SMI STEEL PRODUCTS COMPOSITE CASTELLATED BEAM DESIGN PROGRAM

INTRODUCTIO N: CONSTRUCTION BRIDGING:

This program will a ssist in sizing simply supported , compos ite castellated beams with point and Construction bridging is required for castellated beams only when one or both ends are either
uniformly distributed loads. All areas shaded yellow or with a drop box req uire input seat ed or bearing. OSHA requires construction bridging to be installed to meet the following
information. Contact SMI Steel Products toll free a t (877) 764-2326 for further information or loading conditions:
assistance. 1. A 300 lb. man at midspan. This condition requires bo lted X-bridging to be installed before the
HOW TO SPECIFY: hoisting cables are remo ved.
Castellate d beams can be specifie d in one of the following meth ods: 2. O ne 4000 lb. bundle of deck to be placed o ver th ree beams no further than 1'-0" from th e e nd of
1. Direct Specif ica tion: the beam. This condition requires ho rizontal bridging to be in place before deck bundle s are
Wh en using direct specifiation the b eam is specified in the sa me manner as a wide flange placed.
be am. For exa mple, CB27x40, CB stands for Ca stellated Beam, nominally 27 inches deep WARNINGS & ERRORS:
weighing 40 pounds per foot. In composite construction, signif icant weight savings can be The following are errors and will cause to program to not report results:
achieved by using a heavier tee section on the bottom and a lighter section on the top. This is 1. "e < emin" - e must be at least 3" to provide conx. mat erial.
kn own as an assymetric section. An example of this specification is CB27x35/46. As before, 2. "d t< dtmin" - dt must be gre ate r than dtmin for fabrication reasons
CB stands for Castellated Beam, nominally 27 inches deep. The beam is manufactured from a 3. "e/tw>30", "2h/e>8", "Phi>62", "Phi<43" - no research has be en pe rformed on web post
35 pound per foot beam on top and a 46 pound per foot on bottom. Se veral common buckling outside these limitations.
assyme tric sections can be selected in the de sign program. In order to accomodate production 4. "h/tw>97 0/(Fy^.5)" - th e we b slenderness exceeds the design procedure .
proce sses, SMI Steel Products may f rom time to time provide an equivolent symetrical size. 5. "Point load s must start w/ P1 farthest left " - Poin t loads must be entered starting with P1
2 . Performanc e Spec if ication : farthest left and end ing with P4 fa rthest right.
A performance specification is the best way to insure the beam is de signed as eff iciently as The following are warnings but will not ca use errors in the program:
possible. An example of a performance specification is: CB27(1100/ 560/500). CB stands f or 1. "Top or Botto m Tee Slender" - a llowab le stress on tee section has been reduc ed per Qs.
Caste llated Beam, nominally 27 inches dee p, (Total Load/ Live Load,Precomposite Dead Load). 2. "ds>2.5*tf" - st ud diam. mu st be less than or equal to 2.5*flange thickness
SMI Steel Products will provide the most efficient shape (symetric or assymet ric) to support 3. "Studs too long" - shear studs must allow for at least 1/2" clear between the top of the stud and
specified loadings. the surface of the slab.
USE OF PROGRAM: 4. "Studs too short" - shear studs must be at least 1 1/2" taller than the ribs of the de ck.
1.Enter job name and de sign mark (not required). 5. "tc<2''" - concre te must be at least 2" above the flutes of the deck.
2. Enter the beam configurat ion: span (70'-0" max), spacing (left & right), material strengt h (36
or 50), and connection type. If beams longer than 70' are needed please call SMI Steel
Products for ava ilability.
3. Enter co ncrete properties (strength, weight, & thick.), de ck properties (height & rib width), a nd
stud properties (diam., no./rib, & length, an d percent composite).
4. Enter loading. Program allows (1) uniform live load, (1) uniform dead load, and up to (4)
point loads. In order to verify the adequacy of the pre-composite beam, the pe rcent presen t
be fore the concrete has hardened should be entered as well. Th e four point loads should be
entered st arting with P1 and ending with P4.
5. Press Stnd. Geom. button. This enters the standard castellation patt ern correspo nding to the
given castellated beam.
6. Choose a trial castellated beam. If all in tera ction values sh own on the s creen are less than
1. 0, the beam is o k.
OPTIMIZATION:
All of the failure modes and their corresponding interact ion values are shown in the results
section. All values must be less than or equal to 1. 0 for the beam to be OK. Press the "Find
Lightest Shape" button to ha ve the program select the lights sha pe wit h a standard caste llation
pattern. Significant stre ngt h improv ements can b e a chieved by modifying the castellation
pattern. The following guidelines will help in the optimization process.
1. To increase shear or web post strength, increase "e".
2. To increase bending strength, decrease "e".
3. If poin t loads are a significant portion of the load, increase "dt".
* You can return to standard geo metry by pre ssing the "Stnd. Geom." button*
SHEAR STUD DESIGN: NOMENCLATURE:
The program will design the shear studs ba sed on the co mposite design values se lected. You
can c hoose either fu ll or partial composite . The program will space studs for point loads only if
the lo ading is symetric. If the loading is not symetric, the program will not sup ply the stud
spacing .

d = depth of root b eam

bf = flange w id th
tf = flange thick nes s
tw = web thic kness
ho = height of hole
wo = width of hole
S = hole spacing

e = web po st width & tee leng th

b = wid th of sloped portion
d t = tee depth
d g = castella ted b eam depth
tc = thick. conc. abo ve flu te s
hr = hg t. of de ck, d s = stud d ia .
fc' = 2 8 day con crete strength
w c = unit weigh t of c oncrete
 BEAM INFORMATION LOADING INFORMATION EXPAND'D. SXN. PROP'S

36
Job Name Sample Project Uniform Distributed Loads Avg. wt. 53.0 plf

Web
Beam Mark # B1 Live Load 700 plf Pre-comp % 0% Anet 11.791 in^2
Span 50.000 ft Dead Load 660 plf Pre-comp % 100% Agross 19.168 in^2

CB30x44/62
Spac. Left 8.000 ft Concentrated Point Loads Ix net 2299.602 in^4
Spac. Right 8.000 ft Load # Magnitude Dist from Percent DL Percent Ix gross 2565.713 in^4
Mat. Strength-Fy 36 ksi (#) (kips) Lft. End (ft) (%) Pre-Comp. Sx net 126.251 in^3
Left End Conx. 2 1=seat, 2= P1 0.00 0.00 0% 0% Sx gross 148.924 in^3

3000
3/4"
Rht. End Conx. 2 1=seat, 2= P2 0.00 0.00 0% 0% rx min 11.569 in

145
Castellated Beam P3 0.00 0.00 0% 0% Iy 39.026 in^4
Root Beams (T/B) W21x44 W21x62 P4 0.00 0.00 0% 0% Sy 19.513 in^3

100%
d 20.66 20.99 COMPOSITE INFORMATION COMPOSITE SXN. PROP'S
bf 6.5 8.24 Concrete & Deck: Shear Studs: n 9.589
tf 0.45 0.615 conc. strength - fc' (psi) 3000 stud dia. (in) 0.75 beffec. 75.000 in
tw 0.35 0.4 conc. wt. - wc (pcf) 145 stud ht. (in) 4 Actr 23.464 in^2
Castellation Parameters: conc. above deck - tc (in) 3 studs per rib 1 N.A. ht. 26.887 In Steel
e 8.000 in rib height - hr (in) 2 composite % 1 Itr 6017.509 in^4
b 5.500 in rib width - wr (in) 6 Stud Spacing: Ieffec. 6017.50853 in^3
dt 5.500 in N=38,Uniformly Dist. Sxconc 686.727 in^3
S 27.000 in RESULTS WARNINGS Sxsteel 223.804 in^3
dg 30.650 in Failure Mode Interaction Status CONSTRUC. BRIDGING
phi 60.755 deg Bending 0.996 <=1.0 OK!! Req'd Rows Bolted X Not Req'd
ho 19.650 in Web Post 0.924 <=1.0 OK!! Req'd Rows Horiz. Not Req'd
wo 19.000 in Shear 0.877 <=1.0 OK!!
Concrete 0.062 <=1.0 OK!!
Pre-Comp. 0.981 <=1.0 OK!! MAXIMUM PASSABLE DUCTS
Overall 0.996 <=1.0 OK!! ROUND RECTANGULAR
Pre-Composite Deflec. 1.532'' =L/392 Diam. (in) Wid (in) Hght. (in)
Live Load Deflection 0.564'' =L/1064 16.011 9.000 16.185

S HE AR & M OM E NT M ODULE - P RE COM P OS I TE LOCAL BE NDI NG M ODULE - P RE COM P OS I TE W E B P OS T & S HE AR S TRE S S M ODULE - P RE COM P OS I TE DE FLE CTI ON M ODULE - P RE COM P OS I TE
Uniform Dist. Load Point Load #1 Point Load #2 Point Load #3 Point Load #4 Shear & Moment Totals Extreme Results Summary of Precomp. Results Consider 1st Web Post Stiffened? 1 1=yes,2=no Unit Load @ Mid Span Uniform Dist. Load Point Load #1 Point Load #2 Point Load #3 Point Load #4 DEAD L O AD DEF L ECT I O N
W TL (klf) 0.7130 P (kips) 0 P (kips) 0 P (kips) 0 P (kips) 0 Location Compression Tension Bending 0.981 <=1.0 OK!! P (kips) 1 W TL (klf) 0.713 P (kips) 0 P (kips) 0 P (kips) 0 P (kips) 0
W DL (klf) 0.7130 A (ft) 0 A (ft) 0 A (ft) 0 A (ft) 0 Strs. (ksi) INT. (#) Strs. (ksi) INT. (#) Shear 0.442 <=1.0 OK!! A (ft) 25 W DL (klf) 0.713 A (ft) 0 A (ft) 0 A (ft) 0 A (ft) 0 Ixt avg. 13.438 in^4 tw avg. 0.375 in
W LL (klf) 0.0000 B (ft) 50 B (ft) 50 B (ft) 50 B (ft) 50 1 19.952 0.930 -0.520 0.024 Web Post 0.466 <=1.0 OK!! B (ft) 25 W LL (klf) 0 B (ft) 50 B (ft) 50 B (ft) 50 B (ft) 50 h avg. 9.825 in A tee avg. 5.896 in^2
RL (kips) 0 RL (kips) 0 RL (kips) 0 RL (kips) 0 2 21.186 0.981 11.666 0.000 RL (kips) 0.5 RL (kips) 0 RL (kips) 0 RL (kips) 0 RL (kips) 0 A tweb 2.0625 in^2
RR (kips) 0 RR (kips) 0 RR (kips) 0 RR (kips) 0 3 -13.370 0.000 -16.456 0.762 Max Comp 19.952 21.186 -13.370 1.410 0.930 0.924 - 0.971 0.981 - 0.000 0.000 - 0.044 0.065 - RR (kips) -0.5 RR (kips) 0 RR (kips) 0 RR (kips) 0 RR (kips) 0 0
Mmax (kip-ft) 0 Mmax (kip-ft 0 Mmax (kip-ft 0 Mmax (kip-ft 0 4 1.410 0.065 -13.370 0.619 Max Tens. -0.520 11.666 -16.456 -13.370 - - 0.024 - - 0.000 - - 0.762 - - 0.619 Mmax (kip-ft 12.5 Mmax (kip-ft 0 Mmax (kip-ft 0 Mmax (kip-ft 0 Mmax (kip-ft 0 Total DL Deflection @ Mid Span 0.000
Per. DL (%) 1 Per. DL (%) 0% Per. DL (%) 0% Per. DL (%) 0% Per. DL (%) 0% + = Compression, - = Tension 1 2 3 4 INT. @ 1 INT. @ 2 INT. @ 3 INT. @ 4 Per. DL (%) Per. DL (%) 0 Per. DL (%) 0 Per. DL (%) 0 Per. DL (%) 0 Per. DL (%) 0 Summation of Panel Points 0.0000 0.0000 0.0000 0.0000 0.0000
X V M V M V M V M V M V - DL M - DL V - LL M - LL Opening X V - TL M - TL a b a b a b a b Sum @ 1 Sum @ 2 Sum @ 3 Sum @ 4 H 1-1 H 1-2 H2-1 H 1-1 H 1-2 H2-1 H 1-1 H 1-2 H2-1 H 1-1 H 1-2 H2-1 Web Post X V Sum V dM Opening X Vi Mi Ni Ti V M V M V M V M V M V-DL M-DL N T y1 y2 y3 y4 y5
(ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) Location (ft) (kip-ft) (kip-ft) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) Location (ft) (kips) (kips) (kip-ft) Location (ft) (kips) (kip-ft) (kips) (kips) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kips) (in) (in) (in) (in) (in)
0.000 17.825 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 17.825 0.000 0.000 0.000 Web Post 0.000 17.825 0.000 - - - - - - - - - - - - - - - - - - - - - - - - W.P. 1L 0 17.825 - - HO RI Z O NT AL SHEAR WEB POST BUCKL I NG Web Post 0.000 0.5000 0.0000 - - 17.8250 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 - - - - - -
1.458 16.785 25.237 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 16.785 25.237 0.000 0.000 Hole 1L 1.458 16.785 25.237 2.260 -2.780 2.260 9.406 -1.514 -12.100 -1.514 2.925 -0.520 11.666 -13.614 1.410 - - 0.024 0.476 0.540 - - - 0.630 0.044 0.065 - W.P. 2L 2.583 15.983 31.966 35.962 Method #1: (only for sym. Sxns.) Hole 1 1.458 0.5000 0.7292 0.3089 0.4766 16.7852 25.237 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
3.708 15.181 61.199 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 15.181 61.199 0.000 0.000 Hole 2L 3.708 15.181 61.199 5.480 -2.514 5.480 8.507 -3.672 -10.943 -3.672 2.645 2.966 13.987 -14.616 -1.027 0.156 0.137 - 0.590 0.648 - - - 0.677 - - 0.048 W.P. 3L 4.833 14.379 28.758 32.352 Top Tee Bot. Tee Top Section: Bottom Section: Hole 2 3.708 0.5000 1.8542 0.7855 0.4766 15.1810 61.199 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
5.958 13.577 93.551 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 13.577 93.551 0.000 0.000 Hole 3L 5.958 13.577 93.551 8.377 -2.249 8.377 7.608 -5.614 -9.787 -5.614 2.366 6.129 15.985 -15.401 -3.248 0.302 0.284 - 0.690 0.740 - - - 0.713 - - 0.150 W.P. 4L 7.083 12.775 25.549 28.743 af 2.925 5.068 in^2 e 8.000 in e 8.000 in Hole 3 5.958 0.5000 2.9792 1.2622 0.4766 13.5767 93.551 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
8.208 11.972 122.294 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 11.972 122.294 0.000 0.000 Hole 4L 8.208 11.972 122.294 10.951 -1.983 10.951 6.709 -7.338 -8.631 -7.338 2.086 8.968 17.660 -15.969 -5.252 0.432 0.415 - 0.775 0.818 - - - 0.739 - - 0.243 W.P. 5L 9.333 11.170 22.341 25.133 aw 5.149 5.950 in^2 b 5.500 in b 5.500 in Hole 4 8.208 0.5000 4.1042 1.7388 0.4766 11.9725 122.294 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
10.458 10.368 147.427 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 10.368 147.427 0.000 0.000 Hole 5L 10.458 10.368 147.427 13.202 -1.717 13.202 5.810 -8.847 -7.474 -8.847 1.807 11.484 19.012 -16.321 -7.040 0.548 0.532 - 0.844 0.880 - - - 0.756 - - 0.326 W.P. 6L 11.583 9.566 19.132 21.524 yf 14.935 15.183 in dt 5.500 in dt 5.500 in Hole 5 10.458 0.5000 5.2292 2.2154 0.4766 10.3682 147.427 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
12.708 8.764 168.951 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 8.764 168.951 0.000 0.000 Hole 6L 12.708 8.764 168.951 15.129 -1.452 15.129 4.911 -10.138 -6.318 -10.138 1.527 13.678 20.040 -16.456 -8.611 0.648 0.633 - 0.899 0.928 - - - 0.762 - - 0.399 W.P. 7L 13.833 7.962 15.924 17.914 yw 7.355 7.438 in s 27.000 in s 27.000 in Hole 6 12.708 0.5000 6.3542 2.6920 0.4766 8.7640 168.951 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
14.958 7.160 186.865 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 7.160 186.865 0.000 0.000 Hole 7L 14.958 7.160 186.865 16.733 -1.186 16.733 4.012 -11.213 -5.161 -11.213 1.248 15.547 20.745 -16.374 -9.966 0.733 0.720 - 0.938 0.960 - - - 0.758 - - 0.461 W.P. 8L 16.083 6.358 12.715 14.305 V 15.983 15.983 kips h 9.660 in h 9.990 in Hole 7 14.958 0.5000 7.4792 3.1686 0.4766 7.1597 186.865 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
17.208 5.555 201.169 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 5.555 201.169 0.000 0.000 Hole 8L 17.208 5.555 201.169 18.014 -0.920 18.014 3.113 -12.071 -4.005 -12.071 0.968 17.094 21.127 -16.076 -11.103 0.803 0.791 - 0.962 0.978 - - - 0.744 - - 0.514 W.P. 9L 18.333 4.753 9.507 10.695 Igross 2565.713 2565.713 in^4 y bar tee 4.245 in y bar tee 4.429 in Hole 8 17.208 0.5000 8.6042 3.6452 0.4766 5.5555 201.169 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
19.458 3.951 211.864 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 3.951 211.864 0.000 0.000 Hole 9L 19.458 3.951 211.864 18.972 -0.654 18.972 2.214 -12.713 -2.848 -12.713 0.688 18.317 21.186 -15.562 -12.025 0.858 0.848 - 0.971 0.981 - - - 0.720 - - 0.557 W.P. 10L 20.583 3.149 6.298 7.085 S 27.000 27.000 in Hole 9 19.458 0.5000 9.7292 4.1219 0.4766 3.9512 211.864 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
21.708 2.347 218.950 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 2.347 218.950 0.000 0.000 Hole 10L 21.708 2.347 218.950 19.606 -0.389 19.606 1.315 -13.138 -1.692 -13.138 0.409 19.218 20.922 -14.830 -12.729 0.898 0.890 - 0.966 0.969 - - - 0.687 - - 0.589 W.P. 11L 22.833 1.545 3.090 3.476 e 8.000 8.000 in Vmax 15.983 kips Vmax 15.983 kips Hole 10 21.708 0.5000 10.8542 4.5985 0.4766 2.3470 218.950 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
23.958 0.743 222.426 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.743 222.426 0.000 0.000 Hole 11L 23.958 0.743 222.426 19.918 -0.123 19.918 0.416 -13.347 -0.535 -13.347 0.129 19.795 20.334 -13.882 -13.218 0.923 0.916 - 0.945 0.941 - - - 0.643 - - 0.612 W.P. 12L 24.479 0.371 0.743 0.387 fv-horiz. 4.899 6.370 ksi Vh 15.517 kips Vh 14.964 kips Hole 11 23.958 0.5000 11.9792 5.0751 0.4766 0.7427 222.426 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Hole 12L 25.000 0.000 222.813 19.952 0.000 19.952 0.000 -13.370 0.000 -13.370 0.000 19.952 19.952 -13.370 -13.370 0.930 0.924 - 0.930 0.924 - - - 0.619 - - 0.619 Not Used! 25.000 - - - Fv 14.400 14.400 ksi Macutal 149.897 kip-in M 149.491 kip-in Hole 12 26.208 -0.5000 11.8958 5.0398 0.4766 -0.8615 222.292 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interac'n: 0.340 0.442 OK!! Mp 1137.150 kip-in Mp 1299.600 kip-in Hole 13 28.458 -0.5000 10.7708 4.5632 0.4766 -2.4658 218.549 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - 2h/e 2.415 2h/e 2.498 Hole 14 30.708 -0.5000 9.6458 4.0866 0.4766 -4.0700 211.196 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Method #2: e/tw 22.857 e/tw 20.000 Hole 15 32.958 -0.5000 8.5208 3.6099 0.4766 -5.6743 200.234 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Top Tee Bot. Tee Mocr/Mp 0.472 Mocr/Mp 0.472 Hole 16 35.208 -0.5000 7.3958 3.1333 0.4766 -7.2785 185.662 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Max dM 35.962 35.962 kip-ft Mocr 537.118 kip-in Mocr 613.849 kip-in Hole 17 37.458 -0.5000 6.2708 2.6567 0.4766 -8.8828 167.480 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Vh 15.236 15.236 kips Mallow 321.628 kip-in Mallow 367.574 kip-in Hole 18 39.708 -0.5000 5.1458 2.1801 0.4766 -10.4870 145.689 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - fv-horiz. 5.441 4.761 ksi F.S. 0.466 OK!! F.S. 0.407 OK!! Hole 19 41.958 -0.5000 4.0208 1.7035 0.4766 -12.0913 120.288 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Fv 14.400 14.400 ksi Hole 20 44.208 -0.5000 2.8958 1.2268 0.4766 -13.6955 91.278 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interac'n: 0.378 0.331 OK!! For Phi=58 to 62 deg Hole 21 46.458 -0.5000 1.7708 0.7502 0.4766 -15.2998 58.658 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Hole 22 48.708 -0.5000 0.6458 0.2736 0.4766 -16.9040 22.429 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Method #3: e/tw =10 y=0.58719*0.91662^x e/tw =10 y=0.58719*0.91662^x Not Used! 50.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Top Tee Bot. Tee e/tw = 20 y=1.96021*0.69931^x e/tw = 20 y=1.96021*0.69931^x Not Used! 53.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Max SumV 31.966 31.966 kip-ft e/tw = 30 y=2.55139*0.57367^x e/tw = 30 y=2.55139*0.57367^x Not Used! 55.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Vh 15.236 15.236 kips Not Used! 57.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - fv-horiz. 5.441 4.761 ksi actual e/tw: 22.857 actual e/tw: 20.000 Not Used! 59.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Fv 14.400 14.400 ksi actual 2h/e: 2.415 actual 2h/e: 2.498 Not Used! 62.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interac'n: 0.378 0.331 OK!! Not Used! 64.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 10 0.472 e/tw = 10 0.472 Not Used! 66.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - VERT I CAL SHEAR e/tw = 20 0.472 e/tw = 20 0.472 Not Used! 68.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Net Sxn. Gross Sxn. e/tw = 30 0.472 e/tw = 30 0.472 Not Used! 71.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Vmax 17.825 17.825 kips Not Used! 73.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - av 4.125 11.502 in^2 e/tw <10 0.472 e/tw <10 0.472 Not Used! 75.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - fv-vert. 4.321 1.550 ksi 10<e/tw<20 0.472 10<e/tw<20 0.472 Not Used! 77.958 - - - - - - - - - - - - - - - - - - - - - - -
CENT ER L I NE BEAM CENT ER L I NE BEAM CENT ER L I NE BEAM Fv 14.400 14.400 ksi 20<e/tw<30 0.472 20<e/tw<30 0.472 Not Used! 80.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Interac'n: 0.300 0.108 OK!! Mp/Mocr 0.472 Mp/Mocr 0.472 Not Used! 82.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - For 2h/e = 22.857, Mp/Mocr = 0.472 For 2h/e = 20, Mp/Mocr = 0.472 Not Used! 84.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 86.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - For Phi=43 to 47 deg Not Used! 89.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 91.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw =10 y=0.351429-0.05119x+0.002619x^2 Not Used! 93.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 20 y=3.275857-1.208333x+0.154286x^2-0.006667x^3 Not Used! 95.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 30 y=3.275857-1.208333x+0.154286x^2-0.006667x^3 Not Used! 98.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 100.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - actual e/tw: 22.857 actual e/tw: 20.000 Not Used! 102.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - actual 2h/e: 2.415 actual 2h/e: 2.498 Not Used! 104.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 107.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 10 0.243 e/tw = 10 0.240 Not Used! 109.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 20 0.243 e/tw = 20 0.240 Not Used! 111.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 30 0.243 e/tw = 30 0.240 Not Used! 113.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 116.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw <10 0.243 e/tw <10 0.240 Not Used! 118.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - 10<e/tw<20 0.243 10<e/tw<20 0.240 Not Used! 120.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - 20<e/tw<30 0.243 20<e/tw<30 0.240 Not Used! 122.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Mp/Mocr 0.243 Mp/Mocr 0.240 Not Used! 125.208 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - For e/tw = 22.857, Mp/Mocr = 0.243 For e/tw = 20, Mp/Mocr = 0.24 Not Used! 127.458 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 129.708 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interpolate For Bending F.S. Interpolate For Mp/Mocr F.S. Not Used! 131.958 - - - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 222.813 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 0.000 Hole 12R 25.000 0.000 222.813 19.952 0.000 19.952 0.000 -13.370 0.000 -13.370 0.000 19.952 19.952 -13.370 -13.370 0.930 0.924 - 0.930 0.924 - - - 0.619 - - 0.619 Not Used! 25.000 - - - Phi (deg) Bending F.S. For phi=43-62 degrees-interpolated Not Used! 134.208 - - - - - - - - - - - - - - - - - - - - - - -
26.042 -0.743 222.426 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -0.743 222.426 0.000 0.000 Hole 11R 26.042 0.743 222.426 19.918 -0.123 19.918 0.416 -13.347 -0.535 -13.347 0.129 19.795 20.334 -13.882 -13.218 0.923 0.916 - 0.945 0.941 - - - 0.643 - - 0.612 W.P. 12R 25.521 0.371 0.743 0.387 47 1.67 Not Used! 136.458 - - - - - - - - - - - - - - - - - - - - - - -
28.292 -2.347 218.950 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -2.347 218.950 0.000 0.000 Hole 10R 28.292 2.347 218.950 19.606 -0.389 19.606 1.315 -13.138 -1.692 -13.138 0.409 19.218 20.922 -14.830 -12.729 0.898 0.890 - 0.966 0.969 - - - 0.687 - - 0.589 W.P. 11R 27.167 1.545 3.090 3.476 52.5 2.5 Not Used! 138.708 - - - - - - - - - - - - - - - - - - - - - - -
30.542 -3.951 211.864 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -3.951 211.864 0.000 0.000 Hole 9R 30.542 3.951 211.864 18.972 -0.654 18.972 2.214 -12.713 -2.848 -12.713 0.688 18.317 21.186 -15.562 -12.025 0.858 0.848 - 0.971 0.981 - - - 0.720 - - 0.557 W.P. 10R 29.417 3.149 6.298 7.085 58 1.67 Top Tee Section Bottom Tee Section Not Used! 140.958 - - - - - - - - - - - - - - - - - - - - - - -
32.792 -5.555 201.169 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -5.555 201.169 0.000 0.000 Hole 8R 32.792 5.555 201.169 18.014 -0.920 18.014 3.113 -12.071 -4.005 -12.071 0.968 17.094 21.127 -16.076 -11.103 0.803 0.791 - 0.962 0.978 - - - 0.744 - - 0.514 W.P. 9R 31.667 4.753 9.507 10.695 phi Mp/Mocr phi Mp/Mocr Not Used! 143.208 - - - - - - - - - - - - - - - - - - - - - - -
35.042 -7.160 186.865 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -7.160 186.865 0.000 0.000 Hole 7R 35.042 7.160 186.865 16.733 -1.186 16.733 4.012 -11.213 -5.161 -11.213 1.248 15.547 20.745 -16.374 -9.966 0.733 0.720 - 0.938 0.960 - - - 0.758 - - 0.461 W.P. 8R 33.917 6.358 12.715 14.305 Phi-Top 60.345 47 0.2431 47 0.2399 Not Used! 145.458 - - - - - - - - - - - - - - - - - - - - - - -
37.292 -8.764 168.951 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -8.764 168.951 0.000 0.000 Hole 6R 37.292 8.764 168.951 15.129 -1.452 15.129 4.911 -10.138 -6.318 -10.138 1.527 13.678 20.040 -16.456 -8.611 0.648 0.633 - 0.899 0.928 - - - 0.762 - - 0.399 W.P. 7R 36.167 7.962 15.924 17.914 F.S.-Top 1.316 1.670 58 0.4723 58 0.4723 Not Used! 147.708 - - - - - - - - - - - - - - - - - - - - - - -
39.542 -10.368 147.427 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -10.368 147.427 0.000 0.000 Hole 5R 39.542 10.368 147.427 13.202 -1.717 13.202 5.810 -8.847 -7.474 -8.847 1.807 11.484 19.012 -16.321 -7.040 0.548 0.532 - 0.844 0.880 - - - 0.756 - - 0.326 W.P. 6R 38.417 9.566 19.132 21.524 Phi-Bot. 61.165 60.345 0.5212 61.165 0.5392 Not Used! 149.958 - - - - - - - - - - - - - - - - - - - - - - -
41.792 -11.972 122.294 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -11.972 122.294 0.000 0.000 Hole 4R 41.792 11.972 122.294 10.951 -1.983 10.951 6.709 -7.338 -8.631 -7.338 2.086 8.968 17.660 -15.969 -5.252 0.432 0.415 - 0.775 0.818 - - - 0.739 - - 0.243 W.P. 5R 40.667 11.170 22.341 25.133 F.S. Bot. 1.192 1.670 Actual Mp/M 0.4723 Actual Mp/M 0.4723 Not Used! 152.208 - - - - - - - - - - - - - - - - - - - - - - -
44.042 -13.577 93.551 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -13.577 93.551 0.000 0.000 Hole 3R 44.042 13.577 93.551 8.377 -2.249 8.377 7.608 -5.614 -9.787 -5.614 2.366 6.129 15.985 -15.401 -3.248 0.302 0.284 - 0.690 0.740 - - - 0.713 - - 0.150 W.P. 4R 42.917 12.775 25.549 28.743 Not Used! 154.458 - - - - - - - - - - - - - - - - - - - - - - -
46.292 -15.181 61.199 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -15.181 61.199 0.000 0.000 Hole 2R 46.292 15.181 61.199 5.480 -2.514 5.480 8.507 -3.672 -10.943 -3.672 2.645 2.966 13.987 -14.616 -1.027 0.156 0.137 - 0.590 0.648 - - - 0.677 - - 0.048 W.P. 3R 45.167 14.379 28.758 32.352 Not Used! 156.708 - - - - - - - - - - - - - - - - - - - - - - -
48.542 -16.785 25.237 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -16.785 25.237 0.000 0.000 Hole 1R 48.542 16.785 25.237 2.260 -2.780 2.260 9.406 -1.514 -12.100 -1.514 2.925 -0.520 11.666 -13.614 1.410 - - 0.024 0.476 0.540 - - - 0.630 0.044 0.065 - W.P. 2R 47.417 15.983 31.966 35.962 Not Used! 158.958 - - - - - - - - - - - - - - - - - - - - - - -
50.000 -17.825 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -17.825 0.000 0.000 0.000 Web Post 50.000 17.825 0.000 - - - - - - - - - - - - - - - - - - - - - - - - W.P. 1R 50.000 17.825 - - Not Used! 161.208 - - - - - - - - - - - - - - - - - - - - - - -

Organized By Beam Number - For Choosing Section

S E CTI ON P ROP E RTI E S M ODULE D E S I G N A P P L I C. & A L L O W A B L E S T R E S S M O D U L E CONSTRUCTION BRIDGING MODULE DUCT PASSAGE MODULE Beam Castellated Top Bottom Beam Beam Castellated Top Bottom Beam dg nom.
Castellation Parameters Resultant Castellated Shape Check Section Compactness Criteria One Man Load ROUND (DIA) RECT. RECT(Amax) Number Shape Section Section Wt. (plf) Number Shape Section Section Wt. (plf) (in)
Top Bottom CB Beam CB31x53 Net Sxn. Grs. Sxn. Top Flange Compactness: (bf/tf)/2 = 7.222 <= 65/(Fy^.5)= 10.833 OK Man wt. 0.300 kips Rows of Lb M1 M2 Cb l/rT Criteria F1-6 F1-7 Fb Interaction This col. 1 CB15x12 W10x12 W10x12 12 W10x12 T&B 1 CB15x12 W10x12 W10x12 12 15
WF Beam W21x44 W21x62 h top 9.660 in As 11.791 19.168 in^2 Bot. Flange Compatctness: (bf/tf)/2 = 6.699 <= 65/(Fy^.5)= 10.833 OK A (ft) 25.000 ft Bracing (ft) (kip-ft) (kip-ft) (#) (#) (#) (ksi) (ksi) (ksi) (#) show fist ok 16.5113254 9.5 16.6854545 158.511818 2 CB15x15 W10x15 W10x15 15 W10x15 T&B 8 CB15x12/15 W10x12 W10x15 13.5 15
d (in) 20.660 20.990 in h bot 9.990 in Ix 2,299.602 2,565.713 in^4 Top Tee Slenderness Ratio: dt/tw= 15.714 <= 127/(Fy^.5) 21.167 OK B (ft) 25.000 ft 0 50.000 0.000 0.000 1 412.470 119.024 -120.111 0.999 0.999 1.932 0 3 CB15x17 W10x17 W10x17 17 W10x17 T&B 15 CB18x14 W12x14 W12x14 14 18
bf (in) 6.500 8.240 in ho 19.650 in Iy 39.026 39.114 in^4 Bot. Tee Slenderness Ratio: dt/tw= 13.750 <= 127/(Fy^.5) 21.167 OK M man 3.750 kip-ft 1 25.000 0.000 20.313 1.750 206.235 157.454 3.413 6.995 6.995 0.276 2 1 4 CB15x19 W10x19 W10x19 19 W10x19 T&B 9 CB15x12/17 W10x12 W10x17 14.5 15
tf (in) 0.450 0.615 in dg 30.650 in Sx top 126.251 148.924 in^3 Overall Section Compact.: h/tw= 87.571 <= 970/(Fy^.5) 161.666667 OK Self wt. 0.053 klf 2 16.667 17.222 17.222 1.000 137.490 119.024 7.988 8.993 8.993 0.215 3 2 5 CB15x22 W10x22 W10x22 22 W10x22 T&B 21 CB18x14/16 W12x14 W12x16 15 18
tw (in) 0.350 0.400 in S 27.000 in Sx tob 184.922 191.162 in^3 M slf. wt. 16.563 kip-ft 3 12.500 14.297 20.313 2.300 103.117 180.509 20.084 36.772 20.084 0.096 4 3 6 CB15x26 W10x26 W10x26 26 W10x26 T&B 2 CB15x15 W10x15 W10x15 15 15
e (in) 8.000 8.000 in Phi top 60.345 deg deffec. 28.325 21.136 in Check Web Post Buckling Curves Applicability M total 20.313 kip-ft 4 10.000 18.900 18.900 1.000 82.494 119.024 18.236 24.981 18.236 0.106 5 4 7 CB15x30 W10x30 W10x30 30 W10x30 T&B 10 CB15x12/19 W10x12 W10x19 15.5 15
b (in) 5.500 5.500 in Phi bot 61.165 deg ybar 12.436 13.422 in W.P. wid. vs. web thick. (top): e/tw= 22.857 < 30 OK fb 1.931 ksi 2 1 Rows Bolted X Bridging 8 CB15x12/15 W10x12 W10x15 13.5 W10x12(T), W10x15(B) 16 CB18x16 W12x16 W12x16 16 18
dt (in) 5.500 5.500 in Wo 19.000 in rT 1.455 2.090 in W.P. wid. vs. web thick. (bot): e/tw= 20.000 < 30 OK 9 CB15x12/17 W10x12 W10x17 14.5 W10x12(T), W10x17(B) 11 CB15x15/17 W10x15 W10x17 16 15
Beam Wt. 53 plf NA shift 2.889 1.903 in down W.P. height. vs witdth.: ho/e= 2.456 <= 8 OK 10 CB15x12/19 W10x12 W10x19 15.5 W10x12(T), W10x19(B) 22 CB18x14/19 W12x14 W12x19 16.5 18
Net Section Properties: Bundle of Deck 11 CB15x15/17 W10x15 W10x17 16 W10x15(T), W10x17(B) 3 CB15x17 W10x17 W10x17 17 15
Top Tee Section Properties: Bottom Tee Section Properties: Check Cutting Pattern Deck Wt. 0.444 klf Rows of Lb M1 M2 Cb l/rT Criteria F1-6 F1-7 Fb Interaction This col. 12 CB15x15/19 W10x15 W10x19 17 W10x15(T), W10x19(B) 12 CB15x15/17 W10x15 W10x17 17 15
bf (in) 6.500 tf (in) 0.450 bf (in) 8.240 tf (in) 0.615 Minimum Web Post Width: e= 8.000'' >= 3.000'' OK A 1.000 ft Bracing (ft) (kip-ft) (kip-ft) (#) (#) (#) (ksi) (ksi) (ksi) (#) show fist ok 13 CB15x17/19 W10x17 W10x19 18 W10x17(T), W10x19(B) 24 CB18x16/19 W12x16 W12x19 17.5 18
tw (in) 0.350 dt (in) 5.500 tw (in) 0.400 dt (in) 5.500 Mimimum Tee Depth (top): dt top= 5.500'' >= tf+1= 1.450'' OK B 3.000 ft 0 50.000 0.000 0.000 1.000 412.470 119.024 -120.111 0.999 0.999 1.737 0 14 CB15x19/22 W10x19 W10x22 20.5 W10x19(T), W10x22(B) 23 CB18x14/22 W12x14 W12x22 18 18
fill. rad (in) 0.300 gt (in) 5.050 fill. rad (in) 0.300 gt (in) 4.885 Mimimum Tee Depth (bot.): dt bot= 5.500'' >= tf+1= 1.615'' OK C 46.000 ft 1 25.000 0.000 18.228 1.000 206.235 119.024 -12.028 3.997 3.997 0.434 2 1 15 CB18x14 W12x14 W12x14 14 W12x14 T&B 13 CB15x17/19 W10x17 W10x19 18 15
pi 3.142 Vfac. (%) 0.401 pi 3.142 Vfac. (%) 0.599 RL 1.265 kips 2 12.500 16.942 15.832 1.000 137.490 119.024 7.988 8.993 8.993 0.193 3 2 16 CB18x16 W12x16 W12x16 16 W12x16 T&B 17 CB18x19 W12x19 W12x19 19 18
Calculate Local Allowable Stresses: RR 0.067 kips 3 10.000 14.919 18.228 1.000 103.117 119.024 14.993 15.988 14.993 0.116 4 3 17 CB18x19 W12x19 W12x19 19 W12x19 T&B 25 CB18x16/22 W12x16 W12x22 19 18
Strong Axis (X) Properties: Strong Axis (X) Properties: Local-Top Tee-Column Buck. Local-Bottom Tee-Column Buck. Self wt. 0.053 klf 4 10.000 17.898 17.232 2.300 82.494 180.509 21.494 57.456 21.494 0.081 5 4 18 CB18x26 W12x26 W12x26 26 W12x26 T&B 4 CB15x19 W10x19 W10x19 19 15
Area' ybar' Ixx' Ad^2' Area' ybar' Ixx' Ad^2' K 0.65 K 0.65 Step 0.833 ft 2 1 Rows Horizontal Bridging 19 CB18x30 W12x30 W12x30 30 W12x30 T&B 27 CB18x19/22 W12x19 W12x22 20.5 18
(in^2) (in) (in^4) (in^4) (in^2) (in) (in^4) (in^4) L 8.000 in L 8.000 in Mmax 18.265 kip-ft 20 CB18x35 W12x35 W12x35 35 W12x35 T&B 14 CB15x19/22 W10x19 W10x22 20.5 15
Flange 2.925 5.275 0.049 3.102 Flange 5.068 5.193 0.160 2.951 r min 1.477 in r min 1.444 in fb 1.736 ksi 20.313 18.265 21 CB18x14/16 W12x14 W12x16 15 W12x14(T), W12x16(B) 26 CB18x16/26 W12x16 W12x26 21 18
Stem 1.768 2.525 3.756 5.230 Stem 1.954 2.443 3.886 7.714 KL/r 3.521 KL/r 3.602 X M-deck wt M-self wt. M man MmanT MdeckT X 22 CB18x14/19 W12x14 W12x19 16.5 W12x14(T), W12x19(B) 29 CB21x22 W14x22 W14x22 22 21
Fillets 0.039 4.983 0.000 0.021 Fillets 0.039 4.818 0.000 0.006 Cc 126.099 Cc 126.099 (ft) (kip-ft) (kip-ft) (kip-ft) (kip-ft) (kip-ft) (ft) Mint(man) Mint(deck) 23 CB18x14/22 W12x14 W12x22 18 W12x14(T), W12x22(B) 5 CB15x22 W10x22 W10x22 22 15
Cmx 0.850 Cmx 0.850 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0 20.313 18.265 24 CB18x16/19 W12x16 W12x19 17.5 W12x16(T), W12x19(B) 28 CB18x19/26 W12x19 W12x26 22.5 18
Atee (in^2) 4.731 Sx-top (in^ 9.690 Atee (in^2) 7.060 Sx-top (in^3 13.745 Eq E2-1 21.457 ksi Eq E2-1 21.453 ksi 0.833 1.055 1.086 0.125 1.211 2.140 0.833 1 20.313 18.265 25 CB18x16/22 W12x16 W12x22 19 W12x16(T), W12x22(B) 35 CB21x22/26 W14x22 W14x26 24 21
ybar (in) 4.245 Sx-bot (in^ 2.864 ybar (in) 4.429 Sx-bot (in^3 3.322 Eq E2-2 12048.538 ksi Eq E2-2 11511.320 ksi 1.667 2.010 2.135 0.250 2.385 4.145 1.667 2 20.313 18.265 26 CB18x16/26 W12x16 W12x26 21 W12x16(T), W12x26(B) 43 CB24x26 W16x26 W16x26 26 24
Ixx (in^4) 12.159 rx (in) 1.603 Ixx (in^4) 14.716 rx (in) 1.444 Fa 21.457 ksi Fa 21.453 ksi 2.500 2.664 3.147 0.375 3.522 5.811 2.500 3 20.313 18.265 27 CB18x19/22 W12x19 W12x22 20.5 W12x19(T), W12x22(B) 30 CB21x26 W14x26 W14x26 26 21
xbar (in) 0.364 Zx (in^3) 5.090 xbar (in) 0.428 Zx (in^3) 6.063 3.333 3.009 4.122 0.500 4.622 7.132 3.333 4 18.265 28 CB18x19/26 W12x19 W12x26 22.5 W12x19(T), W12x26(B) 36 CB21x22/30 W14x22 W14x30 26 21
Weak Axis (Y) Properties: Weak Axis (Y) Properties: Local-Top Tee-Bending Local-Bottom Tee-Bending 4.167 3.053 5.061 0.625 5.686 8.113 4.167 29 CB21x22 W14x22 W14x22 22 W14x22 T&B 18 CB18x26 W12x26 W12x26 26 18
Area' ybar' Ixx' Ad^2' Area' ybar' Ixx' Ad^2' dt/tw 15.714 # dt/tw 13.750 # 5.000 2.997 5.963 0.750 6.713 8.960 5.000 30 CB21x26 W14x26 W14x26 26 W14x26 T&B 6 CB15x26 W10x26 W10x26 26 15
(in^2) (in) (in^4) (in^4) (in^2) (in) (in^4) (in^4) 127/(Fy^.5) 21.167 # 127/(Fy^.5) 21.167 # 5.833 2.942 6.827 0.875 7.702 9.769 5.833 31 CB21x30 W14x30 W14x30 30 W14x30 T&B 37 CB21x22/34 W14x22 W14x34 28 21
Flange 2.925 0.000 10.298 0.000 Flange 5.068 0.000 28.673 0.000 176/(Fy^.5) 29.333 # 176/(Fy^.5) 29.333 # 6.667 2.886 7.656 1.000 8.656 10.542 6.667 32 CB21x34 W14x34 W14x34 34 W14x34 T&B 39 CB21x26/30 W14x26 W14x30 28 21
Stem 1.768 0.000 0.018 0.000 Stem 1.954 0.000 0.026 0.000 A-B5-5 1.234 % A-B5-5 1.318 % 7.500 2.831 8.447 1.125 9.572 11.277 7.500 One Rows of Bridg. Two Rows of Bridg. 33 CB21x38 W14x38 W14x38 38 W14x38 T&B 49 CB24x26/31 W16x26 W16x31 28.5 24
Fillets 0.039 0.000 0.000 0.005 Fillets 0.039 0.000 0.000 0.005 A-B5-6 2.250 % A-B5-6 2.938 % 8.333 2.775 9.201 1.250 10.451 11.976 8.333 Mmax 18.265 kip-ft Mmax 18.265 kip-ft 34 CB21x43 W14x43 W14x43 43 W14x43 T&B 31 CB21x30 W14x30 W14x30 30 21
Qs 1.000 % Qs 1.000 % 9.167 2.720 9.919 1.375 11.294 12.639 9.167 Mmax-loc'n 23.333 ft Mmax-loc'n 23.333 ft 35 CB21x22/26 W14x22 W14x26 24 W14x22(T), W14x26(B) 38 CB21x22/38 W14x22 W14x38 30 21
Atee (in^2) 4.731 Sy (in^3) 3.176 Atee (in^2) 7.060 Sy (in^3) 6.967 Fbx 21.600 ksi Fbx 21.600 ksi 10.000 2.664 10.600 1.500 12.100 13.264 10.000 Pt. X (ft) M (kip-ft) Status Pt. X (ft) M (kip-ft) Status 36 CB21x22/30 W14x22 W14x30 26 W14x22(T), W14x30(B) 40 CB21x26/34 W14x26 W14x34 30 21
ybar (in) 0.000 ybar (in) 0.000 10.833 2.609 11.244 1.625 12.869 13.853 10.833 0.000 0.000 0.000 0 0.000 0.000 0.000 not here 37 CB21x22/34 W14x22 W14x34 28 W14x22(T), W14x34(B) 19 CB18x30 W12x30 W12x30 30 18
Iyy (in^4) 10.322 ry (in) 1.477 Iyy (in^4) 28.705 ry (in) 2.016 11.667 2.553 11.851 1.750 13.601 14.404 11.667 0.500 25.000 18.228 not here 0.333 16.667 16.942 0.33333333 38 CB21x22/38 W14x22 W14x38 30 W14x22(T), W14x38(B) 7 CB15x30 W10x30 W10x30 30 15
Calculate Global Allowable Stresses: 12.500 2.498 12.422 1.875 14.297 14.919 12.500 1.000 50.000 0.000 not here 0.667 33.333 15.832 not here 39 CB21x26/30 W14x26 W14x30 28 W14x26(T), W14x30(B) 44 CB24x31 W16x31 W16x31 31 24
Gross Section Properties: L.T.B. - Top Flng. Comp. L.T.B. - Top Flng. Comp. 13.333 2.442 12.956 2.000 14.956 15.398 13.333 1.000 50.000 0.000 40 CB21x26/34 W14x26 W14x34 30 W14x26(T), W14x34(B) 50 CB24x26/36 W16x26 W16x36 31 24
Top Tee Section Properties: Bottom Tee Section Properties: Lc 4.418 ft Lc 7.655 ft 14.167 2.387 13.452 2.125 15.577 15.839 14.167 location 0 location 0.33333333 41 CB21x26/38 W14x26 W14x38 32 W14x26(T), W14x38(B) 41 CB21x26/38 W14x26 W14x38 32 21
bf (in) 6.500 tf (in) 0.450 bf (in) 8.240 tf (in) 0.615 Lu 6.861 ft Lu 8.698 ft 15.000 2.331 13.913 2.250 16.163 16.244 15.000 42 CB21x26/43 W14x26 W14x43 34.5 W14x26(T), W14x43(B) 51 CB24x26/40 W16x26 W16x40 33 24
tw (in) 0.350 dt (in) 15.160 tw (in) 0.400 dt (in) 15.490 UBL 1.000 ft UBL 1.000 ft 15.833 2.276 14.336 2.375 16.711 16.611 15.833 43 CB24x26 W16x26 W16x26 26 W16x26 T&B 52 CB24x31/36 W16x31 W16x36 33.5 24
fill. rad (in) 0.300 gt (in) 14.710 fill. rad (in) 0.300 gt (in) 14.875 Cb 1.000 # Cb 1.000 # 16.667 2.220 14.722 2.500 17.222 16.942 16.667 44 CB24x31 W16x31 W16x31 31 W16x31 T&B 32 CB21x34 W14x34 W14x34 34 21
pi 3.142 pi 3.142 Criteria 119.024 # Criteria 119.024 # 17.500 2.165 15.072 2.625 17.697 17.236 17.500 Three Rows of Bridg. 45 CB24x36 W16x36 W16x36 36 W16x36 T&B 42 CB21x26/43 W14x26 W14x43 34.5 21
L/rT 8.249 # L/rT 5.741 # 18.333 2.109 15.385 2.750 18.135 17.494 18.333 Mmax 18.265 kip-ft 46 CB24x40 W16x40 W16x40 40 W16x40 T&B 57 CB27x35 W18x35 W18x35 35 27
Strong Axis (X) Properties: Strong Axis (X) Properties: Shp. Fac. 1.061 Shp. Fac. 1.081 19.167 2.054 15.661 2.875 18.536 17.714 19.167 Mmax-loc'n 23.333 ft 47 CB24x45 W16x45 W16x45 45 W16x45 T&B 20 CB18x35 W12x35 W12x35 35 18
Area' ybar' Ixx' Ad^2' Area' ybar' Ixx' Ad^2' F1-6 21.600 ksi F1-6 21.600 ksi 20.000 1.998 15.900 3.000 18.900 17.898 20.000 Pt. X (ft) M (kip-ft) Status 48 CB24x50 W16x50 W16x50 50 W16x50 T&B 53 CB24x31/40 W16x31 W16x40 35.5 24
(in^2) (in) (in^4) (in^4) (in^2) (in) (in^4) (in^4) F1-7 21.600 ksi F1-7 21.600 ksi 20.833 1.943 16.102 3.125 19.227 18.045 20.833 0.000 0.000 0.000 not here 49 CB24x26/31 W16x26 W16x31 28.5 W16x26(T), W16x31(B) 45 CB24x36 W16x36 W16x36 36 24
Flange 2.925 14.935 0.049 67.734 Flange 5.068 15.183 0.160 88.092 Fbx 22.927 ksi Fbx 23.359 ksi 21.667 1.887 16.268 3.250 19.518 18.155 21.667 0.250 12.500 14.919 0.25 50 CB24x26/36 W16x26 W16x36 31 W16x26(T), W16x36(B) 62 CB27x35/40 W18x35 W18x40 37.5 27
Stem 5.149 7.355 92.838 39.442 Stem 5.950 7.438 109.711 76.073 22.500 1.832 16.397 3.375 19.772 18.228 22.500 0.500 25.000 18.228 not here 51 CB24x26/40 W16x26 W16x40 33 W16x26(T), W16x40(B) 54 CB24x31/45 W16x31 W16x45 38 24
Fillets 0.039 14.643 0.000 0.789 Fillets 0.039 14.808 0.000 0.556 23.333 1.776 16.489 3.500 19.989 18.265 23.333 0.750 37.500 13.254 not here 52 CB24x31/36 W16x31 W16x36 33.5 W16x31(T), W16x36(B) 33 CB21x38 W14x38 W14x38 38 21
24.167 1.721 16.544 3.625 20.169 18.265 24.167 1 50.000 0.000 53 CB24x31/40 W16x31 W16x40 35.5 W16x31(T), W16x40(B) 58 CB27x40 W18x40 W18x40 40 27
Atee (in^2) 8.112 Sx-top (in^ 39.874 Atee (in^2) 11.056 Sx-top (in^3 61.336 GLOBAL BE NDI NG 25.000 1.665 16.563 3.750 20.313 18.228 25.000 location 0.25 54 CB24x31/45 W16x31 W16x45 38 W16x31(T), W16x45(B) 46 CB24x40 W16x40 W16x40 40 24
ybar (in) 10.123 Sx-bot (in^ 19.842 ybar (in) 11.013 Sx-bot (in^3 24.933 25.833 1.610 16.544 3.625 20.169 18.154 25.833 55 CB24x36/50 W16x36 W16x50 43 W16x36(T), W16x50(B) 63 CB27x35/46 W18x35 W18x46 40.5 27
Ixx (in^4) 200.853 Ixx (in^4) 274.592 Top Flange - Pos. Moment Bottom Flange - Neg. Moment 26.667 1.554 16.489 3.500 19.989 18.043 26.667 56 CB24x40/57 W16x40 W16x57 48.5 W16x40(T), W16x57(B) 64 CB27x35/50 W18x35 W18x50 42.5 27
xbar (in) 3.571 Zx (in^3) 35.113 xbar (in) 1.670 Zx (in^3) 45.364 Mmax 441.563 kip-ft Mmax 0.000 kip-ft 27.500 1.499 16.397 3.375 19.772 17.895 27.500 Four Rows of Bridg. 57 CB27x35 W18x35 W18x35 35 W18x35 T&B 55 CB24x36/50 W16x36 W16x50 43 24
Weak Axis (Y) Properties: Weak Axis (Y) Properties: fbx 41.970 ksi fbx 28.654 ksi 28.333 1.443 16.268 3.250 19.518 17.711 28.333 Mmax 18.265 kip-ft 58 CB27x40 W18x40 W18x40 40 W18x40 T&B 34 CB21x43 W14x43 W14x43 43 21
Area' ybar' Ixx' Ad^2' Area' ybar' Ixx' Ad^2' Fbx 22.927 ksi Fbx 23.359 ksi 29.167 1.388 16.102 3.125 19.227 17.490 29.167 Mmax-loc'n 23.333 ft 59 CB27x46 W18x46 W18x46 46 W18x46 T&B 71 CB30x44 W21x44 W21x44 44 30
(in^2) (in) (in^4) (in^4) (in^2) (in) (in^4) (in^4) Interac'n 1.831 NG!! Interac'n 1.227 NG!! 30.000 1.332 15.900 3.000 18.900 17.232 30.000 Pt. X (ft) M (kip-ft) Status 60 CB27x50 W18x50 W18x50 50 W18x50 T&B 65 CB27x35/55 W18x35 W18x55 45 27
Flange 2.925 0.000 10.298 0.000 Flange 5.068 0.000 28.673 0.000 30.833 1.277 15.661 2.875 18.536 16.937 30.833 0.000 0.000 0.000 not here 0.200 61 CB27x55 W18x55 W18x55 55 W18x55 T&B 66 CB27x40/50 W18x40 W18x50 45 27
Stem 5.149 0.000 0.053 0.000 Stem 5.950 0.000 0.079 0.000 DE S I GN CHE CKS S T A D A R D G E O M. C H E C K 31.667 1.221 15.385 2.750 18.135 16.606 31.667 0.200 10.000 13.264 not here 0.400 62 CB27x35/40 W18x35 W18x40 37.5 W18x35(T), W18x40(B) 47 CB24x45 W16x45 W16x45 45 24
Fillets 0.039 0.000 0.000 0.005 Fillets 0.039 0.000 0.000 0.005 check limit status 1=ng, 0=ok standard actual status 0=stnd, 1=non. 32.500 1.166 15.072 2.625 17.697 16.237 32.500 0.400 20.000 17.898 0.4 0.600 63 CB27x35/46 W18x35 W18x46 40.5 W18x35(T), W18x46(B) 59 CB27x46 W18x46 W18x46 46 27
emin 3 0 e (in) 8.000 8.000 0 33.333 1.110 14.722 2.500 17.222 15.832 33.333 0.600 30.000 17.232 not here 0.800 64 CB27x35/50 W18x35 W18x50 42.5 W18x35(T), W18x50(B) 76 CB30x44/50 W21x44 W21x50 47 30
Atee (in^2) 8.112 Sy (in^3) 3.187 Atee (in^2) 11.056 Sy (in^3) 6.980 dtmin 1.615'' 0 b (in) 5.500 5.500 0 34.167 1.055 14.336 2.375 16.711 15.390 34.167 0.800 40.000 11.266 not here 1.000 65 CB27x35/55 W18x35 W18x55 45 W18x35(T), W18x55(B) 67 CB27x40/55 W18x40 W18x55 47.5 27
ybar (in) 0.000 ybar (in) 0.000 e/tw 30 0 dt (in) 5.500 5.500 0 35.000 0.999 13.913 2.250 16.163 14.912 35.000 1.000 50.000 0.000 66 CB27x40/50 W18x40 W18x50 45 W18x40(T), W18x50(B) 69 CB27x46/50 W18x46 W18x50 48 27
Iyy (in^4) 10.356 Iyy (in^4) 28.758 2h/e 8 0 status: 0 35.833 0.944 13.452 2.125 15.577 14.396 35.833 location 0.4 m1 67 CB27x40/55 W18x40 W18x55 47.5 W18x40(T), W18x55(B) 56 CB24x40/57 W16x40 W16x57 48.5 24
1/3 Compression Web Section Properties: phi <43,>62 0 36.667 0.888 12.956 2.000 14.956 13.844 36.667 0.6 m2 68 CB27x40/65 W18x40 W18x65 52.5 W18x40(T), W18x65(B) 72 CB30x50 W21x50 W21x50 50 30
Top Tee Section Properties: Bottom Tee Section Properties: web slend. 161.667 0 BEAM NO. BEAM 37.500 0.833 12.422 1.875 14.297 13.254 37.500 69 CB27x46/50 W18x46 W18x50 48 W18x46(T), W18x50(B) 60 CB27x50 W18x50 W18x50 50 27
bf (in) 6.500 tf (in) 0.450 bf (in) 8.240 tf (in) 0.615 Pt. Loads N/A 0 1 B8X6.5 38.333 0.777 11.851 1.750 13.601 12.628 38.333 70 CB27x46/55 W18x46 W18x55 50.5 W18x46(T), W18x55(B) 48 CB24x50 W16x50 W16x50 50 24
tw (in) 0.350 dt (in) 5.921 tw (in) 0.400 dt (in) 4.269 stud hght.4.5''max/3.5''min 0 2 W8X10 39.167 0.722 11.244 1.625 12.869 11.966 39.167 71 CB30x44 W21x44 W21x44 44 W21x44 T&B 77 CB30x44/57 W21x44 W21x57 50.5 30
fill. rad (in) 0.300 gt (in) 5.471 fill. rad (in) 0.300 gt (in) 3.654 conc. cvr. 2" min 0 3 W8X13 40.000 0.666 10.600 1.500 12.100 11.266 40.000 72 CB30x50 W21x50 W21x50 50 W21x50 T&B 70 CB27x46/55 W18x46 W18x55 50.5 27
pi 3.142 pi 3.142 DesignOK 4 W8X15 40.833 0.611 9.919 1.375 11.294 10.530 40.833 73 CB30x57 W21x57 W21x57 57 W21x57 T&B 68 CB27x40/65 W18x40 W18x65 52.5 27
5 W8X18 41.667 0.555 9.201 1.250 10.451 9.756 41.667 74 CB30x62 W21x62 W21x62 62 W21x62 T&B 78 CB30x44/62 W21x44 W21x62 53 30
Strong Axis (X) Properties: Strong Axis (X) Properties: End Connections: 6 W8X21 42.500 0.500 8.447 1.125 9.572 8.946 42.500 75 CB30x68 W21x68 W21x68 68 W21x68 T&B 85 CB36x55 W24x55 W24x55 55 36
Area' ybar' Ixx' Ad^2' Area' ybar' Ixx' Ad^2' Seated 7 W8X24 43.333 0.444 7.656 1.000 8.656 8.100 43.333 76 CB30x44/50 W21x44 W21x50 47 W21x44(T), W21x50(B) 61 CB27x55 W18x55 W18x55 55 27
(in^2) (in) (in^4) (in^2) (in) (in^4) (in^4) 2 Web 8 W8X28 44.167 0.388 6.827 0.875 7.702 7.216 44.167 77 CB30x44/57 W21x44 W21x57 50.5 W21x44(T), W21x57(B) 79 CB30x44/68 W21x44 W21x68 56 30
Flange 2.925 5.696 0.049 3.966 Flange 5.068 3.961 0.160 1.154 Bearing 9 W8X31 45.000 0.333 5.962 0.750 6.712 6.295 45.000 78 CB30x44/62 W21x44 W21x62 53 W21x44(T), W21x62(B) 80 CB30x50/62 W21x50 W21x62 56 30
Stem 1.915 2.736 4.778 6.179 Stem 1.462 1.827 1.626 4.014 Left End 2 10 W8X35 45.833 0.277 5.061 0.625 5.686 5.338 45.833 79 CB30x44/68 W21x44 W21x68 56 W21x44(T), W21x68(B) 73 CB30x57 W21x57 W21x57 57 30
Fillets 0.039 5.404 0.000 0.029 Fillets 0.039 3.587 0.000 0.000 Right End 2 11 W8X40 46.667 0.222 4.122 0.500 4.622 4.344 46.667 80 CB30x50/62 W21x50 W21x62 56 W21x50(T), W21x62(B) 87 CB36x55/62 W24x55 W24x62 58.5 36
Steel Strength 12 B10X8.0 47.500 0.166 3.147 0.375 3.522 3.313 47.500 81 CB30x50/68 W21x50 W21x68 59 W21x50(T), W21x68(B) 81 CB30x50/68 W21x50 W21x68 59 30
Atee (in^2) 4.879 Sx-top (in^ 10.797 Atee (in^2) 6.568 Sx-top (in^3 8.863 1 36 13 B10X9.0 48.333 0.111 2.135 0.250 2.385 2.246 48.333 82 CB30x50/73 W21x50 W21x73 61.5 W21x50(T), W21x73(B) 88 CB36x55/68 W24x55 W24x68 61.5 36
ybar (in) 4.532 Sx-bot (in^ 3.310 ybar (in) 3.484 Sx-bot (in^3 1.996 2 50 14 W10X12 49.167 0.055 1.086 0.125 1.211 1.141 49.167 83 CB30x50/83 W21x50 W21x83 66.5 W21x50(T), W21x83(B) 82 CB30x50/73 W21x50 W21x73 61.5 30
Ixx (in^4) 15.002 Ixx (in^4) 6.954 36 1 15 W10X15 50.000 0.000 0.000 0.000 0.000 0.000 50.000 84 CB30x57/68 W21x57 W21x68 62.5 W21x57(T), W21x68(B) 86 CB36x62 W24x62 W24x62 62 36
xbar (in) 0.375 Zx (in^3) 5.878 xbar (in) 0.399 Zx (in^3) 3.860 16 W10X17 85 CB36x55 W24x55 W24x55 55 W24x55 T&B 74 CB30x62 W21x62 W21x62 62 30
Weak Axis (Y) Properties: Weak Axis (Y) Properties: Beam Selection-top 17 W10X19 86 CB36x62 W24x62 W24x62 62 W24x62 T&B 84 CB30x57/68 W21x57 W21x68 62.5 30
Area' ybar' Ixx' Ad^2' Area' ybar' Ixx' Ad^2' 1 W21x44 18 W10X22 87 CB36x55/62 W24x55 W24x62 58.5 W24x55(T), W24x62(B) 91 CB36x62/68 W24x62 W24x68 65 36
(in^2) (in) (in^4) (in^4) (in^2) (in) (in^4) (in^4) 19 W10X26 88 CB36x55/68 W24x55 W24x68 61.5 W24x55(T), W24x68(B) 89 CB36x55/76 W24x55 W24x76 65.5 36
Flange 2.925 0.000 10.298 0.000 Flange 5.068 0.000 28.673 0.000 Beam Selection-bottom 20 W10X30 89 CB36x55/76 W24x55 W24x76 65.5 W24x55(T), W24x76(B) 83 CB30x50/83 W21x50 W21x83 66.5 30
Stem 1.915 0.000 0.020 0.000 Stem 1.462 0.000 0.019 0.000 1 W21x62 21 W10X33 90 CB36x55/84 W24x55 W24x84 69.5 W24x55(T), W24x84(B) 75 CB30x68 W21x68 W21x68 68 30
Fillets 0.039 0.000 0.000 0.005 Fillets 0.039 0.000 0.000 0.005 22 W10X39 91 CB36x62/68 W24x62 W24x68 65 W24x62(T), W24x68(B) 92 CB36x62/76 W24x62 W24x76 69 36
23 W10X45 92 CB36x62/76 W24x62 W24x76 69 W24x62(T), W24x76(B) 90 CB36x55/84 W24x55 W24x84 69.5 36
Atee (in^2) 4.879 Sy (in^3) 3.176 Atee (in^2) 6.568 Sy (in^3) 6.966 add in beam wt? 1 24 B12X10.8 93 CB36x62/84 W24x62 W24x84 73 W24x62(T), W24x84(B) 93 CB36x62/84 W24x62 W24x84 73 36
ybar (in) 0.000 ybar (in) 0.000 1=yes, 2=no 25 B12X11.8 94 CB36x62/94 W24x62 W24x94 78 W24x62(T), W24x94(B) 94 CB36x62/94 W24x62 W24x94 78 36
Iyy (in^4) 10.323 Iyy (in^4) 28.698 26 W12X14 95 CB40x84 W27x84 W27x84 84 W27x84 T&B 95 CB40x84 W27x84 W27x84 84 40
Composite Section Properties: Concrete Strength Composite Act'n 27 W12X16 96 CB40x94 W27x94 W27x94 94 W27x94 T&B 97 CB40x84/94 W27x84 W27x94 89 40
3024.21477412 1 3000 1 full 28 W12X19 97 CB40x84/94 W27x84 W27x94 89 W27x84(T), W27x94(B) 98 CB40x84/102 W27x84 W27x102 93 40
n 9.589 Assume N.A. in Steel Section N.A. in Steel Section!! 2 3500 2 partial 29 W12X22 98 CB40x84/102 W27x84 W27x102 93 W27x84(T), W27x102(B) 96 CB40x94 W27x94 W27x94 94 40
beff 75.000 in ybarc 14.452 in ybar 26.8874131 in 3 4000 1 30 W12X26 78 CB30x44/62 W21x44 W21x62 53
Aconc 225.000 Ic 6017.509 in^4 Icc 6017.50853 in^4 4 4500 31 W12X30
Actr 23.464 Scc 686.727 in^3 Scc 686.727403 in^3 5 5000 Logical Composite 32 W12X35
ec 3.500 in S1 1599.301 in^3 S1 1599.30089 in^3 1 3000 Number percentage 33 W12X40
k 1 S2 3463.487 in^3 S2 3463.48745 in^3 1 100% 34 W12X45
1 for transient lds, 2 or 3 for sust'd S3 281.357 in^3 S3 281.357474 in^3 Concrete Weight 2 95% 35 W12X50
Ac-effec. 23.464 in^2 S4 223.804 in^3 S4 223.803923 in^3 1 110 3 90% 36 W14X22
Kc 0.666 2 115 4 85% 37 W14X26
yts 18.214 in 3 120 5 80% 38 W14X30
ybs 12.436 in Assume N.A. in Slab Allowable Shear in Concrete Slab 4 145 6 75% 39 W14X34
ycc 6.994 in Phi*Vc 8.380 kips 6017.50853 5 150 7 70% 40 W14X38
ybarc 16.221 in Ss 184.922085 in^3 223.803923 4 145 8 65% 41 W14X43
Ic 6293.886 in^4 Vh' 212.244 kips 26.8874131 9 60% 42 W14X48
Scc 899.957 in^3 Ieffec 6017.50853 in^4 Stud Diam. 10 55% 43 W14X53
S1 -3157.143 in^3 Seffec 223.803923 1 1/2" 0.5 11 50% 44 W14X61
S2 839.908 in^3 Old Vh' 211.492796 2 5/8" 0.625 12 45% 45 W16X26
S3 271.798 in^3 26.8874131 3 3/4" 0.75 13 40% 46 W16X31
S4 219.632 in^3 4 7/8" 0.875 1 100% 47 W16X36
3 0.75 48 W16X40
49 W16X45
Fully Composite Shear Studs Partial Composite Shear Studs 0.000 50 W16X50
2.5*tf_top Vh1(I4-1) Vh2(I4-2) Vh_min Red'n fact q N_half N_total S_req Ss Str 51 W16X57
1.125 286.875 212.244 212.244 1 11.5 19 38 220.78125 184.922 223.804 52 W18X35
Table I4.2 53 W18X40
wc Reduc. Fac max stud spac (8*(tc+hr) 40 in stud spac (in) 15.789 V'h N_half N_total 54 W18X46
90 0.73 min stud spac (6*ds) 4.5 in Stud Spac OK 19 38 55 W18X50
95 0.76 Table I4.1 56 W18X55
100 0.78 3000 3500 >=4000 Stud strength(vs. fc) Conc. Load Stud Dist. 57 W18X60
105 0.81 0.5 5.1 5.5 5.9 0.5 5.1 M @ CL1 M @ CL2 M @ CL3 M @ CL4 M max 58 W18X65
110 0.83 0.625 8 8.6 9.2 0.625 8 N/A N/A N/A N/A 441.5625 59 W18X71
115 0.86 0.75 11.5 12.5 13.3 0.75 11.5 60 W21X44
120 0.88 0.875 15.6 16.8 18 0.875 15.6 Beta N1 N2 N3 N4 N5 61 W21X50
Composite N half N half N full Vh' 1.2102606506 19 #VALUE! #VALUE! #VALUE! #VALUE! 62 W21X57
percentage dec. # rounded rounded kips 1st CL 2nd CL 3rd CL 4th CL 63 W21X62
100% 18.456 19 38 212.244 64 W21X68
95% 17.533 18 36 207.000 65 W21X73
90% 16.610 17 34 195.500 66 W21X83
85% 15.688 16 32 184.000 67 W21X93
80% 14.765 15 30 172.500 68 W24X55
75% 13.842 14 28 161.000 69 W24X62
70% 12.919 13 26 149.500 70 W24X68
65% 11.996 12 24 138.000 71 W24X76
Use Partial Composite? 1 1=full, 2=partial 60% 11.074 12 24 138.000 72 W24X84
55% 10.151 11 22 126.500 73 W24X94
50% 9.228 10 20 115.000 74 W27X84
Beta 1.21026065 45% 8.305 9 18 103.500 75 W27X94
N1 19.0 40% 7.382 8 16 92.000 if load, then 1 76 W27X102
Mmax (kip-ft) 441.563 @ 25.000 Loading is Symetric if no load, then 0 Check Load
Point Load # X X-prec X-follow M-prec. M-follow M-interp M-lookup M-used N2 N2-round Stutus Input order
1 0.00 0.00 2.25 0.00 #N/A #N/A 0.00 0.00 -90.364031 -91 No Load 0
2 0.00 0.00 2.25 0.00 #N/A #N/A 0.00 0.00 -90.364031 -91 No Load 0 0
3 0.00 0.00 2.25 0.00 #N/A #N/A 0.00 0.00 -90.364031 -91 No Load 0 0
4 0.00 0.00 2.25 0.00 #N/A #N/A 0.00 0.00 -90.364031 -91 No Load 0 0
0
Symetric Point Loads Only
One Point Load: Two Point Loads Three Point Loads Four Point Loads
N1 19 P1 & P2 Concentric P1, P2, P3 Concentric P1, P2, P3 Concentric 1 N=38,Uniformly Dist.
N2 -91 N1 19 N1 19 N1 19 2 N=38,Uniformly Dist.
Max Spac 1 0 N2 -91 N2 -91 N2 -91 3 N=38,Uniformly Dist.
Max Spac 2 15 Min Studs 4 N3 -91 N3 -91 4 N=38,Uniformly Dist.
Result-dist 0 | 19 Result-dist. 4 | 220 | 4 Min Studs 4 N4 -91 0 N=38,Uniformly Dist.
Result-un./dist. N=38,Uniformly Dist. Result-un./dist. N=38,Uniformly Dist. Result -dist 4 | 110 | 110 | 4 Min Studs 2
-1 4 Result-un./dist. N=38,Uniformly Dist. Result -dist 2 | 2 | 220 | 2 | 2
IS ODD IS EVEN 3 Result-un./di N=38,Uniformly Dist.
N=38,Uniformly Dist. IS ODD 2
IS EVEN

S HE AR & M OM E NT M ODULE - COM P OS I TE LOCAL BE NDI NG M ODULE - COM P OS I TE W E B P OS T & S HE AR S TRE S S M ODULE - COM P OS I TE D E F L E C T I O N M O D U L E - C O M P O S I T E - V I R T U A L W O R K M E T H O D (N O T U S E D!!!)
Uniform Dist. Load Point Load #1 Point Load #2 Point Load #3 Point Load #4 Shear & Moment Totals Extreme Results Consider 1st Web Post Stiffened? 1 1=yes,2=no Unit Load @ Mid Span Uniform Dist. Load Point Load #1 Point Load #2 Point Load #3 Point Load #4 DEAD L O AD DEF L ECT I O N
W TL (klf) 1.413 P (kips) 0 P (kips) 0 P (kips) 0 P (kips) 0 Location Compression Tension P (kips) 1 W TL (klf) 0.713 P (kips) 0 P (kips) 0 P (kips) 0 P (kips) 0
W DL (klf) 0.713 A (ft) 0.00 A (ft) 0.00 A (ft) 0.00 A (ft) 0.00 Strs. (ksi) INT. (#) Strs. (ksi) INT. (#) A (ft) 25 W DL (klf) 0.713 A (ft) 0 A (ft) 0 A (ft) 0 A (ft) 0 Ixt avg. 13.438 in^4 tw avg. 0.375 in
W LL (klf) 0.7 B (ft) 50 B (ft) 50 B (ft) 50 B (ft) 50 1 3.313 0.154 -3.746 0.158 B (ft) 25 W LL (klf) 0.7 B (ft) 50 B (ft) 50 B (ft) 50 B (ft) 50 h avg. 9.825 in A tee avg. 5.896 in^2
RL (kips) 0 RL (kips) 0 RL (kips) 0 RL (kips) 0 2 14.117 0.654 1.455 0.000 RL (kips) 0.5 RL (kips) 0 RL (kips) 0 RL (kips) 0 RL (kips) 0 A tweb 2.0625 in^2
RR (kips) 0 RR (kips) 0 RR (kips) 0 RR (kips) 0 3 -17.907 0.000 -21.399 0.901 Max Comp 3.313 14.117 -17.907 1.654 0.154 0.153 - 0.557 0.654 - 0.000 0.000 - 0.046 0.077 - RR (kips) -0.5 RR (kips) 0 RR (kips) 0 RR (kips) 0 RR (kips) 0 0
Mmax (kip-ft) 0 Mmax (kip-ft 0 Mmax (kip-ft 0 Mmax (kip-ft 0 4 1.654 0.077 -23.676 0.996 Max Tens. -3.746 1.455 -21.399 -23.676 - - 0.158 - - 0.000 - - 0.901 - - 0.996 Mmax (kip-ft 12.5 Mmax (kip-ft 0 Mmax (kip-ft 0 Mmax (kip-ft 0 Mmax (kip-ft 0 Total DL Deflection @ Mid Span 0.000
Per. DL (%) 0.5046001 Per. DL (%) 0% Per. DL (%) 0% Per. DL (%) 0% Per. DL (%) 0% + = Compression, - = Tension Concrete 1 2 3 4 INT. @ 1 INT. @ 2 INT. @ 3 INT. @ 4 Per. DL (%) Per. DL (%) 0.50460014 Per. DL (%) 0 Per. DL (%) 0 Per. DL (%) 0 Per. DL (%) 0 Summation of Panel Points 0.0000 0.0000 0.0000
X V M V M V M V M V M V - DL M - DL V - LL M - LL T-TL Opening X V-TL gross V-TL net M - TL Strees a b a b a b a b Sum @ 1 Sum @ 2 Sum @ 3 Sum @ 4 H 1-1 H 1-2 H2-1 H 1-1 H 1-2 H2-1 H 1-1 H 1-2 H2-1 H 1-1 H 1-2 H2-1 Web Post X V Sum V dM Opening X Vi Mi Ni Ti V M V M V M V M V M V-DL M-DL N T y1 y2 y3
(ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kip-ft) Location (ft) (kips) (kip-ft) (kip-ft) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (ksi) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) (#<1 OK) Location (ft) (kips) (kips) (kip-ft) Location (ft) (kips) (kip-ft) (kips) (kips) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kip-ft) (kips) (kips) (in) (in) (in)
0.000 35.325 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 17.825 0.000 17.500 0.000 0.000 Web Post 0.000 35.325 26.945 0.000 0.000 - - - - - - - - - - - - - - - - - - - - - - - - W.P. 1L 0 35.325 - - HO RI Z O NT AL SHE AR WEB POST BUCKL I NG Web Post 0.000 0.5000 0.0000 - - 17.8250 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 - - - -
1.458 33.264 50.013 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 16.785 25.237 16.479 24.776 50.013 Hole 1L 1.458 33.264 24.884 50.013 0.091 0.375 -4.121 0.173 13.944 -2.133 -17.938 -2.682 4.336 -3.746 14.117 -20.071 1.654 - - 0.158 0.557 0.654 - - - 0.845 0.046 0.077 - W.P. 2L 2.583 31.675 46.589 71.268 Method #1: (only for sym. Sxns.) Hole 1 1.458 0.5000 0.7292 0.3089 0.4766 16.7852 25.237 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
3.708 30.085 121.281 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 15.181 61.199 14.904 60.083 121.281 Hole 2L 3.708 30.085 21.705 121.281 0.221 0.910 -3.595 0.420 12.163 -5.173 -15.646 -6.503 3.782 -2.685 12.583 -20.819 -2.721 - - 0.113 0.498 0.583 - - - 0.876 - - 0.115 W.P. 3L 4.833 28.496 40.231 64.115 Top Tee Bot. Tee Top Section: Bottom Section: Hole 2 3.708 0.5000 1.8542 0.7855 0.4766 15.1810 61.199 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
5.958 26.906 185.396 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 13.577 93.551 13.329 91.845 185.396 Hole 3L 5.958 26.906 18.526 185.396 0.338 1.391 -3.068 0.642 10.381 -7.907 -13.355 -9.941 3.228 -1.677 11.023 -21.262 -6.713 - - 0.071 0.438 0.510 - - - 0.895 - - 0.283 W.P. 4L 7.083 25.316 33.872 56.962 af 2.925 5.068 in^2 e 8.000 in e 8.000 in Hole 3 5.958 0.5000 2.9792 1.2622 0.4766 13.5767 93.551 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
8.208 23.727 242.358 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 11.972 122.294 11.754 120.064 242.358 Hole 4L 8.208 23.727 15.346 242.358 0.442 1.818 -2.542 0.840 8.600 -10.337 -11.063 -12.995 2.674 -0.723 9.439 -21.399 -10.321 - - 0.030 0.378 0.437 - - - 0.901 - - 0.434 W.P. 5L 9.333 22.137 27.514 49.808 aw 5.149 5.950 in^2 b 5.500 in b 5.500 in Hole 4 8.208 0.5000 4.1042 1.7388 0.4766 11.9725 122.294 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
10.458 20.547 292.166 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 10.368 147.427 10.179 144.739 292.166 Hole 5L 10.458 20.547 12.167 292.166 0.532 2.192 -2.015 1.012 6.818 -12.461 -8.771 -15.665 2.120 0.177 7.830 -21.232 -13.545 0.023 0.008 - 0.316 0.363 - - - 0.894 - - 0.570 W.P. 6L 11.583 18.958 21.155 42.655 yf 14.935 15.183 in dt 5.500 in dt 5.500 in Hole 5 10.458 0.5000 5.2292 2.2154 0.4766 10.3682 147.427 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
12.708 17.368 334.821 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 8.764 168.951 8.604 165.870 334.821 Hole 6L 12.708 17.368 8.988 334.821 0.610 2.512 -1.489 1.160 5.037 -14.280 -6.479 -17.953 1.566 1.024 6.197 -20.759 -16.386 0.058 0.047 - 0.252 0.287 - - - 0.874 - - 0.690 W.P. 7L 13.833 15.779 14.797 35.502 yw 7.355 7.438 in s 27.000 in s 27.000 in Hole 6 12.708 0.5000 6.3542 2.6920 0.4766 8.7640 168.951 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
14.958 14.189 370.323 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 7.160 186.865 7.029 183.458 370.323 Hole 7L 14.958 14.189 5.809 370.323 0.675 2.779 -0.962 1.283 3.255 -15.794 -4.187 -19.856 1.012 1.817 4.538 -19.982 -18.844 0.092 0.084 - 0.188 0.210 - - - 0.841 - - 0.793 W.P. 8L 16.083 12.599 8.438 28.348 V 31.675 31.675 kips h 9.660 in h 9.990 in Hole 7 14.958 0.5000 7.4792 3.1686 0.4766 7.1597 186.865 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
17.208 11.010 398.671 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 5.555 201.169 5.454 197.501 398.671 Hole 8L 17.208 11.010 2.629 398.671 0.726 2.991 -0.436 1.381 1.473 -17.003 -1.896 -21.376 0.458 2.556 2.855 -18.899 -20.918 0.122 0.118 - 0.122 0.132 - - - 0.795 - - 0.880 W.P. 9L 18.333 9.420 2.629 21.195 Igross 2565.713 2565.713 in^4 y bar tee 4.245 in y bar tee 4.429 in Hole 8 17.208 0.5000 8.6042 3.6452 0.4766 5.5555 201.169 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
19.458 7.830 419.866 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 3.951 211.864 3.879 208.001 419.866 Hole 9L 19.458 7.830 0.000 419.866 0.765 3.150 0.000 1.455 0.000 -17.907 0.000 -22.513 0.000 3.150 1.455 -17.907 -22.513 0.147 0.146 - 0.068 0.067 - - - 0.754 - - 0.947 W.P. 10L 20.583 6.241 0.000 14.042 S 27.000 27.000 in Hole 9 19.458 0.5000 9.7292 4.1219 0.4766 3.9512 211.864 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
21.708 4.651 433.908 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 2.347 218.950 2.304 214.958 433.908 Hole 10L 21.708 4.651 0.000 433.908 0.791 3.256 0.000 1.503 0.000 -18.506 0.000 -23.265 0.000 3.256 1.503 -18.506 -23.265 0.152 0.151 - 0.070 0.070 - - - 0.779 - - 0.979 W.P. 11L 22.833 3.062 0.000 6.888 e 8.000 8.000 in Vmax 31.675 kips Vmax 31.675 kips Hole 10 21.708 0.5000 10.8542 4.5985 0.4766 2.3470 218.950 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
23.958 1.472 440.796 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.743 222.426 0.729 218.370 440.796 Hole 11L 23.958 1.472 0.000 440.796 0.803 3.307 0.000 1.527 0.000 -18.800 0.000 -23.635 0.000 3.307 1.527 -18.800 -23.635 0.154 0.153 - 0.071 0.071 - - - 0.791 - - 0.995 W.P. 12L 24.479 0.736 0.000 0.767 fv-horiz. 9.708 12.624 ksi Vh 30.752 kips Vh 29.655 kips Hole 11 23.958 0.5000 11.9792 5.0751 0.4766 0.7427 222.426 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 441.563 Hole 12L 25.000 0.000 0.000 441.563 0.805 3.313 0.000 1.530 0.000 -18.833 0.000 -23.676 0.000 3.313 1.530 -18.833 -23.676 0.154 0.153 - 0.071 0.071 - - - 0.793 - - 0.996 Not Used! 25.000 - - - Fv 14.400 14.400 ksi Macutal 297.061 kip-in M 296.256 kip-in Hole 12 26.208 -0.5000 11.8958 5.0398 0.4766 -0.8615 222.292 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interac'n: 0.674 0.877 OK!! Mp 1137.150 kip-in Mp 1299.600 kip-in Hole 13 28.458 -0.5000 10.7708 4.5632 0.4766 -2.4658 218.549 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - 2h/e 2.415 2h/e 2.498 Hole 14 30.708 -0.5000 9.6458 4.0866 0.4766 -4.0700 211.196 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Method #2: e/tw 22.857 e/tw 20.000 Hole 15 32.958 -0.5000 8.5208 3.6099 0.4766 -5.6743 200.234 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Top Tee Bot. Tee Mocr/Mp 0.472 Mocr/Mp 0.472 Hole 16 35.208 -0.5000 7.3958 3.1333 0.4766 -7.2785 185.662 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Max dM 71.268 71.268 kip-ft Mocr 537.118 kip-in Mocr 613.849 kip-in Hole 17 37.458 -0.5000 6.2708 2.6567 0.4766 -8.8828 167.480 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Vh 30.193 30.193 kips Mallow 321.628 kip-in Mallow 367.574 kip-in Hole 18 39.708 -0.5000 5.1458 2.1801 0.4766 -10.4870 145.689 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - fv-horiz. 10.783 9.435 ksi F.S. 0.924 OK!! F.S. 0.806 OK!! Hole 19 41.958 -0.5000 4.0208 1.7035 0.4766 -12.0913 120.288 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Fv 14.400 14.400 ksi Hole 20 44.208 -0.5000 2.8958 1.2268 0.4766 -13.6955 91.278 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interac'n: 0.749 0.655 OK!! For Phi=58 to 62 deg Hole 21 46.458 -0.5000 1.7708 0.7502 0.4766 -15.2998 58.658 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Hole 22 48.708 -0.5000 0.6458 0.2736 0.4766 -16.9040 22.429 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Method #3: e/tw =10 y=0.58719*0.91662^x e/tw =10 y=0.58719*0.91662^x Not Used! 50.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Top Tee Bot. Tee e/tw = 20 y=1.96021*0.69931^x e/tw = 20 y=1.96021*0.69931^x Not Used! 53.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Max SumV 46.589 46.589 kip-ft e/tw = 30 y=2.55139*0.57367^x e/tw = 30 y=2.55139*0.57367^x Not Used! 55.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Vh 22.205 22.205 kips Not Used! 57.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - fv-horiz. 7.930 6.939 ksi actual e/tw: 22.857 actual e/tw: 20.000 Not Used! 59.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Fv 14.400 14.400 ksi actual 2h/e: 2.415 actual 2h/e: 2.498 Not Used! 62.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interac'n: 0.551 0.482 OK!! Not Used! 64.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 10 0.472 e/tw = 10 0.472 Not Used! 66.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - VERT I CAL SHEAR e/tw = 20 0.472 e/tw = 20 0.472 Not Used! 68.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Net Sxn. Gross Sxn. e/tw = 30 0.472 e/tw = 30 0.472 Not Used! 71.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Vmax 35.325 35.325 kips Not Used! 73.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - av 4.125 11.502 in^2 e/tw <10 0.472 e/tw <10 0.472 Not Used! 75.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - fv-vert. 8.564 3.071 ksi 10<e/tw<20 0.472 10<e/tw<20 0.472 Not Used! 77.958 - - - - - - - - - - - - - - - - - - - - -
CENT ER L I NE BEAM CENT ER L I NE BEAM CENT ER L I NE BEAM Fv 14.400 14.400 ksi 20<e/tw<30 0.472 20<e/tw<30 0.472 Not Used! 80.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Interac'n: 0.595 0.213 OK!! Mp/Mocr 0.472 Mp/Mocr 0.472 Not Used! 82.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - For 2h/e = 22.857, Mp/Mocr = 0.472 For 2h/e = 20, Mp/Mocr = 0.472 Not Used! 84.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 86.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - For Phi=43 to 47 deg Not Used! 89.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 91.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw =10 y=0.351429-0.05119x+0.002619x^2 Not Used! 93.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 20 y=3.275857-1.208333x+0.154286x^2-0.006667x^3 Not Used! 95.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 30 y=3.275857-1.208333x+0.154286x^2-0.006667x^3 Not Used! 98.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 100.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - actual e/tw: 22.857 actual e/tw: 20.000 Not Used! 102.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - actual 2h/e: 2.415 actual 2h/e: 2.498 Not Used! 104.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 107.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 10 0.243 e/tw = 10 0.240 Not Used! 109.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 20 0.243 e/tw = 20 0.240 Not Used! 111.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw = 30 0.243 e/tw = 30 0.240 Not Used! 113.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 116.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - e/tw <10 0.243 e/tw <10 0.240 Not Used! 118.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - 10<e/tw<20 0.243 10<e/tw<20 0.240 Not Used! 120.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - 20<e/tw<30 0.243 20<e/tw<30 0.240 Not Used! 122.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Mp/Mocr 0.243 Mp/Mocr 0.240 Not Used! 125.208 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - For e/tw = 22.857, Mp/Mocr = 0.243 For e/tw = 20, Mp/Mocr = 0.24 Not Used! 127.458 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Not Used! 129.708 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 - Not Used! 25.000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - Not Used! 25.000 - - - Interpolate For Bending F.S. Interpolate For Mp/Mocr F.S. Not Used! 131.958 - - - - - - - - - - - - - - - - - - - - -
25.000 0.000 441.563 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 222.813 0.000 218.750 441.563 Hole 12R 25.000 0.000 0.000 441.563 0.805 3.313 0.000 1.530 0.000 -18.833 0.000 -23.676 0.000 3.313 1.530 -18.833 -23.676 0.154 0.153 - 0.071 0.071 - - - 0.793 - - 0.996 Not Used! 25.000 - - - Phi (deg) Bending F.S. For phi=43-62 degrees-interpolated Not Used! 134.208 - - - - - - - - - - - - - - - - - - - - -
26.042 -1.472 440.796 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -0.743 222.426 -0.729 218.370 440.796 Hole 11R 26.042 1.472 0.000 440.796 0.803 3.307 0.000 1.527 0.000 -18.800 0.000 -23.635 0.000 3.307 1.527 -18.800 -23.635 0.154 0.153 - 0.071 0.071 - - - 0.791 - - 0.995 W.P. 12R 25.521 0.736 0.000 0.767 47 1.67 Not Used! 136.458 - - - - - - - - - - - - - - - - - - - - -
28.292 -4.651 433.908 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -2.347 218.950 -2.304 214.958 433.908 Hole 10R 28.292 4.651 0.000 433.908 0.791 3.256 0.000 1.503 0.000 -18.506 0.000 -23.265 0.000 3.256 1.503 -18.506 -23.265 0.152 0.151 - 0.070 0.070 - - - 0.779 - - 0.979 W.P. 11R 27.167 3.062 0.000 6.888 52.5 2.5 Not Used! 138.708 - - - - - - - - - - - - - - - - - - - - -
30.542 -7.830 419.866 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -3.951 211.864 -3.879 208.001 419.866 Hole 9R 30.542 7.830 0.000 419.866 0.765 3.150 0.000 1.455 0.000 -17.907 0.000 -22.513 0.000 3.150 1.455 -17.907 -22.513 0.147 0.146 - 0.068 0.067 - - - 0.754 - - 0.947 W.P. 10R 29.417 6.241 0.000 14.042 58 1.67 Top Tee Section Bottom Tee Section Not Used! 140.958 - - - - - - - - - - - - - - - - - - - - -
32.792 -11.010 398.671 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -5.555 201.169 -5.454 197.501 398.671 Hole 8R 32.792 11.010 2.629 398.671 0.726 2.991 -0.436 1.381 1.473 -17.003 -1.896 -21.376 0.458 2.556 2.855 -18.899 -20.918 0.122 0.118 - 0.122 0.132 - - - 0.795 - - 0.880 W.P. 9R 31.667 9.420 2.629 21.195 phi Mp/Mocr phi Mp/Mocr Not Used! 143.208 - - - - - - - - - - - - - - - - - - - - -
35.042 -14.189 370.323 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -7.160 186.865 -7.029 183.458 370.323 Hole 7R 35.042 14.189 5.809 370.323 0.675 2.779 -0.962 1.283 3.255 -15.794 -4.187 -19.856 1.012 1.817 4.538 -19.982 -18.844 0.092 0.084 - 0.188 0.210 - - - 0.841 - - 0.793 W.P. 8R 33.917 12.599 8.438 28.348 Phi-Top 60.345 47 0.2431 47 0.2399 Not Used! 145.458 - - - - - - - - - - - - - - - - - - - - -
37.292 -17.368 334.821 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -8.764 168.951 -8.604 165.870 334.821 Hole 6R 37.292 17.368 8.988 334.821 0.610 2.512 -1.489 1.160 5.037 -14.280 -6.479 -17.953 1.566 1.024 6.197 -20.759 -16.386 0.058 0.047 - 0.252 0.287 - - - 0.874 - - 0.690 W.P. 7R 36.167 15.779 14.797 35.502 F.S.-Top 1.316 1.670 58 0.4723 58 0.4723 Not Used! 147.708 - - - - - - - - - - - - - - - - - - - - -
39.542 -20.547 292.166 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -10.368 147.427 -10.179 144.739 292.166 Hole 5R 39.542 20.547 12.167 292.166 0.532 2.192 -2.015 1.012 6.818 -12.461 -8.771 -15.665 2.120 0.177 7.830 -21.232 -13.545 0.023 0.008 - 0.316 0.363 - - - 0.894 - - 0.570 W.P. 6R 38.417 18.958 21.155 42.655 Phi-Bot. 61.165 60.345 0.5212 61.165 0.5392 Not Used! 149.958 - - - - - - - - - - - - - - - - - - - - -
41.792 -23.727 242.358 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -11.972 122.294 -11.754 120.064 242.358 Hole 4R 41.792 23.727 15.346 242.358 0.442 1.818 -2.542 0.840 8.600 -10.337 -11.063 -12.995 2.674 -0.723 9.439 -21.399 -10.321 - - 0.030 0.378 0.437 - - - 0.901 - - 0.434 W.P. 5R 40.667 22.137 27.514 49.808 F.S. Bot. 1.192 1.670 Actual Mp/M 0.4723 Actual Mp/M 0.4723 Not Used! 152.208 - - - - - - - - - - - - - - - - - - - - -
44.042 -26.906 185.396 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -13.577 93.551 -13.329 91.845 185.396 Hole 3R 44.042 26.906 18.526 185.396 0.338 1.391 -3.068 0.642 10.381 -7.907 -13.355 -9.941 3.228 -1.677 11.023 -21.262 -6.713 - - 0.071 0.438 0.510 - - - 0.895 - - 0.283 W.P. 4R 42.917 25.316 33.872 56.962 Not Used! 154.458 - - - - - - - - - - - - - - - - - - - - -
46.292 -30.085 121.281 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -15.181 61.199 -14.904 60.083 121.281 Hole 2R 46.292 30.085 21.705 121.281 0.221 0.910 -3.595 0.420 12.163 -5.173 -15.646 -6.503 3.782 -2.685 12.583 -20.819 -2.721 - - 0.113 0.498 0.583 - - - 0.876 - - 0.115 W.P. 3R 45.167 28.496 40.231 64.115 Not Used! 156.708 - - - - - - - - - - - - - - - - - - - - -
48.542 -33.264 50.013 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -16.785 25.237 -16.479 24.776 50.013 Hole 1R 48.542 33.264 24.884 50.013 0.091 0.375 -4.121 0.173 13.944 -2.133 -17.938 -2.682 4.336 -3.746 14.117 -20.071 1.654 - - 0.158 0.557 0.654 - - - 0.845 0.046 0.077 - W.P. 2R 47.417 31.675 46.589 71.268 Not Used! 158.958 - - - - - - - - - - - - - - - - - - - - -
50.000 -35.325 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 -17.825 0.000 -17.500 0.000 0.000 Web Post 50.000 35.325 26.945 0.000 0.000 - - - - - - - - - - - - - - - - - - - - - - - - W.P. 1R 50.000 35.325 - - Not Used! 161.208 - - - - - - - - - - - - - - - - - - - - -

Precomposite + Composite Stresses

Sum @ 1 Sum @ 2 Sum @ 3 Sum @ 4

(ksi) (ksi) (ksi) (ksi)
- - - -
 D E F L E C T I O N M O D U L E - 110% O F P R I S M A T I C
DEAD L O AD DEF L ECT I O N Ixtr 6017.509 in^4 Maximum Delfection 0.564086704
w-dl 0.059 kips/in 1064
w-ll 0.05833 kips/in
P (kips) 0.00 0.00 0.00 0.00
A (in) 0 0 0 0
392 B (in) 600 600 600 600
Total LL Deflection @ Mid Span 1.532
0.0000 0.0000 Summation of Panel Points 0.0053 0.0165 1.4608 0.0169 0.0327 Unf'rm Ld. Point Loads Summation
y4 y5 V-LL M-LL N T y1 y2 y3 y4 y5 X LL deflec. LL - P1 LL - P2 LL - P3 LL - P4 LL - deflec
(in) (in) (kips) (kip-ft) (kips) (kips) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in) (in)
- - 17.8250 0.0000 0.0000 - - - - - - 0.000 0.000 0.000 0.000 0.000 0.000 0.000
0.0000 0.0000 16.7852 25.2366 10.6917 16.4958 0.0005 0.0015 0.0010 0.0015 0.0029 17.500 -0.053 0.000 0.000 0.000 0.000 -0.053
0.0000 0.0000 15.1810 61.1985 25.9274 15.2356 0.0004 0.0014 0.0064 0.0013 0.0027 44.500 -0.132 0.000 0.000 0.000 0.000 -0.132
0.0000 0.0000 13.5767 93.5509 39.6338 13.7064 0.0004 0.0012 0.0158 0.0012 0.0024 71.500 -0.209 0.000 0.000 0.000 0.000 -0.209
0.0000 0.0000 11.9725 122.2937 51.8110 12.1772 0.0003 0.0011 0.0285 0.0010 0.0021 98.500 -0.282 0.000 0.000 0.000 0.000 -0.282
0.0000 0.0000 10.3682 147.4270 62.4589 10.6480 0.0003 0.0009 0.0437 0.0009 0.0019 125.500 -0.348 0.000 0.000 0.000 0.000 -0.348
0.0000 0.0000 8.7640 168.9507 71.5776 9.1187 0.0002 0.0008 0.0609 0.0008 0.0016 152.500 -0.407 0.000 0.000 0.000 0.000 -0.407
0.0000 0.0000 7.1597 186.8648 79.1671 7.5895 0.0002 0.0007 0.0792 0.0006 0.0013 179.500 -0.458 0.000 0.000 0.000 0.000 -0.458
0.0000 0.0000 5.5555 201.1694 85.2274 6.0603 0.0002 0.0005 0.0981 0.0005 0.0011 206.500 -0.499 0.000 0.000 0.000 0.000 -0.499
0.0000 0.0000 3.9512 211.8644 89.7585 4.5310 0.0001 0.0004 0.1169 0.0003 0.0008 233.500 -0.531 0.000 0.000 0.000 0.000 -0.531
0.0000 0.0000 2.3470 218.9498 92.7603 3.0018 0.0001 0.0003 0.1347 0.0002 0.0005 260.500 -0.552 0.000 0.000 0.000 0.000 -0.552
0.0000 0.0000 0.7427 222.4257 94.2329 1.4726 0.0000 0.0001 0.1510 0.0001 0.0003 287.500 -0.563 0.000 0.000 0.000 0.000 -0.563
0.0000 0.0000 -0.8615 222.2920 94.1762 0.7646 0.0000 0.0001 0.1499 0.0001 0.0001 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -2.4658 218.5487 92.5904 1.5859 0.0001 0.0001 0.1334 0.0002 0.0003 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -4.0700 211.1959 89.4753 3.1151 0.0001 0.0003 0.1155 0.0004 0.0005 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -5.6743 200.2335 84.8309 4.6443 0.0002 0.0004 0.0967 0.0005 0.0008 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -7.2785 185.6616 78.6574 6.1735 0.0002 0.0005 0.0778 0.0006 0.0011 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -8.8828 167.4801 70.9546 7.7028 0.0002 0.0007 0.0595 0.0008 0.0014 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -10.4870 145.6890 61.7226 9.2320 0.0003 0.0008 0.0425 0.0009 0.0016 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -12.0913 120.2884 50.9614 10.7612 0.0003 0.0010 0.0274 0.0011 0.0019 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -13.6955 91.2782 38.6709 12.2905 0.0004 0.0011 0.0150 0.0012 0.0022 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -15.2998 58.6585 24.8513 13.8197 0.0004 0.0012 0.0059 0.0013 0.0024 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
0.0000 0.0000 -16.9040 22.4292 9.5023 15.3489 0.0005 0.0014 0.0008 0.0015 0.0027 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - CENT ER L I NE BEAM
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 300.000 -0.564 0.000 0.000 0.000 0.000 -0.564
- - - - - - - - - - - 312.500 -0.563 0.000 0.000 0.000 0.000 -0.563
- - - - - - - - - - - 339.500 -0.552 0.000 0.000 0.000 0.000 -0.552
- - - - - - - - - - - 366.500 -0.531 0.000 0.000 0.000 0.000 -0.531
- - - - - - - - - - - 393.500 -0.499 0.000 0.000 0.000 0.000 -0.499
- - - - - - - - - - - 420.500 -0.458 0.000 0.000 0.000 0.000 -0.458
- - - - - - - - - - - 447.500 -0.407 0.000 0.000 0.000 0.000 -0.407
- - - - - - - - - - - 474.500 -0.348 0.000 0.000 0.000 0.000 -0.348
- - - - - - - - - - - 501.500 -0.282 0.000 0.000 0.000 0.000 -0.282
- - - - - - - - - - - 528.500 -0.209 0.000 0.000 0.000 0.000 -0.209
- - - - - - - - - - - 555.500 -0.132 0.000 0.000 0.000 0.000 -0.132
- - - - - - - - - - - 582.500 -0.053 0.000 0.000 0.000 0.000 -0.053
- - - - - - - - - - - 600.000 0.000 0.000 0.000 0.000 0.000 0.000