Ecowool Spi 2014

THERMAL
TECHNICAL DATA SHEET
ECOWOOL SPI
Less dusty and less itchy. Specifically engineered
to produce a comfortable and less dusty
insulation. It creates a pleasant work experience
by reducing the tingling feeling during
installation.
Economical to Apply. Lightweight, simplicity of

design and easily fabricated, one-piece
construction speeds on-the-job handling and
application.
Time and Cost Reduction. Costs less than other

types of insulation used in its temperature range.
DESCRIPTION
ECOWOOL SECTIONAL PIPE INSULATION (SPI) is Spring Hinge. One-piece construction with full-
manufactured from rigid glass mineral wool pre-moulded length ‘spring hinge’ opening helps speed jobsite
into one-piece cylindrical sections. These sections are slit installation.
along one wall to allow the insulation to be opened and
installed over piping. The combination of these materials Lightweight. Lightweight and easy to handle.
creates an easily installed, damage-resistant pipe Only three carton sizes are required to handle
insulation with high thermal efficiency, exceptional sound most pipe sizes and thicknesses.
absorption properties and an increased operating
temperature limit. Durable. The life span of sectional pipe insulation
is further enhanced by the ability of the fibre glass
APPLICATIONS to resist damage from shrinking, swelling, rot and
It is designed to be used on commercial, power or process other forms of potential deterioration.
lines where fire safety and a pleasing appearance are
desired. The pipe insulation can be used on cold and PRODUCT RANGE
chilled water lines, brine, refrigerant and special process Manufactured in 1 metre length and in a range of
lines when the joints are sealed to prevent moisture thicknesses to enable compliance with BS5422
migration. The glass mineral wool insulation has a and beyond. The pre-formed pipe sections are
operating temperature limits between -18°C to 454°C. produced to fit all British Standard steel and
copper pipe sizes.
FACTORY APPLIED JACKET
Available in a variety of factory applied jacket where extra Alkalinity. pH 6~7.
protection of the outer surface or condensation control is
required. Corrosion Resistance. Chemically inert. Will not
cause or accelerate corrosion of steel, stainless
ADVANTAGES steel, copper or aluminum due to its specifically
High Insulating Efficiency. Excellent thermal conductivity inorganic and mineral composition. Tested and
values. complies with ASTM C665
Precise and Quick fabrication. Unique fibre network THERMAL CONDUCTIVITY

pattern that allows for precise and quick fabrication on the Tested and complies with ASTM C518 at 23°C
job. mean temperature.
Density K- Value (W/m K)
Optimal fibre diameter. Optimal fibre diameter ranging 64kg/m3 0.0309
from 4-5 microns produces more air pockets which 80kg/m3 0.0309
enables the insulation to provide a better and enhanced 0.0309
96kg/m3
performance.
AVAILABLE JACKET
Better fibre network. Fine, longer and evenly distributed  FSK – Foil Scrim Kraft
fibre network helps in creating better tensile strength  FRK - Foil Reinforced Kraft Paper
allowing the insulation to demonstrate superior durability.  Sisalation Foil
 Kraftless Foil
Read This Before You Buy
Insulation’s effectiveness is measured in R-Value. R stands for the insulation’s resistance to heat flow; heat escapes from your building and heated air
enters your building. The higher the R-Value, the greater the resistance to heat flow and the greater your potential for saving energy, natural resources
and money. Compare insulation R-Values before you buy.
R-Value = Thickness / K-Value

THERMAL
TECHNICAL DATA SHEET
ECOWOOL SPI
PRODUCTS AVAILABLE
Density (kgs/m3) : 96 Density (kgs/m3) : 80 Density (kgs/m3) : 64 Density (kgs/m3) : 56
Thickness (mm) : Thickness (mm) : Thickness (mm) : Thickness (mm) :
15,20,25,30,32,38,40,50,60,65,70,75 15,20,25,30,32,38,40,50,60,65,70,75 20,25,30,32,38,40,50,60,65,70,75 25,30,32,38,40,50,60,65,70,75
TYPE OD (mm) TYPE OD (mm) TYPE OD (mm) TYPE OD (mm)
16 16 16 16
22 22 22 22
COPPER
COPPER
COPPER
COPPER
S 28.7 S 28.7 S 28.7 S 28.7
35 35 35 35
54 54 54 54
M 67 M 67 M 67 M 67
21.5 21.5 21.5 21.5
26.9 26.9 26.9 26.9
33.8 33.8 33.8 33.8
S S S S
42.2 42.2 42.2 42.2
48.4 48.4 48.4 48.4
60.4 60.4 60.4 60.4
76.1 76.1 76.1 76.1
88.8
STEEL
STEEL
STEEL
STEEL
88.8 88.8 88.8
M M M M
101.5 101.5 101.5 101.5
114.2 114.2 114.2 114.2
141.1 141.1 141.1 141.1
168.5 168.5 168.5 168.5
219 219 219 219
L L L L
273.5 273.5 273.5 273.5
324 324 324 324
355 355 355 355
12.7 12.7 12.7 12.7
19.1 19.1 19.1 19.1
25.4 25.4 25.4 25.4
S S S S
31.8 31.8 31.8 31.8
38.2 38.2 38.2 38.2
50.7 50.7 50.8 50.7
OTHERS
OTHERS
OTHERS
OTHERS
63.4 63.4 63.5 63.4

73 73 73 73
M M M M
108 108 108 108
113.5 113.5 113.5 113.5
127.1 127.1 127.1 127.1
L 152.4 L 152.4 L 152.4 L 152.4
193.7 193.7 193.7 193.7
Short Form Specification (unfaced)
All glass mineral wool sectional pipe insulation shown on drawings or specified herein shall be “ECOWOOL SPI” ______kg (96kg/m3,
80kg/m3, 64kg/m3 and 56kg/m3) with ____mm (OD) and thickness of ____mm.
Short Form Specification (faced)

All glass mineral wool sectional pipe insulation shown on drawings or specified herein shall be ECOWOOL SPI ____kg/m3 (96kg/m3,
80kg/m3, 64kg/m3 and 56kg/m3) with ____mm (OD) and thickness of ____mm. The product shall be faced with
____(FSK/FRK/Sisalation Foil/Kraftless Foil)
Technical specifications as shown in this literature are intended to be used as general guidelines only. The physical and chemical properties of sound
control thermal and acoustical glass mineral wool insulation listed herein represent typical average values obtained in accordance with accepted test
methods and are subject to normal manufacturing variations They are supplied as a technical service and are subject to change without notice. Any
references to numerical flame spread or smoke developed ratings are not intended to reflect hazards presented by these or any other materials under
actual fire conditions.
PGF Insulation Sdn. Bhd. (228905-M)

Penang Office: 2449, Lorong Perusahaan Sepuluh, Kawasan Perusahaan Perai, 13600 Perai, Penang, Malaysia
Tel: +604 390 8460 Fax: +604 399 6197 E-mail: [email protected]
KL Office: 46-2, Block D, Zenith Corporate Park, Jalan SS7/26, 47301 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: +603 7886 0074 Fax: +603 7886 0077
E-mail: [email protected]

Ecowool Spi 2014

Uploaded by

Copyright:

Available Formats

Ecowool Spi 2014

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ecowool Spi 2014

Uploaded by

Copyright:

Available Formats

THERMAL

TECHNICAL DATA SHEET

Economical to Apply. Lightweight, simplicity of

Time and Cost Reduction. Costs less than other

Precise and Quick fabrication. Unique fibre network THERMAL CONDUCTIVITY

R-Value = Thickness / K-Value

63.4 63.4 63.5 63.4

Short Form Specification (faced)

PGF Insulation Sdn. Bhd. (228905-M)

You might also like