L7800AB/AC Series: Feature Summary

Download as pdf or txt
Download as pdf or txt
You are on page 1of 28

L7800AB/AC series

Precision 1A regulators

Feature summary
■ Output current in excess of 1A
■ Output voltages of 5; 6; 8; 9; 12; 15; 18; 20; 24V
■ Thermal overload protection
■ Output transition SOA protection
■ 2% Output voltage tolerance
■ Guaranteed in extended temperature range TO-220 TO-220FP

Description
The L7800A series of three terminal positive
regulators is available in TO-220, TO-220FP, and
D2PAK packages and several fixed output
D2PAK
voltages, making it useful in a wide range of
applications. These regulators can provide local
on-card regulation, eliminating the distribution deliver over 1A output current, Although designed
problem associated with single point regulation. primarily as fixed voltage regulators, these
Each type employs internal current limiting, devices can be used with external components to
thermal shut-down and safe area protection, obtain adjustable voltage and currents.
making it essentially indestructible. If adequate
heat sinking is provided, they can

Schematic diagram

January 2007 Rev. 11 1/28


www.st.com 28
L7800AB/AC series

Contents

1 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3 Test circuits ............................................... 5

4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5.1 Design consideration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7 Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

2/28
L7800AB/AC series Pin configuration

1 Pin configuration

Figure 1. Pin connections (top view)

TO-220 TO-220FP

D2PAK

Figure 2. Schematic diagram

3/28
Maximum ratings L7800AB/AC series

2 Maximum ratings

Table 1. Absolute maximum ratings


Symbol Parameter Value Unit

for VO= 5 to 18V 35


VI DC Input voltage V
for VO= 20, 24V 40
IO Output current Internally Limited mA
PD Power dissipation Internally Limited mW
TSTG Storage temperature range -65 to 150 °C
for L7800AC 0 to 150
TOP Operating junction temperature range °C
for L7800AB -40 to 125

Note: Absolute Maximum Ratings are those values beyond which damage to the device may
occur. Functional operation under these condition is not implied

Table 2. Thermal Data


Symbol Parameter TO-220 TO-220FP D2PAK Unit

RthJC Thermal resistance junction-case 3 5 3 °C/W


RthJA Thermal resistance junction-ambient 50 60 62.5 °C/W

Figure 3. Application circuits

4/28
L7800AB/AC series Test circuits

3 Test circuits

Figure 4. DC Parameter

Figure 5. Load regulation

Figure 6. Ripple rejection

5/28
Electrical characteristics L7800AB/AC series

4 Electrical characteristics

Table 3. Electrical characteristics of L7805A (VI = 10V, IO=1A, TJ = 0 to 150°C (L7805AC),


TJ = -40 to 125°C (L7805AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 4.9 5 5.1 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 4.8 5 5.2 V
VI = 7.5 to 20V
VI = 7.5 to 25V, IO = 500 mA 7 50 mV
VI = 8 to 12V 10 50 mV
∆VO (1) Line regulation
VI = 8 to 12V, TJ = 25°C 2 25 mV
VI = 7.3 to 20V, TJ = 25°C 7 50 mV
IO = 5mA to 1A 25 100 mV
∆VO(*) Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 8 50 V
TJ = 25°C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 8 to 25V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 7.5 to 20V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
SVR Supply voltage rejection VI = 8 to 18V, f = 120Hz, IO = 500mA 68 dB
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 17 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -1.1 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

6/28
L7800AB/AC series Electrical characteristics

Table 4. Electrical characteristics of L7806A (VI = 11V, IO=1A, TJ = 0 to 150°C (L7806AC),


TJ = -40 to 125°C (L7806AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 5.88 6 6.12 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 5.76 6 6.24 V
VI = 8.6 to 21V
VI = 8.6 to 25V, IO = 500 mA 9 60 mV
VI = 9 to 13V 11 60 mV
∆VO (1) Line regulation
VI = 9 to 13V, TJ = 25°C 3 30 mV
VI = 8.3 to 21V, TJ = 25°C 9 60 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 9 to 25V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 8.6 to 21V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
SVR Supply voltage rejection VI = 9 to 19V, f = 120Hz, IO = 500mA 65 dB
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 17 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -0.8 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

7/28
Electrical characteristics L7800AB/AC series

Table 5. Electrical characteristics of L7808A (VI = 14V, IO=1A, TJ = 0 to 150°C (L7808AC),


TJ = -40 to 125°C (L7808AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 7.84 8 8.16 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 7.7 8 8.3 V
VI = 10.6 to 23V
VI = 10.6 to 25V, IO = 500 mA 12 80 mV
VI = 11 to 17V 15 80 mV
∆VO (1) Line regulation
VI = 11 to 17V, TJ = 25°C 5 40 mV
VI = 10.4 to 23V, TJ = 25°C 12 80 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 11 to 25V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 10.6 to 23V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
VI = 11.5 to 21.5V, f = 120Hz,
SVR Supply voltage rejection 62 dB
IO = 500mA
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 18 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -0.8 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

8/28
L7800AB/AC series Electrical characteristics

Table 6. Electrical characteristics of L7809A (VI = 15V, IO=1A, TJ = 0 to 150°C (L7809AC),


TJ = -40 to 125°C (L7809AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 8.82 9 9.18 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 8.65 9 9.35 V
VI = 10.6 to 23V
VI = 10.6 to 25V, IO = 500 mA 12 90 mV
VI = 11 to 17V 15 90 mV
∆VO (1) Line regulation
VI = 11 to 17V, TJ = 25°C 5 45 mV
VI = 10.4 to 23V, TJ = 25°C 12 90 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.3 6 mA
Iq Quiescent current
6 mA
VI = 11 to 25V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 10.6 to 23V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
VI = 11.5 to 21.5V, f = 120Hz,
SVR Supply voltage rejection 61 dB
IO = 500mA
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 18 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -0.8 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

9/28
Electrical characteristics L7800AB/AC series

Table 7. Electrical characteristics of L7812A (VI = 19V, IO=1A, TJ = 0 to 150°C (L7812AC),


TJ = -40 to 125°C (L7812AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 11.75 12 12.25 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 11.5 12 12.5 V
VI = 14.8 to 27V
VI = 14.8 to 30V, IO = 500 mA 13 120 mV
VI = 16 to 12V 16 120 mV
∆VO (1) Line regulation
VI = 16 to 12V, TJ = 25°C 6 60 mV
VI = 14.5 to 27V, TJ = 25°C 13 120 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.4 6 mA
Iq Quiescent current
6 mA
VI = 15 to 30V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 14.8 to 27V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
SVR Supply voltage rejection VI = 15 to 25V, f = 120Hz, IO = 500mA 60 dB
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 18 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -1 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

10/28
L7800AB/AC series Electrical characteristics

Table 8. Electrical characteristics of L7815A (VI = 23V, IO=1A, TJ = 0 to 150°C (L7815AC),


TJ = -40 to 125°C (L7815AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 14.7 15 15.3 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 14.4 15 15.6 V
VI = 17.9 to 30V
VI = 17.9 to 30V, IO = 500 mA 13 150 mV
VI = 20 to 26V 16 150 mV
∆VO (1) Line regulation
VI = 20 to 26V, TJ = 25°C 6 75 mV
VI = 17.5 to 30V, TJ = 25°C 13 150 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.4 6 mA
Iq Quiescent current
6 mA
VI = 17.5 to 30V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 17.5 to 30V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
VI = 18.5 to 28.5V, f = 120Hz,
SVR Supply voltage rejection 58 dB
IO = 500mA
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 19 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -1 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

11/28
Electrical characteristics L7800AB/AC series

Table 9. Electrical characteristics of L7818A (VI = 27V, IO=1A, TJ = 0 to 150°C (L7818AC),


TJ = -40 to 125°C (L7818AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 17.64 18 18.36 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 17.3 18 18.7 V
VI = 21 to 33V
VI = 21 to 33V, IO = 500 mA 25 180 mV
VI = 24 to 30V 28 180 mV
∆VO (1) Line regulation
VI = 24 to 30V, TJ = 25°C 10 90 mV
VI = 20.6 to 33V, TJ = 25°C 5 180 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.5 6 mA
Iq Quiescent current
6 mA
VI = 21 to 33V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 21 to 33V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
SVR Supply voltage rejection VI = 22 to 32V, f = 120Hz, IO = 500mA 57 dB
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 19 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -1 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

12/28
L7800AB/AC series Electrical characteristics

Table 10. Electrical characteristics of L7820A (VI = 28V, IO=1A, TJ = 0 to 150°C (L7820AC),
TJ = -40 to 125°C (L7820AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 19.6 20 20.4 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 19.2 20 20.8 V
VI = 23 to 35V
VI = 23 to 35V, IO = 500 mA 200 mV
VI = 26 to 32V 200 mV
∆VO (1) Line regulation
VI = 26 to 32V, TJ = 25°C 100 mV
VI = 23 to 32V, TJ = 25°C 200 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.5 6 mA
Iq Quiescent current
6 mA
VI = 23 to 35V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 23 to 35V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
SVR Supply voltage rejection VI = 24 to 35V, f = 120Hz, IO = 500mA 56 dB
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 20 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -1 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

13/28
Electrical characteristics L7800AB/AC series

Table 11. Electrical characteristics of L7824A (VI = 33V, IO=1A, TJ = 0 to 150°C (L7824AC),
TJ = -40 to 125°C (L7824AB), unless otherwise specified)
Symbol Parameter Test conditions Min. Typ. Max. Unit

VO Output voltage TJ = 25°C 19.6 20 20.4 V


IO = 5mA to 1A, PO ≤15W
VO Output voltage 19.2 20 20.8 V
VI = 27.3 to 38V
VI = 27 to 38V, IO = 500 mA 200 mV
VI = 30 to 36V 200 mV
∆VO (1) Line regulation
VI = 30 to 36V, TJ = 25°C 100 mV
VI = 26.7 to 38V, TJ = 25°C 200 mV
IO = 5mA to 1A 25 100 mV
∆VO (1)
Load regulation IO = 5mA to 1.5A, TJ = 25°C 30 100 V
IO = 250 to 750mA 10 50 V
TJ = 25°C 4.5 6 mA
Iq Quiescent current
6 mA
VI = 27.3 to 38V, IO = 500 mA 0.8 mA
∆Iq Quiescent current change VI = 27.3 to 38V, TJ = 25°C 0.8 mA
IO = 5mA to 1A 0.5 mA
SVR Supply voltage rejection VI = 28 to 38V, f = 120Hz, IO = 500mA 56 dB
Vd Dropout voltage IO = 1A, TJ = 25°C 2 V
eN Output noise voltage TA = 25°C, B =10Hz to 100KHz 10 µV/VO
RO Output resistance f =1KHz 20 mΩ
Isc Short circuit current VI = 35V, TA = 25°C 0.2 A
Iscp Short circuit peak current TJ = 25°C 2.2 A
∆VO/∆T Output voltage drift -1 mV/°C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.

14/28
L7800AB/AC series Application information

5 Application information

5.1 Design consideration


The L7800A Series of fixed voltage regulators are designed with Thermal Overload
Protection that shuts down the circuit when subjected to an excessive power overload
condition, Internal Short-circuit Protection that limits the maximum current the circuit will
pass, and Output transistor Safe-Area Compensation that reduces the output short-circuit
current as the voltage across the pass transistor is increased. In many low current
applications, compensation capacitors are not required. However, it is recommended that
the regulator input be bypassed with capacitor if the regulator is connected to the power
supply filter with long lengths, or if the output load capacitance is large. An input bypass
capacitor should be selected to provide good high frequency characteristics to insure stable
operation under all load conditions. A 0.33µF or larger tantalum, mylar or other capacitor
having low internal impedance at high frequencies should be chosen. The bypass capacitor
should be mounted with the shortest possible leads directly across the regulators input
terminals. Normally good construction techniques should be used to minimize ground loops
and lead resistance drops since the regulator has no external sense lead.
The addition of an operational amplifier allows adjustment to higher or intermediate values
while retaining regulation characteristics. The minimum voltage obtained with the
arrangement is 2V greater than the regulator voltage.
The circuit of figure 6 can be modified to provide supply protection against short circuit by
adding a short circuit sense resistor, RSC, and an additional PNP transistor. The current
sensing PNP must be able to handle the short circuit current of the three terminal regulator
Therefore a four ampere plastic power transistor is specified.

Figure 7. DC Parameter

IO = VXX/R1+Id

15/28
Application information L7800AB/AC series

Figure 8. DC Parameter

VO = 7 to 20V

VI - VO ≥ 2V

Figure 9. DC Parameter

VBEQ1
R1 = ______________
IREQ-(IQ1/βQ1)

VBEQ1
IO = IREG + Q1 (IREG ______)
R1

16/28
L7800AB/AC series Application information

Figure 10. DC Parameter

17/28
Package mechanical data L7800AB/AC series

6 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK®


packages. These packages have a Lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.

18/28
L7800AB/AC series Package mechanical data

TO-220 MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
C 1.23 1.32 0.048 0.051
D 2.40 2.72 0.094 0.107
D1 1.27 0.050
E 0.49 0.70 0.019 0.027
F 0.61 0.88 0.024 0.034
F1 1.14 1.70 0.044 0.067
F2 1.14 1.70 0.044 0.067
G 4.95 5.15 0.194 0.203
G1 2.4 2.7 0.094 0.106
H2 10.0 10.40 0.393 0.409
L2 16.4 0.645
L4 13.0 14.0 0.511 0.551
L5 2.65 2.95 0.104 0.116
L6 15.25 15.75 0.600 0.620
L7 6.2 6.6 0.244 0.260
L9 3.5 3.93 0.137 0.154
DIA. 3.75 3.85 0.147 0.151

P011C

19/28
Package mechanical data L7800AB/AC series

TO-220FP MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
E 0.45 0.70 0.017 0.027
F 0.75 1 0.030 0.039
F1 1.15 1.50 0.045 0.059
F2 1.15 1.50 0.045 0.059
G 4.95 5.2 0.194 0.204
G1 2.4 2.7 0.094 0.106
H 10.0 10.40 0.393 0.409
L2 16 0.630
L3 28.6 30.6 1.126 1.204
L4 9.8 10.6 0.385 0.417
L5 2.9 3.6 0.114 0.142
L6 15.9 16.4 0.626 0.645
L7 9 9.3 0.354 0.366
DIA. 3 3.2 0.118 0.126

7012510A-H

20/28
L7800AB/AC series Package mechanical data

Figure 11. DRAWING DIMENSION D2PAK (TYPE STD-ST)

0079457/L

21/28
Package mechanical data L7800AB/AC series

Figure 12. DRAWING DIMENSION D2PAK (TYPE WOOSEOK-SUBCON.)

0079457/L

22/28
L7800AB/AC series Package mechanical data

Table 12. D2PAK MECHANICAL DATA


TYPE STD-ST TYPE WOOSEOK-SUBCON.

DIM. mm. mm.

MIN. TYP. MAX. MIN. TYP. MAX.

A 4.40 4.60 4.30 4.70


A1 0.03 0.23 0 0.20
b 0.70 0.93 0.70 0.90
b2 1.14 1.70 1.17 1.37
c 0.45 0.60 0.45 0.50 0.60
c2 1.23 1.36 1.25 1.30 1.40
D 8.95 9.35 9 9.20 9.40
D1 7.50 7.50
E 10 10.40 9.80 10.20
E1 8.50 7.50
e 2.54 2.54
e1 4.88 5.28 5.08
H 15 15.85 15 15.30 15.60
J1 2.49 2.69 2.20 2.60
L 2.29 2.79 1.79 2.79
L1 1.27 1.40 1 1.40
L2 1.30 1.75 1.20 1.60
R 0.4 0.30
V2 0° 8° 0° 3°

Note: The D2PAK package coming from the subcontractor Wooseok is fully compatible with the
ST's package suggested footprint.

23/28
Package mechanical data L7800AB/AC series

Figure 13. D2PAK FOOTPRINT RECOMMENDED DATA

Table 13. FOOTPRINT DATA


VALUES

mm. inch.

A 12.20 0.480
B 9.75 0.384
C 16.90 0.665
D 3.50 0.138
E 1.60 0.063
F 2.54 0.100
G 5.08 0.200

24/28
L7800AB/AC series Package mechanical data

Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.

A 180 7.086

C 12.8 13.0 13.2 0.504 0.512 0.519

D 20.2 0.795

N 60 2.362

T 14.4 0.567

Ao 10.50 10.6 10.70 0.413 0.417 0.421

Bo 15.70 15.80 15.90 0.618 0.622 0.626

Ko 4.80 4.90 5.00 0.189 0.193 0.197

Po 3.9 4.0 4.1 0.153 0.157 0.161

P 11.9 12.0 12.1 0.468 0.472 0.476

25/28
Order code L7800AB/AC series

7 Order code

Table 14. Order code


Packaging
Part numbers Output voltage
TO-220 TO-220FP D2PAK

L7805AB L7805ABV L7805ABP L7805ABD2T-TR 5V


L7805AC L7805ACV L7805ACP L7805ACD2T-TR 5V
L7806AB L7806ABV L7806ABP (1)
L7806ABD2T-TR 6V
(1)
L7806AC L7806ACV L7806ACP L7806ACD2T-TR 6V
L7808AB L7808ABV L7808ABP L7808ABD2T-TR 8V
L7808AC L7808ACV L7808ACP L7808ACD2T-TR 8V
L7809AB L7809ABV L7809ABP L7809ABD2T-TR 9V
L7809AC L7809ACV L7809ACP L7809ACD2T-TR 9V
L7812AB L7812ABV L7812ABP(1) L7812ABD2T-TR 12 V
L7812AC L7812ACV L7812ACP L7812ACD2T-TR 12 V
L7815AB L7815ABV L7815ABP L7815ABD2T-TR 15 V
L7815AC L7815ACV L7815ACP (1)
L7815ACD2T-TR 15 V
L7818AB L7818ABV L7818ABP L7818ABD2T-TR (1) 18 V
L7818AC L7818ACV L7818ACP (1) (1)
L7818ACD2T-TR 18 V
L7820AB L7820ABV (1) (1) (1)
L7820ABP L7820ABD2T-TR 20 V
(1) (1)
L7820AC L7820ACV L7820ACP L7820ACD2T-TR 20 V
L7824AB L7824ABV L7824ABP L7824ABD2T-TR (1) 24 V
L7824AC L7824ACV L7824ACP (1) L7824ACD2T-TR (1)
24 V
1. Available on request.

26/28
L7800AB/AC series Revision history

8 Revision history

Table 15. Revision history


Date Revision Changes

21-Jun-2004 9 Document updating.


04-Aug-2006 10 Order Codes has been updated and new template.
19-Jan-2007 11 D2PAK mechanical data has been updated and add footprint data.

27/28
L7800AB/AC series

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2007 STMicroelectronics - All rights reserved

STMicroelectronics group of companies


Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

28/28

You might also like