Subject Name & Code: DSP (R1632044) Date of Exam: 17-10-20: Write Ur Options in Below Table
Subject Name & Code: DSP (R1632044) Date of Exam: 17-10-20: Write Ur Options in Below Table
1 A 2 C 3 C 4 D 5 C
6 B 7 C 8 C 9 B 10 D
11 D 12 C 13 C 14 C 15 B
16 17 18 19 20
1 The anti-symmetric condition with M even is not used in the design of which of the following
linear-phase FIR filter?
a) Low pass b) High pass c) Band pass d) Bans stop
2. Which of the following is not suitable either as low pass or a high pass filter?
a) h(n) symmetric and M odd b) h(n) symmetric and M even
c) h(n) anti-symmetric and M odd d) h(n) anti-symmetric and M even
3. What is the width of the main lobe of the frequency response of a rectangular window of
length M-1?
a) π/M b) 2π/M c) 4π/M d) 8π/M
4. With an increase in the value of M, the height of each side lobe ____________
a) Do not vary b) Does not depend on value of M c) Decreases d) Increases
5. To reduce side lobes, in which region of the filter the frequency specifications have to be
optimized?
a) Stop band b) Pass band c) Transition band d) None of the mentioned
6.. Why is it desirable to optimize frequency response in the transition band of the filter?
a) Increase side lobe b) Reduce side lobe c) Increase main lobe d) None of the mentioned
7. What is the process of converting a signal from a given rate to a different rate?
a) Sampling b) Normalizing c) Sampling rate conversion d) None of the mentioned
11.. Which of the following is true about the filtering operation on x(n)?
a) Linear b) Time variant c) None of the mentioned d) Linear and time invariant
13. If HD(ω) is the frequency response of the low pass filter, then for what value of ω, HD(ω)=1?
a) |ω| = π/D b) |ω| ≥ π/D c) |ω| ≤ π/D d) None of the mentioned
14.Which of the following is introduced in the frequency sampling realization of the FIR filter?
a) Poles are more in number on unit circle b) Zeros are more in number on the unit circle
c) Poles and zeros at equally spaced points on the unit circle d) None of the mentioned
15. What happens after the signal is passed through the analog to digital converter in a DSP?
a) Changed back to analog b) Stored in a RAM c) Amplified d) Attenuated