Scribd
Upload
181 views3 pages

Remove and Install Radiator Cores (Folded Core)

The document provides instructions for removing and installing radiator cores on a truck engine. It details draining the coolant, disconnecting hoses, removing securing bolts and brackets, lifting out the top tank, and removing individual cores. Reinstallation is the reverse of removal, ensuring proper seal lubrication and core spacing.

Uploaded by

mguerra_635875
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
181 views3 pages

Remove and Install Radiator Cores (Folded Core)

The document provides instructions for removing and installing radiator cores on a truck engine. It details draining the coolant, disconnecting hoses, removing securing bolts and brackets, lifting out the top tank, and removing individual cores. Reinstallation is the reverse of removal, ensuring proper seal lubrication and core spacing.

Uploaded by

mguerra_635875
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Cerrar SIS

Pantalla anterior

Producto: TRUCK
Modelo: 789 TRUCK 9ZC
Configuración: 789 TRUCK 9ZC00611-UP (MACHINE) POWERED BY 3516
ENGINE

Desarmado y Armado
3516 VEHICULAR ENGINE FOR 789 TRUCK
Número de medio -SENR3425-01 Fecha de publicación -01/05/1990 Fecha de actualización -11/10/2001

Radiator Cores (Folded Core)


SMCS - 1353-010

Remove And Install Radiator Cores (Folded Core)

1. Drain the coolant from the engine.

2. Disconnect hose assembly (3) from the elbow.

3. Loosen the clamps that hold hoses (1) and (4). Move the hoses away from the radiator.

4. Remove the bolts the bolts that hold fan guard (2) to the radiator. Move the fan guard away from the
radiator.

5. Fasten a hoist to top tank (5) with tooling (A).

6. Remove all of the bolts that hold air conditioning condenser (6) to the top tank of the radiator.
7. Remove all of the bolts that hold top tank (5) to both of the side channels. Remove the top tank from the
radiator cores. The weight of the top tank is approximately 140 kg (308.0 lb).

8. Remove the rubber seals from the bottom of the top tank. Some of the seals may stay on the radiator cores.
Remove them also.

9. Remove two bolts (6), one at the rear not shown, from each core that is to be removed.

10. Remove the radiator core from the bottom tank.

11. Remove rubber seal (7) from the bottom tank.

12. Install the radiator cores in the reverse order of removal.

14. Lubricate all rubber seals (7) at the bottom and top of the cores with liquid soap just prior to assembly.

15. Before tightening bolts (6), adjust gap (X), at the front of the radiator, to 6.5 mm (.25 in) and gap (Y) at
the rear of the radiator to 2.0 ± 1.5 mm (.08 ± .06 in). The cores must not contact each other after
assembly.

16. Fill the cooling system with coolant and check for leaks. See the Maintenance Manual.

Copyright 1993 - 2020 Caterpillar Inc. Mon Nov 23 2020 11:25:18 GMT-0500 (hora estándar de Perú)
Todos los derechos reservados.
Red privada para licenciados del SIS.

You might also like