0% found this document useful (0 votes)
215 views3 pages

STAR Exercise 4A

Uploaded by

ashraf-84
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
215 views3 pages

STAR Exercise 4A

Uploaded by

ashraf-84
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Star Exercise 4A

Purpose:
Determine the settings of protective devices.
Evaluate the coordination curves
Run PD Sequence-of-Operation for various locations and evaluate the results.

Procedure

Size Phase \ Ground CTs


Given the protection determine the size \ setting of PDs for phase and ground protection.
Use the standard \ recommended guidelines for determining the settings.

Low Voltage Motor Protection

LV_Mtr1
100 HP
0.46 kV
FLA: 110 A
LRC: 625.2%
1800 rpm
Hot Stall Time: 25 sec
Cold Stall Time: 30 sec
No Load Acceleration Time: 7 sec
Full Load Acceleration Time: 9 sec

PDs:
MCP: Cutler Hammer, HMCP-F
Overload Heater: Allen Bradley Bulletin520 Type J (Curve - Typical Class 20)

LV_Mtr2
30 HP
0.46 kV
FLA: 40 A
LRC: 600%
3600 rpm
Hot Stall Time: 18 sec
Cold Stall Time: 20 sec
No Load Acceleration Time: 3 sec
Full Load Acceleration Time: 5 sec

PDs:
Thermal Magnetic: Cutler Hammer, HFD
Overload Heater: General Electric, CR324

ETAP Workshop Notes ©1996-2009 Operation Technology, Inc. Page 1 of 3


Star Exercise 4A

Medium Voltage Motor Protection

MV-Mtr1
500 HP
4 kV
FLA: 60.58
LRC: 650%
3600 rpm
Hot Stall Time: 18 sec
Cold Stall Time: 23 sec
No Load Acceleration Time: 6 sec
Full Load Acceleration Time: 8 sec

PDs:
Relay (Siemens, 7SJ600: 49, 50)
400 A Contactor/Starter

MV_Mtr2
1500 HP
4 kV
FLA: 185.5 A
LRC: 510%
1800 rpm
Hot \ Cold Stall Time: 18 \ 23 sec
NL \ FL Acceleration Time: 6 \ 8 sec

PDs:
R-rated fuse (Westinghouse CLS)
Motor Relay (GE, 469: 49, 50, 50G)
400 A Contactor/Starter

Transformer Protection

T1 R11 ABB CO
T2 Fuse4 S&C SM-4
T3 Fuse2 ERMCO 9F54WLD
T4 Relay41 ABB DPU-2000R
T5 Fuse1-1 S&C SM-4

ETAP Workshop Notes ©1996-2009 Operation Technology, Inc. Page 2 of 3


Star Exercise 4A

Feeder Protection

Cable2 R12 ABB CO

Cable3 CB1-1 Cutler-Hammer DS-420


(Carriere LVSST) (FB600E)
Cable4 Relay32 GE Multilin IFC
Relay33 GE Multilin IAC-51N
(residual)
Syn1Fdr SR469 GE Multilin 469

All Equipment Cables (refer to motor protection)

Generator Protection

Gen1
13.8 kV
4 MW
85% PF
4 Pole

PD: GE G60 Relay

ETAP Workshop Notes ©1996-2009 Operation Technology, Inc. Page 3 of 3

You might also like