Scribd
Upload
27 views5 pages

Huong Dan

This code summarizes a circuit diagram and code for displaying weight measurements from a load cell on an LCD screen. The code initializes the LCD screen and reads weight values from the load cell connected to an HX711 module. It then displays the weight in grams or kilograms on the LCD screen by extracting the individual digit places and updating the display in a loop.

Uploaded by

Niall Peterson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
27 views5 pages

Huong Dan

This code summarizes a circuit diagram and code for displaying weight measurements from a load cell on an LCD screen. The code initializes the LCD screen and reads weight values from the load cell connected to an HX711 module. It then displays the weight in grams or kilograms on the LCD screen by extracting the individual digit places and updating the display in a loop.

Uploaded by

Niall Peterson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Sơ đồ mạch

Sơ đồ mạch in

//Code

#include <16F877A.h>

#device ADC=10

#use delay(clock = 20000000) //Su dung thach anh 20Mhz

#fuses HS,NOWDT,PROTECT,BROWNOUT,PUT,NOLVP,NOCPD,NOWRT,NOCPD //Fuse bituse fast_io(C)

#use fast_io(D)

#define LCD_DB4 PIN_B3

#define LCD_DB5 PIN_B2

#define LCD_DB6 PIN_B1

#define LCD_DB7 PIN_B0


#define LCD_E PIN_B4

#define LCD_RS PIN_B5

#include <lcd16x2.c>

//hx711

#define ADDO PIN_D0

#define ADSK PIN_C3

//read weigh loadcell

unsigned int32 ReadCount(){

unsigned int32 Count = 0;

unsigned int8 i, convert_1, convert_2, convert_3;

output_high(ADDO);

output_low(ADSK);

Count=0;

while(input(ADDO));

for (i=0;i<24;i++){

output_high(ADSK);

Count=Count<<1;

output_low(ADSK);

if(input(ADDO)) Count++;

output_high(ADSK);

Count=Count|0x80;

output_low(ADSK);
convert_1=MAKE8(Count, 0);

convert_2=MAKE8(Count, 1);

convert_3=MAKE8(Count, 2);

convert_2=(convert_2 & 0b11111000);

Count= MAKE16(convert_3, convert_2);

return(Count);

unsigned int donvi ,chuc ,tram ,nghin;

void main(){

lcd_init();

unsigned int16 weighs, weigh;

lcd_gotoxy(1,1);

printf(lcd_putc, " Load Cell HX711 ");

delay_ms(1000);

weigh = ReadCount();

while(true){

lcd_gotoxy(1,1);

//printf(lcd_putc, " -------------- ");

printf(lcd_putc, " Load Cell HX711 ");

lcd_gotoxy(1,2);

weighs = ReadCount()-weigh;

if(weighs > 10000)

weighs = 0;
printf(lcd_putc, " Weigh %lu g ", weighs);

else

if(weighs < 1000){

printf(lcd_putc, " Weigh %lu g ", weighs);

else{

donvi = weighs % 10;

chuc = (weighs/10) % 10;

tram = (weighs/100) % 10;

nghin = (weighs/1000) % 10;

printf(lcd_putc, " Weigh %d.%d%d%d Kg", nghin, tram, chuc, donvi);

You might also like