Scribd
Upload
81 views1 page

C1St CTT Off Defect: Point of Detection Application

1. This document provides troubleshooting steps for a "TCD - 089 C1ST CTT OFF DEFECT" issue. 2. The steps include checking the power status of components C110 and P48, the connection of the C1ST coil and auxiliary contacts, and the C1ST operation and auxiliary circuits. 3. Additional steps check the TCD88 and TCD89 by turning the C1ST on or off by force and monitoring input buffers to diagnose potential issues with the DOR-230 PCB or C1ST component itself.

Uploaded by

Bartz Santos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views1 page

C1St CTT Off Defect: Point of Detection Application

1. This document provides troubleshooting steps for a "TCD - 089 C1ST CTT OFF DEFECT" issue. 2. The steps include checking the power status of components C110 and P48, the connection of the C1ST coil and auxiliary contacts, and the C1ST operation and auxiliary circuits. 3. Additional steps check the TCD88 and TCD89 by turning the C1ST on or off by force and monitoring input buffers to diagnose potential issues with the DOR-230 PCB or C1ST component itself.

Uploaded by

Bartz Santos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

● Run CPU

TCD - 089 C1ST CTT OFF DEFECT


Point of Application ● DI120-150
Detection ○ Speed CPU ● DI180-420
[Meaning]
[Actions to take]
When C1ST does not turn OOFF within 500ms after C1ST OFF command
is outputted from Run CPU. 1. Check the power status of C110 and P48.

2. Check C1ST coil and auxiliary contact for screw


connection status.
Check the connection status of RC connected to C1ST
coil body.

[Diagram] 3. Check the connection and contact status of C1ST


GD operation circuit(Drawing3x02223).
Refer to 3x02223, CTL C[8] OS_C1ST
0x530C 4. Check the connection and contact status of C1ST
C110 D110 auxiliary circuit(Drawing3x02227).
R5SC R2LD STR1-08 DOR-230 DOR-230 RCC-14 A2
C1VD C A1
12
C1ST 5. Check TCD88.
8 9 5 53 54
CTT-01 CTT-02
DOR-210 PCB 1)Turn ON C1ST by force and check the input buffer(0x501F)
data. If there’s no changes found, try replacing
DOR-230 PCB.
Refer to 3x02227, I/O C[1] 2)If input signal is normal, DOR-230 PCB output buffer
P48 GD48 may be inferior.
RCA-08 DOR-230 3)If the problem exists even after replacing PCB, it may
C1ST C IS_C1ST
be coming from C1ST self defect.
13 14 0x501F
INA-15
6. Check TCD89.

Perform check by the opposite way of above item 5.


If TCD89 occurs even though C1ST OFF operation is normal,
try increasing OFF DELAY TIMER value above 500ms.
If TCD89 does not occurs by this action, C1ST OFF’s
characteristic inferior.

You might also like