Scribd
Upload
57 views3 pages

Lab No - Doc2

The document describes the construction and operation of an impulse turbine for power generation. It discusses the main components of a Pelton wheel turbine including the nozzle, runner buckets, casing, and breaking jet. Water flows through the nozzle where its pressure energy is converted to kinetic energy before striking the buckets on the turbine's runner. This spins the runner and converts the water's hydraulic energy to mechanical energy, which can then be used to generate electricity. The speed of the turbine is maintained through a governing mechanism that regulates the flow of water through the nozzle based on load conditions.

Uploaded by

Faiza Iqbal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
57 views3 pages

Lab No - Doc2

The document describes the construction and operation of an impulse turbine for power generation. It discusses the main components of a Pelton wheel turbine including the nozzle, runner buckets, casing, and breaking jet. Water flows through the nozzle where its pressure energy is converted to kinetic energy before striking the buckets on the turbine's runner. This spins the runner and converts the water's hydraulic energy to mechanical energy, which can then be used to generate electricity. The speed of the turbine is maintained through a governing mechanism that regulates the flow of water through the nozzle based on load conditions.

Uploaded by

Faiza Iqbal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

lab manual Power Generation

Lab no: 1

Title:
To investigate construction and operation of impulse turbine for
power generation
Apparatus:
 Techometer
 Spear
 Buckets
 Runner
 Penstock
 Model of Pelton Wheel Turbine.Nozzle
 Flow regulating arrangemnet

Turbine:
Turbine is a machine for producing continuous power in which wheel or
rotor typically fitted with blades is made to revolve by fast moving flow of
water steam or gas.
Types:
1. Gas turbine
2. Hydraulic turbine
3. Steam turbine

Theory:
Hydraulic machines are defined as those machines which convert either
hydraulic energy (energy possessed by water) into mechanical energy or
mechanical energy into hydraulic energy.
Turbines are defined as hydraulic machines which convert hydraulic
energy into mechanical energy. Hydraulic turbines are of different types
according to specification and Pelton wheel or turbine is one of the types
of hydraulic turbines.
Pelton Wheel or Turbine:
The Pelton wheel or Pelton turbine is a tangential flow impulse turbine.The
water strikes the bucket along the tangent of the runner. The energy available
at the inlet of the turbine is only kinetic energy. The pressure at the inlet and
outlet of the turbine is atmospheric. The turbine is used for high heads and is
named after L.A Pelton, an American Engineer.
Constructional Details: -
lab manual Power Generation

The main parts of the pelton turbine are: -


1. Nozzle and flow regulating arrangement.
2. Runner and buckets.
3. Casing.
4. Breaking Jet.
1. Nozzle and flow regulating arrangement:
The amount of water striking the buckets of the runner is controlled by
providing a spear in the nozzle. The spear is a conical needle which is
operated either by a hand wheel or automatically in an axial direction
depending upon the size of the unit. When the spear is pushed forward into
the nozzle the amount of water striking the runner is reduced. On the other
hand if the spear is pushed back, the amount of water striking the runner
increases.
2. Runner with buckets:
It consists of a circular disc on the periphery of which a number of buckets
evenly spaced are fixed. The shape of the buckets is of a double
hemispherical cup or bowl. Each bucket is divided into two hemispherical
parts by a dividing wall which is known as splitter.
3. Casing:
The function of the casing is to prevent the splashing of the water and to
discharge water to tail race. It also acts as a safeguard against accidents. It is
made of cast iron or fabricated steel plates. As pelton wheel is an impulse
turbine, the casing of the pelton wheel does not perform any hydraulic
function.
4. Breaking Jet:
When the nozzle is completely closed by moving the spear in the forward
direction the amount of water striking the runner reduces to zero. But the
runner due to inertia goes on revolving for a long time. To stop the runner in
a short time, a small nozzle is provided which directs the Jet of water on the
back of the buckets. This Jet of water is called breaking Jet.
Working of Pelton wheel Turbine:
The water from the reservoir flows through the penstocks at the outlet of
which a nozzle is fitted. The nozzle increases the kinetic energy of the water
flowing through the penstock by converting pressure energy into kinetic
energy. At the outlet of the nozzle, the water comes out in the form of a Jet
and strikes on the splitter, which splits up the jet into two parts. These parts
of the Jet, glides over the inner surfaces and comes out at the outer edge. The
buckets are shaped in such a way that buckets rotates, runner of the turbine
rotates and thus hydraulic energy of water gets converted into mechanical
lab manual Power Generation

energy on the runner of turbine which is further converted into electrical


energy in a generator/alternator.
Specifications: -
1. Type – Impulse (free jet) turbine.
2. Type of flow – Tangential.
3. Head – more than 250m (high)
4. Mainly Runner shaft is horizontal in pelton turbine.
5. Specific Speed – 8 to 30 for one nozzle (low)
Up to 50 for more than one nozzle.
6. Discharge – low.
Governing mechanism:
Speed of the turbine runner is required to be maintained constant so that the
electric generator coupled directly to the turbine shaft runs at constant speed
under varying load conditions. With increase in load, the runner speed falls
and consequently balls of the centrifugal governor move inwards. Through
suitable linkages, the resulting downward movement of the governor sleeve
is transmitted to a relay or control valve which admits oil under pressure to a
servomotor. The oil exerts a force on the piston of the servomotor, and that
pushes the spear to a position which increases the annular area of the nozzle
flow passage.Quantum of water striking the buckets is then increased and
the normalturbine speed is restored.

Diagram:

You might also like