https://www.phoenixcontact.

com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)

4-way signal duplicator for electrical isolation and duplication of analog signals with screw connection,
standard configuration

Product Description
The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion, amplification and filtering
of standard signals.
On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected, on the output side there are two current
outputs that can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation).
The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

Your advantages
 Power supply possible via the foot element (TBUS)
 Highly-compact isolating amplifier for electrical isolation, conversion, amplification, filtering, and duplication of standard analog signals
 Up to 8 signal combinations can be configured using DIP switches
 4-way isolation
 Duplication of a standard analog signal on two current outputs

Key Commercial Data

Packing unit 1 pc

GTIN

GTIN 4017918974800

Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
Utilization restriction
area

Dimensions
Width 6.2 mm
Height 93.1 mm
Depth 101.2 mm
10/22/2020   Page 1 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Technical data
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Degree of protection IP20
EN 61000-6-2 When being exposed to interference, there may be
Noise immunity
minimal deviations.

Input data
Number of inputs 1
Configurable/programmable Yes, unconfigured
Voltage input signal 0 V ... 10 V (please indicate if different setting when ordering)
1 V ... 5 V
Current input signal 0 mA ... 20 mA
4 mA ... 20 mA
max. input voltage 30 V
Max. input current 50 mA
Input resistance of voltage input approx. 100 kΩ
Input resistance current input approx. 50 Ω

Output data
Number of outputs 2
Configurable/programmable Yes, unconfigured
Current output signal 2x 0 mA ... 20 mA
2x 4 mA ... 20 mA
Max. output current approx. 22 mA
Load/output load current output ≤ 250 Ω (at 20 mA)
Ripple < 20 mVPP (at 250 Ω)

Power supply
Nominal supply voltage 24 V DC
19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the
Supply voltage range
supply voltage. It can be snapped onto a 35 mm DIN rail according to
EN 60715))
Max. current consumption < 30 mA (at 24 V DC incl. load)
Power consumption < 600 mW

Connection data
Connection method Screw connection
Stripping length 12 mm
Screw thread M3
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 26 ... 12

10/22/2020   Page 2 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Technical data
General
No. of channels 2
Maximum transmission error ≤ 0.2 % (of final value)
Transmission error, typical < 0.1 %
Maximum temperature coefficient < 0.01 %/K
Temperature coefficient, typical < 0.004 %/K
Limit frequency (3 dB) approx. 35 Hz
Protective circuit Transient protection
Electrical isolation Basic insulation according to EN 61010
Overvoltage category II
Degree of pollution 2
Rated insulation voltage 50 V AC/DC
Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
EN 61000-6-2 When being exposed to interference, there may be
Noise immunity
minimal deviations.
Color green
Housing material PBT
Mounting position any
The T connector can be used to bridge the supply voltage. It can be
Assembly instructions
snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2

EMC data
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Typical deviation from the measuring range final value 5%
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Typical deviation from the measuring range final value 5%
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Typical deviation from the measuring range final value 5%

Standards and Regulations

Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Connection in acc. with standard CUL
Standards/regulations EN 61000-4-2
Designation Electromagnetic RF field

10/22/2020   Page 3 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Technical data
Standards and Regulations
Standards/regulations EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Electrical isolation Basic insulation according to EN 61010
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
GL GL EMC 2 D

Conformance/approvals
Designation CE
Identification CE-compliant
Designation ATEX
Identification  II 3 G Ex nA IIC T4 Gc X
Designation UL, USA/Canada
Identification UL 508 Recognized
Class I, Div. 2, Groups A, B, C, D T5
Designation GL
Identification GL EMC 2 D

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50 years
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”

Drawings

10/22/2020   Page 4 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Block diagram

10/22/2020   Page 5 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Dimensional drawing

Classifications
eCl@ss

eCl@ss 10.0.1 27210120

eCl@ss 4.0 27210100
eCl@ss 4.1 27210100
eCl@ss 5.0 27210100
eCl@ss 5.1 27210100
eCl@ss 6.0 27210100
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
eCl@ss 9.0 27210120

ETIM

ETIM 4.0 EC002653

ETIM 5.0 EC002653
ETIM 6.0 EC002653
ETIM 7.0 EC002653

10/22/2020   Page 6 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Classifications
UNSPSC

UNSPSC 6.01 30211506

UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
UNSPSC 18.0 39121008
UNSPSC 19.0 39121008
UNSPSC 20.0 39121008
UNSPSC 21.0 39121008

Approvals
Approvals

Approvals

GL / UL Recognized / cUL Recognized / DNV GL / cULus Recognized

Ex Approvals

ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed

Approval details

GL 
  https://approvalfinder.dnvgl.com/  24917-05 HH

UL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705

cUL Recognized 
  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 238705

DNV GL 
  https://approvalfinder.dnvgl.com/  TAA00002R0

10/22/2020   Page 7 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Approvals

cULus Recognized 
    

Accessories
Accessories
DIN rail connector

DIN rail bus connectors - ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - 2869728

DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
 
 

Marking material

Transparent cover - MINI MCR DKL - 2308111

Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack
marker strip 6.2 mm
 
 

Marking label - MINI MCR-DKL-LABEL - 2810272

Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL
 
 

Power module

Power terminal block - MINI MCR-SL-PTB - 2864134

MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw
connection, maximum current consumption of up to 2 A
 
 

10/22/2020   Page 8 / 9
https://www.phoenixcontact.com/pi/products/2864176

Signal duplicator - MINI MCR-SL-UI-2I-NC - 2864176

Accessories

Power terminal block - MINI MCR-SL-PTB-SP - 2864147

MCR feed-in terminal for supplying several MINI Analog modules via a DIN rail connector, with spring-cage
connection, maximum current consumption of up to 2 A. Replacement part: 2902067 MINI MCR-2-PTB-PT.
 
 

Power supply

Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5 - 2866983

Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
 
 

Power supply unit - MINI-PS-100-240AC/24DC/1.5/EX - 2866653

Primary-switched power supply MINI POWER for DIN rail mounting, input: 1-phase, output: 24 V DC/1,5 A, for the
potentially explosive area
 
 

Phoenix Contact 2020 © - all rights reserved

http://www.phoenixcontact.com

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com

10/22/2020   Page 9 / 9