HVAC Drives Cross Reference Quick Guide

June 2, 2011

Purpose

The purpose of this document is to provide a resource to aid in cross referencing between generations of
ABB HVAC drives. The document essentially dissects the model numbers for the ACH500, the ACH400,
and finally the ACH550. Also included are the part numbers associated with ABB’s bypass offerings, and
commonly used plus codes.

Part I – ACH500

Base drive model number description:

Part I – ACH500 continued…

Drive with bypass model number description:

Part I – ACH500 continued…

Drive with MINI bypass model number description:

Part II – ACH400

Base drive & drive with bypass model number description:

(Note: power rating in kVA for the ACH400)
Part II – ACH400 continued…

Since the ACH400 P/N is based on kVA, included here is a list of the configuration codes and the
associated HP ratings for both 230 & 480V class drives:

230VAC:

480VAC:
Part III – ACH550

Base drive & drive with bypass model number description:

Part IV – Commonly Used Plus Codes (options)

ABB plus codes are alpha-numeric in nature, e.g. +B055. The letter indicates the category for the plus
code. In the +B055 example, the ‘B’ indicates that the plus code group is defined as protection class (i.e.
NEMA/UL environmental ratings), and the number is simply an incremental digit that is assigned to the
specific option. In this case the 055 indicates UL TYPE 12 / IP54 / NEMA 12. The list below is broken up by
plus code group with all associated options in that group. One point that needs to be recognized is that
these codes span across multiple drive models, and should not be used for ordering, only as reference.

A – Input Bridge:

+A001 DC-input
+A002 1 phase Diode Bridge
+A003 3 phase Diode Bridge
+A004 12-pulse Diode Bridge
+A005 18-pulse Diode Bridge
+A006 24-pulse Diode Bridge
+A007 1 phase Thyristor Bridge
+A008 3 phase Thyristor Bridge
+A009 12-pulse Thyristor Bridge
+A010 12-pulse Regenerative Thyristor Bridge
+A011 PWM Input Bridge
+A012 Supply Frequency 50 Hz
+A013 Supply Frequency 60 Hz
+A014 Supply Frequency 50/60 Hz
+A015 TN network
+A016 TN-S Network
+A017 IT- Network
+A018 Half controlled diode bridge

B – Protection Class:

+B050 IP00, open chassis

+B051 IP20, finger safe
+B052 IP21, UL type 1, NEMA 1
+B053 IP22, UL type 1, NEMA 1
+B054 IP42, UL type 1, NEMA 1
+B055 IP54, UL type 12, NEMA12
+B056 IP55, UL type 12, NEMA12
+B057 IP65, UL Type 4, NEMA4
+B058 UL Type 3R, NEMA 3R
+B059 IP54R
+B060 Prevention of unintentional touching
+B061 IP20 / NEMA1
+B062 IP32
+B063 IP66
C – Construction:

+C100 Floor Enclosure

+C101 Floor Enclosure + 600 mm
+C102 Floor Enclosure + 800 mm
+C103 Micro Enclosure
+C104 Option Pack
+C105 Add-A-Box
+C106 MCC Sectional Unit, Allen Bradley Bulletin 2100 Centerline
+C107 Wall Mounted
+C108 Cabinet Installed
+C109 Free Standing
+C110 Option box on top
+C111 Enclosure extension
C112 was "no enclosure extension", the code is now 0C111. "no" - option codes are not
+C112 used anymore.
+C113 Lower Unit
+C114 Pad Mounting Legs
+C115 3 Point Latch
+C116 3 Point Latch Handle Guard
+C117 Inner Swing Panel
+C118 Outer Door Cover
+C119 Solid Door
+C120 Tamperproof Hardware
+C121 Marine construction
+C122 Horizontal mounting
+C123 Control board heating
+C124 Control board cooling 1
+C125 Control board cooling 2
+C126 Speed controlled cooling fan
+C127 Enclosure extension with UL/CSA components
+C128 Air inlet through bottom
+C129 UL approved components
+C130 Air outlet duct connection
+C131 Vibration dampers
+C132 Marine type approved
+C133 Marine type top and floor fixing
+C134 CSA approved components
+C135 Flange mounting
+C136 OEM configuration 1
+C137 Fan on off control
+C138 Liquid cooling unit , line up connected
+C139 Liquid cooling unit , stand alone
+C140 Single pump
+C141 Redundant pump
+C142 Pipe connection on bottom
+C143 Pipe connection on right
+C144 Pipe connection on left
+C145 ANSI flanges
+C146 Sea water heat exchanger
 +C147 3-way valve
+C148 Pipe connection on right (slave unit)
+C149 Pipe connection on left (slave unit)
+C160 Back to back installation
+C161 Removable doors
+C162 Empty cabinet on left
+C163 Empty cabinet on right
+C164 Plinth for the cabinet
+C165 Stainless steel enclosure
+C166 Hinged door
+C167 Pipe connection without thread
+C168 Control unit cover
+C169 Pressure relief valve
+C170 Redundant Drive Package

D – Resistor Braking:

+D150 Braking Chopper type 1

+D151 Braking Resistor
+D152 Braking Chopper type 2
+D153 Braking Chopper type 3

E – Filters:

+E200 EMC/RFI-filters, 2nd Environment, Unrestricted (Earthed Network)

+E201 EMC/RFI-filters, 2nd Environment, Unrestricted (Unearthed Network)
+E202 EMC/RFI-filters, 1st Environment, Restricted (A-limits, Earthed Network)
+E203 EMC/RFI-filters, 1st Environment, Restricted (A-limits, Unearthed Network)
+E204 dU/dt Limitation, Type 1 (by Gate Drivers)
+E205 dU/dt Limitation, Type 2 (by Choke)
+E206 Sine Output Filter
+E207 5% Line Impedance
+E208 Common Mode Filter
+E209 Common Mode Filter (Light)
+E210 EMC/RFI-filters, 2nd Environment, Unrestricted (Earthed/Unearthed Network)
+E211 Input Harmonic Filter
+E212 Film capacitors
+E213 AC Line Reactor for an Option Configuration

F – Line Options:

+F250 Line Contactor

+F251 gG Line Fuses
+F252 Terminal Block
+F253 Door Interlock Disconnect Switch
+F254 Door Interlock Disconnect Fuse Switch
+F255 Door Interlock Circuit Breaker (Standard Rated KAIC)
 +F256 Door Interlock Circuit Breaker (65 KAIC)
+F257 Flange Mounted Door Interlock Circuit Breaker (Standard Rated KAIC)
+F258 Flange Mounted Door Interlock Circuit Breaker (65 KAIC)
+F259 Earthing Switch
+F260 aR Line Fuses (semiconductor fuses)
+F261 Surge Arrestor - Low Energy Rating
+F262 Surge Arrestor - Medium Energy Rating
+F263 Surge Arrestor - High Energy Rating
+F264 Surge Arrestor - Highest Energy Rating
+F265 Input Isolation Transformer
+F266 DC Switch fuse
+F267 Service switch
+F268 Common DC Switch fuse
+F269 Output contactor
+F270 Output earthing switch
+F271 Output earthing terminals
+F272 Internal charging
+F273 No charging circuit
+F274 100kA Short Circuit rating
+F275 Wind turbine power cabinet
+F276 Ride through
+F277 Flange Mounted Operating Mechanism for Main Disconnect Means
+F278 Drive main switch
+F279 Overvoltage protection - supply and generator side
+F280 Overvoltage protection - supply side
+F281 Overvoltage protection - generator side

G – Cabinet Options:

+G300 Cabinet Heater

+G301 Cabinet Lighting
+G302 Hand - Off - Auto Switch
+G303 Speed Potentiometer
+G304 115 VAC Control Transformer
+G305 115 VAC Control Transformer + 200 VA Extra
+G306 115 VAC Control Transformer + 350 VA Extra
+G307 Terminals for External 230/115 VAC Control Voltage
+G308 Two Motor Select with Auto and Manual Switchover
+G309 Electronic Bypass
+G310 Manual Bypass with Selector Switch & Interlock
+G311 Auto Bypass with Selector Switch
+G312 Air filters
+G313 Output for Motor Heater
+G314 Aluminium DC Busbars
+G315 Tin Plated Copper DC Busbars
+G316 Cable Supply Conductors
+G317 Busbar Supply Conductors
+G318 Power supply for control board from internal 230/115 VAC
+G319 Dual Motor
+G320 230 VAC Control Transformer
+G321 230 VAC Control Transformer + 200 VA Extra
+G322 230 VAC Control Transformer + 350 VA Extra
+G323 Cabinet Heater - Cold Weather
+G324 115vac Receptacle - US Style
+G325 Start/Stop Selector Switch
+G326 Auto Bypass - External
+G327 Ready Pilot Light
+G328 Run Pilot Light
+G329 Fault Pilot Light
+G330 Halogen free wiring
+G331 E-stop push button on door
+G332 Electrical Disconnect push button
+G333 kW meter on door
+G334 Voltmeter with selector switch
+G335 Current meter
+G336 Arc monitoring
+G337 Arc monitoring with current sensing unit
+G338 Wire marking class A1
+G339 Class A2, equipment and terminal block pin numbers printed on conductors
+G340 Class A3, like A2 but marking by rings
+G341 Class B1, equipment and terminal block pin numbers and equipment Ids marked by rings
+G342 Class C1, like B1 but remote end address is also marked
+G343 Corrosion indicator
+G344 Auxiliary transformer
+G345 Cabinet dehumidification
+G346 Off-load reconfiguration
+G347 On-load reconfiguration
+G348 Double winding control
+G349 Damper control for classic bypass
+G390 Soft start in bypass
+G391 Special nameplate1
+G392 External fault pilot light
+G393 Elapsed time meter
+G394 3 phase voltage monitor
+G395 Common start for bypass packages
+G396 Auxiliary power supply, size 1
+G397 Auxiliary power supply, size 2
+G398 Auxiliary power supply, size 3
+G399 Auxiliary power supply, size 4
+G400 Special sealing
+G401 Start/Stop Push Buttons
+G402 Fireman´s override
+G403 Power On pilot light
+G404 Reset button
+G405 Multiple Motors (MMPs)
H – Cabling:

+H350 Bottom Entry

+H351 Top Entry
+H352 Bottom Exit
+H353 Top Exit
+H354 Cabling pedestal
+H355 Vertical motor cable connection busbars
+H356 DC cable connection busbars
+H357 Cable Lead Through Entry (European)
+H358 Cable Conduit Entry 1
+H359 Common Motor Terminal Cubicle
+H360 Flat type (side against wall) cabling pedestal
+H361 External Junction Box
+H362 Vertical DC cable connection busbars
+H363 DC and braking chopper outputs on different sides
+H364 Cable Conduit Entry 2
+H365 Cable Conduit Entry 3
+H366 Common output terminal
+H367 Control cable bottom entry / exit
+H368 Control cable top entry / exit
+H369 Common input terminal cubicle
+H370 Cable size 1
+H371 Cable size 2
+H372 Cable size 3
+H373 Cable size 4
+H374 Cable size 5
+H375 Cable size 6
+H376 Cable gland kit

J – Keypad Options

+J400 Control Panel

+J401 Drive Monitoring Display
+J402 Potentiometer
+J404 Basic Control Panel
+J406 Data Logger w/display and Mouse
+J407 Data Logger w/o Display
+J408 Data Logger-to-External PC Port
+J409 Control panel cable (1 m)
+J410 Control panel mounting platform 1
+J411 Remote supply control
+J412 Common control panel
+J413 Control panel mounting platform 2
+J414 Control panel mounting platform 3
+J415 OEM control panel 1
+J416 Control panel, language group 1
+J417 OEM control panel 2
 +J418 OEM control panel 3
+J419 Installed window kit for control panel
+J420 OEM control panel 4

K – Fieldbus Options:

+K450 Panel Bus Connection Interface

+K451 DeviceNet
+K452 LONWORKS
+K453 InterBUS-S
+K454 PROFIBUS DP
+K455 Modbus Plus
+K456 AF100
+K457 CANopen
+K458 Modbus
+K459 CS-31
+K460 FLN Landis&Staefa (Siemens)
+K461 N2 Johnson Controls
+K462 Control Net
+K464 Ethernet Remote diagnostics)
+K465 Building Automation Control Network (Bacnet before it was embedded)
+K466 Ethernet (Modbus/TCP,EtherNet/IP)
+K467 Ethernet (Modbus/TCP,Profinet)
+K468 Modbus OEM version

L – I/O Options:

+L500 Analog I/O Extension

+L501 Digital I/O Extension
+L502 HTL Pulse Encoder
+L503 DDCS Communication 3
+L504 Additional IO-Terminal Block
+L505 Thermistor Relay
+L506 PT100 Relay
+L507 115 VAC Input
+L508 DDCS Communication 1
+L509 DDCS Communication 2
+L510 Namur I/O
+L511 Relay output extension
+L512 115/230 V Digital input
+L513 ATEX Certified PTC interface
+L514 ATEX Certified PT100 interface
+L515 I/O extension adapter
+L516 Resolver
+L517 TTL Pulse Encoder
+L518 Absolute encoder
 +L519 Analog /digital I/O Extension
M – Starter for Aux Motor Fan Options:

+M600 1...1,6 A IEC

+M601 1,6...2,5 A
+M602 2,5...4 A
+M603 4...6,3 A
+M604 6,3...10 A
+M605 10...16 A
+M606 16…25 A
+M607 22...32A
+M608 28...40 A
+M609 40...50 A
+M611 4.74 to 5.21 Class 20
+M612 6.96 to 8.09
+M613 10.5 to 10.9
+M614 12.1 to 14.5
+M615 14.6 to 16.8
+M616 16.9 to 18.4
+M617 18.5 to 20.9
+M618 22.6 to 24.3
+M619 24.4 to 27.2
+M620 29.3 to 32.0
+M621 32.1 to 34.9
+M622 35.0 to 37.8
+M623 37.9 to 41.7
+M624 46.0 to 49.0
+M625 49.1 to 54.2
+M626 57.1 to 62.8
+M627 62.9 to 69.1
+M628 75.1 to 83.3
+M629 93.0 to 100
+M630 114 to 125.9
+M631 139 to 153
+M632 164 to 180
+M633 Motor in delta connection
+M634 Motor in star connection

N – Software Options:

+N650 Pump and Fan Control (PFC)

+N651 Master-Follower
+N652 Crane Drive Control
+N653 Application Program Template
+N654 Spinning Control
+N655 PCP for Oil Industry
+N656 Rod Pump for Oil Industry
+N657 Injection Molding
+N658 P-Jump, Thread Bobbin Winding
+N659 Lead Section
+N660 Inline - Draw / Dancer / Tension / Load Share
+N661 Center Winder - Unwind
+N662 External Control - Speed / Torque Slave
+N663 Industrial Control
+N664 Standard
+N665 Standard (US)
+N666 Extruder Control
+N667 Decanter Control
+N668 Traverse Control
+N669 Centrifuge Control
+N670 Step up/Sine Filter Application
+N671 System Application
+N672 OEM Crane Control
+N673 Special
+N674 ESP for Oil Industry
+N675 Rod Pump Lite for Oil Industry
+N676 Methane for Gas Industry
+N677 PMSM control - system application
+N678 Dynamometer (Test Stand)
+N679 PMSM - STD
+N680 PMSM - External Control
+N681 OEM Slew control
+N682 Multiblock
+N683 OEM Bowl control
+N684 OEM Scroll control
+N685 Motion Control
+N686 OEM Standard control 1
+N687 Pump control
+N688 Korea OEM version 1 (50 Hz limit)
+N689 Korea OEM version 2 (55 Hz limit)
+N690 OEM special software1
+N691 OEM Pump software
+N692 China Pump control
+N693 OEM software 6? (ITT)
+N694 IGBT supply control
+N695 OEM rolling mill control
+N696 OEM second torque estimate application
+N697 Crane Control (basic)
+N698 Winch control
+N699 OEM software (Automatic systems)
+N800 OEM software (Marley)
+N801 OEM software (Wolffkran 1)
+N802 OEM software (Wolffkran 2)
+N803 OEM software (Wolffkran 3)
+N804 OEM software (Wolffkran 4)
+N805 OEM software (Wolffkran 5)
+N806 OEM software (Wolffkran 6)
P – Specialty Options:

+P901 Coated Boards

+P902 Customised (Described in Technical appendix)
+P903 Blank Package
+P904 Extended Warranty 1
+P905 Control Board Inside Converter Module
+P906 Control Board Outside Converter Module
+P907 Cabinet mounting kit
+P908 Preasembled drive
+P909 Extended Warranty 2
+P910 Service plan 1
+P911 Service plan 2
+P912 Seaworthy packing
+P913 Special colour
+P914 Custom specific documentation
+P915 Service plan 3
+P916 Distance cost
+P917 Enclosed Retrofits
+P918 Assembled in USA
+P919 Option configuartion 1
+P920 Service plan 4
+P921 Special ambient conditions
+P922 Module for ABB cabinet assembly

R – Documentation Language Options:

+R700 English
+R701 German
+R702 Italian
+R703 Dutch
+R704 Danish
+R705 Swedish
+R706 Finnish
+R707 French
+R708 Spanish
+R709 Portuguese (spoken in Portugal)
+R710 Portuguese (spoken in Brazil)
+R711 Russian
+R712 Chinese
+R713 Polish
+R714 Turkish
+R715 Documentation
+R720 Customer specific manual English
+R721 Customer specific manual German
+R722 Customer specific manual Italian
+R723 Customer specific manual Dutch
 +R724 Customer specific manual Danish
+R725 Customer specific manual Swedish
+R726 Customer specific manual Finnish
+R727 Customer specific manual French
+R728 Customer specific manual Spanish
+R729 Customer specific manual Portuguese (spoken in Portugal)
+R730 Customer specific manual Portuguese (spoken in Brazil)
+R731 Customer specific manual Russian
+R732 Customer specific manual Chinese
+R733 Customer specific manual Polish
+R734 Customer specific manual Turkish
+R735 Customer specific manual Norwegian

Q – Safety Feature Options:

+Q950 STO Safe torque off

+Q951 Emergency Stop, stop cat.0 with main contactor/breaker
+Q952 Emergency Stop, stop cat.1 with main contactor/breaker
+Q953 Earth Fault Monitoring, Earthed Mains
+Q954 Earth Fault Monitoring, Unearthed Mains
+Q955 Remote Run Enable
+Q956 Local Run Enable
+Q957 Safety relay for prevention of unexpected startup
+Q958 Quick Preventation of Unexpected Startup
+Q959 Tripping push button for external breaker
+Q960 Tripping push button for internal breaker
+Q961 Safety category 3
+Q962 Safety category 1
+Q963 Emergency Stop, stop cat.0 without main contactor/breaker
+Q964 Emergency Stop, stop cat.1 without main contactor/breaker
+Q965 SLS Safely limited speed

V – Version:

+V991 Version 1
+V992 Version 2
+V993 Version 3
+V994 Refurbished

X – OEM Specific Options:

+X1001 Brake control unit (standard)

+X1002 Brake control unit (boost)
+X1003 Acum brake control connection
+X1004 Rope gripper
+X1005 Medium distance cabling for braking
+X1006 Long distance braking cabling for braking
+X1007 Medium distance cabling for automation system
+X1008 Long distance cabling for automation system
+X1009 Delivery terms 1
+X1010 Delivery terms 2
+X1011 Delivery terms 3
+X1012 Carrier Factory Bypass
+X1013 Carrier Factory Disconnect
+X1014 Carrier Field Bypass
+X1015 Carrier Field Disconnect
+X1016 Trane T-Series, CB, 100
+X1017 Trane T-Series, CB, 500
+X1018 Trane T-Series, CB, 2000
+X1019 Trane T-Series, CB, 100, NFD
+X1020 Trane T-Series, CB, 500, NFD
+X1021 Trane T-Series, CB, 2000, NFD
+X1022 Trane T-Series Bypass, CB, 100
+X1023 Trane T-Series Bypass, CB, 500
+X1024 Trane T-Series Bypass, CB, 2000
+X1025 Trane T-Series Bypass, CB, 100, NFD
+X1026 Trane T-Series Bypass, CB, 500, NFD
+X1027 Trane T-Series Bypass, CB, 2000, NFD
+X1469 Trane Custom AHU (Panel size 1, 1-5HP with bypass)
+X1470 Trane Custom AHU (Panel size 2, 7.5-10HP with bypass)
+X1471 Trane Custom AHU (Panel size 3, 10-20HP with bypass)
+X1472 Trane Custom AHU (Panel size 4, 20-40HP with bypass)
+X1473 Trane Custom AHU (Panel size 5, 30-125HP with bypass)
+X1474 Trane Custom AHU (Panel size 1, 1-5HP without bypass)
+X1475 Trane Custom AHU (Panel size 2, 7.5-10HP without bypass)
+X1476 Trane Custom AHU (Panel size 3, 10-20HP without bypass)
+X1477 Trane Custom AHU (Panel size 4, 20-40HP without bypass)
+X1478 Trane Custom AHU (Panel size 5, 30-125HP without bypass)
+X1492 Trane VFD Panel CV (without bypass)
+X1493 Trane VFD Panel CV (without bypass)
+X1494 Trane VFD Panel CV (without bypass)
+X1495 Trane VFD Panel CV (with bypass)
+X1496 Trane VFD Panel CV (with bypass)
+X1497 Trane VFD Panel CV (with bypass)
+X1498 Trane VFD Panel CV (with bypass)