COMMONLY USED MATERIAL

PRATIK KAPSE
Material Carbon Steel Stainless Steel (SS) Low Alloy steel (LAS) Low Temperature Carbon Codes NPS in OD in Piping Commodities
Steel(LTCS) Inch. MM
PIPES 1" 33.40 Bends / 2D/3D
A53 Gr.B (WELD/SMLS) * A312 Gr. TP 304 (SMLS/WELD) 1 ¼ Cr-1/2 Mo – A335 Gr.P11 * A333 Gr.6 (WELD/SMLS)
* ASME B36.10M 2" 60.30 Mitre Bends
A106 Gr.B (SMLS) ** A312 Gr. TP 316 (SMLS/WELD) 2 ¼ Cr- 1Mo – A335 Gr.P22 * A671 Gr.CC60 (EFW), 16” & above
* ASME B36.19M 3" 88.90 90 Elbow/1.5D
API 5L Gr.B (WELD/SMLS)*** A312 Gr. TP 321 (SMLS/WELD) 5Cr –1/2 Mo- A335 Gr.P5 *
* API 5L 4" 114.30 45 Elbow/1.5D
A672 Gr.B60 (WELD) 16” & above (SMLS-1/2”11/2”) (WELD 2”-6”) 9Cr – 1Mo – A335 Gr.P9 *
5" 141.30 Tee
* SMLS 6" 168.30 Reducer Conc.
*Class ‘D’ or General Category Fluids A358 Gr. TP 304/316/321 (8”- A691 Gr…..(EFW), High P&T,
14”) 16” & above (Write Cr& in blank
space) 8" 219.10 Reducer Eccentr.
**< 3.5 Kg/Cm2 & 350o C/M cat./Hazards A409 (14” and 30”) 10" 273.00 Reducing Elbow
***Cross country piping * Is welded without any filler
material 12" 323.80 180 U-Bend/ Return
If base material is containing Low carbon
write ‘L’ after Grade. 14" 355.60 Half coupling
FORGING 16" 406.40 Special Fittings:
Small bore fittings/ All O let A105 A 182 Gr.F304 (18Cr-8Ni) 1 ¼ Cr-1/2 Mo – A182 Gr.F11 A350 Gr.LF2 Class 1 & 2 ASME B16..11-Forged Fittings,
fittings/ Socket-welding and Threaded
18" 457.20 Socolet
Flanges / A 182 Gr.F316 (16Cr-12Ni-2Mo) 2 ¼ Cr- 1Mo – A182 Gr.F22
20" 508.00 Sweepolet
Small bore valves/ and Small A 182 Gr.F321 (18Cr-10Ni-Ti) 5Cr –1/2 Mo- A182 Gr.F5
bore Special Parts) 22" 558.80 Latrolet
If base material is containing Low 9Cr – 1Mo – A182 Gr.F9
carbon write ‘L’ after Grade.
24" 609.60 Elbow Let
WROUGHT 26" 660.40 Niplolet
FITTING A234 Gr. WPB (WELD/SMLS) A403 Gr.WP304 1 ¼ Cr-1/2 Mo – A234 Gr.WP A420 Gr.WPL-6 ASME B16.9-Wrought Fittings
11 Butt welding 28" 711.00 Weldolet
A403 Gr.WP316 2 ¼ Cr- 1Mo – A234 Gr.WP 22 ASME B16.48- Steel Line blanks
30" 762.00 Threadolet
A403 Gr.WP321 5Cr –1/2 Mo- A234 Gr.WP 5 32" 813.00 Flanges
If base material is containing Low 9Cr – 1Mo – A234 Gr.WP 9
carbon write ‘L’ after Grade.
34" 864.00 ASME 16.5 Flanges Upto26"
36" 914.00 ASME 16.47 Flanges Above26"
CASTING A216 Gr.WCB A351 Gr.CF8 (SS 304) 1 ¼ Cr-1/2 Mo – A217 Gr.WC6 A352 Gr.LCB
38" 965.00 AWWA Flanges 48" to 60"
(Large bore Valves and A351 Gr.CF8M (SS 316) 2 ¼ Cr- 1Mo – A217 Gr..WC9
Special Parts) 40" 1,016.00 Spectacle Blind/Plate
A351 Gr.CF8C (SS 321) 5Cr –1/2 Mo- A217 Gr.C 5 42" 1,067.00 Special Items
If base material is containing Low 9Cr – 1Mo – A217 Gr.C 12
carbon use CF3 44" 1,118.00 Spray Nozzle
PLATES 46" 1,068.00 Repture disc
A515 Gr.60 A240 Gr.304 1 ¼ Cr-1/2 Mo – A387 Gr. 11 A516 Gr.60
C1.1 48" 1,219.00 Sigh glass
A240 Gr.316 2 ¼ Cr- 1Mo – A387 Gr.22
C1.1 50" 1,270.00 Sampling cooler
A240 Gr.321 5Cr –1/2 Mo- A387 Gr.5 C1.1 52" 1,321.00 Safety shower
9Cr – 1Mo – A387 Gr.9 C1.1 54" 1,372.00 Eye washer
If base material is containing Low carbon
write ‘L’ after Grade. 56" 1,422.00 Gaskets
BOLTS & NUTS 58" 1,473.00 Metallic-ASME 16.20
A193 Gr.B7/A194 Gr.2H A193 Gr.B8 Class II /A194 Gr.8 A193 Gr.B16 / A194 Gr.4 A320 Gr.L7 ASME B 18.2.1 60" 1,524.00 Non Metallic-ASME 16.21
A307 Gr.B / A563 Gr.A A325 ASME B 18.2.2 62" 1,574.80
64" 1,625.60
66" 1,676.40
68" 1,727.20
70" 1,778.00
72" 1,828.80
74" 1,879.60
76" 1,930.40
78" 1,981.20

500187896.xls