MSDS of Yugcol Ultra

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

YUGCOL-ULTRA

Conform to D3 (BS.EN. 204) structure of Europe

Introduction

PVAC adhesives have become one of the most important adhesives in


wood working industry several different approaches have been taken to
improve the moisture and heat resistance of PVAC .Wood adhesives, to
meet the European standards of non structural wood adhesives
(BS.EN.204) or D3 standard. Now YUG COL -ULTRA conforms the
D3 (BS.EN.204) standards of Europe.

Technical details
Characteristics:

YUG COL- ULTRA is aqueous polyvinyl acetate dispersion with cross


linking properties and stabilization with polyvinyl alcohol.

Specifications:

These technical data are determined for each lot before its release by our
quality control

Presents in YUG COL- ULTRA

(1) Solid contents 56% ±1

(2) Actives 52% ±1

(3) PH value 5.5 ± 0.5

(4) Density 1.1 ± 0.02

(5) Viscosity 100 to 200 poises


(BF viscometer RVT spindles no.
6/20 RPM) at 30ºc
(6) Open time 5 to 10 minutes
(At room temperature &
200 micron film thickness)

(7) Bond strength (bonding beyond this wood breaks but bond
strength with load more doesn’t break
the 295 Kg)

(8) Rapid setting (Bonding) 30 minutes ± 5´ for 40% strength


2 hours ±10´ for 60% strength

3 hours ±10´ for 80% strength

6 hours ±15´ for 90% strength

24 hours ±30´ for 100% strength

(9) Water resistant

(a) Keeping joint in cold water (or room temp) for 6 to 12 hrs,
take out and dry again, the joint strength will remain almost
same.

(b) Keeping joint in hot water (temp up to 80ºc) for 1 to 2 hrs,


take out and dry again, the joint strength will remain almost
same.

(10) Coating weight and film thickness 120gm to 180 gm per m²

(11) Dispersion particles size 2µm app.

(12) Min film forming temperature app. 4ºc

(13) Film appearance slightly opaque

(14) Shelf life best use before 6 months


Applications
YUG COL- ULTRA is qualified for water resistant and heat resistant
wood glue .The dispersion exhibits a rapid increase in bond strength
when pressed at temperature higher then 20ºc. YUG COL- ULTRA on
hot press application shows accelerated increase of bond strength, making
it most suitable for the short contact lamination of panels with laminate
sheet finishing and for best forming finishes of panel edges and profiles.
YUG COL- ULTRA also gives excellent bonding
strength to wood joining .It’s bonds exhibits and outstanding heat and
water resistant.

Preservation and storage

YUG COL- ULTRA contains some initial preservatives and sufficiently


protected against micro organism during further storage. It should be
stored for no longer then 6 months at temperature as 5º to 45º c and must
be protected from direct exposure to sunlight and frost. It should be
ensured that at open drums should always be tightly closed.
Technical data ascertained by our laboratory at the time of
product may vary with storage time and conditions and may deviate from
stated limits, especially after longer storage time, increase in viscosity
may be observed

Safety and environment protection

YUG COL- ULTRA isn’t a hazardous substance or preparation with in


the meaning of the current hazardous material regulations.

Note: This information is based on our present state of knowledge and is


indented to provide general notes on our product and their usage, which
we believe but no guaranty and no warranty of any kind is made with
respect there to.

You might also like