Components of Computer System: Input, Output, Processor and Storage
Components of Computer System: Input, Output, Processor and Storage
INSTALL
Register Login
Components of Computer
System: Input, output, Processor
and Storage
Subject: Computer Science
Syllabus
Lessons
Operating System
Application Package
Introduction to Computer
Computer System
Memory (i)
Memory
Microprocessor
Memory (ii)
Input Devices
Interfaces
Output Devices
Register Login
Tu es célibataire?
Le Site de rencontre N°1 en Afrique
INSTALL
Overview
INSTALL
This note contain about the component of computer system and their function. It also contain the different unit that work together to
perform the given task. It also describes about the different components of the computer that helps in storage, processing and
providing the desired results to the users.
COMPONENTS OF COMPUTERSYSTEM
The computer is a device that operated upon information or data. It is an electronic device which accepts inputs data, stores the data,
does arithmetic and logic operations and provides the outputs in the desired format. The computer receives data, process it, produces
output and stores it for further references. So, a computer should have at least four major components to perform these tasks. A block
diagram of the basic computer organization has the following functional units.
Register Login
Fig: Block diagram of computer architecture
(Source:www. nal-yearproject.com)
Input Unit
The input unit is formed by the input devices attached to the computer. Input devices are used to interact with a computer system or
used enter data and instructions to the computer. These devices convert input data and instructions into a suitable binary form such as
ASCII, which can be acceptable by the computer. In brief, an input unit performs the following function:
OPEN
✕
Register Login
Koober
L' apprentissage de demain
INSTALL
Memory Unit
This unit is also called storage unit. The data and instructions, which are entered through an input unit must be stored on the computer
before the actual processing starts. The result produces by the computer after processing is also kept somewhere before passed to the
output units. If intermediate results are produced during processing, it should be stored in somewhere in memory. The storage unit of a
computer performs all these needs. In brief, the speci c functions performed by the storage unit are as follow:
It stored data and instructions, which are entered through input devices.
It stores an intermediate result of processing.
It stores the nal result of processing before these results are passed to an output device.
The storage unit of computers consists of two types of memory or storage: primary and secondary storage:
i. Primary Storage
Memory storage that communicates directly with CPU is called main memory. It enables the computer to store, at least temporarily
data and instruction. It is mainly used to hold data and instructions and as well as the intermediate result of processing which the
computer system is currently working on. Primary memory is volatile, that is, it lose its content when power supply is off. The Random
access memory (RAM) is an example of a primary to main memory.
Auxiliary storage is also known as secondary storage. It is the memory that supplements the main memory. These are a non-volatile
memory. It is mainly used to transfer data to program from one computer to another computer. There is high capacity storage devices
used to store data and program permanently. These are also used as backup devices which allows to store the valuable information as
backup on which you are working on. The examples of secondary memory are Magnetic Disk, Optical disk, etc.
main function is run the program by fetching instructions from the RAM, evaluating and executing them in sequence. In summary, the
function of CPU are as follow:
The CPU has three components responsible for different function, these components are Control units, arithmetic-logical unit (ALU)
and Register.
Register Login
(Source: willwhitlock10n5.blogspot.com)
Control Unit
The control unit provides the necessary timing and control signals to all the operations on the computer. It controls the ow of data
between the CPU, memory and peripherals. It also controls the entire operation of a computer. It obtains the instructions from the
program stored in the main memory, interprets the instructions and issues the signals, which cause the other units of the system to
execute them. So, it is considered as a central nervous system of a computer that provides status, control and timing signals necessary
for the operation of other parts of CPU, memory and I/O devices. The main functions of control units are given below:
It performs the data processing operations with the aid of program prepared by the user and send control signals to various parts of
the computer system.
It gives commands to transfer data from the input devices to the memory to an arithmetic logic unit.
It also transfers the results from ALU to the memory and then to the output devices.
It stores a program in the memory.
It fetches the required instruction from the main storage and decode each instruction and hence execute them in sequence.
The logical operations of ALU give the computer the decision-making ability.
Registers
Registers are the high-speed temporary storage locations in the CPU made from electronic devices such as transistors, ip- ops, etc.
So, registers can be thought as CPU’s working memory. Register are primarily used to store data temporarily during the execution of a
program and are accessible to the user through instructions. These are the part of Control unit and ALU rather than of memory. Hence,
their contents can be handled much faster than the contents of memory. Although the number of registers varies from computer to
computer. There are some registers which are common to all computers. Five registers that are essential for instruction execution are:
Program Counter (PC): Contains the address of the next instruction to be fetched.
Instruction Register (IR): Contains the instruction most recently fetched.
Memory Address registers (MAR): Contain the address of a location in memory for read and write operation.
Memory Buffer Register (MBR): It contains the value to be stored in memory or the last value read from memory.
Accumulator (ACC): An accumulator is a general purpose register used for storing temporary result and result produced by the
arithmetic logic unit.
Output Unit
The output unit is formed by the output devices attached to the computer. Output devices are used to present result produced by the
computer to the users. The output from the computer is in the form electric signals, which is then converted into human
understandable form into human readable form.
The examples of output devices are the monitor, printer and speaker.
✕
Register Login
Accepts the result produced by the computer which is in electric binary signals.
It then converts the result into human readable form.
Finally, it supplied the converted results to the outside word.
We can also discuss some of the categories of a computer system. Some of the categories of computer system are:
Hardware
Software
Data or information
Procedure (data which the computer converts)
User
Communication
1. Hardware
Hardware refers to the part of the computer which we can touch. It is the physical devices of the computer. It consists of
interconnected electronic equipment that controls everything the computer does. It includes input devices, input devices, output
devices, processing devices and storage devices. Example of hardware are keyboard, monitor, CPU, hard disk and RAM.
2. Software
The software is the term used to describe the instruction that tells the hardware, what and how to perform a task. Without software,
the hardware is useless. Examples of software are Window 7, MS of ce, Internet explorer, etc.
3. Data/Information
The function of a computer system is to convert data into information. Data can be considered as the raw facts whether in a paper,
electronic or the other form that is processed by the computer. In other words , data consist of the raw facts and gures that are
processed to form information. Information is summarized data or manipulated or processed data.
4. People
People constitute the most important parts of the computer system. People operate the computer hardware and create the computer
software. They also follow a certain procedure when using the hardware and software.
5. Procedure
The procedure is a description of how things are done, step for accomplishing a result. Procedure for a computer system appears in
documentation manual, also known as reference manual which contains instruction, rules, and guidelines to follow when using
hardware and software. When you buy a microcomputer or software package, it comes with one or more documentation manuals.
6. Communication
When one computer system is set up to share data and information electronically with another computer system, communication
becomes a system element. In other words, the manner on which the various individual system are connected by wires, cables, phone
lines, microwave, Wi-Fi or satellite is an element of the total computer system.
(Dilli , 2015)
Bibliography
Dilli , S. P., Singh, k. E., Khadka , D., Bhatta, K. D., Baral, N., Saud, R. S., . Dangi, R. (2015). Fundamental of Computer Science.
Kathmandu: KEC publication and Distribution.
Enter your keywords Search Results
Enter your keywords Search Results
Adhikari,Deepak et.al.,Compute Science-XI,Asia Publication Pvt.Ltd,ktm
Register Login
Note Things to remember
Kullabs.
Stay connected with Kullabs. You can nd us in almost every social media platforms.
Register Login
About us Terms of Services Sign up and receive the latest tips via
email.
Blog Privacy Policy
Your email :
Subscribe