Scribd
Upload
113 views20 pages

Propagation Mechanisms: 3 Types

This document discusses three key propagation mechanisms - reflection, diffraction, and scattering - that impact radio wave propagation in mobile communication systems. Reflection occurs when signals bounce off surfaces like buildings and earth. Diffraction is when waves bend around obstacles. Scattering happens when radio signals are deflected by objects smaller than the wavelength, like trees and signs. Models for predicting received power levels are based on how these mechanisms affect propagation over large areas.

Uploaded by

Armanul Haque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
113 views20 pages

Propagation Mechanisms: 3 Types

This document discusses three key propagation mechanisms - reflection, diffraction, and scattering - that impact radio wave propagation in mobile communication systems. Reflection occurs when signals bounce off surfaces like buildings and earth. Diffraction is when waves bend around obstacles. Scattering happens when radio signals are deflected by objects smaller than the wavelength, like trees and signs. Models for predicting received power levels are based on how these mechanisms affect propagation over large areas.

Uploaded by

Armanul Haque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

PROPAGATION MECHANISMS

3 TYPES
PROPAGATION MECHANISMS
We next discuss propagation mechanisms
(Reflection, Diffraction, and Scattering) because:

 They have an impact on the wave propagation in a


mobile communication system

 The most important parameter, Received power is


predicted by large scale propagation models based on
the physics of reflection, diffraction and scattering
THREE BASIC PROPAGATION
MECHANISMS
 Reflection : occurs when a signal is transmitted, some of
the signal power may be reflected back to its origin
rather than being carried all the way.
 Diffraction :The apparent bending of waves around
small obstacles and the spreading out of waves past small
openings.
 Scattering is a general physical process where light,
sound, or moving particles, are forced to deviate from a
straight trajectory, by one or more localized non-
uniformities, in the medium through which they pass.
Three Basic Propagations

 Reflection
 Large buildings, earth surface

 Diffraction
 Obstacles with dimensions in order of lambda

 Scattering
 Obstacles with size in the order of the wavelength of
the signal or less
 Foliage, lamp posts, street signs, walking pedestrian, etc.
Multipath Propagation
Reflection
 When a radio wave propagating in one medium impinges
upon another medium having different electrical
properties, the wave is partially reflected and partially
transmitted

 Fresnel Reflection Coefficient (Γ) gives the relationship


between the electric field intensity of the reflected and
transmitted waves to the incident wave in the medium of
origin

 The Reflection Coefficient is a function of the material


properties, depending on
 Wave Polarization (direction of vibration-propagation: orientation)
 Angle of Incidence
 Frequency of the propagating wave
Ground Reflection (2- ray) Model

 In a mobile radio channel, a single direct path between the base


station and mobile is rarely the only physical path for
propagation
 Hence the free space propagation model in most cases is
inaccurate when used alone
 The 2- ray GRM is based on geometric optics
 It considers both- direct path and ground reflected propagation
path between transmitter and receiver
 This was found reasonably accurate for predicting large scale
signal strength over distances of several kilometers for mobile
radio systems using tall towers ( heights above 50 m ), and also
for L-O-S micro cell channels in urban environments
Diffraction
 Phenomena: Radio signal can propagate around the curved
surface of the earth, beyond the horizon and behind
obstructions.

 Although the received field strength decreases rapidly as a


receiver moves deeper into the obstructed ( shadowed ) region,
the diffraction field still exists and often has sufficient strength
to produce a useful signal.

 The field strength of a diffracted wave in the shadowed region


is the vector sum of the electric field components of all the
secondary wavelets in the space around the obstacles.
Knife-edge Diffraction Model
 It is essential to estimate the signal attenuation caused by
diffraction of radio waves over hills and buildings in
predicting the field strength in the given service area.

 In practice, prediction for diffraction loss is a process of


theoretical approximation modified by necessary
empirical corrections.

 The simplest case: shadowing is caused by a single


object such as a hill or mountain.
Diffraction Geometry
Parameters
 Fresnel-Kirchoff diffraction parameter
2(d1 + d 2 ) 2d1d 2
v=h =α
λd1d 2 λ (d1 + d 2 )

 The electric field strength Ed,


Ed 1+ j ∞ jπt 2
E0
= F (v ) =
2 ∫v
exp(−
2
)dt

where E0 is the free space field strength


 The diffraction gain:
Gd (dB) = 20 log | F (v) |
Graphical representation
Lee’s Approximate
Multiple Knife-edge Diffraction

 In the practical situations, especially in hilly terrain,


the propagation path may consist of more than on
obstruction.
 Optimistic solution (by Bullington): The series of
obstacles are replaced by a single equivalent
obstacle so that the path loss can be obtained using
single knife-edge diffraction models.
Note

 The actual received signal in a mobile radio


environment is often stronger than what is
predicted by reflection and diffraction

 Reason:
When a radio wave impinges on a rough
surface,the reflected energy is spread in all
directions due to scattering
Scattering Loss Factor
ρs = exp[-8(Πσhsinθi)2]I0[8(Πσhcosθi)2]
where ,
I0 is the Bessel function of the first kind and
zero order
σh is the standard deviation of the surface
height, h about the mean surface height
θi is the angle of incidence
Radar cross section model

 The radar cross section of a scattering object is


defined as the ratio of the power density of the signal
scattered in the direction of the receiver to the power
density of the radio wave incident upon the scattering
object, and has units of square meters.

Why do we require this?


 In radio channels where large, distant objects induce

scattering, the physical location of such objects can be


used to accurately predict scattered signal strengths.
Continues

 For urban mobile radio systems ,models based on the


bistatic radar equation is used to compute the received
power due to scattering in the far field.

 The bistatic radar equation describes the propagation of a


wave traveling in free space which impinges on a distant
scattering object, and is the reradiated in the direction of
the receiver, given by
PR (dBm) = PT (dBm) + G T (dBi) + 20log(λ ) + RCS[dBm 2 ] - 30log(4π ) - 20logd T - 20logd R
Continues

 Where dT and dR are the distance from the scattering


object to the transmitter and receiver respectively.

 In the above equation the scattering object is


assumed to be in the(far field) Fraunhofer region of
both the transmitter and receiver and is useful for
predicting receiver power which scatters off large
objects such as buildings, which are for both the
transmitter and receiver.
3 PROPAGATION MECHANISMS

THE END

You might also like