Pneumatic Connectors PDF

Pneumatic Connectors,
Pneumatic Tubing & Cylinder

Control Accessories
2190 GB-ca
Index
Page No
Push-in Fittings Overview 1.3 - 1.7
Push-in Fittings 1.8 - 1.22
Push-in Fitting Dimensions 1.23 - 1.47
Cylinder Control Accessories 2.1 - 2.27
Flexible Pneumatic Tubing Overview 3.1 - 3.3
Nylon Tubing 3.4 - 3.6
Polyurethane Tubing 3.7 - 3.9
Tubing Accessories 3.10
Exhaust Silencers Overview 4.1 - 4.3
Exhaust Silencers 4.4 - 4.9
Pneumatic 1.2
Prestolok Fittings
Prestolok Micro Prestolok 2 Prestolok
For tube Ø mm 3-6 4-14 4-14 Refer to page

Threads Metric M3x0,5-M5x0,8 M5x0,8 M5x0,8
BSPP 1/8, 1/4 1/8-1/2 1/8-1/2
BSPT 1/8, 1/4 1/8-1/2 1/8-1/2
Material, body
- Plastic
- Brass (nickel plated)
Stud fittings 8-9
Threaded 90° Elbows 10 - 11
Threaded Tee's 12 - 13
Threaded Y-connectors 14 - 15
Threaded Multiple Fittings 14 - 15
Tube to Tube Straight Unions 16
Tube to Tube 90O Elbows 16
Tube to Tube Tee's 16
Tube to Tube Y-connectors 17
Tube to Tube Multiple Tee's 17
Reducers 18
Expanders 18
Plugs 18
Unions 18
Indicators 18
Plug-in 90O Elbow 19
Plug-in Tee's 19
Plug-in Y-connectors 19
Bulkhead Fittings 20
Manifolds 20
Banjo's 21
Protective Caps 22
Pneumatic 1.3
Prestolok Fittings
Prestolok Micro
• High resistance polyamide body
• Stud fittings brass nickle plated
• Miniature Fittings with full flow capacity
• Teflon coated BSPT threads
• Face seal with BSPP threads
• Positive hold with stainless steel grab ring
• Push button tube release
• For nylon or polyurethane tube
Prestolok 2
• High resistance polyamide body
• Stud fittings brass nickle plated
• Protective cap
• Ready-to-use fitting
• Posititive hold by a flexible grab ring
• Positive O-ring sealing
• Plastic push button
Prestolok
• Brass nickel plated body
• Use with plastic or metal tubing
• Positive hold by a flexible stainless steel grab ring
• Ready-to-use fitting
• Plastic push button
• Straight male connectors with internal hexagon
For detailed information see technical leaflet
Operating information
Prestolok Micro Prestolok 2 Prestolok

Working pressure 0,01 to 16 bar 0,01 to 25 bar 0,01 to 25 bar
Working temperature -25 °C to +80 °C -25 °C to +70 °C -25 °C to +100 °C
Ordering information
Prestolok fittings are sold in packs. The package quantities are indicated adjacent to the part numbers.
When ordering, order by the quantity required. For example : to obtain 20 Prestolok 2 Equal Union 4mm Tees,
purchase order should state:-
Qty 20 JPK4
Note
Orders received for Prestolok fittings in quantities other than pack quantity multiples will be rounded up to the nearest
multiple
Pneumatic 1.4
Prestolok Micro Fittings
Advantages
Wide product range suitable for all applications.
Full flow capacity.
Perfect miniaturisation. A multi-functional push-button. Ready to use fitting

The Prestolok Micro concept offers : • the new push button design • the Prestolok Micro range of fittings
encapsulates the fitting body to is manufactured ready to use,
• an ergonomic shape with small
prevent contamination of the
dimensions but allowing for saving time and reducing assembly
connection system,
excellent handling and manipulation • the profile of the push button costs,
of the fitting, enables simple and efficient • taper threads are treated with a
• compact dimensions allow disconnection of the tube, special Parker Teflon Coating (PTC).
efficient utilisation in applications • the marking of the tube diameter This factory applied treatment
where space is a decisive factor, and the optional choice of colour on enables the fitting to be connected
the push button enable simple and disconnected up to five times
• reduced size and weight which, are identification of circuits,
very important when used with without additional treatment,
• it ensures a uniform distribution of
unsupported pipe runs, • fittings with parallel threads are
the pushing force for easy
• excellent flow characteristics give disconnection. supplied with a pre-assembled fully
minimal pressure drop. • the one piece design makes the retained O-ring ensuring a perfect
push button unlosable. seal.
Positive retention with a flexible High resistance polyamide body. Mounting holes on shaped fittings.
grab ring. The use of high resistance polyamide On request, union connectors can be
• this system, invented, developed and offers : supplied equipped with mounting holes.
perfected by Parker, guarantees • Excellent mechanical characteristics This option permits :
excellent tube retention, (robustness), • Mounting in banks for compact
• the special radial shape of the teeth • High corrosion resistance, installations and simplified pipework,
of the grab ring do not damage the • UV resistant polymers gurarantee a • Facility for mounting on frames or
tube or affect the sealing, long service life. panels,
• the elasticity of the grab ring absorbs • Greater flexibility and additional
all vibration and impulsing, space saving.
• the design of the grab ring allows
the tube to rotate freely even under
pressure.
Pneumatic 1.5
Prestolok 2 Fittings
Advantages
Ready-to-use compact fitting
Wide product range covering all applications
Full flow capability
Protective cap High resistance polyamide body Ready-to-use fitting

The design of the Prestolok 2 thermo- The use of UV-resistant reinforced The Prestolok thermoplastic range is
plastic range permits the use of a polyamide provides : manufactured with brass nickel
protective cap for the following • weight saving, plated male threads ready for use :
functions : • excellent mechanical performance, • parallel threads are supplied with
• protection : prevents the ingress • compact design. a pre-assembled, fully retained
of dirt into the connection system,
• safety : eliminates the risk of The three grooves facilitate handling O-ring seal,
accidental disconnection, as the and positioning of elbows and tees. • taper threads are treated with a
push-button is made inaccessible, special Parker Teflon® Coating
A long service life is ensured by the
• identification : (PTC) for self sealing on
corrosion free body material.
• colour coding allows identification assembly, reusable up to five
of fluid lines, times without additional sealing
• tube sizes are marked on the material.
protective cap.
Positive hold by a flexible grab ring Positive O-ring sealing Plastic push button
• The special shape of the radial teeth • The smooth unmarked tube is in • Simple manual pressure on the user-
grab ring prevents longi-tudinal direct contact with the nitrile friendly push button allows instant
scratch marks on the tube. O-ring, giving a positive seal. disconnection of the tube.
• The elasticity of the grab ring • A unique back-up washer retains • Tube sizes are marked on the push
absorbs vibration and pulsating the O-ring in the optimum sealing button for easy identification.
pressure. position, protects it from the grab
• A twist-free assembly, the tube can ring, and prevents extrusion
rotate freely even under pressure. under pressure.
How to use
Assembly Disassembly
• Cut the tube square • Simply press on the push button and withdraw the tube
• Insert the tube into the fitting until it bottoms
Pneumatic 1.6
Prestolok Fittings
Advantages
Compact ready-to-use fitting
Wide product range covering all applications
Full flow capability
Brass nickel plated body Use with plastic or metal tubing Positive hold by a flexible stainless
Brass is a raw material providing : Prestolok is a high performance steel grab ring
push-in fitting. Designed for use • The special shape of the radial teeth
• robustness, with most types of plastic tubing of the grab ring prevents longitudi-
• excellent shock resistance, (polyamide, polyurethane, nal scratch marks on the tube.
• good temperature capability, polyethylene, Pebax, Teflon...), this •The elasticity of the grab ring absorbs
• excellent spark resistance. high performance fitting can also vibration and pulsating pressure.
be used with copper tubing* • A twist-free assembly, the tube can
Nickel plating gives improved conforming to DIN 1786, NFA51- rotate freely even under pressure.
corrosion resistance and a bright 120, BS 2871 Part 2 (tolerance
appearance which does not +0.05 mm). For steel, stainless steel
deteriorate. tubing or other raw material, please
contact your Parker sales engineer.
* Tube must be cut square and correctly deburred.
Ready-to-use fitting Straight male connectors with Plastic push button

The Prestolok range is manufactured internal hexagon •Simple manual pressure on the user-
with brass nickel plated male threads •The internal hexagon allows friendly push button allows instant
ready for use : vertical mounting with the use of disconnection of the tube.
• parallel threads are supplied with a an Allen key. Because the internal •Tube sizes are marked on the push
preassembled, fully retained O-Ring hexagon does not go completely button for easy identification.
seal, through the fitting, the fitting
•taper threads are treated with a cannot slip down the Allen key
special Parker Teflon® Coating during assembly.
(PTC) for self sealing on assembly, •The lack of external hexagon
re-usable up to five times without gives a significant reduction in
additional sealing material. the overall dimensions enabling
close mounting of these fittings to
give very compact installations.
How to use
Assembly Disassembly
• Cut the tube square (and correctly deburred for copper) • Simply press on the push button and withdraw
• Insert the tube into the fitting until it bottoms the tube
Pneumatic 1.7
BSPP and Metric Stud Fittings
Male connector - metric straight thread
Tube Thread Pack Metal
Ø1 B Qty Order code
1 B 3 M3x0,5 10 F8PMB3M3
3 M5x,0,8 10 F8PMB3M5
4 M3x,0,5 10 F8PMB4M3
4 M5x,0,8 10 F8PMB4M5
6 M5x,0,8 10 F8PMB6M5

3 M3x0,5 10 F28PMB3M3
1 B 3 M5x,0,8 10 F28PMB3M5
4 M3x,0,5 5 F28PMB4M3
4 M5x,0,8 10 F28PMB4M5
6 M5x,0,8 10 F28PMB6M5
Male connector - BSPP

4 1/8 10 F4PMB4-1/8
4 1/4 10 F4PMB4-1/4
1 B 6 1/8 10 F4PMB6-1/8
6 1/4 10 F4PMB6-1/4
8 1/8 10 F4PB8-1/8
8 1/4 10 F4PB8-1/4
8 3/8 10 F4PB8-3/8
10 1/4 10 F4PB10-1/4
10 3/8 10 F4PB10-3/8
10 1/2 10 F4PB10-1/2
12 1/4 10 F4PB12-1/4
12 3/8 10 F4PB12-3/8
12 1/2 10 F4PB12-1/2
14 3/8 10 F4PB14-3/8
14 1/2 10 F4PB14-1/2
Female - metric
1 B 3 M3x0,5 10 G8PMB3M3
3 M5x0,8 10 G8PMB3M5
4 M3x0,5 10 G8PMB4M3
4 M5x0,8 10 G8PMB4M5
Female connector - BSPP

4 1/8 10 G4PMB4-1/8
1 B 4 1/4 10 G4PMB4-1/4
6 1/8 10 G4PMB6-1/8
6 1/4 10 G4PMB6-1/4
8 1/8 10 G4PB8-1/8
8 1/4 10 G4PB8-1/4
For dimensions see page
Prestolok Micro page 23 to 30

Prestolok 2 page 31 to 39
Prestolok page 40 - 47
Pneumatic 1.8
BSPT Stud Fittings
Male connector - BSPT
Ø1 A Qty Order code
3 1/8 10 F23PMB3-1/8
1 A 4 1/8 10 F23PMB4-1/8
6 1/8 10 F23PMB6-1/8
6 1/4 10 F23PB6-1/4
8 1/8 10 F23PB8-1/8
8 1/4 10 F23PB8-1/4

4 1/8 10 F3PMB4-1/8
4 1/4 10 F3PMB4-1/4
1 A 6 1/8 10 F3PMB6-1/8
6 1/4 10 F3PMB6-1/4
8 1/8 10 F3PB8-1/8
8 1/4 10 F3PB8-1/4
8 3/8 10 F3PB8-3/4
10 1/4 10 F3PB10-1/4
10 3/8 10 F3PB10-3/8
10 1/2 10 F3PB10-1/2
12 1/4 10 F3PB12-1/4
12 3/8 10 F3PB12-3/8
12 1/2 10 F3PB12-1/2
14 3/8 10 F3PB14-3/8
14 1/2 10 F3PB14-1/2
Prestolok Micro page 23 to 30

Prestolok 2 page 31 to 39
Prestolok page 40 - 47
Pneumatic 1.9
BSPP and Metric Elbows
Adjustable male elbow - metric straight thread

Tube Thread Pack Plastic Metal
1
Ø1 B Qty Order code Order code
3 M3x0,5 10 C68PMK3M3
3 M5x0,8 10 C68PMK3M5
4 M3x0,5 10 C68PMK4M3
4 M5x0,8 10 C68PMK4M5 C68PB4M5
6 M5x0,8 10 C68PMK6M5 C68PB6M5
B
Adjustable male elbow - BSPP

4 1/8 10 C64PMK4-1/8 C64PB4-1/8
1 4 1/4 10 C64PMK4-1/4 C64PB4-1/4
6 1/8 10 C64PMK6-1/8 C64PB6-1/8
6 1/4 10 C64PMK6-1/4 C64PB6-1/4
8 1/8 10 C64PK8-1/8 C64PB8-1/8
8 1/4 10 C64PK8-1/4 C64PB8-1/4
8 3/8 10 C64PK8-3/8 C64PB8-3/8
10 1/4 10 C64PK10-1/4 C64PB10-1/4
10 3/8 10 C64PK10-3/8 C64PB10-3/8
B 12 1/4 10 C64PK12-1/4 C64PB12-1/4
12 3/8 10 C64PK12-3/8 C64PB12-3/8
14 3/8 10 C64PK14-3/8 C64PB14-3/8
14 1/2 10 C64PK14-1/2 C64PB14-1/2
Compact adjustable male elbow - metric straight thread

1 Ø1 B Qty Order code Order code
4 M5x0,8 10 C68SPK4M5 C68SPB4M5
Compact adjustable male elbow - BSPP

1 4 1/8 10 C64SPK4-1/8 C64SPB4-1/8
4 1/4 10 C64SPK4-1/4
6 1/8 10 C64SPK6-1/8 C64SPB6-1/8
6 1/4 10 C64SPK6-1/4 C64SPB6-1/4
8 1/8 10 C64SPK8-1/8 C64SPB8-1/8
8 1/4 10 C64SPK8-1/4 C64SPB8-1/4
8 3/8 10 C64SPK8-3/8 C64SPB8-3/8
B
10 1/4 10 C64SPB10-1/4
10 3/8 10 C64SPB10-3/8
12 1/4 10 C64SPB12-1/4
12 3/8 10 C64SPB12-3/8
12 1/2 10 C64SPB12-1/2
Adjustable extended male elbow - BSPP

Tube Thread Pack Plastic
1
4 1/8 10 C64LPMK4-1/8
4 1/4 10 C64LPMK4-1/4
6 1/8 10 C64LPMK6-1/8
6 1/4 10 C64LPMK6-1/4
Prestolok Micro (Plastic) page 23 to 30

Prestolok 2 (Plastic) page 31 to 39
Prestolok (Metal) page 40 - 47
Pneumatic 1.10
BSPT Elbows
Compact elbow - BSPT

4 1/8 10 C3PB4-1/8
1
6 1/8 10 C3PB6-1/8
6 1/4 10 C3PB6-1/4
8 1/8 10 C3PB8-1/8
8 1/4 10 C3PB8-1/4
10 1/4 10 C3PB10-1/4
10 3/8 10 C3PB10-3/8
A 12 3/8 10 C3PB12-3/8
12 1/2 10 C3PB12-1/2
14 3/8 10 C3PB14-3/8
14 1/2 10 C3PB14-1/2
Adjustable male elbow - BSPT

Ø1 A Qty Order code Order code
3 1/8 10 C63PMK3-1/8
4 1/8 10 C63PMK4-1/8 C63PB4-1/8
4 1/4 10 C63PMK4-1/4 C63PB4-1/4
1 6 1/8 10 C63PMK6-1/8 C63PB6-1/8
6 1/4 10 C63PMK6-1/4 C63PB6-1/4
8 1/8 10 C63PK8-1/8 C63PB8-1/8
8 1/4 10 C63PK8-1/4 C63PB8-1/4
8 3/8 10 C63PK8-3/8 C63PB8-3/8
10 1/4 10 C63PK10-1/4 C63PB10-1/4
10 3/8 10 C63PK10-3/8 C63PB10-3/8
10 1/2 10 C63PK10-1/2
12 1/4 10 C63PK12-1/4 C63PB12-1/4
A 12 3/8 10 C63PK12-3/8 C63PB12-3/8
12 1/2 10 C63PK12-1/2 C63PB12-1/2
14 3/8 10 C63PK14-3/8 C63PB14-3/8
14 1/2 10 C63PK14-1/2 C63PB14-1/2
Compact adjustable male elbow - BSPT

4 1/8 10 C63SPK4-1/8
1 4 1/4 10 C63SPK4-1/4
6 1/8 10 C63SPK6-1/8
6 1/4 10 C63SPK6-1/4
8 1/8 10 C63SPK8-1/8
8 1/4 10 C63SPK8-1/4
8 3/8 10 C63SPK8-3/8
A 10 1/4 5 C63SPK10-1/4
10 3/8 5 C63SPK10-3/8
10 1/2 5 C63SPK10-1/2
Adjustable extended male elbow - BSPT

M Tube Thread Pack Plastic Metal
4 1/8 10 C63LPK4-1/8 C63LPB4-1/8
1 4 1/4 10 C63LPK4-1/4 C63LPB4-1/4
6 1/8 10 C63LPK6-1/8 C63LPB6-1/8
C 6 1/4 10 C63LPK6-1/4 C63LPB6-1/4
8 1/8 10 C63LPK8-1/8 C63LPB8-1/8
8 1/4 10 C63LPK8-1/4 C63LPB8-1/4
N
C4
P
PTC
A
Threads are treated with Parker Teflon®
Coating (PTC) sealing material

Pneumatic 1.11
BSPP and Metric Tee Fittings
Adjustable male run tee - metric straight thread
B 3 M3x0,5 10 R68PMK3M3
3 M5x0,8 10 R68PMK3M5
3 M3x0,5 10 R68PMK4M3
4 M5x0,8 10 R68PMK4M5 R68PB4M5
6 M5x0,8 10 R68PMK6M5 R68PB6M5
1
Adjustable male run tee - BSPP

B
4 1/8 10 R64PMK4-1/8 R64PB4-1/8
4 1/4 10 R64PMK4-1/4 R64PB4-1/4
6 1/8 10 R64PMK6-1/8 R64PB6-1/8
6 1/4 10 R64PMK6-1/4 R64PB6-1/4
8 1/8 10 R64PK8-1/8 R64PB8-1/8
1
8 1/4 10 R64PK8-1/4 R64PB8-1/4
8 3/8 10 R64PK8-3/8 R64PB8-3/8
10 1/4 10 R64PK10-1/4 R64PB10-1/4
10 3/8 10 R64PK10-3/8 R64PB10-3/8
12 1/4 10 R64PK12-1/4 R64PB12-1/4
12 3/8 10 R64PK12-3/8 R64PB12-3/8
14 3/8 5 R64PK14-3/8 R64PB14-3/8
14 1/2 5 R64PK14-1/2 R64PB14-1/2
Adjustable male branch tee - metric straight thread

1 3 M3x0,5 10 S68PMK3M3
3 M5x0,8 10 S68PMK3M5
4 M3x0,5 10 S68PMK4M3
4 M5x0,8 10 S68PMK4M5 S68PB4M5
B
6 M5x0,8 10 S68PMK6M5 S68PB6M5
Adjustable male branch tee - BSPP

1
4 1/8 10 S64PMK4-1/8 S64PB4-1/8
4 1/4 10 S64PMK4-1/4 S64PB4-1/4
6 1/8 10 S64PMK6-1/8 S64PB6-1/8
6 1/4 10 S64PMK6-1/4 S64PB6-1/4
8 1/8 10 S64PK8-1/8 S64PB8-1/8
8 1/4 10 S64PK8-1/4 S64PB8-1/4
B
8 3/8 10 S64PK8-3/8 S64PB8-3/8
10 1/4 10 S64PK10-1/4 S64PB10-1/4
10 3/8 10 S64PK10-3/8 S64PB10-3/8
12 1/4 5 S64PK12-1/4 S64PB12-1/4
12 3/8 10 S64PK12-3/8 S64PB12-3/8
14 3/8 5 S64PK14-3/8 S64PB14-3/8
14 1/2 5 S64PK14-1/2 S64PB14-1/2
Pneumatic 1.12
BSPT Tee Fittings
Adjustable male run tee - BSPT
A 3 1/8 10 R63PMK3-1/8
4 1/8 10 R63PMK4-1/8 R63PB4-1/8
4 1/4 10 R63PMK4-1/4 R63PB4-1/4
6 1/8 10 R63PMK6-1/8 R63PB6-1/8
6 1/4 10 R63PMK6-1/4 R63PB6-1/4
1
8 1/8 10 R63PK8-1/8 R63PB8-1/8
8 1/4 10 R63PK8-1/4 R63PB8-1/4
8 3/8 10 R63PK8-3/8 R63PB8-3/8
10 1/4 10 R63PK10-1/4 R63PB10-1/4
10 3/8 10 R63PK10-3/8 R63PB10-3/8
12 1/4 10 R63PK12-1/4 R63PB12-1/4
12 3/8 10 R63PK12-3/8 R63PB12-3/8
12 1/2 5 R63PK12-1/2 R63PB12-1/2
14 3/8 5 R63PK14-3/8 R63PB14-3/8
14 1/2 5 R63PK14-1/2 R63PB14-1/2
Adjustable male branch tee - BSPT

1
3 1/8 10 S63PMK3-1/8
4 1/8 10 S63PMK4-1/8 S63PB4-1/8
4 1/4 10 S63PMK4-1/4 S63PB4-1/4
6 1/8 10 S63PMK6-1/8 S63PB6-1/8
6 1/4 10 S63PMK6-1/4 S63PB6-1/4
8 1/8 10 S63PK8-1/8 S63PB8-1/8
A
8 1/4 10 S63PK8-1/4 S63PB8-1/4
8 3/8 10 S63PK8-3/8 S63PB8-3/8
10 1/4 10 S63PK10-1/4 S63PB10-1/4
10 3/8 10 S63PK10-3/8 S63PB10-3/8
12 1/4 10 S63PK12-1/4 S63PB12-1/4
12 3/8 10 S63PK12-3/8 S63PB12-3/8
12 1/2 5 S63PK12-1/2 S63PB12-1/2
14 3/8 5 S63PK14-3/8 S63PB14-3/8
14 1/2 5 S63PK14-1/2 S63PB14-1/2

Pneumatic 1.13
BSPP and Metric Y and Multiple Fittings
Adjustable male Y connector - metric straight thread

3 M3x0,5 10 YJ68PMK3M3
1
B 4 M5x0,8 10 YJ68PMK4M5
1 6 M5x0,8 10 YJ68PMK6M5
Adjustable male Y connector - BSPP

4 1/8 10 YJ64PK4-1/8
1
4 1/4 10 YJ64PK4-1/4
B
6 1/8 10 YJ64PK6-1/8
1
6 1/4 10 YJ64PK6-1/4
8 1/8 10 YJ64PK8-1/8
8 1/4 10 YJ64PK8-1/4
Adjustable double male Y connector - BSPP

1
4 1/8 10 YJ564PK4-1/8
B
4 1/4 10 YJ564PK4-1/4
1
Adjustable male multiple tee - BSPP

Tube Tube Thread Pack Plastic
Ø1 Ø2 B Qty Order code
1 B 6 4 1/8 5 J664PK6-4-1/8
6 4 1/4 5 J664PK6-4-1/4
8 4 1/8 5 J664PK8-4-1/8
8 4 1/4 5 J664PK8-4-1/4
8 4 3/8 5 J664PK8-4-3/8
2 2 2 2 8 6 1/8 5 J664PK8-6-1/8
8 6 1/4 5 J664PK8-6-1/4
8 6 3/8 5 J664PK8-6-3/8
10 6 1/4 5 J664PK10-6-1/4
10 6 3/8 5 J664PK10-6-3/8

Pneumatic 1.14
BSPT Y and Multiple Fittings
Adjustable male Y connector - BSPT

3 1/8 10 YJ63PMK3-1/8
1
4 1/8 10 YJ63PMK4-1/8
A
6 1/8 10 YJ63PMK6-1/8
1 4 1/4 10 YJ63PK4-1/4
6 1/4 10 YJ63PK6-1/4
8 1/8 10 YJ63PK8-1/8
8 1/4 10 YJ63PK8-1/4
Adjustable double male Y connector - BSPT

1
4 1/8 5 YJ563PK4-1/8
A
4 1/4 5 YJ563PK4-1/4
1
Adjustable male multiple tee - BSPT

Tube Tube Thread Pack Plastic
Ø1 Ø2 A Qty Order code
1 A
6 4 1/8 5 J663PK6-4-1/8
6 4 1/4 5 J663PK6-4-1/4
8 4 1/8 5 J663PK8-4-1/8
8 4 1/4 5 J663PK8-4-1/4
8 4 3/8 5 J663PK8-4-3/8
2 2 2 2 8 6 1/8 5 J663PK8-6-1/8
8 6 1/4 5 J663PK8-6-1/4
8 6 3/8 5 J663PK8-6-3/8
10 6 1/4 5 J663PK10-6-1/4
10 6 3/8 5 J663PK10-6-3/8

Pneumatic 1.15
Tube to Tube Fittings
Equal union
Ø1 Pack Plastic Metal
Qty Order code Order code
3 10 HPMK3 -
1 4 10 HPMK4 HPB4
6 10 HPMK6 HPB6
8 10 HPK8 HPB8
10 10 HPK10 HPB10
12 10 HPK12 HPB12
14 10 HPK14 HPB14
Unequal union
Tube Tube Pack Plastic
Ø1 Ø2 Qty Order code
4 3 10 HPMK4-3
1 2 6 4 10 HPMK6-4
8 4 10 HPK8-4
8 6 10 HPK8-6
10 6 10 HPK10-6
10 8 10 HPK10-8
12 10 10 HPK12-10
Equal union elbow

Tube Pack Plastic Metal
Ø1 Qty Order code Order code
1
3 10 EPMK3
4 10 EPMK4 EPB4
6 10 EPMK6 EPB6
8 10 EPK8 EPB8
10 10 EPK10 EPB10
12 10 EPK12 EPB12
14 10 EPK14 EPB14
Equal union tee

1
3 10 JPMK3
4 10 JPMK4 JPB4
6 10 JPMK6 JPB6
8 10 JPK8 JPB8
10 10 JPK10 JPB10
12 10 JPK12 JPB12
14 5 JPK14 JPB14
Unequal union tee

1 1
6 4 10 JPK6-6-4
8 6 10 JPK8-8-6
10 8 10 JPK10-10-8
12 10 10 JPK12-12-10
4 6 10 JPK4-4-6
6 8 10 JPK6-6-8
2
8 10 10 JPK8-8-10
10 12 10 JPK10-10-12

Pneumatic 1.16
Tube to Tube Fittings
Equal union Y connector
Tube Pack Plastic
Ø1 Qty Order code
3 10 YJPMK3
1
1
4 10 YJPMK4
1 6 10 YJPMK6
8 10 YJPK8
10 10 YJPK10
Unequal union Y connector

4 3 10 YJPMK4-3
1
6 3 10 YJPMK6-3
2
6 4 10 YJPMK6-4
1
6 8 10 YJPK6-6-8
8 10 10 YJPK8-8-10
Union double Y connector

2
4 4 10 YJ5PK4
1
6 4 10 YJ5PK6-4
2
Multiple tee - 5 connections

1 1
6 4 5 J5PK6-4
8 4 5 J5PK8-4
8 6 5 J5PK8-6
10 6 5 J5PK10-6
2 2 2
Multiple tee - 6 connections

1 1
6 4 5 J6PK6-4
8 4 5 J6PK8-4
8 6 5 J6PK8-6
10 6 5 J6PK10-6
2 2 2 2

Pneumatic 1.17
Plug in Fittings
Tube end expander

Tube Tube Pack Plastic Metal
Ø1 Ø2 Qty Order code Order code
2 1 4 6 10 TE2PMK4-6 TEPB4-6
Tube end reducer

Tube Tube Pack Plastic Metal
Ø1 Ø2 Qty Order code Order code
4 3 10 TR2PMK4-3
6 4 10 TR2PK6-4 TRPB6-4
2 1 8 4 10 TR2PK8-4 TRPB8-4
8 6 10 TR2PK8-6 TRPB8-6
10 4 10 TR2PK10-4 TRPB10-4
10 6 10 TR2PK10-6 TRPB10-6
10 8 10 TR2PK10-8 TRPB10-8
12 6 10 TR2PK12-6 TRPB12-6
12 8 10 TR2PK12-8 TRPB12-8
12 10 10 TR2PK12-10 TRPB12-10
14 8 10 TR2PK14-8 TRPB14-8
14 10 10 TR2PK14-10 TRPB14-10
14 12 10 TR2PK14-12 TRPB14-12
Plug
3 10 FNPMK3
4 10 FNPK4 FNPB4
1 6 10 FNPK6 FNPB6
8 10 FNPK8 FNPB8
10 10 FNPK10 FNPB10
12 10 FNPK12 FNPB12
14 10 FNPK14 FNPB14
Double male union

Tube Pack Plastic
Ø1 Qty Order code
4 10 BPK4
1 6 10 BPK6
8 10 BPK8
10 10 BPK10
12 10 BPK12
14 10 BPK14
Pressure indicator
Tube Pack Plastic
Ø1 Qty Order code
1 4 10 TS2PK4
6 10 TS2PK6
8 10 TS2PK8

Pneumatic 1.18
Plug in Fittings
Compact plug-in elbow

1 Ø1 Ø2 Qty Order code
3 3 10 T2ESPMK3
3 4 10 T2ESPMK3-4
4 4 10 T2ESPMK4
6 6 10 T2ESPMK6
4 6 10 T2ESPMK4-6
2 8 8 10 T2ESPK8
Plug-in run tee

4 4 10 T2JJPK4
6 6 10 T2JJPK6
8 8 10 T2JJPK8
Plug in branch tee

4 4 10 T2JPK4
6 6 10 T2JPK6
8 8 10 T2JPK8
Equal plug in Y connector

Tube Pack Plastic
Ø1 Qty Order code
3 10 YJ2PMK3
4 10 YJ2PMK4
6 10 YJ2PMK6
8 10 YJ2PK8
Unequal plug in Y connector

2 4 3 10 YJ2PMK4-3
1
6 4 10 YJ2PMK6-4
Plug in double Y connector

2
1 6 4 5 YJ52PK6-4
2

Pneumatic 1.19
Bulkhead and Manifold Fittings
Bulkhead equal union

3 10 WPMB3
4 10 WPMB4 WPB4
1 6 10 WPMB6 WPB6
8 10 WPB8
10 10 WPB10
12 10 WPB12
14 10 WPB14
90° adjustable bulkhead union elbow

M Tube Pack Plastic Metal
4 10 WE6PK4 WE6PB4
1 6 10 WE6PK6 WE6PB6
L1 8 10 WE6PK8 WE6PB8
C 10 10 WE6PK10 WE6PB10
12 10 WE6PK12 WE6PB12
W L
B
C4
Adjustable male bulkhead Y connector

Tube Pack Plastic
Ø1 Qty Order code
1
1
4 10 WYJ6PK4
6 10 WYJ6PK6
1
8 10 WYJ6PK8
Manifold for 2 tubes and pressure indicator

Tube Pack Plastic
Ø1 Qty Order code
4 10 HS3PK4
6 10 HS3PK6
8 10 HS3PK8
Manifold for 3 tubes

1 1 Tube Pack Plastic
Ø1 Qty Order code
4 10 J3PK4
6 10 J3PK6
1 8 10 J3PK8
1 1

Pneumatic 1.20
Banjo's
Single banjo - assembled

3 M3x0,5 10 COR8PMB3M3
1 3 M5x0,8 10 COR8PMB3M5
4 M5x0,8 10 COR8PB4M5
4 1/8 10 COR4PB4-1/8
6 1/8 10 COR4PB6-1/8
B 6 1/4 10 COR4PB6-1/4
8 1/8 10 COR4PB8-1/8
8 1/4 10 COR4PB8-1/4
10 3/8 10 COR4PB10-3/8
Double banjo - assembled

4 M5x0,8 10 COR8PB4DM5
1
4 1/8 10 COR4PB4D1/8
6 1/8 10 COR4PB6D1/8
6 1/4 10 COR4PB6D1/4
B
8 1/8 10 COR4PB8D1/8
Banjo components (all Prestolok)

Tube Thread Single Body Double Body Single Bolt Stacking Bolt
Ø1 B Order code Order code Order code Order code
4 M5x0,8 CORPB4-5 CORPB4D5 SC8UM5-4 SC8UDM5-4
4 1/8 CORPB4-10 CORPB4D10 SC4U1/8-4 SC4UD1/8-4
8 1/4 CORPB8-13 SC4U1/4-6 SC4UD1/4-6
B 10 3/8 CORPB10-17 SC4U3/8-10 SC4UD3/8-10

Pneumatic 1.21
Protective Caps
Protective cap
Tube Colour Pack Plastic
Ø1 Qty Order code
4 White 10 C4W
4 Blue 10 C4BU
1 4 Green 10 C4G
4 Red 10 C4R
4 Yellow 10 C4Y
4 Black 10 C4BL
6 White 10 C6W
6 Blue 10 C6BU
6 Green 10 C6G
6 Red 10 C6R
6 Yellow 10 C6Y
6 Black 10 C6BL
8 White 10 C8W
8 Blue 10 C8BU
8 Green 10 C8G
8 Red 10 C8R
8 Yellow 10 C8Y
8 Black 10 C8BL
10 White 10 C10W
10 Blue 10 C10BU
10 Green 10 C10G
10 Red 10 C10R
10 Yellow 10 C10Y
10 Black 10 C10BL
12 White 10 C12W
12 Blue 10 C12BU
12 Green 10 C12G
12 Red 10 C12R
12 Black 10 C12BL
14 White 10 C14W
14 Blue 10 C14BU
14 Green 10 C14G
14 Red 10 C14R
14 Yellow 10 C14Y
14 Black 10 C14BL

Pneumatic 1.22
Prestolok Micro - Dimensions
Male - metric straight thread

Weight
N J 1 B Part number C E J N g.
3 M3x0.5 F8PMB3M3 7 6.5 3.25 11.45 5
E 1 B 3 M5x0.8 F8PMB3M5 7 6.5 3.50 11.20 5
4 M3x0.5 F8PMB4M3 8 7.9 3.25 11.95 5
4 M5x0.8 F8PMB4M5 8 7.9 3.50 11.80 7
C 6 M5x0.8 F8PMB6M5 11 10.5 3.50 14.80 7

Weight
1 B Part number E J N *Int. H g.
N J 3 M3x0.5 F28PMB3M3 7.0 3.25 13.65 1.5 5
3 M5x0.8 F28PMB3M5 6.5 3.50 9.80 2.0 5
4 M3x0.5 F28PMB4M3 7.9 3.25 14.15 1.5 6
E 1 B 4 M5x0.8 F28PMB4M5 7.9 3.50 11.70 2.0 6
6 M5x0.8 F28PMB6M5 10.5 3.50 14.80 2.0 7
*This fitting has been designed for use where space is at a premium.
It is assembled using the internal hexagon and an Allen key.

Weight
N J 1 B Part number C E J N g.
4 G 1/8 A F4PMB4-1/8 13 7.9 5.0 7.9 8
4 G 1/4 A F4PMB4-1/4 16 7.9 5.5 7.9 12
E 1 B 6 G 1/8 A F4PMB6-1/8 13 10.5 5.0 12.3 10
6 G 1/4 A F4PMB6-1/4 16 10.5 5.5 8.8 14
Female - metric
Weight
L 1 B Part number C E J L g.
J
3 M3x0.5 G8PMB3M3 7 6.5 4.25 14.05 5
3 M5x0.8 G8PMB3M5 7 6.5 6.60 17.90 5
E 1 B 4 M3x0.5 G8PMB4M3 8 7.9 4.25 14.55 5
4 M5x0.8 G8PMB4M5 8 7.9 6.60 18.40 5
C
Female - BSPP
Weight
L 1 B Part number C E J L g.
J
4 Rp 1/8 G4PMB4-1/8 13 7.9 8 19.9 9
4 Rp 1/4 G4PMB4-1/4 16 7.9 10 21.9 15
6 Rp 1/8 G4PMB6-1/8 13 10.5 8 22.8 10
E 1 B 6 Rp 1/4 G4PMB6-1/4 16 10.5 10 24.8 15
Pneumatic 1.23

Weight
1 A Part number E P R Int. H g.
R internal 3 R 1/8 F23PMB3-1/8 6.5 6.5 10.2 2.0 4
hex
4 R 1/8 F23PMB4-1/8 7.9 6.5 11.4 2.5 5
6 R 1/8 F23PMB6-1/8 10.5 6.5 14.1 3.0 7
E 1 A
This fitting has been designed for use where space is at a premium.
It is assembled using the internal hexagon and an Allen key.
PTC P

Coating (PTC) sealing material.

Weight
1 A Part number C P R g.
R
PTC 4 R 1/8 F3PMB4-1/8 10 6.5 11.4 7
4 R 1/4 F3PMB4-1/4 14 10.0 13.4 11
6 R 1/8 F3PMB6-1/8 11 6.5 14.8 10
E A 6 R 1/4 F3PMB6-1/4 14 10.0 13.8 16
C
P


Weight
1 B Part number C E J M N g.
M
3 M3x0.5 C68PMK3M3 7 7.3 3.25 11.25 9.2 6
3 M5x0.8 C68PMK3M5 7 7.3 3.50 11.25 9.2 6
E 1
4 M3x0.5 C68PMK4M3 8 8.5 3.25 12.65 9.8 6
N 4 M5x0.8 C68PMK4M5 8 8.5 3.50 12.65 9.8 6
C
6 M5x0.8 C68PMK6M5 11 11.5 3.50 16.70 11.7 7
J
Adjustable extended male elbow - metric straight thread

Weight
M 1 B Part number C E J M N g.
3 M3x0.5 C68LPMK3M3 6 7.3 3.25 11.25 17.0 7
E 1 3 M5x0.8 C68LPMK3M5 8 7.3 3.50 11.25 17.0 8
4 M3x0.5 C68LPMK4M3 8 8.5 3.25 12.65 18.8 8
N
4 M5x0.8 C68LPMK4M5 8 8.5 3.50 12.65 18.8 8
C
6 M5x0.8 C68LPMK6M5 10 11.5 3.50 16.70 23.7 9
Pneumatic 1.24
Adjustable extended male elbow - BSPP

Weight
M
4 G 1/8 A C64LPMK4-1/8 13 8.5 5.0 12.65 17.2 10
E 1 4 G 1/4 A C64LPMK4-1/4 16 8.5 5.5 12.65 17.2 13
6 G 1/8 A C64LPMK6-1/8 13 11.5 5.0 16.70 23.7 12
N 6 G 1/4 A C64LPMK6-1/4 16 11.5 5.5 16.70 21.7 12
C

Weight
1 A Part number C E M P R g.
M
3 R 1/8 C63PMK3-1/8 10 7.3 11.25 6.5 11.6 6
C
4 R 1/8 C63PMK4-1/8 10 8.5 12.65 6.5 12.2 6
E 1
4 R 1/4 C63PMK4-1/4 14 8.5 12.65 10.0 14.2 6
R 6 R 1/8 C63PMK6-1/8 11 11.5 16.70 6.5 13.7 7
6 R 1/4 C63PMK6-1/4 14 11.5 16.70 10.0 15.7 7
P
A PTC


Weight
M N J
3 M3x0.5 R68PMK3M3 7 7.3 3.25 11.25 9.2 6
3 M5x0.8 R68PMK3M5 7 7.3 3.50 11.25 9.2 6
1 B 4 M3x0.5 R68PMK4M3 8 8.5 3.25 12.65 9.8 7
4 M5x0.8 R68PMK4M5 8 8.5 3.50 12.65 9.8 7
M C
6 M5x0.8 R68PMK6M5 11 11.5 3.50 16.70 11.7 8

Weight
M N J 1 B Part number C E J M N g.
4 G 1/8 R64PMK4-1/8 13 8.5 5.0 12.65 8.2 7
1 B 4 G 1/4 R64PMK4-1/4 16 8.5 5.5 12.65 8.2 7
6 G 1/8 R64PMK6-1/8 13 11.5 5.0 16.70 11.7 8
M 6 G 1/4 R64PMK6-1/4 16 11.5 5.5 16.70 9.7 9
C
Pneumatic 1.25
Weight
M M 3 M3x0.5 S68PMK3M3 7 7.3 3.25 11.25 9.2 6
3 M5x0.8 S68PMK3M5 7 7.3 3.50 11.25 9.2 6
E 1 4 M3x0.5 S68PMK4M3 8 8.5 3.25 12.65 9.8 7
4 M5x0.8 S68PMK4M5 8 8.5 3.50 12.65 9.8 7
N
6 M5x0.8 S68PMK6M5 11 11.5 3.50 16.70 11.7 8
C J

Weight
M M 4 G 1/8 A S64PMK4-1/8 13 8.5 5.0 12.65 8.2 7
4 G 1/4 A S64PMK4-1/4 16 8.5 5.5 12.65 8.2 7
E 1 6 G 1/8 A S64PMK6-1/8 13 11.5 5.0 16.70 11.7 8
N 6 G 1/4 A S64PMK6-1/4 16 11.5 5.5 16.70 9.7 9
C J

M R
Weight
PTC
3 R 1/8 R63PMK3-1/8 10 7.3 11.25 6.5 11.6 7
1 A 4 R 1/8 R63PMK4-1/8 10 8.5 12.65 6.5 12.2 7
M
4 R 1/4 R63PMK4-1/4 14 8.5 12.65 10.0 14.2 7
P 6 R 1/8 R63PMK6-1/8 11 11.5 16.70 6.5 13.7 8
C
6 R 1/4 R63PMK6-1/4 14 11.5 16.70 10.0 15.7 8
E Threads are treated with Parker Teflon®


Weight
M M
3 R 1/8 S63PMK3-1/8 10 7.3 11.25 6.5 11.6 7
4 R 1/8 S63PMK4-1/8 10 8.5 12.65 6.5 12.2 7
E 1
4 R 1/4 S63PMK4-1/4 14 8.5 12.65 10.0 14.2 7
R 6 R 1/8 S63PMK6-1/8 11 11.5 16.70 6.5 13.7 8
C 6 R 1/4 S63PMK6-1/4 14 11.5 16.70 10.0 15.7 8
P
A PTC

Pneumatic 1.26
Adjustable male Y connector - metric straight thread

Weight
1 B Part number C J L1 L2 N g.
N J
3 M3x0.5 YJ68PMK3M3 8 3.25 14.0 6.7 24.2 7
4 M5x0.8 YJ68PMK4M5 9 3.50 16.6 8.1 26.2 7
1 6 M5x0.8 YJ68PMK6M5 12 3.50 22.3 10.8 34.1 8
L1 L2 B
1
C

Weight
1 A Part number C L1 L2 P R g.
R 3 R 1/8 YJ63PMK3-1/8 10 14.0 6.7 6.5 27.2 7
PTC 4 R 1/8 YJ63PMK4-1/8 10 16.6 8.1 6.5 29.4 7
1 6 R 1/8 YJ63PMK6-1/8 11 22.3 10.8 6.5 36.4 9
L1 L2 A
1
C P

Equal union
Weight
1 2 Part number E L g.
L
3 3 HPMK3 7.3 19.8 2
4 4 HPMK4 8.5 21.8 3
E 1 2 6 6 HPMK6 11.5 27.8 3
Unequal union
Weight
1 2 Part number E L g.
L 4 3 HPMK4-3 8.5 21.2 2
6 4 HPMK6-4 11.5 27.8 3
E 1 2
Equal elbow
Weight
M 1 Part number E M g.
3 EPMK3 7.3 11.25 2
1
4 EPMK4 8.5 12.65 3
M 6 EPMK6 11.5 16.70 3
Pneumatic 1.27
Equal tee
L Weight
1 Part number E L M g.
M M
3 JPMK3 7.3 22.5 11.25 3
1 4 JPMK4 8.5 25.3 12.65 3
6 JPMK6 11.5 33.4 16.70 4
M
Equal Y union
Weight
1 2 Part number L L1 L2 g.
L
3 3 YJPMK3 22.0 13.9 6.7 3
4 4 YJPMK4 24.8 16.4 8.1 4
6 6 YJPMK6 31.8 22.2 10.8 5
1
L1 L2 2
1
Unequal Y union
Weight
1 2 Part number L L1 L2 g.
L
4 3 YJPMK4-3 24.2 16.4 8.1 3
6 3 YJPMK6-3 31.2 22.2 10.8 4
6 4 YJPMK6-4 31.8 22.2 10.8 4
1
L1 L2 2
1
Tube end expander

Weight
1 2 Part number L g.
L 6 4 TE2PMK4-6 31.7 2
2 1
Tube end reducer

Weight
1 2 Part number L g.
L
3 4 TR2PMK4-3 26.4 2
2 1
Pneumatic 1.28
Plug
Weight
1 Part number L g.
L 3 FNPMK3 22 1

Weight
M 1 2 Part number E H M g.
3 3 T2ESPMK3 7.3 16 11.25 2
E 1 3 4 T2ESPMK3-4 7.3 16 11.25 2
4 4 T2ESPMK4 8.5 16 12.65 2
4 6 T2ESPMK4-6 8.5 17 12.65 2
H 6 6 T2ESPMK6 11.5 17 16.70 3
Equal plug-in Y union

Weight
1 2 Part number H L L1 L2 g.
L
H
3 3 YJ2PMK3 16 35.7 13.9 6.7 3
4 4 YJ2PMK4 16 37.9 16.4 8.1 3
6 6 YJ2PMK6 17 45.9 22.2 10.8 3
1
L1 L2 2
1
Unequal plug-in Y union

Weight
1 2 Part number H L L1 L2 g.
L
4 3 YJ2PMK4-3 16 37.9 16.4 8.1 3
H
6 4 YJ2PMK6-4 16 44.9 22.2 10.8 4
1
L1 L2 2
1
Pneumatic 1.29

W Weight
1 B Part number C L maxi. g.
L
W 3 M8x1 WPMB3 12 20.15 5 10
4 M10x1 WPMB4 14 21.15 5 11
6 M12x1 WPMB6 16 26.00 8 13
1 1
C C
B
Banjo - metric straight thread

Weight
1 B Part number C4 E J K M N T g.
M
C4 3 M3x0.5 COR8PMB3M3 6 6.5 3.25 0.5 12.5 10 4 5
3 M5x0.8 COR8PMB3M5 8 6.5 4.50 0.5 13.5 10 4 5
E 1 N
K T
J
Pneumatic 1.30
Prestolok 2 - Dimensions
M 1 3 B Part number C4 J M N O Width Weight

dia. Q g.
O 1
8 4.2 1/8 C64PK8-1/8 14 6 22.5 29.0 17 19.0 22
8 4.2 1/4 C64PK8-1/4 19 9 22.5 34.0 17 19.0 35
8 4.2 3/8 C64PK8-3/8 22 9 22.5 35.0 17 19.0 49
ø 3xQ N 10 4.2 1/4 C64PK10-1/4 19 9 28.5 39.0 21 23.5 45
10 4.2 3/8 C64PK10-3/8 22 9 28.5 40.0 21 23.5 60
C4 12 4.2 1/4 C64PK12-1/4 19 9 30.0 40.5 23 25.5 56
J
12 4.2 3/8 C64PK12-3/8 22 9 30.0 41.5 23 25.5 60
14 4.2 3/8 C64PK14-3/8 22 9 33.5 45.0 25 27.5 74
B 14 4.2 1/2 C64PK14-1/2 27 12 33.5 49.5 25 27.5 103

M
1 B Part number C4 H J M O Weight
g.
O 1 4 M5x0.8 C68SPK4M5 10 15.5 5 20.5 13 6

H
C4 J Our fittings are supplied without cap. Cap must be ordered separately

1 3 A Part number C4 M N O P Width Weight
M
dia. Q g.
8 4.2 1/8 C63PK8-1/8 14 22.5 29.5 17 7.5 19.0 20

O 1 8 4.2 1/4 C63PK8-1/4 14 22.5 32.5 17 11.0 19.0 27
8 4.2 3/8 C63PK8-3/8 17 22.5 34.0 17 11.5 19.0 38
N
10 4.2 1/4 C63PK10-1/4 17 28.5 40.0 21 11.0 23.5 37
ø 3xQ
10 4.2 3/8 C63PK10-3/8 17 28.5 39.0 21 11.5 23.5 43
C4 P 10 4.2 1/2 C63PK10-1/2 22 28.5 42.0 21 15.0 23.5 63
12 4.2 1/4 C63PK12-1/4 19 30.0 41.5 23 11.0 25.5 55
PTC
12 4.2 3/8 C63PK12-3/8 19 30.0 41.0 23 11.5 25.5 59
A 12 4.2 1/2 C63PK12-1/2 22 30.0 44.5 23 15.0 25.5 68
Threads are treated with Parker Teflon® 14 4.2 3/8 C63PK14-3/8 22 33.5 45.5 25 11.5 27.5 68
Coating (PTC) sealing material 14 4.2 1/2 C63PK14-1/2 22 33.5 48.0 25 15.0 27.5 78

M
1 3 A Part number C4 M N O P Width Weight
dia. Q g.
O 1 4 3.2 1/8 C63LPK4-1/8 10 18.0 41.0 13 7.5 15 22

4 3.2 1/4 C63LPK4-1/4 14 18.0 45.0 13 11.0 15 46
6 4.2 1/8 C63LPK6-1/8 11 20.5 45.0 15 7.5 17 28
ø 3xQ 6 4.2 1/4 C63LPK6-1/4 14 20.5 49.0 15 11.0 17 48
N 8 4.2 1/8 C63LPK8-1/8 14 22.5 49.5 17 7.5 19 46
8 4.2 1/4 C63LPK8-1/4 14 22.5 52.0 17 11.0 19 51
C4
P
PTC
A
Pneumatic 1.31
Compact adjustable male elbow - BSPT
M
1 A Part number C4 H M O P Weight
g.
4 1/8 C63SPK4-1/8 10 14.5 20.5 13 6.5 9

O 1 H 4 1/4 C63SPK4-1/4 14 14.5 20.5 13 10.0 18
6 1/8 C63SPK6-1/8 11 16.5 23.0 15 6.5 14
C4 P 6 1/4 C63SPK6-1/4 14 16.0 23.0 15 10.0 21
8 1/8 C63SPK8-1/8 14 19.5 25.0 17 6.5 15
PTC
8 1/4 C63SPK8-1/4 14 18.5 25.0 17 10.0 25
A
8 3/8 C63SPK8-3/8 17 18.5 25.0 17 10.0 28
10 1/4 C63SPK10-1/4 17 23.0 31.0 21 10.0 30
Threads are treated with Parker Teflon® 10 3/8 C63SPK10-3/8 17 22.5 31.0 21 10.0 36
10 1/2 C63SPK10-1/2 22 24.0 31.0 21 12.5 45

M N
1 3 B Part number C4 J M N O Width Weight
dia. Q g.
J
8 4.2 1/8 R64PK8-1/8 14 6 22.5 29.0 17 19.0 26
O B 8 4.2 1/4 R64PK8-1/4 19 9 22.5 34.0 17 19.0 38
8 4.2 3/8 R64PK8-3/8 22 9 22.5 35.0 17 19.0 53
M C4 10 4.2 1/4 R64PK10-1/4 19 9 28.5 39.0 21 23.5 52
ø 3xQ 10 4.2 3/8 R64PK10-3/8 22 9 28.5 40.0 21 23.5 68
12 4.2 1/4 R64PK12-1/4 19 9 30.0 40.5 23 25.5 66
12 4.2 3/8 R64PK12-3/8 22 9 30.0 41.5 23 25.5 70
14 4.2 3/8 R64PK14-3/8 22 9 33.5 45.0 25 27.5 88
14 4.2 1/2 R64PK14-1/2 27 12 33.5 49.5 25 27.5 117
1
M M
1 3 B Part number C4 J M N O Width Weight
dia. Q g.
8 4.2 1/8 S64PK8-1/8 14 6 22.5 29.0 17 19.0 26

8 4.2 1/4 S64PK8-1/4 19 9 22.5 34.0 17 19.0 38
1 O
8 4.2 3/8 S64PK8-3/8 22 9 22.5 35.0 17 19.0 53
10 4.2 1/4 S64PK10-1/4 19 9 28.5 39.0 21 23.5 52
N ø 3xQ 10 4.2 3/8 S64PK10-3/8 22 9 28.5 40.0 21 23.5 68
J C4 12 4.2 1/4 S64PK12-1/4 19 9 30.0 40.5 23 25.5 66
12 4.2 3/8 S64PK12-3/8 22 9 30.0 41.5 23 25.5 70
14 4.2 3/8 S64PK14-3/8 22 9 33.5 45.0 25 27.5 88
B
14 4.2 1/2 S64PK14-1/2 27 12 33.5 49.5 25 27.5 117

M N 1 3 A Part number C4 M N O P Width Weight
P dia. Q g.
PTC
8 4.2 1/8 R63PK8-1/8 14 22.5 29.5 17 7.5 19.0 24
O A 8 4.2 1/4 R63PK8-1/4 14 22.5 32.5 17 11.0 19.0 31
8 4.2 3/8 R63PK8-3/8 17 22.5 34.0 17 11.5 19.0 42
M
C4 10 4.2 1/4 R63PK10-1/4 17 28.5 40.0 21 11.0 23.5 44
ø 3xQ 10 4.2 3/8 R63PK10-3/8 17 28.5 39.0 21 11.5 23.5 51
12 4.2 1/4 R63PK12-1/4 19 30.0 41.5 23 11.0 25.5 65
12 4.2 3/8 R63PK12-3/8 19 30.0 41.0 23 11.5 25.5 69
12 4.2 1/2 R63PK12-1/2 22 30.0 44.5 23 15.0 25.5 78
1 14 4.2 3/8 R63PK14-3/8 22 33.5 45.5 25 11.5 27.5 82
Threads are treated with Parker Teflon® 14 4.2 1/2 R63PK14-1/2 22 33.5 48.0 25 15.0 27.5 92
Pneumatic 1.32
M M 1 3 A Part number C4 M N O P Width Weight
dia. Q g.
8 4.2 1/8 S63PK8-1/8 14 22.5 29.5 17 7.5 19.0 24

O 1 8 4.2 1/4 S63PK8-1/4 14 22.5 32.5 17 11.0 19.0 31
8 4.2 3/8 S63PK8-3/8 17 22.5 34.0 17 11.5 19.0 42
10 4.2 1/4 S63PK10-1/4 17 28.5 40.0 21 11.0 23.5 44
ø 3xQ N
10 4.2 3/8 S63PK10-3/8 17 28.5 39.0 21 11.5 23.5 51
C4
P 12 4.2 1/4 S63PK12-1/4 19 30.0 41.5 23 11.0 25.5 65
PTC 12 4.2 3/8 S63PK12-3/8 19 30.0 41.0 23 11.5 25.5 69
A 12 4.2 1/2 S63PK12-1/2 22 30.0 44.5 23 15.0 25.5 78
14 4.2 3/8 S63PK14-3/8 22 33.5 45.5 25 11.5 27.5 82
14 4.2 1/2 S63PK14-1/2 22 33.5 48.0 25 15.0 27.5 92
Adjustable male Y connector - BSPP

1 B 3 Part number C4 J L L1 L2 Width U Weight
L
dia Q g.
J
4 1/8 3.2 YJ64PK4-1/8 14 6 38.5 22 11.0 15 14.4 22
1 4 1/4 3.2 YJ64PK4-1/4 19 9 43.5 22 11.0 15 14.4 37
U B L2 L1 6 1/8 4.2 YJ64PK6-1/8 14 6 46.5 30 13.5 17 17.0 26
1 6 1/4 4.2 YJ64PK6-1/4 19 9 51.5 30 13.5 17 17.0 37
C4 8 1/8 4.2 YJ64PK8-1/8 14 6 46.5 30 13.5 19 18.4 36
Ø3xQ
8 1/4 4.2 YJ64PK8-1/4 19 9 51.5 30 13.5 19 18.4 48
Union double Y connector adjustable male - BSPP
L
1 B 3 Part number C4 J L L1 L2 Width U Weight
dia. Q g.
J
4 1/8 3.2 YJ564PK4-1/8 14 6 42.5 22.5 9.5 24.5 14.4 27
1 4 1/4 3.2 YJ564PK4-1/4 19 9 47.5 22.5 9.5 24.5 14.4 43
U B L2 L1
1
C4
Ø3xQ
Adjustable male multiple tee - BSPP

1 2 3 B Part number C4 H J L L1 N Width Weight
L
dia. Q g.
J
1 B
6 4 4.4 1/8 J664PK6-4-1/8 10 27 7.5 103.0 70 18 15 35
H 6 4 4.4 1/4 J664PK6-4-1/4 14 27 11.0 108.0 70 18 15 46
C4
ø 3xQ 8 4 4.4 1/8 J664PK8-4-1/8 14 28 11.0 108.0 70 18 17 53
8 4 4.4 3/8 J664PK8-4-1/4 17 28 11.5 109.0 70 18 17 68
8 4 4.4 3/8 J664PK8-4-3/8 17 28 11.5 109.0 70 18 17 68
8 6 4.4 1/8 J664PK8-6-1/8 10 30 7.5 103.0 70 18 17 42
2 2 2 2
8 6 4.4 1/4 J664PK8-6-1/4 14 30 11.0 108.0 70 18 17 54
N N N
L1
8 6 4.4 3/8 J664PK8-6-3/8 17 30 11.5 109.0 70 18 17 67
10 6 4.4 1/4 J664PK10-6-1/4 14 33 11.0 117.9 70 18 21 69
10 6 4.4 3/8 J664PK10-6-3/8 17 33 11.5 118.9 70 18 21 84
Pneumatic 1.33
1 A 3 Part number C4 L L1 L2 P Width U Weight
L
dia. Q g.
P
4 1/4 3.2 YJ63PK4-1/4 14 42.0 22 11.0 11.0 15 14.4 26
1 6 1/4 4.2 YJ63PK6-1/4 14 50.0 30 13.5 11.0 17 17.0 31
U A L2 L1 8 1/8 4.2 YJ63PK8-1/8 14 47.0 30 13.5 7.5 19 18.4 34
1 8 1/4 4.2 YJ63PK8-1/4 14 50.0 30 13.5 11.0 19 18.4 41
PTC
C4 Ø3xQ

Union double Y connector adjustable male - BSPT
L 1 3 A Part number C4 L L1 L2 P Width U Weight

dia. Q g.
P
4 3.2 1/8 YJ563PK4-1/8 10 42.5 22.5 9.5 7.5 24.5 14.4 24
1
4 3.2 1/4 YJ563PK4-1/4 14 46.0 22.5 9.5 11.0 24.5 14.4 33
U A L2 L1
1
PTC
C4 Ø3xQ
Adjustable male multiple tee - BSPT

1 2 3 A Part number C4 H L L1 N P Width Weight
L
P
dia. Q g.
C4
1 A
6 4 4.4 1/8 J663PK6-4-1/8 10 27 103.0 70 18 7.5 15 31
H 6 4 4.4 1/4 J663PK6-4-1/4 14 27 106.5 70 18 11.0 15 40
Ø3xQ PTC 8 4 4.4 1/8 J663PK8-4-1/8 10 28 103.0 70 18 7.5 17 39
8 4 4.4 1/4 J663PK8-4-1/4 14 28 106.5 70 18 11.0 17 45
8 4 4.4 3/8 J663PK8-4-3/8 17 28 108.0 70 18 11.5 17 57
2 2 2 2
N N N
8 6 4.4 1/8 J663PK8-6-1/8 10 30 103.0 70 18 7.5 17 40
L1 8 6 4.4 1/4 J663PK8-6-1/4 14 30 106.5 70 18 11.0 17 46
8 6 4.4 3/8 J663PK8-6-3/8 17 30 108.0 70 18 11.5 17 58
Threads are treated with Parker Teflon® 10 6 4.4 1/4 J663PK10-6-1/4 14 33 116.4 70 18 11.0 21 60
Coating (PTC) sealing material 10 6 4.4 3/8 J663PK10-6-3/8 17 33 117.9 70 18 11.5 21 67
Equal union
1 Part number L O Weight
L
g.
8 HPK8 39.0 17 10
1 O 10 HPK10 48.0 21 15
12 HPK12 49.0 23 21
14 HPK14 54.0 25 30
Pneumatic 1.34
Unequal union
1 2 Part number L O Weight
L g.
8 4 HPK8-4 38.0 17 14
8 6 HPK8-6 39.0 17 12
1 2 O
10 6 HPK10-6 47.0 21 21
10 8 HPK10-8 47.0 21 19
12 10 HPK12-10 49.5 23 26
Equal union elbow

M 1 3 Part number M O Width Weight
dia. Q g.
O 8 4.2 EPK8 22.5 17 19.0 10

10 4.2 EPK10 28.5 21 23.5 17
M 12 4.2 EPK12 30.0 23 25.5 23
ø 3xQ 14 4.2 EPK14 33.5 25 27.5 31
Equal union tee

L
1 3 Part number L M O Width Weight
M M dia. Q g.
8 4.2 JPK8 45 22.5 17 19.0 14

O 1 10 4.2 JPK10 57 28.5 21 23.5 24
12 4.2 JPK12 60 30.0 23 25.5 33
M
ø 3xQ 14 4.2 JPK14 67 33.5 25 27.5 45
Unequal union tee

1 2 3 Part number L M O Width Weight
L dia. Q g.
6 4 4.2 JPK6-6-4 41 21.5 15 17.0 12

O 1 1 8 6 4.2 JPK8-8-6 45 22.5 17 19.0 18
10 8 4.2 JPK10-10-857 28.5 21 23.5 29
M 12 10 4.2 JPK12-12-10 60 30.0 23 25.5 38
ø 3xQ 4 6 4.2 JPK4-4-6 43 20.5 15 17.0 17
6 8 4.2 JPK6-6-8 45 22.5 17 19.0 18
8 10 4.2 JPK8-8-10 57 28.5 21 23.5 34
10 12 4.2 JPK10-10-12 61 30.5 23 25.5 43
Pneumatic 1.35
Union Y connector
L 1 3 Part number L L1 L2 Width U Weight
dia. Q g.
8 4.2 YJPK8 40 30 13.5 19 18.4 24

1 10 4.2 YJPK10 52 39 18.0 24 19.3 35
U 1 L2 L1
Ø3xQ
Unequal union Y connector

L 1 2 3 Part number L L1 L2 Width U Weight
dia. Q g.
6 8 4.2 YJPK6-6-8 40 30 13.5 19 17.0 32

1 8 10 4.2 YJPK8-8-10 40 31 13.6 19 18.4 43
U 2 L2 L1
1
Ø3xQ
Union double Y connector

L 1 2 3 Part number L L1 L2 Width U Weight
dia. Q g.
2 4 4 3.2 YJ5PK4 35 22.5 9.5 24.5 14.4 20

U 1 L2 L1 6 4 4.2 YJ5PK6-4 38 22.5 9.5 24.5 17.0 22
2
Ø3xQ
Multiple tee
L 1 2 3 Part number H L L1 N Width Weight
dia. Q g.
1 1
H 6 4 4.4 J5PK6-4 27 78 52 18 15 16
ø 3xQ
8 4 4.4 J5PK8-4 28 80 52 18 17 21
8 6 4.4 J5PK8-6 30 80 52 18 17 19
10 6 4.4 J5PK10-6 33 90 52 18 21 24
2 2 2
N N
L1
Multiple tee
L 1 2 3 Part number H L L1 N Width Weight
dia. Q g.
1 1
H 6 4 4.4 J6PK6-4 27 96 70 18 15 20
ø 3xQ 8 4 4.4 J6PK8-4 28 98 70 18 17 25
8 6 4.4 J6PK8-6 30 98 70 18 17 24
10 6 4.4 J6PK10-6 33 108 70 18 21 28
2 2 2 2
N N N
L1
Pneumatic 1.36
Tube end reducer
1 2 Part number L Weight
g.
4 6 TR2PK6-4 38 4
L 4 8 TR2PK8-4 36 6
6 8 TR2PK8-6 39 4
4 10 TR2PK10-4 41 16
6 10 TR2PK10-6 43 3
1 2 8 10 TR2PK10-8 47 4
6 12 TR2PK12-6 36 3
8 12 TR2PK12-8 38 7
10 12 TR2PK12-10 48 4
8 14 TR2PK14-8 39 8
10 14 TR2PK14-10 42 5
12 14 TR2PK14-12 51 14
Plug
1 Part number G Weight
G g.
4 FNPK4 34.5 1
6 FNPK6 35.0 1
1 8 FNPK8 35.0 2
10 FNPK10 42.0 9
12 FNPK12 41.0 10
14 FNPK14 40.0 10
Double male union

1 Part number L Weight
g.
L
4 BPK4 38 1
6 BPK6 41 1
1 8 BPK8 41 1
10 BPK10 51 2
12 BPK12 54 2
14 BPK14 55 2
Pressure indicator
L 1 Part number L Weight

g.
4 TS2PK4 36 5
1 6 TS2PK6 37 6
8 TS2PK8 36 8

M 1 2 Part number H H1 H2 M O Weight
g.
O 2 8 8 T2ESPK8 38 11.0 22 25.0 17 8

H1
H
H2
Pneumatic 1.37
Plug-in run tee
M N 1 2 3 Part number H M N O Width Weight

dia. Q g.
H
4 4 3.2 T2JJPK4 19.5 18.0 33.5 13 15 7

O 2 6 6 4.2 T2JJPK6 21.0 20.5 36.5 15 17 9
8 8 4.2 T2JJPK8 22.0 22.5 39.5 17 19 13
M
ø 3xQ
Plug-in branch tee

1 2 3 Part number H M N O Width Weight
M M
dia. Q g.
4 4 3.2 T2JPK4 19.5 18.0 33.5 13 15 7

O 1 6 6 4.2 T2JPK6 21.0 20.5 36.5 15 17 9
8 8 4.2 T2JPK8 22.0 22.5 39.5 17 19 13
ø 3xQ
N
Plug-in Y connector
L 1 3 Part number L L1 L2 L3 Width U Weight
L3 dia. Q g.
8 4.2 YJ2PK8 57.0 30 13.5 35 19 18.4 24
1
U 1 L2 L1
Ø3xQ
Plug-in double Y connector

1 2 3 Part number L L1 L2 M Width U Weight
L dia. Q g.
6 4 3.2 YJ52PK6-4 52 22.5 9.5 31 24.5 14.4 23

2
U 1 L2 L1
2
Ø3xQ
Pneumatic 1.38
90° adjustable bulkhead union elbow
M
1 3 B Part number C C4 L L1 M O Width W Weight
dia. Q Max. g.
4 3.2 M11x0.75 WE6PB4 14 16 37 18.0 18.0 11.5 15.0 6 22

1
6 4.2 M13x1 WE6PB6 17 17 39 19.5 20.5 13.5 17.0 6 38
8 4.2 M15x1.25 WE6PB8 19 19 43 21.5 22.5 15.5 19.0 6 52
ø 3xQ L1
10 4.2 M18x1 WE6PB10 22 22 54 29.0 28.5 18.5 23.5 8 107
C
L 12 4.2 M23x1.5 WE6PB12 27 27 59 30.0 30.0 23.5 25.5 10 139
W B
4 3.2 M11x0.75 WE6PK4 14 16 37 18.0 18.0 11.5 15.0 6 22
6 4.2 M13x1 WE6PK6 17 17 39 19.5 20.5 13.5 17.0 6 38
C4
8 4.2 M15x1.25 WE6PK8 19 19 43 21.5 22.5 15.5 19.0 6 52
10 4.2 M18x1 WE6PK10 22 22 54 29.0 28.5 18.5 23.5 8 107
12 4.2 M23x1.5 WE6PK12 27 27 59 30.0 30.0 23.5 25.5 10 139
O
Adjustable male bulkhead Y connector

L
1 B 3 Part number C C4 L L1 L2 M Width U W Weight
W M dia. Q Maxi g .
Ø3xQ 4 M11x0.75 3.2 WYJ6PK4 14 16 46 22 11.0 27 15 14.4 6 38

6 M13x1 4.2 WYJ6PK6 17 17 54 30 13.5 35 17 17.0 6 21
1
8 M15x1.25 4.2 WYJ6PK8 19 19 64 30 13.5 35 19 18.4 6 50
U 1 L2 L1
1
C4 C
B
Manifold for 2 tubes and pressure indicator

1 1 1 Part number L1 M X Weight
g.
4 HS3PK4 14 16 12 12
6 HS3PK6 15 18 14 15
8 HS3PK8 15 29 14 31
1 1
X L1
Manifold for 3 tubes
1 1 1 Part number L1 M X Weight

g.
4 J3PK4 14 16 12 10
6 J3PK6 15 18 14 12
8 J3PK8 15 29 16 35
1
1 1
X L1
Pneumatic 1.39
Prestolok - Dimensions
1 B Part number C4 J L H Weight
L Int. g.
8 1/8 F4PB8-1/8 19 9 25.0 4 41

8 1/4 F4PB8-1/4 19 9 27.5 4 29
8 3/8 F4PB8-3/8 22 9 27.5 4 59
1 B 10 1/4 F4PB10-1/4 19 9 35.5 6 50
10 3/8 F4PB10-3/8 22 9 30.5 8 39
10 3/8 F4PB10-1/2 27 12 29.0 8 60
C4
J 12 1/4 F4PB12-1/4 22 9 35.0 6 49
12 3/8 F4PB12-3/8 22 9 35.0 10 49
12 3/8 F4PB12-1/2 27 12 33.0 10 72
14 3/8 F4PB14-3/8 24 9 38.5 10 66
14 1/2 F4PB14-1/2 27 12 37.0 11 81
Female connector - BSPP

L 1 B Part number C4 J L Weight
g.
4 1/8 G4PB4-1/8 14 19.5 26.0 22

1 B
6 1/8 G4PB6-1/8 14 19.5 27.5 21
6 1/4 G4PB6-1/4 17 14.0 33.0 22
C4 8 1/8 G4PB8-1/8 17 19.5 29.0 44
J 8 1/4 G4PB8-1/4 17 14.0 33.0 29

1 A Part number L O P H. Weight
L Int. g.
P PTC 4 1/8 F23PB4-1/8 21 10 6.5 3 7
6 1/8 F23PB6-1/8 24 12 6.5 4 10
0 1 A 6 1/4 F23PB6-1/4 28 14 9.7 4 22
8 1/8 F23PB8-1/8 28 14 6.5 6 19
8 1/4 F23PB8-1/4 28 14 9.7 6 25
Coating (PTC) sealing material This fitting has been designed for use where space is at a premium. It is assembled using the internal hexagon
and an Allen key.

1 A Part number C4 L P H. Weight
L Int. g.
PTC
4 1/8 F3PB4-1/8 12 20.5 17.5 3 14
4 1/4 F3PB4-1/4 14 23.0 11.0 3 21
1 A 5 1/8 F3PB5-1/8 11 22.5 17.5 4 13
5 1/4 F3PB5-1/4 14 24.0 11.0 4 17
6 1/8 F3PB6-1/8 14 24.0 17.5 4 19
C4 6 1/4 F3PB6-1/4 14 24.0 11.0 4 22
P
8 1/8 F3PB8-1/8 17 28.0 17.5 4 31
8 1/4 F3PB8-1/4 17 28.5 11.0 4 31
8 3/8 F3PB8-3/8 17 26.5 11.5 6 28
10 1/4 F3PB10-1/4 19 35.5 11.0 6 45
10 3/8 F3PB10-3/8 19 33.0 11.5 8 48
10 1/2 F3PB10-1/2 22 31.0 15.0 8 47
12 1/4 F3PB12-1/4 22 36.5 11.0 6 68
12 3/8 F3PB12-3/8 22 36.0 11.5 10 48
12 1/2 F3PB12-1/2 22 36.0 15.0 10 56
14 3/8 F3PB14-3/8 24 39.0 11.5 10 91
14 1/2 F3PB14-1/2 24 37.0 15.0 11 83
Pneumatic 1.40
M 1 B Part number C C4 J M N Weight
g.
1
4 M3x0.5 C68PB4M3 10 10 3.25 18 23.0 15
4 M5x0.8 C68PB4M5 10 10 5.00 18 24.5 16
C
N 6 M5x0.8 C68PB6M5 12 11 5.00 20 25.5 24
C4 J

1 B Part number C C4 J M N Weight
g.
M
4 1/8 C64PB4-1/8 10 14 6 18 26.5 22
4 1/4 C64PB4-1/4 10 19 9 18 31.5 37
1 6 1/8 C64PB6-1/8 12 14 6 20 30.0 30
6 1/4 C64PB6-1/4 12 19 9 20 33.0 41
C 8 1/8 C64PB8-1/8 14 14 6 22 30.0 35
N 8 1/4 C64PB8-1/4 14 19 9 22 35.0 47
8 3/8 C64PB8-3/8 14 22 9 22 36.0 62
C4 10 1/4 C64PB10-1/4 17 19 9 28 39.0 66
J
10 3/8 C64PB10-3/8 17 22 9 28 40.0 82
12 1/4 C64PB12-1/4 22 19 9 30 41.0 106
B
12 3/8 C64PB12-3/8 22 22 9 30 42.0 110
14 3/8 C64PB14-3/8 25 22 9 34 46.0 158
14 1/2 C64PB14-1/2 25 27 12 34 50.5 188

1 B Part number øC C4 J M N Weight
g.
M
4 M5x0.8 C68SPK4M5 10 12.5 5 17 18 16
1
øC N
C4 J
Compact adjustable male elbow - BSPP
1 B Part number øC C4 J M N Weight

M g.
4 1/8 C64SPB4-1/8 11 13 6 18 18.5 19

6 1/8 C64SPB6-1/8 13 13 6 24 19.5 25
1
6 1/4 C64SPB6-1/4 13 16 9 24 23.0 30
8 1/8 C64SPB8-1/8 15 13 6 26 21.0 38
øC N 8 1/4 C64SPB8-1/4 15 16 9 26 24.0 43
C4 8 3/8 C64SPB8-3/8 15 19 9 26 24.0 48
J 10 1/4 C64SPB10-1/4 18 16 9 32 26.0 55
10 3/8 C64SPB10-3/8 18 19 9 32 26.0 60
B 12 1/4 C64SPB12-1/4 21 16 9 32 25.5 67
12 3/8 C64SPB12-3/8 21 19 9 32 25.5 75
12 1/2 C64SPB12-1/2 21 24 12 32 30.5 84
Pneumatic 1.41
Compact elbow - BSPT
1 A Part number C M N P Weight
M g.
4 1/8 C3PB4-1/8 14 18 21 17.5 23

1
6 1/8 C3PB6-1/8 14 20 21 17.5 24
6 1/4 C3PB6-1/4 14 20 21 11.0 25
C N 8 1/8 C3PB8-1/8 14 22 23 17.5 24
P 8 1/4 C3PB8-1/4 14 22 23 11.0 25
10 1/4 C3PB10-1/4 17 28 26 11.0 67
PTC 10 3/8 C3PB10-3/8 17 28 26 11.5 89
A 12 3/8 C3PB12-3/8 17 30 27 11.5 69
12 1/2 C3PB12-1/2 17 30 31 15.0 72
Threads are treated with Parker Teflon® 14 3/8 C3PB14-3/8 20 34 30 11.5 97
14 1/2 C3PB14-1/2 20 34 33 15.0 97
1 A Part number C C4 M N P Weight

M g.
4 1/8 C63PB4-1/8 10 10 18 26.5 17.5 19

1 4 1/4 C63PB4-1/4 10 14 18 30.0 11.0 27
6 1/8 C63PB6-1/8 12 11 20 28.0 17.5 25
6 1/4 C63PB6-1/4 12 14 20 31.0 11.0 35
C
N 8 1/8 C63PB8-1/8 14 14 22 30.0 17.5 33
8 1/4 C63PB8-1/4 14 14 22 33.0 11.0 40
C4 8 3/8 C63PB8-3/8 14 17 22 34.5 11.5 51
P
10 1/4 C63PB10-1/4 17 17 28 40.0 11.0 59
PTC 10 3/8 C63PB10-3/8 17 17 28 39.0 11.5 65
A 12 1/4 C63PB12-1/4 22 19 30 42.0 11.0 105
12 3/8 C63PB12-3/8 22 19 30 41.0 11.5 109
12 1/2 C63PB12-1/2 22 22 30 44.5 15.0 118
Threads are treated with Parker Teflon® 14 3/8 C63PB14-3/8 25 22 34 46.0 11.5 152
14 1/2 C63PB14-1/2 25 22 34 48.5 15.0 162

M 1 A Part number C C4 M N P Weight
g.
1
4 1/8 C63LPB4-1/8 10 10 18 42.0 17.5 28
C 4 1/4 C63LPB4-1/4 10 14 18 46.0 11.0 52
6 1/8 C63LPB6-1/8 12 11 20 45.5 17.5 40
6 1/4 C63LPB6-1/4 12 14 20 49.5 11.0 60
N
8 1/8 C63LPB8-1/8 14 14 22 50.0 17.5 59
8 1/4 C63LPB8-1/4 14 14 22 52.5 11.0 64
C4
P
PTC
A
Pneumatic 1.42
L 1 B Part number C C4 J L M N Weight

g.
N
J 4 1/8 R64PB4-1/8 10 14 6 44.5 18 26.5 26
4 1/4 R64PB4-1/4 10 19 9 49.5 18 31.5 41
6 1/8 R64PB6-1/8 12 14 6 50.0 20 30.0 33
B 6 1/4 R64PB6-1/4 12 19 9 53.0 20 33.0 44
8 1/8 R64PB8-1/8 14 14 6 52.0 22 30.0 42
8 1/4 R64PB8-1/4 14 19 9 57.0 22 35.0 54
M
C4 8 3/8 R64PB8-3/8 14 22 9 58.0 22 36.0 69
C 10 1/4 R64PB10-1/4 17 19 9 67.0 28 39.0 85
10 3/8 R64PB10-3/8 17 22 9 68.0 28 40.0 101
12 1/4 R64PB12-1/4 22 19 9 71.0 30 41.0 133
12 3/8 R64PB12-3/8 22 22 9 72.0 30 42.0 136
1
14 3/8 R64PB14-3/8 25 22 9 80.0 34 46.0 203
14 1/2 R64PB14-1/2 25 27 12 84.5 34 50.5 232

L 1 B Part number C C4 J L M N Weight
N g.
J
4 M5x0.8 R68PB4M5 10 10 5.00 42.5 18 24.5 20
B 6 M5x0.8 R68PB6M5 12 11 5.00 45.5 20 25.5 27
M C4
C

L
1 B Part number C C4 J L M N Weight
M
g.
1 4 M5x0.8 S68PB4M5 10 10 5.00 36 18 24.5 20
6 M5x0.8 S68PB6M5 12 11 5.00 40 20 25.5 27
N C
J C4

1 B Part number C C4 J L M N Weight
g.
L
M
4 1/8 S64PB4-1/8 10 14 6 36 18 26.5 26
4 1/4 S64PB4-1/4 10 19 9 36 18 31.5 41
6 1/8 S64PB6-1/8 12 14 6 40 20 30.0 33
1 6 1/4 S64PB6-1/4 12 19 9 40 20 33.0 44
8 1/8 S64PB8-1/8 14 14 6 44 22 30.0 42
N
C 8 1/4 S64PB8-1/4 14 19 9 44 22 35.0 54
8 3/8 S64PB8-3/8 14 22 9 44 22 36.0 69
J C4 10 1/4 S64PB10-1/4 17 19 9 56 28 39.0 85
10 3/8 S64PB10-3/8 17 22 9 56 28 40.0 101
B 12 1/4 S64PB12-1/4 22 19 9 60 30 41.0 133
12 3/8 S64PB12-3/8 22 22 9 60 30 42.0 136
14 3/8 S64PB14-3/8 25 22 9 68 34 46.0 203
14 1/2 S64PB14-1/2 25 27 12 68 34 50.5 232
Pneumatic 1.43
L 1 A Part number C C4 L M N P Weight

N g.
P
PTC 4 1/8 R63PB4-1/8 10 10 44.5 18 26.5 1 7.5 23
4 1/4 R63PB4-1/4 10 14 48.0 18 30.0 11.0 31
A 6 1/8 R63PB6-1/8 12 11 48.0 20 28.0 1 7.5 28
6 1/4 R63PB6-1/4 12 14 51.0 20 31.0 11.0 38
M 8 1/8 R63PB8-1/8 14 14 52.0 22 30.0 1 7.5 40
C4
C
8 1/4 R63PB8-1/4 14 14 55.0 22 33.0 11.0 46
8 3/8 R63PB8-3/8 14 17 56.5 22 34.5 11.5 58
10 1/4 R63PB10-1/4 17 17 68.0 28 40.0 11.0 77
10 3/8 R63PB10-3/8 17 17 67.0 28 39.0 11.5 84
12 1/4 R63PB12-1/4 22 19 72.0 30 42.0 11.0 132
1
12 3/8 R63PB12-3/8 22 19 71.0 30 41.0 11.5 135
12 1/2 R63PB12-1/2 22 22 74.5 30 44.5 15.0 144
14 3/8 R63PB14-3/8 25 22 80.0 34 46.0 11.5 197
14 1/2 R63PB14-1/2 25 22 82.5 34 48.5 15.0 207

L 1 A Part number C C4 L M N P Weight
M g.
4 1/8 S63PB4-1/8 10 10 36 18 26.5 17.5 23

1 4 1/4 S63PB4-1/4 10 14 36 18 30.0 11.0 31
6 1/8 S63PB6-1/8 12 11 40 20 28.0 17.5 28
6 1/4 S63PB6-1/4 12 14 40 20 31.0 11.0 38
C N 8 1/8 S63PB8-1/8 14 14 44 22 30.0 17.5 40
8 1/4 S63PB8-1/4 14 14 44 22 33.0 11.0 46
C4
P 8 3/8 S63PB8-3/8 14 17 44 22 34.5 11.5 58
10 1/4 S63PB10-1/4 17 17 56 28 40.0 11.0 77
PTC 10 3/8 S63PB10-3/8 17 17 56 28 39.0 11.5 84
A 12 1/4 S63PB12-1/4 22 19 60 30 42.0 11.0 132
Threads are treated with Parker Teflon ® 12 3/8 S63PB12-3/8 22 19 60 30 41.0 11.5 135
Coating (PTC) sealing material 12 1/2 S63PB12-1/2 22 22 60 30 44.5 15.0 144
14 3/8 S63PB14-3/8 25 22 68 34 46.0 11.5 197
14 1/2 S63PB14-1/2 25 22 68 34 48.5 15.0 207
Equal union
1 Part number Circlips* L O Weight
g.
4 HPB4 CIR4 33.0 10 11

O 1
5 HPB5 CIR5 34.5 11 15
6 HPB6 CIR6 36.0 12 13
8 HPB8 CIR8 38.0 14 16
L 10 HPB10 CIR10 48.0 17 27
12 HPB12 CIR12 48.0 21 58
14 HPB14 CIR14 54.0 22 71
* Unions can be used as bulkhead unions. Simply mount two circlips in
the machined grooves provided. Three grooves are provided to allow
for a range of wall thickness : 1.5, 2 and 5 mm.
Equal union elbow

M
1 Part number C M Weight
g.
1
4 EPB4 10 18.0 12
6 EPB6 12 20.0 19
C M
8 EPB8 14 22.0 22
10 EPB10 17 28.0 38
12 EPB12 22 30.0 73
14 EPB14 25 34.0 116
Pneumatic 1.44
Equal union tee
L
1 Part number C L M Weight
M
g.
1 4 JPB4 10 36 18.0 16
5 JPB5 12 41 20.5 28
M 6 JPB6 12 40 20.0 22
C 8 JPB8 14 44 22.0 29
10 JPB10 17 56 28.0 57
12 JPB12 22 60 30.0 100
14 JPB14 25 68 34.0 160
Tube end expander
1 2 Part number L L1 Weight

L g.
L1 4 6 TEPB4-6 39 19 7
2 1
Tube end reducer

1 2 Part number L L1 Weight
g.
6 4 TRPB6-4 40.0 22 8
L 8 4 TRPB8-4 39.5 22 10
8 6 TRPB8-6 41.5 22 10
L1 10 4 TRPB10-4 37.0 27 27
10 6 TRPB10-6 43.0 27 15
10 8 TRPB10-8 47.5 27 16
2 1 12 6 TRPB12-6 38.0 27 23
12 8 TRPB12-8 44.0 27 17
12 10 TRPB12-10 52.0 27 20
14 8 TRPB14-8 41.0 30 31
14 10 TRPB14-10 51.0 30 23
14 12 TRPB14-12 55.0 30 36
Plug
1 Part number L Weight
g.
L
4 FNPB4 27 2
6 FNPB6 27 5
1 8 FNPB8 30 12
10 FNPB10 30 23
12 FNPB12 35 35
14 FNPB14 36 46
Pneumatic 1.45
L 1 B Part number C4 L O W Weight
Max. g.
W
4 M11x0.75 WPB4 16 33 11.5 6 18
6 M13x1 WPB6 19 35 13.5 6 22
1 O 8 M16x1.25 WPB8 22 36 16.5 6 27
10 M18x1 WPB10 22 43 18.5 8 55
B 12 M23x1.5 WPB12 27 46 23.5 10 109
C4 C4 14 M24x1.5 WPB14 30 52 24.5 10 119
90O adjustable bulkhead union elbow

1 B Part number C C4 L L1 M O W Weight
M
Max. g.
1
4 M11x0.75 WE6PB4 14 16 37 18.0 18.0 11.5 6 28
6 M13x1 WE6PB6 17 17 39 19.5 20.5 13.5 6 50
L1
C
8 M16x1.25 WE6PB8 19 19 43 21.5 22.5 15.5 6 65
10 M18x1 WE6PB10 22 22 54 29.0 28.5 18.5 8 128
W L
B 12 M23x1.5 WE6PB12 27 27 59 30.0 30.0 23.5 10 189
C4
Single banjo - assembled

L 1 B Part number C D J K L M N O Y Weight
M C g.
4 M5x0.8 COR8PB4M5 8 8.2 4.5 1.0 24.0 19.0 13.5 6.0 10 18

N 4 1/8 COR4PB4-1/8 14 14.4 6.0 1.5 29.5 22.5 19.5 8.5 14 31
1
O 6 1/8 COR4PB6-1/8 14 14.4 6.0 1.5 30.0 23.0 19.5 8.5 14 32
K
6 1/4 COR4PB6-1/4 17 18.4 9.0 2.0 33.0 24.5 21.0 9.0 17 48
Y J
8 1/8 COR4PB8-1/8 14 14.4 6.0 1.5 31.0 34.0 19.5 8.5 14 58
8 1/4 COR4PB8-1/4 17 18.4 9.0 2.0 34.0 25.5 21.0 9.0 17 86
B
10 3/8 COR4PB10-3/8 22 21.6 9.0 2.5 43.0 32.0 25.5 11.0 22 122
D
These parts are delivered complete with sealing washer.
Double banjo - assembled

L
1 B Part number C D J K L M N O Y Weight
M
C g.
4 M5x0.8 COR8PB4DM5 8 8.2 4.5 1.0 38 19.0 13.5 6.0 10 23

1 N
4 1/8 COR4PB4D1/8 14 14.4 6.0 1.5 45 22.5 19.5 8.5 14 37
O
K 6 1/8 COR4PB6D1/8 14 14.4 6.0 1.5 46 23.0 19.5 8.5 14 38
Y J
6 1/4 COR4PB6D1/4 17 18.4 9.0 2.0 49 24.5 21.0 9.0 17 75
8 1/8 COR4PB8D1/8 14 14.4 6.0 1.5 48 24.0 19.5 8.5 14 76
B
D These parts are delivered complete with sealing washer.
Pneumatic 1.46
Single banjo body only
1 Part number Part No. Part No. M X Y Weight
M single bolt stacking bolt g.
4 CORPB4-5 SC8UM5-4 SC8UDM5-4 19.0 10 10 8

4 CORPB4-10 SC4U1/8-4 SC4UD1/8-4 22.5 14 14 16
1 X 6 CORPB6-10 SC4U1/8-4 SC4UD1/8-4 23.0 14 14 17
6 CORPB6-13 SC4U1/4-6 SC4UD1/4-6 24.5 14 17 21
8 CORPB8-10 SC4U1/8-4 SC4UD1/8-4 24.0 14 14 44
Y 8 CORPB8-13 SC4U1/4-6 SC4UD1/4-6 25.5 14 17 59
10 CORPB10-17 SC4U3/8-10 SC4UD3/8-10 32.0 17 22 127
Double banjo body only

L 1 Part number Part No. Part No. L M X Y Weight
M
single bolt stacking bolt g.
4 CORPB4D5 SC8UM5-4 SC8UDM5-4 38 19.0 10 10 13

4 CORPB4D10 SC4U1/8-4 SC4UD1/8-4 45 22.5 14 14 22
X 1 1
6 CORPB6D10 SC4U1/8-4 SC4UD1/8-4 46 23.0 14 14 23
6 CORPB6D13 SC4U1/4-6 SC4UD1/4-6 49 24.5 14 17 47
Y
8 CORPB8D10 SC4U1/8-4 SC4UD1/8-4 48 24.0 14 14 61
Single banjo bolt with seals

C
B Part number C D J K L Weight
g.
L M5x0.8 SC8UM5-4 8 8.2 4.5 1.0 18.5 10

1/8 SC4U1/8-4 14 14.4 6.0 1.5 25.5 15
K
J 1/4 SC4U1/4-6 17 18.4 9.0 2.0 30.0 27
3/8 SC4U3/8-10 22 21.6 9.0 2.5 34.5 124
B
D
Stacking banjo bolt with seals

B Part number C D J K L Weight
C
g.
M5x0.8 SC8UDM5-4 8 8.2 4.5 1.0 29.5 16

1/8 SC4UD1/8-4 14 14.4 6.0 1.5 41.0 19
L 1/4 SC4UD1/4-6 17 18.4 9.0 2.0 46.0 28
K
J
Pneumatic 1.47
Pneumatic 1.48
Cylinder Control
Pneumatic Accessories
Cylinder Control Accessories
Speed/flow controllers Blockers
PWR-A PWR-H PWR-B PWR-E PWR-L 33•• 3250 VQB••• PWB
Symbol
Body material:
Metal
Thermoplastic
Mounting:
On cylinder
In line
Panel
On valve
Adjustment:
By tool
By hand
Micrometer adjustment
Sizes
3/4 12 mm
1/2 10 mm
3/8 8 mm
1/4 6 mm
1/8 4 mm
M5
Refer to page 2.4 2.5 2.6 2.7 2.8 2.9 2.10-2.11 2.12-2.13 2.14-2.15
Pneumatic 2.2
Cylinder Control Accessories
Unloaders Shuttle valves Sensors Optim- Soft Non return valves

PWE PWS isers Start
PWR-HB PWE PWR-HE P4Q •••5 PWS PWP PWD 3047 VB••• PWA
&
8 mm
6 mm
4 mm
2.14-2.15 2.16-2.17 2.16-2.17 2.18 2.19 2.20-2.21 2.22 2.23 2.24 2.25 2.26
Pneumatic 2.3
Speed/Flow Control PWR-A
• For direct mounting on to cylinder

• Allen key adjustment with lock nut
• Threaded ports or push-in connection
• Wide range of sizes
Operating and additional information

Operating pressure: 1 to 10 bar
Permissible fluids: Air or neutral gas 50micron or filtration, lubricated or not
Flow: See table below
Operating temperature: -15OC to +60OC
Storage temperature: -40OC to +70OC
Vibration resistance: Conforming to section 19-2 of Bureau Veritas regulations
Maximum connecting torque: 1/8 = 8 Nm ; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35Nm
Body material: Zinc alloy
Connection thread: Brass
Adjustment mode: By allen key
Adjustment locking: By hexagonal lock nut
Main data for Speed Controls, PWR-A Series

Symbol Thread Port Number of Qmax input Weight Order code
thread turns at 6 bar, l/min* Kg
G1/8 4 10 350 0,06 PWR-A1448
G1/8 6 10 450 0,06 PWR-A1468
G1/8 8 14 650 0,10 PWR-A1488
G1/4 6 14 750 0,10 PWR-A1469
G1/4 8 14 900 0,09 PWR-A1489
G1/4 10 14 1850 0,14 PWR-A1499
With push-in connection Allen key G3/8 8 14 1750 0,14 PWR-A1483
adjustment and locknut G3/8 10 14 2050 0,13 PWR-A1493
G1/8 12 20 2750 0,52 PWR-A1412
G1/8 14 20 2750 0,53 PWR-A1422
Symbol Thread Port Number of Qmax input Weight Order code

thread turns at 6 bar, l/min* Kg
G1/8 G1/8 10 450 0,07 PWR-A1888
G1/4 G1/4 14 900 0,11 PWR-A1889
G3/8 G3/8 14 1950 0,15 PWR-A1833
G1/2 G1/2 20 2750 0,55 PWR-A1822
With threaded connection Allen key * Screw closed
adjustment and locknut
Order code ØA B D H K L L2
4 4
ØA ØA
D PWR-A1448 17 18 14 45 17 32
H
H
PWR-A1468 17 18 14 45 17 32
K
PWR-A1888 17 18 14 45 17 36,5
D D
PWR-A1488 22 21 14 55 21 39
PWR-A1489 22 21 17 55 21 39
B
B
B/2 L2
PWR-A1469 22 21 17 55 21 39
B/2 L
PWR-A1899 22 21 17 55 21 43,5
PWR-A1499 27 28 17 60 26 50
PWR-A1483 27 28 24 60 26 50
PWR-A1493 27 28 24 60 26 50
PWR-A1833 27 28 24 60 26 55,5
PWR-A1412 31 33 27 77 35 66
PWR-A1422 31 33 27 77 35 66
PWR-A1822 31 33 27 77 35 63,0
Pneumatic 2.4
Speed/Flow Control PWR-H

• Manual barrel adjustment with lock nut
• Push-in connection

Maximum connecting torque: 1/8 = 8 Nm ; 1/4 = 12Nm; 3/8 = 30Nm
Body material: Thermo plastic
Adjustment mode: Rotating barrel
Adjustment locking: Knurled lock nut
Main data for Speed Controls, PWR-H Series

Symbol Thread Push-in Adjustment Qmax input Weight Order code
connection angle at 6 bar, l/min* Kg
G1/8 4 285 O 370 0,06 PWR-H1448
G1/8 6 285 O 660 0,06 PWR-H1468
G1/4 6 285 O 830 0,06 PWR-H1469
G1/4 8 285 O 1200 0,06 PWR-H1489
With push-in connection barrel G3/8 8 285 O 2000 0,12 PWR-H1483
adjustment and locknut G3/8 10 285 O 2000 0,12 PWR-H1493
* Screw closed
P
Order code ØA B D H K L P
PWR-H1448 22,5 21 19 35,0 20,7 47,0 12,7

H
PWR-H1468 22,5 21 19 35,0 20,7 47,0 12,7

D PWR-H1469 22,5 21 19 75,0 20,7 47,0 12,7
PWR-H1489 22,5 21 19 35,0 20,7 47,0 12,7
ØA
B
PWR-H1483 29,0 28 27 42,5 25,0 60,0 15,0

L
PWR-H1493 29,0 28 27 42,5 25,0 60,0 15,0
Pneumatic 2.5
Speed/Flow Control PWR-B
• For direct mounting on to valve

• For direct mounting on to single acting cylinders
• Adjustment by knob (PWR-E adjusted by screw driver)

Maximum connecting torque: M5 = 1Nm; 1/8 = 8 Nm ; 1/4 = 12Nm
Adjustment mode: Knurled knob
Adjustment locking: Hexagonal lock nut
Main data for Speed Controls, PWR-B Series

Thread Push-in Adjustment Qmax input Weight Order code
Symbol connection angle at 6 bar, l/min* Kg
M5** 4 12 50 0,02 PWR-E1145
G1/8 4 7 350 0,06 PWR-B1148
G1/8 6 7 620 0,06 PWR-B1168
G1/4 6 10 430 0,08 PWR-B1169
With push-in connection knob G1/4 8 10 510 0,08 PWR-B1189
** Flow rate adjustment carried out using a screw driver, no locknut - Body in plastic
* Screw closed
Order code ØA B H+ H- K L
ØA
H
PWR-E1145 11 8 17 17 7,2 21,0

K
PWR-B1148 14 18 46 40 10,0 25,0

PWR-B1168 14 18 46 40 10,0 25,0
PWR-B1169 16 21 49 42 11,0 28,5
B
PWR-B1189 16 21 49 42 11,0 28,5

B/2 L
Pneumatic 2.6
Speed/Flow Control PWR-E

• Allen key adjustment with friction locking
• Protective cap

Maximum connecting torque: M5 = 1Nm; 1/8 = 8 Nm ; 1/4 = 12Nm; 3/8 = 30Nm
Adjustment mode: Allen key
Adjustment locking: Friction cap
Main data for Speed Controls, PWR-E Series

Thread Push-in Number Qmax input Weight Order code
Symbol connection of turns at 6 bar, l/min* Kg
M5** 4 12 50 0,02 PWR-E1445
G1/8 4 14 290 0,04 PWR-E1448
G1/8 6 14 650 0,04 PWR-E1468
G1/4 6 18 650 0,05 PWR-E1469
G1/4 8 18 1200 0,05 PWR-E1489
With push-in connection Allen key
G3/8 8 18 1350 0,07 PWR-E1483
adjustment friction locking
G3/8 10 18 2100 0,08 PWR-E1493
* Screw closed
** Flow rate adjustment carried out using a screw driver.
Order code ØA C D E H K L
D
PWR-E1445 11 4,0 8 17 7,2 21
H
A
L C
* PWR-E1448 11 8,0 14 16,5 45 23,8 24

3 mm *(1)
**
4 mm (2) * PWR-E1468 11 8,0 14 16,5 45 23,8 24
E
** PWR-E1469 16 10,5 17 21,0 49,3 26,5 27
** PWR-E1489 16 10,5 17 21,0 49,3 26,5 27
A
** PWR-E1483 20 11,5 22 23,0 56,8 29,8 33

H
K
D
** PWR-E1493 20 11,5 22 23,0 56,8 29,8 33
L C
Pneumatic 2.7
Speed/Flow Control PWR-L
• For inline or surface mounting

• Manual adjustment by knob with lock nut
• Instant push-in fitting
• High flow

Adjustment locking: Hexagonal lock nut
Main data for Speed Controls, PWR-L Series

Symbol Push-in Adjustment Qmax input Weight Order code
connection angle at 6 bar, l/min* Kg
4 13 200 0,02 PWR-L1444
6 12 400 0,04 PWR-L1466
8 15 720 0,06 PWR-L1488
10 18 1360 0,13 PWR-L1499
With push-in connection knob 12 20 1950 0,15 PWR-L1411
* Screw closed
F1 Type B F F1 e H+ H- H1 L Q
L
F
e
PWR-L1444 12,0 14 * 6 25,5 21,5 6,5 39,0 10,5

H
PWR-L1466 17,0 19 * 7 32,5 27,5 7,5 54,0 17,0

PWR-L1488 18,5 24 11 7 34,5 28,5 9,0 60,5 19,0
H1
B PWR-L1499 24,0 30 14 7 38,5 29,5 11,5 76,0 25,0

PWR-L1411 28,0 32 14 8 42,0 32,0 12,5 86,0 28,0
Pneumatic 2.8
Micrometer Flow Controls 33**
• Micrometer type adjustment

• Fine control
• Integral mounting hole
• Non-return and needle valves
For detailed information see technical leaflet 2140

Flow: See curve below
Body material: Brass
Control knob: Aluminium
Flow Control with By-pass

Thread Number Qmax input Weight Order code
Symbol of turns at 6 bar, l/min Kg
G1/8 5 300 0,076 337A

G1/4 6 780 0,134 337B
Flow Control with By-directional Control

Symbol of turns at 6 bar, l/min Kg
G1/8 5 300 0,078 338A

G1/4 6 780 0,132 338B
Micrometer Flow Control Valves - Dimensions

6 C
G1/4
5
1 0 9
D2
D1
G F
Number of turns
4 1
H
3
J B
E
2 G1/8
Order Port A B C D1 D2 E F G H J
1 code size open closed
337A G1/8 14,5 14,5 19 51 46 40 12 - - -
1 2 3 4 5 6 7 8 9 10 11 12 13
337B G1/4 17,5 18,0 19 58 51 50 12 4,8 19 10
Litres/s
338A G1/8 14,5 14,5 19 51 46 40 12 - - -
338B G1/4 17,5 18,0 19 58 51 50 12 4,8 19 10
Pneumatic 2.9
Heavy Duty Inline Flow Regulator 3250
• Screw driver or hand adjustment

• Rugged brass bodies
• Panel mounted versions
• High flow rate
• High flow by-pass

Operating pressure: 0 to 28 bar for air - 0 to 55 bar oil or water
Control knob: Brass
Adjustment mode: Knurled knob or screw driver adjustment
Standard Type
Symbol
of turns at 6 bar, l/min* Kg
G1/8 6 1320 0,114 B3250X

G1/4 5 2880 0,224 B3250AB
G3/8 5 6300 0,378 B3250BB
G1/2 5 7680 0,792 B3250CB
G3/4 4,5 10680 1,300 B3250DB
Panel Mounting Type

Symbol Thread Number Qmax input Weight Order code
G1/8 6 1320 0,120 B3250XP

G1/4 5 2880 0,226 B3250ABP
Panel Mounted Hand Adjustment Type

G1/8 6 1320 0,128 B3250HX

G1/4 5 2880 0,238 B3250HA
Pneumatic 2.10
Heavy Duty Inline Flow Regulator 3250
Dimensions, Flow Control Valves, B3250 Series

Flow Control Valves, Panel Mounted Hand Adjustment Type
Order code Port A B C D
C
size
D
B3250HX G1/8 44 57 21 20
B3250HA G1/4 57 70 32 25
B
Flow Control Valves, Standard Type

Order code Port A B C
C size
B3250X G1/8 44 40 21
B3250AB G1/4 57 51 28
B
B3250BB G3/8 68 64 35
B3250CB G1/2 79 78 41
B3250DB G3/4 90 92 51
A
Flow Control Valves, Panel Mounted Type

Order code Port A B C D
C size
D B3250XP G1/8 44 40 21 20
B3250ABP G1/4 57 51 32 25
B
Pneumatic 2.11
Speed Flow Control Valves VQB
• Integral mounting holes

• Screw driver adjustable
• Panel mounting option
• Roller for mechanical actuation available
For detailed information see technical leaflet 9127 0035-02
Working pressure Max 10 bar
Working temperature -20 °C to +70 °C
Flow Control Valves with By-pass

G1/8 13 72 0,03 VQB12-Q-0X-5*

G1/8 13 240 0,03 VQB12-Q-0-5
G1/4 13 1320 0,07 VQB22-Q-0-5
G1/2 13 3600 0,27 VQB42-Q-0-5
Flow Control Valves with By-directional Control

G1/8 13 72 0,03 VQB12-0X-5*
G1/8 13 240 0,03 VQB12-0-5
G1/4 13 1320 0,07 VQB22-0-5
G1/2 13 3600 0,26 VQB42-0-5
* Extra fine adjustment
Roller Operated, Flow Control Valves with By-pass

Symbol Thread Qmax input Weight Order code
. at 6 bar, l/min* Kg
G1/4 1320 0,11 VQB22-Q-0WG-5
G1/2 3600 0,27 VQB42-Q-0WG-5
knob and nut for Panel Mounting

To Suit Weight Order code
Kg
VQB12 0,008 9128 1772-12
VQB22 0,014 9128 1772-22
VQB42 0,037 9128 1772-42
Pneumatic 2.12
Speed Flow Control Valves VQB
Dimensions, Flow Control Valves, VQB Series
Flow Control Valves - Dimensions

Order A B C D E F G H I
code
I
K VQB12-Q-OX-5 49 42 22 15 6,5 G1/8 5,8 24 M12x1
VQB12-Q-O-5 49 42 22 15 6,5 G1/8 5,8 24 M12x1
VQB22-Q-O-5 64 53 30 21 8,5 G1/4 7,0 32 M16x1
VQB42-Q-O-5 99 85 50 36 16,5 G1/2 7,0 50 M24x1,5
O
P
T
A
B
Order K L M O P R S T
R
code
C
D
VQB12-Q-OX-5 1,2 32 15 - - - 13,5 8,8

F
S M
VQB12-Q-O-5 1,2 32 15 - - - 13,5 8,8
H
L
VQB22-Q-O-5 1,2 42 20 6,0 M4 7 16,0 10,0
VQB42-Q-O-5 1,8 62 30 19,5 M4 7 20,5 15,2
Roller operated, Flow Control Valves - Dimensions

Order A B C D E F G H
code
A
H J K VQB22-Q-OWG-5 64,5 42 20 68 55 30 21 18,5
VQB42-Q-OWG-5 64,5 62 30 88 75 50 36 5,0
Order J K L O S X
code
D
VQB22-Q-OWG-5 16 6 8,5 32 7 G1/4

E
X VQB42-Q-OWG-5 16 6 16,5 50 7 G1/2

F
S
G
O C
B
Pneumatic 2.13
Blocker and Blocker/Flow regulator PWB/PWR-HB
• For direct cylinder mounting

• Blocker only or multifunction options
• Threaded or push-in ports
• Blocker/Flow Regulator device adjustable
with manual barrel
Flow: See table opposite
No. of operations with dry air at 6 bar 20OC 1 Hz: 10 million
Maximum operating freqency: 10Hz
Maximum connecting torque: 1/8 = 8Nm ; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35Nm
Body material (Blocker): Zinc alloy
Body material (Blcoker/Flow Regulator): Thermo plastic
Adjustment mode (Blocker/Flow Regulator): Rotating barrel
Adjustment locking (Blocker/Flow Regulator): Knurled lock nut
With Push-in Connection

Symbol Connection Thread Connection for Qmax input Weight Order
for pilot port tube ,Ømm at 6 bar, l/min* kg code
Push-in Ø4mm G1/8 6 500 0,15 PWB-A1468
G1/4 6 650 0,15 PWB-A1469
G1/4 8 650 0,15 PWB-A1489
G3/8 8 1300 0,18 PWB-A1483
G3/8 10 1300 0,18 PWB-A1493
G1/2 12 2300 0,50 PWB-A1412
With Threaded Connection

Push-in Ø4mm G1/8 G1/4 500 0,18 PWB-A1898
G1/4 G1/4 650 0,18 PWB-A1899
M5* G3/8 G3/8 1300 0,19 PWB-A1833
G1/2 G1/2 2300 0,48 PWB-A1822
* Available with Ø4mm push-in connection, add4 to the end of the Order code; example: PWB-A18994
With Push-in Connection, Barrel Adjustment and Locknut

Ø4mm G1/8 4 330 0,13 PWR-HB1448
G1/8 6 410 0,13 PWR-HB1468
G1/4 6 420 0,13 PWR-HB1469
G1/4 8 420 0,13 PWR-HB1489
G3/8 8 1150 0,18 PWR-HB1483
G3/8 10 1150 0,18 PWR-HB1493
Pneumatic 2.14
Blocker and Blocker/Flow regulator PWB/PWR-HB
Blockers Pilot Depilot

operating pressure operating pressure
2bar 4bar 6bar 8bar 2bar 4bar 6bar 8barr
PWB-A1898 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4
PWB-A1899 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4
PWB-A1833 2,45 2,75 3,05 3,4 1,4 1,7 2,,0 2,35
PWB-A1822 3,05 3,4 3,7 4,05 1,75 2,1 2,4 2,8
Combined speed Pilot Depilot

controllers
& blockers operating pressure operating pressure
2bar 4bar 6bar 8bar 2bar 4bar 6bar 8barr

PWR-HB1448 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4
PWR-HB1468 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4
PWR-HB1469 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4
PWR-HB1489 2,3 2,7 3,05 3,4 1,5 1,8 2,15 2,4
PWR-HB1483 2,45 2,75 3,05 3,4 1,4 1,7 2,0 2,35
PWR-HB1493 2,45 2,75 3,05 3,4 1,4 1,7 2,0 2,35
Blocker with push-in connection - dimensions

D
Order ØA B D H K L
ØA
code
H
PWB-A1468 22 21 24 59 19,5 39
PWB-A1469 22 21 24 53 13,5 39
K
PWB-A1489 22 21 24 53 13,5 39
PWB-A1483 27 28 24 53 14,0 50
PWB-A1493 27 28 24 53 14,0 50
PWB-A1412 31 33 30 66 24,0 66
B
Blocker with threaded connection - dimenesions

Order ØA B D H K L
D code
ØA D
PWB-A1898 22 21 24 59 19,5 43,5
H
PWB-A1899 22 21 24 53 13,5 43,5

K
PWB-A1833 27 28 24 53 14,0 55,5

PWB-A1822 31 33 30 66 24,0 63,0
B
Blocker/Flow regulator - dimensions

Order ØA B D H K L P
code
H
PWR-HB1448 22,5 21 24 59 19,5 47,0 12,5

PWR-HB1468 22,5 21 24 59 19,5 47,0 12,5
K
PWR-HB1469 22,5 21 24 53 13,5 47,0 12,5

P PWR-HB1489 22,5 21 24 53 13,5 47,5 12,5
PWR-HB1483 29,0 28 24 53 15,5 60,0 15,0
PWR-HB1493 29,0 28 24 53 15,5 60,0 15,0
ØA
B
L
D
Pneumatic 2.15
Unloader and Unloader/Flow Regulator PWE/PWR-HE
• For direct cylinder mounting

• Unloader only or multifunction options
• Unloader/Flow Regulator device adjustable with
manual barrel
Maximum operating freqency: 1Hz
Maximum connecting torque: 1/8 = 8Nm ; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35Nm
Body material (Unloader): Zinc alloy
Body material (Unloader/Flow Regulator): Thermo plastic
Adjustment mode (Unloader/Flow Regulator): Rotating barrel
Adjustment locking (Unloader/Flow Regulator): Knurled lock nut
Unloader with Push-in Connection

Push-in Ø4mm G1/8 6 1450 0,13 PWE-A1468
G1/4 8 2800 0,15 PWE-A1489
G3/8 10 3950 0,18 PWE-A1493
G1/2 12 4750 0,50 PWE-A1412
Unloader with Threaded Connection

Push-in Ø4mm G1/8 G1/4 1450 0,13 PWE-A1898
G1/4 G1/4 2800 0,16 PWE-A1899
G3/8 G3/8 3950 0,19 PWE-A1833
G1/2 G1/2 4750 0,48 PWE-A1822
Combined Unloader/Flow Control with Push-in Connection

Push-in Ø4mm G1/8 4 1450 0,10 PWR-HE1448
G1/8 6 1450 0,10 PWR-HE1468
G1/4 6 2800 0,10 PWR-HE1469
G1/4 8 2800 0,10 PWR-HE1489
Barrel adjustment and locknut
G3/8 8 3950 0,18 PWR-HE1483
G3/8 10 3950 0,18 PWR-HE1493
Pneumatic 2.16
Unloader and Unloader/Flow Regulator PWE/PWR-HE
Unloaders Pilot Depilot

operating pressure operating pressure
3bar 6bar 8bar 3bar 6bar 8barr
PWE-A1468/1898 1,75 3,35 4,5 0,95 2,05 2,75
PWE-A1489/1899 2,35 4,3 5,9 0,95 2,05 2,75
PWE-A1493/1833 2,0 4,1 4,8 0,90 2,0 3,0
PWE-A1412/1822 1,4 3,35 5,0 0,90 2,2 3,5
Combined Pilot Depilot

speed controllers
& unloaders operating pressure operating pressure
3bar 6bar 8bar 3bar 6bar 8barr
PWR-HE1448 1,75 3,35 4,5 0,95 2,05 2,75
PWR-HE1468 1,75 3,35 4,5 0,95 2,05 2,75
PWR-HE1469 2,35 4,3 5,9 0,95 2,05 2,75
PWR-HE1489 2,35 4,3 5,9 0,95 2,05 2,75
PWR-HE1483 2,0 4,1 4,8 0,90 2,0 3,0
PWR-HE1493 2,0 4,1 4,8 0,90 2,0 3,0
Unloaders - Dimensions
D Push-in Connection
ØA
H
Order ØA B D H K L
code
K
PWE-A1468 22 21 24 54 13 39
PWE-A1489 22 21 24 54 13 39
B
PWE-A1493 27 28 24 62 16 50
L
PWE-A1412 31 33 30 73 24 66
D Threaded Connection
ØA
D
H
Order ØA B D H K L2
code
K
PWE-A1898 22 21 24 54 13 43
PWE-A1899 22 21 24 54 13 43
B
PWE-A1833 27 28 24 62 16 55
L2
PWE-A1822 31 33 30 73 24 63
Unloaders/Flow Regulators - Dimensions

Order ØA B D H K L P
code
H
PWR-HE1448 22,5 21 24 59 19,5 47,0 12,5

PWR-HE1468 22,5 21 24 59 19,5 47,0 12,5
K
PWR-HE1469 22,5 21 24 53 13,5 47,0 12,5

P PWR-HE1489 22,5 21 24 53 13,5 47,5 12,5
PWR-HE1483 29,0 28 24 53 15,5 60,0 15,0
PWR-HE1493 29,0 28 24 53 15,5 60,0 15,0
ØA
B
L
D
Pneumatic 2.17
Quick exhaust valves P4Q
• Increases piston speeds, super sensitive diaphragm

• Extremely low operating differential
• Virtually stiction free
• May be used as differential shuttle valve
• High temperature option
Operating pressure: 0,2 to 10 bar
Operating temperature (Standard): -10OC to +80OC
Operating temperature (High): -10OC to +180OC
Body material: Aluminium
Diaphragm material (Standard): Nitrile
Diaphragm material (High): Viton
Standard version
Port Cv Weight Order
Symbol Size Rating kg Code
G1/4 2,3 0,20 P4Q-BA12
G3/8 3,6 0,18 P4Q-BA13
G1/2 6,6 0,50 P4Q-CA14
G3/4 7,3 0,44 P4Q-CA16
High temperature version

Port Cv Weight Order
Size Rating kg Code
G1/4 2,3 0,20 P4Q-BV12
G3/8 3,6 0,18 P4Q-BV13
G1/2 6,6 0,50 P4Q-CV14
G3/4 7,3 0,44 P4Q-CV16
Quick Exhaust Valves - Dimensions
C Order Port A B C
code Size
P4Q-B*12 G1/4 52 25 62
P4Q-B*13 G3/8 52 25 62
A
P4Q-B*14 G1/2 73 38 86
P4Q-B*16 G3/4 73 38 86
B
Pneumatic 2.18
Shuttle Valves
• Allows two separate signals to be applied to the air pilot

• 0,6 bar differential, Viton seals as standard
Body material M5 and G1/8: Aluminium
Body material G1/4 Zinc
Shuttle ball material: Plastic
Symbol Port Qmax input Weight Order

Size at 6 bar, l/min* kg Code
M5 36 0,040 M33005
G1/8 509 0,100 B43005B
G1/4 1076 0,172 B53005A
Shuttle Valves - Dimensions

Order Port A B C D E F G H
A C code Size
M33005 M5 27,5 24 15 16,0 15 6 6,3 3,2
M43005B G1/8 44,0 24 15 16,0 25 6 9,5 4,5
B
B53005A G1/4 52,0 30 22 20,5 35 10 8,5 5,5

P
G E
¯H
Pneumatic 2.19
Back Pressure Sensor - Modular PWS
• Detects stoppage of a cylinder due to a pressure

drop in the exhaust chamber
• For direct mounting to cylinders
• Choice of pneumatic, electrical or electronic output
Maximum operating frequency: 10 Hz
Output characteristics: Pneumatic: Flow @ 6 bar 90l/m
Electrical: C/contact 2,5A/250V AC, 5W 48V DC
Electronic: PNP N/C or N/O 10 to 30V 75 mA DC
Maximum connecting torque: M5 = 1Nm; 1/8 = 8Nm; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35Nm
Body material: Thermo plastic Dimensions and piloting
pressures opposite page
Assembly Connection
All back pressure sensors are a combination of two distinct parts:
Output signal connection
a banjo socket + a plug-in sensor.
BK
BU
Banjo socket BN
Allen screw
Pneumatic output sensor: Ø4 mm push-in
Plug-in sensor
Brown
Electric output sensor -
(BN)
C1 load -3 BU
Blue
Black (BU)
Brown (BK) 2BK
Black (BN) Solid state output sensor
Locking (BK) Blue
clip Ø4 mm push-in (BU) + +1 BN
connection
Banjo Sockets
Thread Size for Female Tool Required Weight Order code
Cylinder Port Thread Kg
M5 M5 8mm flat spanner 0,04 PWS-B155
G1/8 G1/8 5mm Allen key 0,04 PWS-B188
Plug-in Sensors
Sensing Output Output Output Weight Order
function function Connection characteristics kg code
Exhaust back Pneumatic Push-in NO valve flow rate 0,09 PWS-P111
pressure decay Ø4mm at 6 bar 1,5 l/s
Electrical 3 wires CO contact 0,08 PWS-M1012
~Ve = 3A 0,5mm2 12 to 230V ~ / 10VA*
length 2m 12 to 48 VDC/5W*
Solid state 3 wires PNP type NC 0,07 PWS-E101
0,1mm2 10/30VDC**
length 2m 75 mA, NO 0,07 PWS-E111
* Suitable for low currents : 250 V ~ / 4 mA ; 24 VDC / 10 mA ** Including ripple
Pneumatic 2.20
Back Pressure Sensor - Mono block PWS
• Detects stoppage of a cylinder due to a pressure

drop in the exhaust chamber
• Single unit design
• For direct mounting to cylinders
• Pneumatic output
Output characteristics: Flow @ 6 bar 90l/m
Maximum connecting torque: M5 = 1Nm; 1/8 = 8Nm; 1/4 = 12Nm; 3/8 = 30Nm; 1/2 = 35Nm
Body material: Zinc alloy / Thermo plastic
Back Pressure Sensor for Cylinder Mounting

Thread Thread Bore Weight Order code
Symbol Cylinder Port Supply Port Ømm Kg
M5 M5 2 0,10 PWS-C5145
& G1/8 G1/8 5 0,11 PWS-C5148
G1/4 G1/4 7 0,10 PWS-C5149
G3/8 G3/8 10 0,17 PWS-C5143
G1/2 G1/2 14 0,15 PWS-C5142
Back Pressure Sensors - Mono block - Dimensions

ØA Order ØA B H L
code
H
PWS-CS145 19 11,0 16,0 42

PWS-CS148 22 16,5 29,0 40
PWS-CS149 22 23,5 26,0 43
B
Ø4 PWS-CS143 22 23,5 36,5 43

B/2 L
PWS-CS142 22 32,0 29,5 48
Plug-in & Monoblock Pilot Depilot

back pressure sensors operating pressure operating pressure
6bar 6bar
PWS-P111 4,4 0,4
PWS-M1012 1,0 0,6
PWS-E101 & E111 0,7 0,5
PWS-C 1,6 ±0,2 0,3
Back Pressure Sensors - Modular - Dimensions

Ø16 18 X 14 Order C B H K L
18,5
code
H
C 32 2m 32 2m
PWS-B155 8 11 16,5 10 17
PWS-B188 5 16 20,0 10 20
24,5
PWS-B199 8 21 20,0 10 22
B
20
PWS-B133 10 28 22,0 12 25
B/2 L 22
PWS-B122 12 33 26,0 14 26
Pneumatic 2.21
Optimisers PWP
• Adjusts the actuating force developed by a cylinder

• For direct mounting to power valve
• Adjustment by allen key or knurled knob
Maximum connecting torque: 1/8 = 8Nm ; 1/4 = 12Nm; 3/8 = 30Nm

Symbol Thread size for Push-in Qmax input Weight Order
cylinder port Connection, Ømm at 6 bar, l/min* kg code
G1/8 6 570 0,30 PWP-B1268
G1/4 6 530 0,30 PWP-B1269
G1/4 8 870 0,30 PWP-B1289
G1/4 10 1400 0,54 PWP-B1299
With setting indicator* G3/8 10 1530 0,55 PWP-B1293
* Adjustment is carried out using a 6mm Allen key or a knurled knob.
With Threaded Connection

Symbol Thread size for Push-in Qmax input Weight Order
cylinder port Connection, Ømm at 6 bar, l/min* kg code
G1/8 G1/8 570 0,34 PWP-B1888
G1/4 G1/4 870 0,34 PWP-B1899
G3/8 G3/8 3200 0,62 PWP-B1833
With setting indicator* * Adjustment is carried out using a 6mm Allen key or a knurled knob.
Weight kg Order code

Clip-in knurled adjustment knob for optimisers
0,03 PWP-Z13
Dimensions
6 6 D
D
Order ØA B D H K L L2
ØA ØA
code
D
H
H
PWP-B1268 22 21 19 58,0 13,5 39

K
PWP-B1269 22 21 19 58,0 13,5 39

PWP-B1289 22 21 19 58,0 13,5 39
PWP-B1299 27 28 19 65,5 16,5 50
B
PWP-B1293 27 28 27 65,5 16,5 50

B/2 L B/2 L2 PWP-B1888 22 21 19 58,0 13,5 43
PWP-B1899 22 21 19 58,0 13,5 43
PWP-B1833 27 28 27 65,5 16,5 55
Pneumatic 2.22
Soft Start PWD
• Enables a gradual increase in pressure

• For direct mounting to power valve
• Instant push-in connections
• Adjustment by allen key
No. of operations with dry air at 6 bar 20OC 1 Hz: 1/4 : 10 million; 3/8 : 5 million
Maximum connecting torque: 1/4 = 12Nm; 3/8 = 30Nm

Symbol Thread Push-in Flow rate at Weight Order
Connection, Ømm 6 bar, l/min kg code
G1/4 8 1500 0,07 PWD-P2489
G1/4 8 2000 0,12 PWD-P2499
G3/8 10 2000 0,13 PWD-P2493
Dimensions
D Order ØA B ØC D H K L
ØA code maxi
H
PWD-P2489 15,0 20 G1/4 17 61 8,5 27,5

PWD-P2499 19,5 25 G1/4 22 62 11,8 41,0
K
B
C
PWD-P2493 19,5 25 G3/8 22 62 11,8 41,0
B/2 L
Operation Adjustment Mounting

A Soft starter provides a progressive increase in Allen key adjustment of flow rate These compact devices with push-in
pressure, in a section of a pneumatic system. for slow pressure increase. tube connection are fitted to the N°1
When pressure reaches half the supply pressure, port of the power valve.
full pressure is applied automatically. Allen key
Supply
Flat spanner
pressure
P
Supply Soft Starter
~ 0,5 P
pressure
ter
Star
Soft
With
Operating pressure
Adjustable T Time
Pneumatic 2.23
Non return valve - Male thread 3047
• Rugged brass body design

• Standard or high temperature options
• Low 0,1 bar operating pressure
• Full flow in one direction only
• Compact design
Flow: Qmax at 6 bar, l/min* 1/8 = 1200L/m; 1/4 - 1350 L/m
Operating temperature: Standard: -26OC to +85OC
High: -26OC to +230OC
Seal material Standard: Nitrile
High: Viton
Standard version
Symbol Thread size Weight Order
kg code
G1/8 0,68 3047X
G1/4 0,72 3047B
High temperature version

Symbol Thread size Weight Order
kg code
G1/8 0,68 3047XV
G1/4 0,72 3047BV
Dimensions
Order Port A B
A B
code Size
3047X/XV G1/8 51 21
3047B/BV G1/4 49 21
Pneumatic 2.24
Non return valve - Female VB
• Aluminium bodies
• Long life
• Low opening pressure
Body material: Anodised aluminium
Seal material Nitrile
VB - Aluminium
Symbol Port size Weight Order
kg code
G1/8 0,01 VB12-Q-NQ-5
G1/4 0,01 VB22-Q-NQ-5
G1/2 0,05 VB42-Q-NQ-5
Dimensions
Order F L N
code
VB12-Q-NQ-5 G1/8 31 14
N
VQB22-Q-NQ-5 G1/4 40 17
F
VB42-Q-NQ-5 G1/2 59 27
L
Pneumatic 2.25
Non Return Valve - Push-in PWA
• Low 0,1 bar operating pressure

• Compact design
• Instant push-in connections
Flow: See below
Storage temperature -20OC to +70OC
Line Mounted Non-return Valves

Symbol Push-in Flow Rate at Weight Order code
Connection Ømm 6 bar, l/s Kg
4 200 0,01 PWA-L1444
6 660 0,02 PWA-L1446
8 1600 0,02 PWA-L1448
Sold in lots of 10
Dimensions
Order ØH L
code
PWA-L1444 11,0 43,0
ØH
PWA-L1466 13,0 49,5

PWA-L1488 13,5 55,0
L
Pneumatic 2.26
Terminal Block Sub-bases PZC-B
• For the remote mounting of cylinder control accessories

• Suitable for use with - Flow regulators
- Blockers
- Unloaders
- Combined devices
- Optimisers
- Soft start
Flow: See below
Storage temperature -20OC to +70OC
Terminal Block Subbases for Cylinder Controls*

For Mounting Other Push-in Bore Weight Order code
Cylinder Controls Connection Ømm Ømm Kg
G1/8 6 4 0,05 PZC-B2268
G1/4 8 6 0,05 PZC-B2289
* For remote mounting of all cylinder controls, when mounting on power valves or
cylinders is impractical.
The subbase is designed for mounting two components side by side.
Dimensions
= 31 = Test point 15,5

48
19
18,5
13
= = 8,5 27
60 35,5
Pneumatic 2.27
Pneumatic 2.28
Flexible Tubing
Pneumatic
Thermoplastic Single Tubes and Pneumo-Tube Bundles
Index
Page
Thermoplastic Single Tubes and Pneumo-Tube Bundles 3.3

Polyamide tubing 3.4 - 3.6
Polyurethane tubing 3.7 - 3.9
Accessories 3.10
Pneumatic 3.2
Thermoplastic Single Tubes and Pneumo-Tube Bundles
Principle
All Parker tubes are manufactured to International

standards and are fully compatible with Parker's
wide range of push-in, compression and screw type
tube fittings, for example Parflex thermoplastic
fittings such as Fast & Tite, True SealTM, Par-Bard
and Mini-Barb as well as components from the
Parker Pneumatics Manual.
Standard packaging of all Parker single tube

products is polyethylene bags.
Dispensing cardboard boxes (K) are available on

request.
Applications
Pneumatics Paint Systems
Lubrication Systems Automation Systems
Process Control Lines Medical Applications
Instrumentation and Control Food and Beverage Applications
Robotics Systems Fluid Applications
Pressurised Air Tools
Pneumatic 3.3
Nylon Tube
Parker calibrated nylon tubing
Parker calibrated nylon tubing is extruded in polyamide (PA11/12) for use with pneumatic fittings.
This is manufactured within the limits of DIN 73378, BS 5409 PT1 and CETOP RP54 P recommendations, and is
ideal for pneumatic applications.
For continuous use at high temperature we recommend tube which is protected against heat and light.
Advantages
- Good vibration/damping properties, - High abrasion resistance
- Tubing available in several colours for easy - Low pressure drop,
identification - No thermal expansion
Technical Features
Working pressure (bar)
O
C -40 -20 0 20 30 40 50 60 70 80 90 100
Tube size
3 x 0.60 27 27 27 27 23 20 18 16 14 13 12 11
4 x 0.65 21 21 21 21 18 15 14 12 11 10 9 8
4x1 39 39 39 39 32 28 25 22 20 18 17 11
5x1 29 29 29 29 24 21 19 17 15 14 13 10
6x1 24 24 24 24 20 17 15 13 12 11 10 8
8x1 17 17 17 17 14 12 11 10 9 8 8 6
10 x 1 13 13 13 13 11 10 9 8 7 6 6 5
10 x 1.25 18 18 18 18 15 13 11 10 9 8 8 6
10 x 1.5 22 22 22 22 18 16 14 13 11 10 10 8
12 x 1 11 11 11 11 9 8 7 6 6 5 5 4
14 x 1.5 15 15 15 15 12 11 10 9 9 7 7 5
16 x 1.5 13 13 13 13 11 9 8 7 7 6 6 5
Burst pressure (bar)

O
C -40 -20 0 20 30 40 50 60 70 80 90 100
Tube size
3 x 0.60 81 81 81 81 69 60 54 48 42 39 36 33
4 x 0.65 64 64 64 64 53 46 41 37 33 30 28 23
4x1 116 116 116 116 96 83 74 66 60 51 51 42
5x1 87 87 87 87 72 63 56 50 45 41 38 31
6x1 71 71 71 71 59 51 45 40 37 33 31 25
8x1 52 52 52 52 43 37 33 29 27 24 23 19
10 x 1 40 40 40 40 33 29 26 23 21 19 18 15
10 x 1.25 53 53 53 53 44 38 34 30 27 25 23 19
12 x 1 33 33 33 33 27 24 21 19 17 16 15 12
14 x 1.5 45 45 45 46 37 32 29 26 23 21 20 16
16 x 1.5 39 39 39 39 32 28 25 22 20 18 17 14
Working pressure of nylon tubing is dependant on the operating temperature.

Working pressures shown are based on a design factor of 3:1
Pneumatic 3.4
Nylon Tube
Parker calibrated nylon tubing
Tube bend radius Tube outside diameter
To ensure the correct functioning of both tube tolerances
fitting and pneumatic system it is important not
to exceed the minimum bend radius of the tube.
Tube Minimum Tube Tolerance

size bend radius (mm) OD (mm)
3 x 0.60 15 3 to 5mm + 0.05

4 x 0.65 20 -0.08
4x1 20
5x1 35 6 to 16mm +0.05
6x1 35 -0.10
8x1 45
10 x 1.25 60
10 x 1 60
12 x 1 70
14 x 1.50 85
16 x 1.50 95
Chemical compatibility
Parker nylon tubing is suitable for use with a wide variety of fluids. The table below shows typical fluids used with
nylon tubing.
Working temperature
Fluid
-20OC +20OC +60 OC
Cutting oil A A A
Cutting fluids A A A
Water A A A
Hydraulic oils A A A
Mineral oils / greases A A A
Carbon dioxide A A A
Acetone A A A
Gasoline B B B A = excellent, B = medium, C = poor
Trichloroethylene - C C For other fluids please contact us
Pneumatic 3.5
Nylon Tube
Nylon tubes, 25m and 100m
Tube Outside Wall Colour Order code Order code
Size Ømm Thickness 25 m length 100 m length
3x1,7 3 0,6 Clear P6T-NW03060-025 P6T-NW03060-100
3x1,7 3 0,6 Blue P6T-NB03060-025 P6T-NB03060-100
3x1,7 3 0,6 Black P6T-NC03060-025 P6T-NC03060-100
3x1,7 3 0,6 Yellow P6T-NY03060-025 P6T-NY03060-100
3x1,7 3 0,6 Red P6T-NR03060-025 P6T-NR03060-100
3x1,7 3 0,6 Green P6T-NG03060-025 P6T-NG03060-100
4x2 4 1,00 Clear P6T-NW04100-025 P6T-NW04100-100

4x2 4 1,00 Blue P6T-NB04100-025 P6T-NB04100-100
4x2 4 1,00 Black P6T-NC04100-025 P6T-NC04100-100
4x2 4 1,00 Yellow P6T-NY04100-025 P6T-NY04100-100
4x2 4 1,00 Red P6T-NR04100-025 P6T-NR04100-100
4x2 4 1,00 Green P6T-NG04100-025 P6T-NG04100-100
4x2,7 4 0,65 Clear P6T-NW04065-025 P6T-NW04065-100

4x2,7 4 0,65 Blue P6T-NB04065-025 P6T-NB04065-100
4x2,7 4 0,65 Black P6T-NC04065-025 P6T-NC04065-100
4x2,7 4 0,65 Yellow P6T-NY04065-025 P6T-NY04065-100
4x2,7 4 0,65 Red P6T-NR04065-025 P6T-NR04065-100
4x2,7 4 0,65 Green P6T-NG04065-025 P6T-NG04065-100
5x3 5 1,00 Blue P6T-NB05100-025 P6T-NB05100-100
6x4 6 1,00 Clear P6T-NW06100-025 P6T-NW06100-100

6x4 6 1,00 Blue P6T-NB06100-025 P6T-NB06100-100
6x4 6 1,00 Black P6T-NC06100-025 P6T-NC06100-100
6x4 6 1,00 Red P6T-NR06100-025 P6T-NR06100-100
6x4 6 1,00 Green P6T-NG06100-025 P6T-NG06100-100
8x6 8 1,00 Clear P6T-NW08100-025 P6T-NW08100-100

8x6 8 1,00 Blue P6T-NB08100-025 P6T-NB08100-100
8x6 8 1,00 Black P6T-NC08100-025 P6T-NC08100-100
8x6 8 1,00 Red P6T-NR08100-025 P6T-NR08100-100
8x6 8 1,00 Green P6T-NG08100-025 P6T-NG08100-100
10x8 10 1,00 Clear P6T-NW10100-025 P6T-NW10100-100

10x8 10 1,00 Blue P6T-NB10100-025 P6T-NB10100-100
10x8 10 1,00 Black P6T-NC10100-025 P6T-NC10100-100
10x8 10 1,00 Red P6T-NR10100-025 P6T-NR10100-100
10x8 10 1,00 Green P6T-NG10100-025 P6T-NG10100-100
10x8 10 1,00 Grey P6T-ND10100-025 P6T-ND10100-100
12x10 12 1,00 Clear P6T-NW12100-025 P6T-NW12100-100

12x10 12 1,00 Blue P6T-NB12100-025 P6T-NB12100-100
12x10 12 1,00 Black P6T-NC12100-025 P6T-NC12100-100
12x10 12 1,00 Red P6T-NR12100-025 P6T-NR12100-100
12x10 12 1,00 Green P6T-NG12100-025 P6T-NG12100-100
14x11 14 1,50 Clear P6T-NW14150-025 P6T-NW14150-100

14x11 14 1,50 Blue P6T-NB14150-025 P6T-NB14150-100
14x11 14 1,50 Black P6T-NC14150-025 P6T-NC14150-100
Multitube - nylon tube - PVC sheath, 25m and 100m

Number of Tube Sheath Min bend Order code
tubes Size colour radii 20° 100 m length
3 4x2,7 Black P6T-MC04N03-100
5 4x2,7 Black P6T-MC04N05-100
7 4x2,7 Black P6T-MC04N07-100
12 4x2,7 Black P6T-MC04N12-100
19 4x2,7 Black P6T-MC04N19-100
3 6x4 Black 40 P6T-MC06N03-100

5 6x4 Black 105 P6T-MC06N05-100
7 6x4 Black 115 P6T-MC06N07-100
12 6x4 Black 150 P6T-MC06N12-100
19 6x4 Black 160 P6T-MC06N19-100
Pneumatic 3.6
Polyurethane Tube
Parker calibrated polyurethane tubing
Parker calibrated polyurethane tubing is obtained by extrusion. The material hardness is 95 Shore A (slightly higher
than 40 Shore D).
Its very high flexibility allows a small minimum bend radius for compact installations.
A dimensional inspection system based on advanced laser technology maintains a tight tolerance on the outside
tube diameter.
Advantages
- Extreme flexibility with bend radii up to three times - Good vibration resistance,
better than polyamide tubing allows compact installations - Light weight,
- Tube available in several colours for line identification. - Reduced fitting time.
Technical Features
Working pressure (bar)
O
C -40 -20 0 20 30 40 50 60 70 80
Tube size
3 x 0.5 10 10 10 10 8 7 6 6 5 5
4 x 0.75 11 11 11 11 9 8 7 6 6 5
5x1 12 12 12 12 10 9 8 7 6 6
6x1 10 10 10 10 8 7 6 6 5 5
8 x 1.25 9 9 9 9 8 7 6 6 5 5
10 x 1.5 9 9 9 9 7 6 6 5 5 4
12 x 2 10 10 10 10 8 7 6 6 5 5
Burst pressure (bar)

O
C -40 -20 0 20 30 40 50 60 70 80
Tube size
3 x 0.5 30 30 30 30 24 22 19 17 15 14
4 x 0.75 33 33 33 33 27 24 21 19 17 15
5x1 37 37 37 37 30 26 23 21 19 17
6x1 30 30 30 30 24 21 19 17 15 14
8 x 1.25 28 28 28 28 23 20 18 16 14 13
10 x 1.5 26 26 26 26 22 19 17 15 14 12
12 x 2 30 30 30 30 25 22 19 17 16 14
Working pressure of polyurethane tubing is dependant on the operating temperature.

Working pressures shown are based on a design factor of 3:1
Pneumatic 3.7
Polyurethane Tube
Parker calibrated polyurethane tubing
Tube bend radius Polyurethane tubing outside
To ensure the correct functioning of both tube diameter tolerances
fitting and pneumatic system it is important not
to exceed the minimum bend radius of the tube.
Tube Minimum Tube Tolerance

size bend radius (mm) OD (mm)
3 x 0.5 13 3 to 8mm ±0.1

4 x 0.75 17
5x1 22 10 to 12mm ±0.15
6x1 27
8 x 1.25 37
10 x 1.50 54
12 x 2 62
Chemical compatibility
Parker polyurethane tubing is suitable for use with a wide variety of fluids. The table below shows typical fluids
used with polyurethane tubing.
Working temperature
Fluid
-20 OC +20OC +60OC
Cutting oil A A A
Cutting fluids A A A
Water A A A
Hydraulic oils A A A
Mineral oils / greases A A A
Carbon dioxide A A A
Gasoline B B B
Trichloroethylene - C C A = excellent, B = medium, C = poor
Acetone - C C For other fluids please contact us
Pneumatic 3.8
Polyurethane Tube
Main data for Polyurethane tubes, 25m and 100m
Tube Outside Wall Colour Order code Order code
Size Ømm Thickness 25 m length 100 m length
3x2 3 0,5 Clear P6T-PW0305-025 P6T-PW0305-100
3x2 3 0,5 Blue P6T-PB0305-025 P6T-PB0305-100
3x2 3 0,5 Black P6T-PC0305-025 P6T-PC0305-100
4x2,5 4 0,75 Clear P6T-PW04075-025 P6T-PW04075-100

4x2,5 4 0,75 Blue P6T-PB04075-025 P6T-PB04075-100
4x2,5 4 0,75 Black P6T-PC04075-025 P6T-PC04075-100
6x4,0 6 1,00 Clear P6T-PW06100-025 P6T-PW06100-100

6x4,0 6 1,00 Blue P6T-PB06100-025 P6T-PB06100-100
6x4,0 6 1,00 Black P6T-PC06100-025 P6T-PC06100-100
8x5,5 8 1,25 Clear P6T-PW08125-025 P6T-PW08125-100

8x5,5 8 1,25 Blue P6T-PB08125-025 P6T-PB08125-100
8x5,5 8 1,25 Black P6T-PC08125-025 P6T-PC08125-100
10x7,0 10 1,50 Clear P6T-PW10150-025 P6T-PW10150-100

10x7,0 10 1,50 Blue P6T-PB10150-025 P6T-PB10150-100
10x7,0 10 1,50 Black P6T-PC10150-025 P6T-PC10150-100
12x8,0 12 2,00 Clear P6T-PW12200-025 P6T-PW12200-100

12x8,0 12 2,00 Blue P6T-PB12200-025 P6T-PB12200-100
12x8,0 12 2,00 Black P6T-PC12200-025 P6T-PC12200-100
14x9,5 14 2,25 Clear P6T-PW14225-025 P6T-PW14225-100

14x9,5 14 2,25 Blue P6T-PB14225-025 P6T-PB14225-100
14x9,5 14 2,25 Black P6T-PC14225-025 P6T-PC14225-100
Pneumatic 3.9
Accessories
Tube cutter
Weight Order code
Kg
0,030 P6T-C
Main data for Spiral conduit for tube bundles

Min Max length Colour Weight Order code
bundle bundle m Kg
10 mm 40 mm 25 Grey 1,000 PZT-X05
19 mm 100 mm 25 Grey 1,000 PZT-X20
Sold in rolls of 25m
Pneumatic 3.10
Exhaust Silencers
Pneumatic
Exhaust silencers
Exhaust silencers
P6M-PA... 9090... 9721... PZC P6M-MA 48021000

Porous Sintered bronze Heavy duty Self Cleaning
polythene Male Female all metal
Adjustable restrictor
Exhaust silencing
Oil removal
Disposable
Renewable element
Cleanable
Modular
Optional manifold
No of connections 1 1 1 1 1 1
Push-in
Male ports
Female ports
Size
G1
G3/4
G1/2
G3/8 8 mm
G1/4 6 mm
G1/8 4 mm
M5
Refer to page 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5 4.4 - 4.5
Pneumatic 4.2
Exhaust silencers
Restrictor silencers Reclassifier silencers
0069301 9126 P6R-CB.. 351... ECS..

Collectair Metal Plastic
body body
6+ 1+ 1
4.6 4.6 4.7 4.8 - 4.9 4.8 - 4.9
Pneumatic 4.3
Exhaust silencers
• All plastic ultra light weight versions

• Sintered metal
• All metal versions for heavy duty applications
• Versions with push-in connections
• High noise level reduction
• Low back pressure generation
Plastic Working temperature: -100C to +800C

Efficiency 92%
Metal Working temperature: -100C to +740C Working pressure up to 17 bar
500 Plastic Series
Symbol Port Ø Weight Order code

thread A B C g
M5 23 6,5 4 0,01 P6M-PAC5
G1/8 29 14 6 0,02 P6M-PAB1
G1/4 34 17 6 0,04 P6M-PAB2
A B
C
G3/8 60 25 9 0,06 P6M-PAB3
G1/2 64 25 11 0,10 P6M-PAB4
G3/4 140 38 14 0,50 P6M-PAB5
G1 160 48 20 0,62 P6M-PAB6
Push-in Series
Symbol Port Height on Weight Order code
mm Push-in g
4 20,0 0,040 PZC-X14
6 35,5 0,025 PZC-S1006
8 34,0 0,030 PZC-S1008
Pneumatic 4.4
Exhaust silencers
Sintered bronze Series
Symbol Port A/F Weight Order code

thread A B C g
M5 23 6,5 4 0,003 9721 9000-05
A G1/8 24 10 12 0,009 9090 0507-00
G1/4 32 11 16 0,019 9090 0508-00
G3/8 43 13 21 0,041 9090 0509-00
C
G1/2 60 16 24 0,068 9090 0510-00
B G3/4 75 10 32 0,126 9090 0511-00
G1 77 12 37 0,188 9090 0515-00
Sintered Bronze Series (female)

Symbol Port Ø A/F Weight Order code
mm A B C g
A G1/8 15 8 13 0,060 9721 9004-04
Heavy Duty Series

Female A B C g
G3/8 83 37 - 0,124 P6M-MA13

G1/2 105 51 - 0,362 P6M-MA14
G3/4 143 73 - 0,670 P6M-MA16
G1 143 73 - 0.666 P6M-MA18
A B
Self Cleaning, 48 Series

Symbol Port Ø A/F Weight Order code
thread A B C E g
G1/8 52 16 8 12 0,010 48021000
G1/4 53 22,5 10 17 0,018 48041000
E hexagone ØF
G3/8 78 32 12,7 24 0,042 48061000
G1/2 78 32 14 24 0,042 48081000
B
G3/4 12 39 16 33 0,082 48121000

C
G1 120 39 20 33 0,082 48161000
A
Pneumatic 4.5
Exhaust silencers
Restrictor - Silencers
• Metal, stainless steel or plastic versions

• Screwdriver adjustment
• Simple control of cylinder speeds
• High noise level reduction
Sintered Metal Series

Symbol Port A/F Weight Order code
thread A B C g
M5 16 11 7,6 0,04 33006
A R1/8 33 25 13 0,16 43006*
B R1/4 49 35 17,5 0,24 T53006
R3/8 68 52 27 0,56 T63006A
G1/2 64 45 27 0,60 B73006
C
* Sleeve type hand adjusted
Sintered Plastic Series

thread A B C g
G1/8 23 16 7 0,002 9301 0509-01
A G1/4 32 23 9 0,004 9301 0509-02
B
G3/8 40 30 10 0,010 9301 0509-03
G1/2 50 38 12 0,050 9301 0509-04
C
Sintered Stainless Steel Series

thread A B C g
G1/8 33 25 13,0 0,040 9126 9001-95
A G1/4 49 35 17,5 0,040 9126 9001-96
B
C
Pneumatic 4.6
Exhaust silencers
Reclassifier - Silencers
• Removes oil mist from exhaust airs

• Efficiently silences exhaust air
• Easily replaceable element
• Up to 6 exhaust lines
• Gauge messurement of element efficiency
• Modular design

Plastic Working temperature: -00C to +660C The Collectair enables the collection of all the exhaust lines in a
Efficiency >99% system to be routed through a filter element which efficiently
removes solid particles and oil vapours. It also silences the
Flow rate Max 30l/s exhausting air to approximately 25 dBa. A special gauge
shows the level of filter contamination by measuring the over
pressure in the element.
Available with either G1/4 , G3/8, G1/2 or G3/4 modular port

blocks, the top face of the unit also features 4 rubber grommets
for push-in connection of Ø4 mm to Ø10 mm flexible tubing.
Collectair Series, complete units
Symbol Port
thread A A1 B B1
G1/4 102 185 252 202
G3/8 102 185 252 202
G1/2 102 185 252 202
G3/4 102 185 252 202
Weight Order code

C C1 C2 kg
91 116 117 1,200 P6R-CB12B*
91 116 117 1,200 P6R-CB13B*
91 116 117 1,200 P6R-CB14B*
91 116 117 1,200 P6R-CB16B*
Note: To connect units in series order a complete unit plus one body *Supplied complete with port blocks, wll mounting bracket
connector per additional unit. and pressure guage to indicate condition
Body connector Part No P3E-KA00CBN
Collectair Series, basic modules

Supplied complete less port blocks, wall brackets Port Type of Weight Order code
and pressure guage. size Reclassifier kg
None Collectair 1,076 P6R-CA00N
None Replacement filter cartidge 0,122 P6R-CK00E
Pneumatic 4.7
Exhaust silencers
Reclassifier - Silencers
Metal Series, Repairable and
Disposable versions
• Removes oil mist from exhaust airs

• Efficiently silences exhaust air
• Improves working conditions

Metal repairable version Disposable version
Working temperature 0 °C to 66 °C max. Working temperature 0° C to 52 °C max.
Working pressure Max 7 bar Working pressure Max 7 bar
Efficiency Better than 99% Efficiency Better than 99%
Maximum flow rate G1/2, G3/4 small unit 27,8 l/s Maximum flow rate See graph
G3/4, G1 large unit 50 l/s
Metal Repairable Series

Symbol Port A/F Weight
thread Type A Ø B kg Order code
G1/2 Small 182 110 50 0,572 3514S
B
G3/4 Small 182 110 50 0,592 3516S
G3/4 Large 297 110 55 1,100 3516
G1 Large 297 110 55 1,100 3518
Replacement Weight Order

A
Element kg code
Small 0,200 3514S-2
Large 0,200 3516-2
Ø110
Pneumatic 4.8
Exhaust silencers
Manifold for Metal Repairable version

No Weight Order code
ports kg
5 0,270 M3516-5
7 0,432 M3516-7
9 0,574 M3516-9
11 0,722 M3516-11
13 0,870 M3516-13
The manifole is available for G3/4 sizes only.

For other sizes consult Technical Sales Dep't. Wall mounting kit 0,040 3516-W
Disposable version
Symbol Port Weight Order code
size kg
G1/2 0,104 ECS B-2
G3/4 0,134 ECS B-4
Pneumatic 4.9

Pneumatic Connectors PDF

Uploaded by

Copyright:

Available Formats

Pneumatic Connectors PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pneumatic Connectors PDF

Uploaded by

Copyright:

Available Formats

Pneumatic Connectors,

Pneumatic Tubing & Cylinder

Push-in Fittings Overview 1.3 - 1.7

Push-in Fittings 1.8 - 1.22

Push-in Fitting Dimensions 1.23 - 1.47

Cylinder Control Accessories 2.1 - 2.27

Flexible Pneumatic Tubing Overview 3.1 - 3.3

Nylon Tubing 3.4 - 3.6

Polyurethane Tubing 3.7 - 3.9

Tubing Accessories 3.10

Exhaust Silencers Overview 4.1 - 4.3

Exhaust Silencers 4.4 - 4.9

Prestolok Micro Prestolok 2 Prestolok

For tube Ø mm 3-6 4-14 4-14 Refer to page

For detailed information see technical leaflet

Prestolok Micro Prestolok 2 Prestolok

Perfect miniaturisation. A multi-functional push-button. Ready to use fitting

Protective cap High resistance polyamide body Ready-to-use fitting

Ready-to-use fitting Straight male connectors with Plastic push button

Male connector - metric straight thread

Male connector - BSPP

Female connector - BSPP

For dimensions see page

Prestolok Micro page 23 to 30

Male connector - BSPT

For dimensions see page

Prestolok Micro page 23 to 30

Adjustable male elbow - metric straight thread

Adjustable male elbow - BSPP

Compact adjustable male elbow - metric straight thread

Compact adjustable male elbow - BSPP

Adjustable extended male elbow - BSPP

For dimensions see page

Prestolok Micro (Plastic) page 23 to 30

Compact elbow - BSPT

Adjustable male elbow - BSPT

Compact adjustable male elbow - BSPT

Adjustable extended male elbow - BSPT

For dimensions see page

Prestolok Micro (Plastic) page 23 to 30

Adjustable male run tee - BSPP

Adjustable male branch tee - metric straight thread

Adjustable male branch tee - BSPP

Adjustable male branch tee - BSPT

For dimensions see page

Prestolok Micro (Plastic) page 23 to 30

Adjustable male Y connector - metric straight thread

Adjustable male Y connector - BSPP

Adjustable double male Y connector - BSPP

Adjustable male multiple tee - BSPP

For dimensions see page

Prestolok Micro (Plastic) page 23 to 30

Adjustable male Y connector - BSPT

Adjustable double male Y connector - BSPT

Adjustable male multiple tee - BSPT

For dimensions see page

Prestolok Micro (Plastic) page 23 to 30

Equal union elbow

Equal union tee