Paglierani Fill and Seal Packer ORT1200 Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

ORT 1200

HORIZONTAL FORM, FILL & SEAL PACKER


Horizontal form, fill and seal machine model “ORT 1200”.
The horizontal form, fill & seal packer mod. ORT 1200 has hollowed-out rounded steel to guard against dust which can be easily positioned at will. A lengthways The PLC controlled electrical cabinet is extremely user-
been born after years of experience gained by PAGLIERANI in accumulation and the electrical cables and pneumatic piping moving blade cuts the sack, thus eliminating the need for a friendly. In fact it is neatly housed inside the main structure
this field. An extremely compact and reliable machine, the ORT are neatly housed inside the frame (thus protecting them from specially-designed blade which may be difficult to procure. The and “slides out” when necessary. Furthermore the ORT 1200
1200 offers high output capacity and is the ideal instrument abrasive chemical agents and/or accidental breakages). The actions of filling and of cooling the bag seals are done in five is fitted with a take-off conveyor for the full bags complete
when dealing with difficult, heavy-duty applications. The film unwinding device, carried out by a simple pneumatically- stations, each one of which undergoes rigorous monitoring. The with tipping device. In an overall length of just 4.5 metres,
machine is able to handle any type of granular, free-flowing operated dancing roller, eliminates any risks or sealing is carried out by heated bars, at a constant all the various operations are completed and the formed, filled
product: plastic pellets, fertilizer, salt, granular minerals, inert problems that could arise out of using motorised devices. temperature, offering the possibility to vary the height and to & sealed sacks are ready to be either automatically palletised,
products etc. The sturdy body frame is made from special Increased practicality also for the pneumatic perforator, realise numerous profiles: low, high, double, multi-line, labyrinth. or to be loaded into trucks, railway wagons or containers.

HIGH PRODUCTION OUTPUTS.

SAFETY AND RELIABILITY..

FAST AND EFFICIENT.

PRACTICAL AND COST-EFFECTIVE.


UNWINDING. PERFORATION. FORMING. FILLING. TRANSFER.
Done by a pneumatically-actioned Carried out by a pneumatic perforator Bag length is controlled by encoder Is controlled by sensors which activate the This is achieved thanks to the perfect
dancing roller. More practical and far having dimensions and adjustable (optional - photocell reading for print filling process only if a bag is properly synchronization between the clamps
more reliable than a traditional position based on the specific middling). Thermostat-controlled heat opened and positioned correctly (which hold the bag mouth) and the
peripheral motorised roller. application. sealing bars for bag bottom closing. underneath the filling spout. The filling conveyor belt (which supports the bag
Lengthways blade for a fast and spout is of the “duck beak” type. bottom). The step-by-step movement is
accurate cut. obtained through a single pneumatic
actuator, both for the horizontal
movement of the clamps as well as the
forwards motion of the conveyor belt.

PERFORATION

TRANSFER

LOADING. SEALING.
IThe machine takes a reel having a Done with thermostat-controlled heat
diameter of 1200 mm changeover is sealing bars. Thanks to the technology
simple and quick (approx. 15 mins.). adopted, it’s possible to select the
LOADING height, profile & position of the
UNWINDING sealing level. Protection is achieved
both by heat-applicable amounts of
teflon (directly on the bars), as well
as with film (easily replaceable)

ORT 1200
FORMING

COOLING
SEALING
FILLING

COOLING.
Achieved by means of an electric fan
for a gradual cooling and removing
the need for parts to be fitted in the
sealing zone. The consumption of
compressed air is also reduced.
OPTIONALS.

ELECTRICAL CABINET. PC CONTROL.


The ORT 1200 is fitted with an All of the various phases can be controlled and
on-board electrical cabinet already monitored by a PC. By doing this, it’s possible to
wired-up. It is extremely user-friendly register and verify, step-by-step, the status of each
and its unique design allows it individual operation and the final productive
to slide in and out of its central results as a whole.
housing rendering it accessible
for service requirements. Control
is by means of a PLC.

“K” SEALING.
In order to obtain a compact bag it’s possible to utilise
“K” sealing on the bag corners. In this way the top
and bottom profiles would be perfectly squared.
This operation is carried out before the forming
phase using extra sealing bars.

CORROSIVE ENVIRONMENTS.
For machines destined to be deployed in corrosive
2nd coat environments, a special paint treatment can be used
Undercoat and upon request, certain main parts can be
Primer
manufactured in stainless steel.
Metallic Base plate

PAGLIERANI: A LINE MADE UP OF STRONG POINTS.

You might also like