Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Syllabus: Department of Mechanical Engineering

    Uploaded by

    Chhagan kharol
    The document outlines the syllabus for a course on Quality Management. It includes 6 units that will be covered: [1] Introduction to quality concepts; [2] Modeling and analyzing process quality; [3] Statistical process control using control charts; [4] Acceptance sampling plans; [5] Quality assurance concepts; and [6] Reliability, availability, and Taguchi methods. Each unit lists several topics that will be discussed to provide students an overview of the key areas and concepts covered in the course.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Syllabus: Department of Mechanical Engineering

    Uploaded by

    Chhagan kharol
    34 views2 pages
    The document outlines the syllabus for a course on Quality Management. It includes 6 units that will be covered: [1] Introduction to quality concepts; [2] Modeling and analyzing process quality; [3] Statistical process control using control charts; [4] Acceptance sampling plans; [5] Quality assurance concepts; and [6] Reliability, availability, and Taguchi methods. Each unit lists several topics that will be discussed to provide students an overview of the key areas and concepts covered in the course.

    Original Title

    1 QA syllabus

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document outlines the syllabus for a course on Quality Management. It includes 6 units that will be covered: [1] Introduction to quality concepts; [2] Modeling and analyzing process quality; [3] Statistical process control using control charts; [4] Acceptance sampling plans; [5] Quality assurance concepts; and [6] Reliability, availability, and Taguchi methods. Each unit lists several topics that will be discussed to provide students an overview of the key areas and concepts covered in the course.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    34 views2 pages

    Syllabus: Department of Mechanical Engineering

    Uploaded by

    Chhagan kharol
    The document outlines the syllabus for a course on Quality Management. It includes 6 units that will be covered: [1] Introduction to quality concepts; [2] Modeling and analyzing process quality; [3] Statistical process control using control charts; [4] Acceptance sampling plans; [5] Quality assurance concepts; and [6] Reliability, availability, and Taguchi methods. Each unit lists several topics that will be discussed to provide students an overview of the key areas and concepts covered in the course.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    DEPARTMENT OF MECHANICAL ENGINEERING

    SYLLABUS

    Course: B.Tech. Class/Section: III Year/ VI Sem Date:………..

    Name of Faculty: Name of Subject: QUALITY


    MANAGEMENT Code: 6ME4-05
    S. No. UNIT TOPIC
    Unit – I Introduction: Objective, scope and outcome of the
    1
    course.
    The meaning of Quality and quality improvement
    dimensions of quality, history of quality methodology,
    quality control, Quality of design and quality of
    conformance, Quality policy and objectives,
    Economics of quality.
    Unit – II
    2 Modeling process quality: Describing variation,
    frequency distribution, continuous and discrete,
    probability distributions, pattern of variation,
    Inferences about process quality: sampling
    distributions and estimation of process parameters.
    Analysis of variance.
    Statistical Quality Control: Concept of SQC, Chance
    and assignable causes of variation, statistical basis of
    control chart, basic principles, choice of control
    Unit – III limits, sample size and sampling frequency, analysis
    3
    of patterns on control charts. The magnificent seven.
    Control chart for variables,: X-bar and R charts, X-bar
    and S charts, control chart for individual measurement.
    Application of variable control charts.
    Control chart for attributes: control chart for fraction
    non conforming P- chart, np-chart, c-chart and u-chart.
    Unit – VI Demerit systems, choice between attribute and variable
    4
    control chart. SPC for short production runs. Process
    capability analysis using histogram and probability
    plot, capability ratios and concept of six sigma.
    5 Unit – V Quality Assurance: Concept, advantages, field
    complaints, quality rating, quality audit.
    Acceptance Sampling: Fundamental concepts in
    acceptance sampling, operating characteristics curve.
    Acceptance sampling plans, single, double and
    multiple sampling plans, LTPD, AOQL,AOQ.
    Introduction to Quality systems like ISO 9000 and
    ISO 14000.
    Reliability and Life Testing- Failure models of
    components, definition of reliability, MTBF, Failure
    rate, common failure rate curve, types of failure,
    reliability evaluation in simple cases of exponential
    Unit – VI failures in series, paralleled and series-parallel device
    6
    configurations, Redundancy and improvement factors
    evaluations.
    Introduction to Availability and Maintainability
    Introduction to Taguchi Method of Design of
    Experiments, Quality loss function.

    Head, ME

    You might also like