Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Drain Design

    Uploaded by

    ghansa
    The document provides details for designing a drain system for an area experiencing rainfall. It includes calculations of rainfall intensity, runoff from catchment areas, and sizing of drains. Rainfall intensity was calculated as 58.4 mm/hr for a 15 minute duration based on data for the area. Catchment areas and runoff flows were identified for 7 drains ranging from 0.05 to 0.13 cubic meters per second. Drain sizes were then calculated based on total discharge, bed slope, flow section dimensions, and capacity.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Drain Design

    Uploaded by

    ghansa
    44 views2 pages
    The document provides details for designing a drain system for an area experiencing rainfall. It includes calculations of rainfall intensity, runoff from catchment areas, and sizing of drains. Rainfall intensity was calculated as 58.4 mm/hr for a 15 minute duration based on data for the area. Catchment areas and runoff flows were identified for 7 drains ranging from 0.05 to 0.13 cubic meters per second. Drain sizes were then calculated based on total discharge, bed slope, flow section dimensions, and capacity.

    Original Title

    drain design (Autosaved)

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details for designing a drain system for an area experiencing rainfall. It includes calculations of rainfall intensity, runoff from catchment areas, and sizing of drains. Rainfall intensity was calculated as 58.4 mm/hr for a 15 minute duration based on data for the area. Catchment areas and runoff flows were identified for 7 drains ranging from 0.05 to 0.13 cubic meters per second. Drain sizes were then calculated based on total discharge, bed slope, flow section dimensions, and capacity.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    44 views2 pages

    Drain Design

    Uploaded by

    ghansa
    The document provides details for designing a drain system for an area experiencing rainfall. It includes calculations of rainfall intensity, runoff from catchment areas, and sizing of drains. Rainfall intensity was calculated as 58.4 mm/hr for a 15 minute duration based on data for the area. Catchment areas and runoff flows were identified for 7 drains ranging from 0.05 to 0.13 cubic meters per second. Drain sizes were then calculated based on total discharge, bed slope, flow section dimensions, and capacity.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    DESIGN OF DRAIN

    Input
    From Iso-Pluvial diagram of Raichur area (subzone-3h)
    max rainfall data for 24hr in 100 year= 160 mm (Ref Annex-1, Page no-)
    Converting this 100year 24hr rainfall for 2year return period 24hr rainfall
    = 160X0.39 = 62.4 mm (Ref Annex-1,
    page no- for coeff. Taken from SP42)
    Converting this 24hr rainfall into 1hr rainfall=
    = 62.4X0.39 = 24.336 mm/hr (Ref Annex-1,
    page no- for coeff. Taken from SP42)
    Time of concentration (Tc) calculation
    Farthest point from drain L = 400 m
    Slop conidered s = 1/250
    Therfore Tc = .02x(L)^0.77X(S)^-.383
    = 16.7 Min
    considering 15min for ease in calculation
    rainfall intensity corresponding to 15 min = 2.4 X 24.336 (Ref Annex-1, page no-
    = 58.4 mm/hr for coeff. Taken from SP42)

    RUNOFF CALCULATION (REF ANNEX-3 FOR AREA OF CATCHMENT MARKATION)


    Catchmen
    Drain t area Length Breadth Area Run off coe Run off
    L B A C Q=CiA
    m m SqM Cum/Sec
    D1 A1 100 75 7500 0.8 0.10
    D2 A2 200 50 10000 0.8 0.13
    D3 A3 100 50 5000 0.8 0.06
    D4 A4 100 40 4000 0.8 0.05
    D5 A5 150 50 7500 0.8 0.10
    D6 A6 100 50 5000 0.8 0.06
    D7 A7 100 100 10000 0.8 0.13

    DRAIN SIZE CALCULATION

    Total
    /Cummul
    ative Hydraulic Mannigs Drain Flow Excavatio Pipe
    Drain Section Discharge Bed Slope Flow Section Perimeter Area Radius coe No of pipes Capacity Remarks n backfill length
    Avg Width Avg Depth
    Q B (B) (D) P A R=A/P n n1 Qc
    xR^0.67xS^
    CuM m M M M SqM M 0.5
    D1 0.10 0.10 400 0.25 0.79 0.049063 0.0625 0.01 3 0.11 OK 158.24 145.5819 258
    D2 0.13 0.23 450 0.45 0.7 1.85 0.315 0.17027 0.015 0.30 OK 199.75
    D4 0.05 0.05 200 0.3 0.3 0.90 0.09 0.1 0.015 0.09 OK 61.95
    D4a 0.05 0.05 200 0.25 0.79 0.049063 0.0625 0.01 2 0.11 OK 6
    D4b 0.05 0.05 200 0.3 0.3 0.90 0.09 0.1 0.015 0.09 OK 10
    D3 0.05 0.12 200 0.3 0.4 1.10 0.12 0.109091 0.015 0.13 OK 75
    D5 0.10 0.10 200 0.3 0.4 1.10 0.12 0.109091 0.015 0.13 OK 58.5 7 16
    D6 0.06 0.06 150 0.3 0.3 0.90 0.09 0.1 0.015 0.10 OK 40
    D7 0.13 0.13 400 0.3 0.7 1.70 0.21 0.123529 0.015 0.17 OK 570 180
    D7a 0.13 0.13 400 0.4 1.26 0.1256 0.1 0.01 1 0.13 OK 1179.44 360
    16
    1.5625

    You might also like