VAG MIBx Solution
VAG MIBx Solution
MIB1/MIB2 Wiki:
Wiki:
0. Password list
Know passwords used in VAG MIBx MMI platform:
1. RED MENU
How to enter "Red Menu":
2. GREEN MENU
Firstly you need to activate Green Menu in 5F module via VCP:
1. Engineer mode
2. Security Access 20103
3. Developer mode- activated (option no 45 or 50)
GREEN MENU (Engineering Menu) can be powered on with common key combination:
Change your network settings: Network and Internet -> Change adapter settings -> Local Area Connection Properties -> Properties -> Check and choose "Properties"
on: Internet Protocol Version 4 (TCP/IPv4). Then make settings like on picture:
0aa100bb -> where "aa" is car model, "bb" is MapCare limited time license, "1" is USA market (need to be changed to "0"), for example:
0aa000bb.
For Audi:
14 -> Q1 2015
18 -> Q1 2016
1C -> Q1 2017
1E -> Q3 2017
20 -> Q1 2018
24 -> Q1 2019
28 -> Q1 2020
2F -> Q4 2021
If you want to add Apple CarPlay/Android Auto feature to your car, you must to add three codes to the *.fec file: 00060300, 00060800, 00060900. Click "+" button in
WhatTheFec and add codes one by one.
Patches math only version for which they are!!! So if you have MHIG_EU_AU_K1549 firmware installed in unit you cannot use patch for MHIG_EU_AU_P1048 avoiding
MMI unit damage! If in patch pack there is no patch matching yours unit firmware you need to update firmware. Prepare card with firmware acording to your car model and
navigation generation (MIB1 for MIB1 4GB card or bigger, MIB2 for MIB2 8GB card, MIB2.5 for MIB 2.5 8GB card). Before putting files to card you must fully-format this
card to FAT32, then unpack files to the card. Also you can put to card firmware folders with patches (_patch and _patch_CP). When firmware update is done (perform this
operation from RED MENU with card putted to SD1 slot - like in 3G-series MMI) firsly you need to patch firmware. Leave card with patched files in SD1 slot, login to
172.16.250.248:123 console and put those command to the unit (you can copy direclty to console window by clicking MOUSE RIGHT BUTTON):
flashlock
/usr/apps/mib2_ioc_flash reboot
Component Protection patch (error in 5F will be exist but system will works normal). Patched IFS-ROOT.ifs can be installed with those commands: (FEC + CP):
mount -uw /net/mmx/fs/sda0/
flashunlock
flashlock
/usr/apps/mib2_ioc_flash reboot
After replacing *.fec you must restart unit (old MIB: MENU + KNOB + RIGHT UPPER SOFTKEY, new MIB: NAV/MAP + RADIO + KNOB, other VAG units: put down on
hold POWER button for 45 sec.).
Maps can be downloaded from here (P177 2019/2020). Unpack files to 32GB card fully-formatted to FAT32.
Map should be updated from "Settings menu -> Update system -> Update from: SD1", not from "RED MENU". Map update will take around 1h.
Connect to 5F module, go to "Adaptation", from list choose "Car Configuration" and make changes:
Google_GAL -> ON
Apple_DIO -> ON
Mirror_link -> ON
Smartphone_interface_for_rhmi -> ON
Unpack files from Developer menu MIB2.7z (folder engdefs) to SD card fully-formatted to FAT32. Login to 172.16.250.248:23 console and put comands:
mount -uw /net/mmx/fs/sda0/
/bin/mount -uw /mnt/app/
cp -Mqnx -r /net/mmx/fs/sda0/engdefs /mnt/app/eso/hmi/engdefs/
If unit that you need to convert is not on this list please contact!
If modyfications are done restart unit, wait for system load and open Green Menu. Go to SWDL -> Check: User Defined SWDL and then SWDL -> development -> Check:
Ignore Region and Variant:
Now put to SD1 SD Card with EU firmware, open RED MENU, go to Update -> SD1 -> User-defined -> All (uncheck ONLY Bose/Bang&Olufsen or any other external
audio system avoiding audio failure). Update process can take ~1h.
When update is ready unit will start without EU languges. Now you must perform parametrization with VCP. Go to Can Procedures -> Apps -> Data Container Loading,
check 5F module and load file:
In data container and check VISIBLE_LANGUAGES_EU or AVAIBLE_LANGUAGES_EU push Load Data. Restart unit, full EU language list will be present on MENU.
Go to Adaptation:
VEHICLE CONFIGURATION: SDS_Region_F: REGION_EU
When those modyfications are ready now you can go to System patch, *.FEC edit, disable Component Protection and install map.