isolation’ or ‘no-go’ zones with barriers and trained workers to restrict
access.
Working at a height
Examples of controls for working at heights include:
 keeping large equipment at ground level
 good housekeeping, for example keeping the work area tidy and ensuring materials,
debris, tools and equipment that are not being used are out of the way
 if placing an item on a scaffold or platform, providing a secure physical barrier at the
edge of the elevated area, such as toe boards or infill panels that form part of a guardrail
system
 tethering or otherwise securing tools and materials to prevent them falling on people
below
 keeping tools or other materials away from edges and off of railings or sills
 using chutes when placing debris into a skip below a work area.
Demolition work
Principal contractors and other PCBUs involved in demolition work must provide adequate
protection to ensure objects do not fall onto or hit construction workers or other people in
adjoining areas such as a public footpath, road, and the yard of a dwelling or other building.

Selecting control measures—fall arrest


When considering control measures to contain or catch falling objects, identify the types of
objects that could fall, as well as the fall gradient and distance, to ensure that any protective
equipment or structures are strong enough to withstand the impact forces of the falling object.
Examples of these control measures include:
 erecting a covered pedestrian walkway
 erecting a catch platform with vertical sheeting or perimeter screening, and
 providing overhead protection on mobile plant.

Maintaining control measures


Each relevant PCBU must ensure control measures are:
 suitable for the nature and duration of the work
 installed and used correctly, and
 maintained in good working order.

Reviewing control measures


Controlling health and safety risks in the workplace is an ongoing process that needs to take
into account changes in the workplace. This is why procedures and risk control measures must
be reviewed regularly to ensure they are still effective.
More information
More information about the risk management process is available in the Codes of Practice: How
to Manage Work Health and Safety Risks and Construction Work.
Codes of Practice and other resources are available on the Safe Work Australia website:
http://www.safeworkaustralia.gov.au/Pages/default.aspx

February 2012 3

You might also like